Effects of Concentration of Soybean Protein Isolate and Maltose and Oil Phase Volume Fraction on Freeze-Thaw Stability of Pickering Emulsion

A novel Pickering emulsion stabilized solely by agar-glycine Maillard conjugates

A novel Pickering emulsifier was developed through the Maillard reaction between acidolyzed agar and glycine. The resulting agar-glycine (Agar-Gly) Maillard product particles effectively stabilized a long-term Pickering emulsion at low pH (as low as 3) and medium oil content (40 %-50 %) with a particle concentration of 1 %. Microstructural analysis revealed that Agar-Gly particles adsorbed around the droplets, forming a typical O/W Pickering emulsion. The formation of a dense and regular three-dimensional gel network around the droplets was crucial in restricting droplet movement and ensuring emulsion stability. This stability was significantly superior to emulsions stabilized solely with agar or a mixture of agar and glycine (Agar+Gly), owing to synergistic effects between particle interfacial layers and spatial site resistance. Incorporating the Agar-Gly Maillard product into low-fat mayonnaise not only markedly reduces its greasiness but also provides consumers with a low-fat, healthy alternative. Furthermore, Agar-Gly used as a Pickering stabilizer, it offers an easy mode of application for agar that does not require dissolution at elevated temperatures. This provides a straightforward and promising avenue for the use of agar in the high-value food industry.

Prospects of cowpea protein as an alternative and natural emulsifier for food applications: Effect of pH and oil concentration

In response to the growing need to expand the knowledge base on novel, more sustainable protein sources, this study investigated the effectiveness of cowpea protein concentrate (CPC) as a natural emulsifying agent, examining the relationships between pH (3-11), oil concentration (2-10 %), and emulsion stability. pH and oil concentration significantly impacted droplet size distribution, with uniformity decreasing in the order of pH 9 > pH 11 > pH 7, which was attributed to droplet coalescence and flocculation. As evidenced by circular dichroism, alkalinity induced a slight increase in the beta-sheet content of CPC, while simultaneously reducing the alpha-helix content. Rheological analysis of CPC-stabilized emulsions revealed a transition from shear-thinning to thickening flow behavior at higher shear rates. At pH 7, viscosity decreased with increasing oil concentration, whereas this effect was less pronounced in alkaline media. Alkalinity also prevented aggregation of oil droplets when emulsions were heated. At pH 3 and 5, phase separation occurred within 24 h. Emulsions at pH 9 and 11 exhibited the highest stability over a 30-day storage period, while the lowest stability (pH 7) was correlated with increased particle mobility. In most cases, at neutral and alkaline pH, CPC proved to be an effective emulsifying agent, demonstrating its ability to enhance stability by preventing coalescence and sedimentation.

Control of emulsion crystal growth in low-temperature environments

Currently, various types of emulsions can be applied to a wide range of systems. Emulsions are thermodynamically unstable systems, and their crystallization can be affected by a variety of factors. The nucleation and growth processes of emulsion crystal networks are determined on the basis of reported theoretical and experimental methods. The issues addressed include changes in the apparent crystal morphology of samples, changes in thermal properties with respect to temperature, changes in boundary conditions, and changes in the various applications of emulsions as feedstocks or in processing and storage methods. Changes in a variety of common emulsions during constant-temperature storage and unavoidable temperature fluctuations (e.g., multiple freeze-thaw cycles) are considered. Different methods for controlling the crystalline stability of these colloidal systems are also discussed. This review outlines the crystallization mechanism of emulsions during their food processing and storage.

Pickering Emulsion Stabilized by Different Concentrations of Whey Protein-Cress Seed Gum Nanoparticles

