Total and Partial Fat Replacement by Gelled Emulsion (Hemp Oil and Buckwheat Flour) and Its Impact on the Chemical, Technological and Sensory Properties of Frankfurters

Application of fat replacers in low-fat starch-based foods: Type, formulation and action mechanism on food quality

Fat is an essential component in the processing of starch-based products. However, excessive fat intake is not beneficial to human health. Therefore, the development of fat replacers (FRs) and healthy and delicious low-fat starch-based products has become a research focus. The regulation mechanisms of fat on the quality of starch-based products, and types and formulations of FRs used in starch-based products were summarized. Based on the interaction with starch, the regulation mechanism of FRs on the quality of starch-based products and main quality evaluation parameters of low-fat starch-based products formed by these FRs were discussed. Oil-free systems (particles, polymers, hydrocolloids) and oil-containing systems (emulsions, emulsion gels, oleogels) are the main FRs used in starch-based foods. Their formulations depend mainly on the interaction between the components (polysaccharides, proteins and fats). Regulation mechanisms of FRs on the quality of starch-based products are mainly due to that their addition changes the structure, physicochemical and functional properties of starch. Microstructure, textural, rheological and tribological properties, sensory evaluation, fat digestion and calories, and nutrition are main elements of quality evaluation of low-fat starch-based products containing FRs. Next, it is necessary to systematically explore the regulation mechanism of FRs with different structures and properties on the quality of starch-based products based on molecular simulation and machine learning. More interdisciplinary collaborations, such as molecular chemistry, nutrition and nanotechnology, need to be used to guide the design of FRs and the development of low-fat starch-based products.

Substitution of Animal Fat and Sodium Nitrite with Hemp Seed Oil: Effect on the Nutritional Value, Sensory Characteristics, and Shelf Life of Fermented Salami

Recently, products of plant origin have been utilized to extend the shelf life of meat products. This study examined the impact of hemp seed oil as a replacement for animal fat and sodium nitrite on the nutritional, physicochemical, technological, and sensory traits of fermented salamis. Five treatments were prepared: S0 (100 mg/kg NaNO2), S1 (2% hemp oil and 50 mg/kg NaNO2), S2 (4% hemp oil and 50 mg/kg NaNO2), S3 (2% hemp oil), and S4 (4% hemp oil). The addition of hemp seed oil did not affect proximate composition but improved fatty acid composition and lipid quality nutritional indices. Microbial growth was consistent across all treatments. Active acidity (pH) and water activity (aw) were influenced by hemp seed oil and/or sodium nitrite. Salamis containing only hemp seed oil exhibited lower redness and chroma values during storage. Hemp seed oil led to higher lipid peroxidation, mitigated by sodium nitrite. The addition of hemp seed oil and varying levels of sodium nitrite significantly impacted salami texture. Sensory evaluation showed consumer acceptance of hemp seed oil-enhanced salamis. In conclusion, hemp seed oil can be used as a functional ingredient to improve the nutritional value and healthiness of fermented meat products when combined with reduced sodium nitrite content.

Recent trends in design of healthier fat replacers: Type, replacement mechanism, sensory evaluation method and consumer acceptance

In recent years, with the increasing awareness of consumers about the relationship between excessive fat intake and chronic diseases, such as obesity, heart disease, diabetes, etc., the demand for low-fat foods has increased year by year. However, a simple reduction of fat content in food will cause changes in physical and chemical properties, physiological properties, and sensory properties of food. Therefore, developing high-quality fat replacers to replace natural fats has become an emerging trend, and it is still a technical challenge to completely simulate the special function of natural fat in low-fat foods. This review aims to provide an overview of development trends of fat replacers, and the different types of fat replacers, the potential fat replacement mechanisms, sensory evaluation methods, and their consumer acceptance are discussed and compared, which may provide a theoretical guidance to produce fat replacers and develop more healthy low-fat products favored by consumers.

Lyophilized Avocado Paste Improves Corn Chips' Nutritional Properties and Sensory Acceptability

Avocado paste (AP) is an industrial byproduct and a potential source of bioactive compounds, so there is great interest in its valorization. The objective of the present study was to evaluate the effects of adding AP to corn chips regarding their nutritional profile and sensory acceptability. Three AP-supplemented corn chip samples were prepared (C-2%, C-6%, and C-10%), along with a control chip (C), whose total phenolics, flavonoids, antioxidant capacity, proximate composition, minerals, fatty acids, and sensory acceptability were evaluated. Regarding the content of phenolic compounds and flavonoids, significant increases were found between all samples (p < 0.05), particularly between C and C-10% (from 0.93 to 3.56 mg GAE/g dw and 1.17 to 6.61 mg QE/g dw, respectively). Their antioxidant capacity also increased significantly (p < 0.05) with all methods used (FRAP, DPPH, ORAC, and TEAC). Regarding the sensory analysis, no significant differences were found (p > 0.05) between C and C-2% in the parameters of smell, color, flavor, and overall acceptability; however, the texture of C-2% was better evaluated. The C-2% sample also had the highest acceptability; 82% of the participants mentioned that they would buy the C-2%, higher than the rest of the samples. These results suggest the feasibility of adding 2% AP as a strategy to improve the nutritional properties of corn chips without compromising their sensory acceptability; therefore, AP may be used as a food ingredient.

