Bovine Milk Fats and Their Replacers in Baked Goods: A Review

Lipidomics and Flavouromics assessment of the effects of enzyme modification on butter composition

Enzyme-modified butter (EMB) is well-known for its rich flavour, which is primarily defined by the process of enzymatic hydrolysis. This study employed lipidomics and flavouromics to assess the differences between EMBs and to uncover the intrinsic links between volatile organic compounds (VOCs) and lipids. Approximately 273 lipids and 82 VOCs were identified in butter. Palatase 20,000 L and Lipase MHA 10SD had the strongest hydrolytic activities, enhancing flavours characterised by the highest content of acids, followed by lactones and ketones. Combined with the variable importance in projection in partial least squares-discriminant analysis, 19 differential lipids and 41 key VOCs were identified. Further correlation analysis demonstrated that aldehydes were negatively correlated with unsaturated triglycerides, whereas ketones and lactones were negatively correlated with saturated triglycerides containing medium-chain saturated fatty acids. Interactions between lipids and VOCs offers theoretical insights that could inform the advancement of EMB technology.

Partition of milk phospholipids during ice cream manufacturing

The distribution of phospholipids (PL) within the fat and serum phase of ice cream manufacturing was evaluated through partition coefficients (KPL) after mixing, pasteurization, freezing, and hardening. Ice creams containing about 40.41 ± 3.45 (± standard deviation; control formulation) and 112.29 ± 9.06 (enriched PL formulation) mg of PL per g of fat were formulated with nonfat dry milk and β-serum, respectively. Overall, the KPL were lower than 1, indicating that the PL were predominantly found in the fat phase, and only a small amount was left in the serum and sediment. Confocal micrographs visually confirmed this generalization. The addition of PL significantly increased the viscosity of the mixes between 4- and 9-fold, depending on the shear rate. Additionally, mixes containing high PL exhibited higher yield stress than those formulated with low PL (0.15 ± 0.09 and 0.016 ± 0.08 Pa, respectively). Ice creams with high PL delayed the onset of meltdown and exhibited a slower rate of a meltdown than low-PL ice creams (18.53 ± 0.57 and 14.83 ± 0.85 min, and 1.01 ± 0.05 and 0.71 ± 0.04% min-1, respectively). This study provides useful guidelines for manufacturing ice cream enriched in milk PL. Additionally, the use of β-serum, a byproduct stream, as a source of PL is illustrated. The development will require studying the sensorial description of the product as well as consumer acceptance.

Fat reduced cookies using an olive oil-alginate gelled emulsion: sensory properties, storage stability and in vitro digestion

Reformulated cookies substituting 100 % butter by an olive oil-alginate gelled emulsion containing 40 % olive oil were elaborated with and without antioxidant, and their nutritional and sensory properties were assessed. Moreover, their performance during in vitro digestion as well as their oxidative stability during storage (21 days) were studied. Reformulated cookies showed a lower fat content (a decrease of 40 %), being this fraction mostly unsaturated (70 % lower saturated fat), in comparison with conventional cookies. Instrumental measures showed higher values for hardness with reformulation, which tends to equalize during storage. Reformulated cookies had good general sensory acceptability, although lower than control ones. Regarding oxidative stability, increases in malondialdehyde were observed in all formulations during storage, but not representing an oxidation problem (<1.5 nmol/g cookies). In vitro digestion assay promoted oxidation, but the use of antioxidants seemed to have a mitigating effect. Also, it seemed that the bioaccessibility of fatty acids after in vitro digestion was higher in the reformulated products (35-40 %) than in the control ones (10-25 %).

Influence of Partially Substituting Wheat Flour with Tiger Nut Flour on the Physical Properties, Sensory Quality, and Consumer Acceptance of Tea, Sugar, and Butter Bread

Tiger nut is a valuable source of fiber, lipids, minerals, and carbohydrates. However, avenues for incorporating tiger nuts into food remain underexplored, especially in several tropical countries where the plant grows well. The current study investigated the effects of partially substituting wheat flour (WF) with tiger nut flour (TNF) on the physical and sensory properties of different bread types to evaluate the more amenable system for tiger nut incorporation. The substitution was done at WF:TNF ratio of 100 : 0, 90 : 10, 85 : 15, 80 : 20, 75 : 25, and 70 : 30 for butter bread (B_b), tea bread (T_b), and sugar bread (S_b). The results show that WF substitution with TNF increased bread brownness and color saturation and decreased lightness, showing the highest impact on S_b, followed by T_b and B_b. Additionally, bread-specific volume decreased significantly after 20% (B_b), 25% (T_b), and 30% (S_b) TNF substitution. Furthermore, substituting WF with 30% TNF increased crumb hardness from approx. 1.87 N to 3.64 N (B_b), 3.46 N to 8.14 N (T_b), and 6.71 N to 11.39 N (S_b) and caused significant increases to 17.80 N (T_b) and 21.08 N (S_b) after 3 d storage. Only a marginal effect on storage hardness (4.32 N) was observed for B_b. Substituting WF with 10% TNF for B_b or 25% TNF for T_b led to significantly higher consumer (N = 56) scores for all attributes and overall acceptability. However, no significant effect on the overall acceptability of S_b was observed. Flash profiling showed frequently used descriptors for B_b as firm, moist, buttery, smooth, and astringent. After 10% TNF substitution, descriptors were chewy, firm, sweet, porous, dry, and caramel, and that of 30% TNF were grainy, chocolate, brown, nutty, and flaky. Substituting WF with TNF increased the lipids, fiber, and minerals content but decreased the protein and carbohydrate contents of bread. TNF substitution led to different physical and sensory effects depending on bread type, showing that B_b with 10% or T_b with 25% TNF is more comparable with the overall acceptance quality of 100% WF. The study is relevant for utilizing tiger nuts as an ingredient in bread products.