Nanoparticles based on food-grade materials are promising materials to develop Pickering emulsions for food applications. Initially, this study focuses on the development of nanoparticles through the utilization of a soluble complex of whey protein concentrate (WPC) and cress seed gum (CSG), which were modified by calcium chloride (CaCl2) as a cross-linker. The response surface methodology was used to investigate the impact of different concentrations of WPC (1-4% w/v), CSG (0-1% w/v), and CaCl2 (1-3 mM) on particle size, polydispersity index (PDI), and Zeta potential. The optimum conditions for the production of CSG-WPC nanoparticles (WPC-CSG NPs) were 0.31% (w/v) CSG, 1.75% (w/v) WPC, and 1.69 mM CaCl2, resulting in nanoparticles with average size of 236 nm and Zeta potential of -22 mV. Subsequently, oil-in-water (O/W) Pickering emulsions were produced with different concentrations of WPC-CSG NPs in optimum conditions. The contact angles of the WPC-CSG NPs were 41.44° and 61.13° at concentrations of 0.5% and 1%, respectively, showing that NPs are suitable for stabilizing O/W Pickering emulsions. Pickering emulsion viscosity rose from 80 to 500 mPa when nanoparticle concentration increased from 0.5% to 1%. Results also showed that WPC-CSG NPs enable stable O/W Pickering emulsions during storage and thermal treatment, confirming that protein-polysaccharide NPs can provide a sufficient steric hindrance.

High freeze-thaw stability of Pickering emulsion stabilized by SPI-maltose particles and its effect on frozen dough

Pickering emulsions with good freeze-thaw stability are essential in frozen food applications. This study developed a high freeze-thaw stabilized soy protein isolate (SPI)-maltose (M) Pickering emulsion and applied it to frozen doughs to investigate and reveal its impacts on the processing properties of the frozen dough. The results showed that after the freeze-thaw cycle, with a volume ratio of 1:2 of SPI to M, the appropriate amount of M changed the structure of SPI. This resulted in the Pickering emulsion prepared by the SPI exhibiting the least droplet coalescence and the best freeze-thaw stability. The results of dough rheological properties, textural properties, and binding capacity with water demonstrated that Pickering emulsions effectively inhibited the loss of gluten protein network structure in the dough after freeze treatment and increased the binding capacity of gluten proteins with starch and water in the dough. The best results were obtained with the incorporation of 3 % SPI-M high freeze-thaw stability, where the amount of bound water following three freeze-thaw cycles was 4.27 times higher than in doughs without Pickering emulsion. Overall, this study is significant for enhancing the freeze-thaw stability of Pickering emulsions stabilized by proteins and providing a new application route for Pickering emulsions.

Application of soy protein isolate-naringenin complexes as fat replacers in low-fat cream: Based on protein conformational changes, aggregation states and interfacial adsorption behavior

In this study, changes in the structural and functional properties of soybean protein isolate (SPI)-naringenin (NG) complexes under different amounts of naringenin treatments were explored, elucidating the effect of the complexes as fat replacers at the 15 % substitution level on the properties of low-fat cream. Finally, the correlation between the structure and function of the complex and the properties of low-fat cream was further analyzed. The addition of NG promotes the increase of SPI aggregation and particle size, and reduces the interfacial tension of the complex. Meanwhile, at the mass ratio of 48:3, NG and SPI formed a dendritic network structure suitable for stabilizing cream. The fat properties of cream indicate that low-fat creams stabilized by appropriate proportions of SPI-NG complexes displayed small and dense fat crystal network structures. In addition, low-fat cream stabilized by the SPI-NG complexes have improved whipping time, overrun, firmness, storage stability and rheological properties compared to natural SPI. It is worth noting that the overall quality of the cream stabilized by the SPI-NG complex with a mass ratio of 48:3 was almost close to that of full-fat cream. Therefore, this study promotes the potential applications of protein-polyphenol complexes as fat replacers in the food industry.

Influence of varying oil phase volume fractions on the characteristics of flaxseed-derived diglyceride-based Pickering emulsions stabilized by modified soy protein isolate