The effects of modified quinoa protein emulsion as fat substitutes in frankfurters

In the current study, the effects of replacing different proportions of pork back fat (0, 25, 50, 75, and 100%) with high-pressure homogenization-modified quinoa protein emulsions (HMQE) on the physicochemical, water distribution, and rheological properties of low-fat frankfurters were investigated. HMQE incorporation significantly increased the moisture, ash, protein content, pH and L^⁎ values and decreased the a^⁎ and b^⁎ values and T₂ relaxation time of the low-fat frankfurters (P < 0.05). Of note, 50% fat substitution by HMQE yielded higher WHC, textural properties, gel strength, immobilized water percentage and G' value of the frankfurters than others. HMQE incorporation changed the protein secondary structure from α-helix to β-sheet, forming a compact and uniform gel network structure with small cavities. Moreover, 50% fat substitution by HMQE did not affect sensory characteristics and improved the fat oxidative stability during storage. Therefore, the incorporation of HQME as a partial fat substitute resulted in nutritional benefits and quality enhancements, indicating that HQME could serve as a promising fat alternative in manufacturing low-fat frankfurters with desirable attributes.

Healthier Oils: A New Scope in the Development of Functional Meat and Dairy Products: A Review

In the present day, it has been widely established that a high intake of animal fat that contains a high content of saturated fatty acids may cause several life-threatening diseases, including obesity, diabetes-type 2, cardiovascular diseases, as well as several types of cancer. In this context, a great number of health organizations and government agencies have launched campaigns to reduce the saturated fat content in foods, which has prompted the food industry, which is no stranger to this problem, to start working to develop foods with a lower fat content or with a different fatty acid profile. Nevertheless, this is not an easy task due to the fact that saturated fat plays a very important role in food processing and in the sensorial perception of foods. Actually, the best way to replace saturated fat is with the use of structured vegetable or marine oils. The main strategies for structuring oils include pre-emulsification, microencapsulation, the development of gelled emulsions, and the development of oleogels. This review will examine the current literature on the different (i) healthier oils and (ii) strategies that will be potentially used by the food industry to reduce or replace the fat content in several food products.

The use of buckwheat flour in the technology of semi-smoked sausage

This article aims to substantiate the use of buckwheat flour in the technology of semi-smoked sausage based on the study of physicochemical, functional and technological, structural and mechanical and organoleptic parameters. It has been found that a small amount of buckwheat flour in semi-smoked sausage samples (up to 10.0% by weight of unsalted raw material) increases the moisture-binding capacity of the control sample by 1.1-1.8%. The study of the shear stress limit of the finished experimental samples showed that the maximum value of this parameter is 758 Pa. With increasing the dosage of hydrated buckwheat flour, the minced meat loosens, and the value of the shear stress limit in samples No.3 and  No.4 is 420 and 390 Pa. The appearance, color, smell, aroma, consistency, taste and juiciness were studied in the produced samples of semi-smoked sausage. Histological examination of an experimental sample of semi-smoked sausage with a level of hydrated buckwheat flour of 6% was carried out. It has been found that introducing hydrated buckwheat flour into the minced meat up to 6% of the mass of raw meat material has a positive effect on the physical and chemical, functional and technological, structural and mechanical and organoleptic parameters of semi-smoked sausage.

Developing a novel method to measure texture changes of semi-solid food during a continuous compressive motion with high deformation using repeatable dual extrusion cell (RDEC)

Mechanical changes during mastication are difficult to evaluate without using a novel method because the size of the sample is continuously and randomly reduced. The repeatable dual extrusion cell (RDEC) has been developed to measure the breakdown characteristics of a semi-solid food (i.e., minced pork gel) from initial solid states to a small particle size during repeated high deformation compressive motions. The force-time curve of RDEC was recorded, followed by a calculation of work values for each cycle and fitted by Peleg's model. The decrease of k₁ (1.7-1.19) and k₂ (1.56-1.42) values in Peleg's model with an increase of moisture content (56.5-62.5 %) indicated the easily deformable characteristics of soft food. During RDEC measurement, as long as the characteristic length of the sample was larger than the diameter of RDEC probe hole (>4.5 mm), the initial sample size showed no significant influence (p < 0.05) on the measurements. RDEC demonstrated similar ratios of particulate size with human subjects up till 20 cycles of processing. The equilibrium force value from RDEC and SEM images demonstrate that the connective tissue in pork gel mainly contributed to the end-product texture properties after continuous mastication. This study provided an application of the novel RDEC device to estimate the texture and structural changes of minced pork gel under a continuous high deformation compressive motion.