Evaluation of the nutritional quality of ultra-processed foods (ready to eat + fast food): Fatty acids, sugar, and sodium

The average American consumes more than 50% of their total dietary energy from ultra-processed foods (UPFs). From a nutritional standpoint, as UPFs intake increases, fiber, vitamin, and mineral intake decrease. High consumption of UPFs, mainly from fast foods (FF) and ready-to-eat (RTE) food items, emerges as a critical public health concern linking nutritional quality and food safety. In the present work, a systematic database of the fatty acid composition of the most consumed UPFs in the Midwest is reported. Saturated and monounsaturated fatty acids were predominant in RTE (42.5%) and FF (43.2%), respectively. In addition, the fatty acid profile in UPFs is reported according to six food categories: meat and poultry, eggs and derivatives, dairy products, seafood, baby foods, and others. Meat and poultry, and dairy products were the dominant food categories among UPFs. Meanwhile, polyunsaturated fatty acids were abundant in the eggs and seafood groups UPFs (61.8% and 46.4%, respectively) regardless of the food group. Furthermore, no significant differences were found in sugar content in UPFs. Caloric content was positively correlated with sodium (ρ = 0.748) and price (ρ = 0.534). The significance of this study relies on providing new quantitative data on the fat, sodium, and sugar contents of the most consumed UPFs in the Midwestern area of the United States. This information suggests paying more attention to these nutritional attributes, aiming to reduce their incorporation in UPF preparations. Additionally, more quantitative data are needed regarding other nutritional parameters such as protein and lipid degradation in UPFs. PRACTICAL APPLICATION: This study provides a profile of the fatty acid composition of the most consumed UPFs in the Midwestern region of the United States, as well as correlations with fat, sodium, and sugar contents in UPFs. The information offered a new perspective on the nutrition quality of UPFs, suggesting the reduction of the incorporation of these attributes in UPFs. Additionally, it will help define priority interventions for more advanced precision nutrition, especially for vulnerable populations, for example, children and older people. The overall decrease in added sugar and sodium and the service size in UPFs will significantly improve the nutritional quality of the Western diet.

Sources, purification, immobilization and industrial applications of microbial lipases: An overview

Microbial lipase is looking for better attention with the fast growth of enzyme proficiency and other benefits like easy, cost-effective, and reliable manufacturing. Immobilized enzymes can be used repetitively and are incapable to catalyze the reactions in the system continuously. Hydrophobic supports are utilized to immobilize enzymes when the ionic strength is low. This approach allows for the immobilization, purification, stability, and hyperactivation of lipases in a single step. The diffusion of the substrate is more advantageous on hydrophobic supports than on hydrophilic supports in the carrier. These approaches are critical to the immobilization performance of the enzyme. For enzyme immobilization, synthesis provides a higher pH value as well as greater heat stability. Using a mixture of immobilization methods, the binding force between enzymes and the support rises, reducing enzyme leakage. Lipase adsorption produces interfacial activation when it is immobilized on hydrophobic support. As a result, in the immobilization process, this procedure is primarily used for a variety of industrial applications. Microbial sources, immobilization techniques, and industrial applications in the fields of food, flavor, detergent, paper and pulp, pharmaceuticals, biodiesel, derivatives of esters and amino groups, agrochemicals, biosensor applications, cosmetics, perfumery, and bioremediation are all discussed in this review.

Changes in 3-, 2-Monochloropropandiol and Glycidyl Esters during a Conventional Baking System with Addition of Antioxidants

Shortening derived from palm oil is widely used in baking applications. However, palm oil and the related products are reported to contain high levels of monochloropropandiol (MCPD) ester and glycidyl ester (GE). MCPD and glycidol are known as process contaminants, which are carcinogenic and genotoxic compounds, respectively. The objective was to evaluate the effects of antioxidant addition in palm olein and stearin to the content of MCPD esters and GE in baked cake. Butylated hydroxyanisole (BHA), rosemary extract and tocopherol were used to fortify the samples at 200 mg/kg and in combinations (400, 600 and 800 mg/kg rosemary or tocopherol combined with 200 mg/kg BHA). The MCPD esters and GE content, radical formation and the quality of the fats portion were analyzed. The results showed that palm olein fortified with rosemary extract yielded less 2-MCPD ester. The GE content was lower when soft stearin was fortified with rosemary. ESR spectrometry measurements showed that the antioxidants were effective to reduce radical formation. The synergistic effects of combining antioxidants controlled the contaminants formation. In conclusion, oxidation stability was comparable either in the single or combined antioxidants. Tocopherol in combination with BHA was more effective in controlling the MCPD esters and GE formation.

Production of Milk Phospholipid-Enriched Dairy Ingredients

Milk phospholipids (MPLs) have been used as ingredients for food fortification, such as bakery products, yogurt, and infant formula, because of their technical and nutritional functionalities. Starting from either buttermilk or beta serum as the original source, this review assessed four typical extraction processes and estimated that the life-cycle carbon footprints (CFs) of MPLs were 87.40, 170.59, 159.07, and 101.05 kg CO₂/kg MPLs for membrane separation process, supercritical fluid extraction (SFE) by CO₂ and dimethyl ether (DME), SFE by DME, and organic solvent extraction, respectively. Regardless of the MPL content of the final products, membrane separation remains the most efficient way to concentrate MPLs, yielding an 11.1-20.0% dry matter purity. Both SFE and solvent extraction processes are effective at purifying MPLs to relatively higher purity (76.8-88.0% w/w).

Current Trends in the Realm of Baking: When Indulgent Consumers Demand Healthy Sustainable Foods

The term "baked goods" encompasses multiple food products made from flour (typically wheat flour) [...].