This research aimed to create Pickering emulsions using modified soy protein isolate (SPI) as a stabilizer and flaxseed-derived diglyceride (DAG) as an oil phase. The SPI was modified through a process involving both heating and ultrasound treatment. The result indicated that the droplet size of emulsions increased with the increase in oil content (p < 0.05). For instance, the largest droplet size (23 µm) was observed at an oil-to-SPI dispersion ratio of 4:1 ratio (φ = 80), whereas the smallest droplet size (6.39 µm) was noticed at the 1:4 ratio. During the 7-day storage period, the emulsions with a 4:1 ratio (φ = 80) showed the lowest droplet size increase (from 23 µm to 25.58 µm). In contrast, the emulsions with a 1:1 ratio displayed the highest increase (from 19.39 µm to 74.29 µm). Creaming index results revealed that emulsions with a 4:1 ratio (φ = 80) showed no signs of creaming and phase separation than all other treatments (p < 0.05). Backscattering fluctuations (ΔBS) and turbiscan stability index (TSI) showed that emulsions with 4:1, 2:1, and 1:1 oil-to-SPI dispersion ratios had consistent ΔBS curves with higher and TSI curves with lower values. Optical microscopy, confocal laser scanning, and cryo-scanning electron microscopy revealed that emulsions with oil-to-SPI dispersion ratios of 4:1 and 2:1 had well-organized structures with no visible coalescence. Macromorphological and microrheological investigations demonstrated that emulsions with 80% oil content had the highest viscosity, both moduli, elasticity index, macroscopic viscosity index, and the lowest fluidity index and solid-liquid balance values. Moreover, these emulsions were more resistant to centrifugation and storage environments. In conclusion, the study determined that flaxseed-derived DAG-based high internal phase Pickering emulsions (φ = 80) had superior stability, improved viscoelasticity, and better rheological properties.

Effect of Freezing on Soybean Protein Solution

To investigate the impact of frozen storage conditions on the physicochemical properties of soybean protein and explore the underlying mechanisms, this study focused on soybean isolate (SPI), ß-soybean companion globulin (7S), and soybean globulin (11S). The protein solutions were prepared at a concentration of 2% and subjected to freezing for 1 and 5 days. Subsequently, the protein content, physicochemical properties, secondary structure, sulfhydryl content, and chemical interaction forces were assessed and analyzed using UV spectrophotometry, Zeta potential measurements, SDS-PAGE, Fourier infrared spectroscopy, and endogenous fluorescence photoemission spectroscopy. The obtained results revealed that the solubility and total sulfhydryl content of SPI, 7S, and 11S exhibited a decreasing trend with prolonged freezing time. Among them, 11S demonstrated the largest decrease in solubility and total sulfhydryl content, followed by SPI, and 7S the least. During freezing, the aromatic amino acids of SPI, 7S, and 11S molecules were exposed, leading to increased hydrophobicity, protein aggregation, and particle size enlargement, and the structure of the protein changed from disordered structure to ordered structure. After freezing, the polarity of the microenvironment of SPI, 7S, and 11S increased, and their maximum fluorescence emission wavelengths were red-shifted. Notably, the largest red shift of SPI was from 332 nm to 335 nm. As freezing time increased, the contribution of hydrogen bonding increased, while the contribution of hydrophobic interactions decreased. This indicates that freezing affects the hydrophobic interactions, hydrogen bonding, and other chemical forces of the protein. The growth of ice crystals leads to the unfolding of protein molecular chains, exposure of internal hydrophobic groups, enhancement of hydrophobicity, and alters the secondary structure of the protein.

The preparation of Diacylglycerol-rich soybean oil by acetylated modification of arachin nanoparticles for W/O Pickering emulsion system

Pickering emulsion catalytic system (PEC) stabilized by nanoparticles is an efficient catalytic platform. Herein, a high-performance PEC was constructed by acetylated modification of arachin nanoparticles (AAPs). The results showed the pI of arachin was decreased from pH 5.5 to pH 3.5. The surface hydrophobicity index was significantly increased (from 56.28 ± 4.23 to 120.77 ± 0.79) after acetylated modification. The three-phase contact angle of AAPs was 91.20 ± 0.98°. AAPs were used as lipase immobilization carriers to increase the activity of free lipase fabricating lipase-AAPs. The immobilization efficiency and activity of lipase-AAPs were 12.95 ± 0.03% and 1.74 ± 0.07 U/mg, respectively. Enzymatic reaction kinetics showed that V_m of lipase-AAPs was twice of free lipase. K_m was 1/5 of free lipase. The catalytic efficiency of PEC to prepare DAG was 2.36 times of biphasic catalytic system (BCS). This work provided a promising way to promote the efficiency of DAG preparation.