Physicochemical properties and microstructure of composite surimi gels: The effects of ultrasonic treatment and olive oil concentration

This study was conducted to evaluate the effects of extra virgin olive (EVO) oil incorporation on the physicochemical properties and microstructure of surimi gels subjected to ultrasound-assisted water-bath heating. As the oil content was increased from 0 to 5 g/100 g, the breaking force and gel strength of the surimi gels significantly decreased, while the whiteness level exhibited the opposite tendency irrespective of the heating method. Compared with the traditional water-bath heating method, the ultrasonic heating promoted the unfolding of the α-helix structure and intensified the formation of β-sheet content and non-covalent bonds (ionic bonds, hydrogen bonds, and disulfide bonds), especially disulfide bonds, which contributed to the further crosslinking of the proteins and to gelation, thereby improving the gels' strength. In addition, smaller cavities and compact microstructures were observed in the low-oil (≤3 g/100 g) surimi gels under ultrasonic treatment, which effectively prevented water migration in the gel network and resulted in a high water holding capacity and uniform water distribution. However, the ultrasonic treatment barely remedied the poor microstructures of the high-oil (>3 g/100 g) surimi gels owing to oil coalescence, which weakened the protein-protein interaction. In conclusion, ultrasonic treatment combined with water-bath heating significantly improved the gelation properties of the low-oil surimi gels, although it did not remarkably improve those of the high-oil gels. The choice of a suitable oil concentration could be of great importance for the production and functioning of surimi products via ultrasound-assisted treatments.

Are quinoa proteins a promising alternative to be applied in plant-based emulsion gel formulation?

Emulsion gels are structured emulsion systems that behave as soft solid-like materials. Emulsion gels are commonly used in food-product design both as fat replacers and as delivery carriers of bioactive compounds. Different plant-derived proteins like soy, chia, and oat have been used in emulsion gel formulation to substitute fat in meat products and to deliver some vegetable dyes or extracts. Quinoa protein isolates have been scarcely applied in emulsion gel formulation although they seem to be a promising alternative as emulsion stabilizers. Quinoa protein isolates have a high protein content with a well-balanced amino acid profile and show good emulsifying and gelling capabilities. Unlike quinoa starch, quinoa protein isolates do not require any chemical modification before being used. The present article reviews the state of the art in food emulsion gels stabilized with vegetable proteins and highlights the potential uses of quinoa proteins in emulsion gel formulation.

Cocoa Coproducts-Based and Walnut Oil Gelled Emulsion as Animal Fat Replacer and Healthy Bioactive Source in Beef Burgers

The aim of this work was to evaluate the effects on the chemical, physic-chemical, technological, and sensory properties of beef burger when replacing different quantities of fat (50 and 100%) with different levels of oil-in-water-gelled emulsion elaborated with walnut oil and cocoa bean shell flour (GECW). The chemical composition of the samples was affected by the fat replacement. The reformulation increased the moisture and ash content while the fat and protein content decreased with respect to the control sample. The linolenic and linolenic acid content of the beef burgers increased as the GECW replacement was augmented. The polyunsaturated fatty/saturated fatty acid ratio increased in both raw and cooked burgers, whereas the atherogenicity index and thrombogenicity index were reduced in both raw and cooked burgers with respect to the control sample. The use of GECW as a fat replacer was found to be effective in improving the cooking loss. Similarly, there were positive effects on reductions in the diameter and the increases in the thickness of the beef burgers. Regarding lipid stability, in both the raw and cooked burgers, the reformulation increased the 2-thiobarbituric acid reactive substance (TBARs) values with respect to the control sample. In both types of reformulated burgers, three bound polyphenols (mainly catechin and epicatechin) and two free polyphenols were identified, as were methylxanthines theobromine and caffeine. The sensory properties for the control and partial pork backfat replacement treatments were similar, while the sample with the total pork backfat replacement treatment showed the lowest scores. The blend of cocoa bean shell flour and walnut oil could be used as new ingredients for the development of beef burgers with a healthier nutritional profile without demeriting their sensory or cooking characteristics and physic-chemical properties.