Thermal and Mineral Sensitivity of Oil-in-Water Emulsions Stabilised using Lentil Proteins

Formulation and Physical Stability of High Total Solids Lentil Protein-Stabilised Emulsions for Use in Plant Protein-Based Young Child Formulae

The demand for high-quality plant protein products is increasing and the aim of this work was to evaluate the impact of increasing the total solids content on the formation and stability of lentil protein stabilised oil-in-water emulsions. A series of emulsions were formulated using different proportions of total solids: 23, 26, 29, 32, and 35% (w/v). The emulsions were formulated using three ingredients-lentil protein, sunflower oil, and maltodextrin-which made up 15.85, 27.43, and 56.72% (w/w) of the total solids, respectively. The changes in apparent viscosity, particle size distribution, and colour during thermal processing were evaluated, with the physical stability investigated using an analytical centrifuge. The apparent viscosity of the solutions increased with total solids content (25.6 to 130 mPa.s^-1), as did redness colour intensity (a* value increased from 5.82 ± 0.12 to 7.70 ± 0.09). Thermal processing resulted in greater destabilisation for higher total solids samples, as evidenced by greater changes in particle size, along with decreased redness colour. These results bring a better understanding of high total solids plant protein emulsions and factors affecting their stability, which could be used for the development of cost-effective and sustainable processing solutions in the production of plant protein young child formulae.

Transformation of Seafood Side-Streams and Residuals into Valuable Products

Seafood processing creates enormous amounts of side-streams. This review deals with the use of seafood side-streams for transformation into valuable products and identifies suitable approaches for making use of it for different purposes. Starting at the stage of catching fish to its selling point, many of the fish parts, such as head, skin, tail, fillet cut-offs, and the viscera, are wasted. These parts are rich in proteins, enzymes, healthy fatty acids such as monounsaturated and polyunsaturated ones, gelatin, and collagen. The valuable biochemical composition makes it worth discussing paths through which seafood side-streams can be turned into valuable products. Drawbacks, as well as challenges of different aquacultures, demonstrate the importance of using the various side-streams to produce valuable compounds to improve economic performance efficiency and sustainability of aquaculture. In this review, conventional and novel utilization approaches, as well as a combination of both, have been identified, which will lead to the development of sustainable production chains and the emergence of new bio-based products in the future.

Physicochemical and nutritional properties of high protein emulsion-type lupin-based model milk alternatives: effect of protein source and homogenization pressure

BACKGROUND

Plant-based milk alternatives are becoming more popular. However, many are low in nutrients, particularly protein. More attention is being given to plant protein isolates / concentrates as potential ingredients in high-protein milk alternative formulations.

RESULTS

The effect of lupin protein source on the physicochemical, functional, and nutritional characteristics of model milk alternatives was investigated. Milk alternatives were produced with either blue lupin or white lupin protein isolate, formulated to contain similar levels of protein and fat as low-fat cow's milk. Nutritional composition and predicted glycemic properties were measured. The effect of homogenization pressure on the physicochemical properties and storage stability was also assessed, with cow's milk and soy milk alternative analyzed for comparison. Both blue and white lupin milk alternatives were high in protein, low in fermentable oligo-, di- and monosaccharides, and polyols (FODMAPs), and had a low predicted glycemic index. White lupin milk alternatives had smaller particle size as well as greater stability, with less creaming compared to blue lupin milk alternatives, although the former showed slightly higher sediment layers. Increasing homogenization pressure from 180 to 780 bar resulted in smaller particle size, lower separation rate, and greater foamability for both blue and white lupin milk alternatives. White lupin milk alternative homogenized at 780 bar was found to be the most stable product, with a similar separation rate to cow's milk.

CONCLUSIONS

These results indicate that protein source and processing can influence functional properties significantly along with product stability, and this is an important consideration when formulating high-protein milk alternatives. © 2021 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Formulation, pilot-scale preparation, physicochemical characterization and digestibility of a lentil protein-based model infant formula powder

BACKGROUND

Infant formula is a human milk substitute for consumption during the first months of life. The protein component of such products is generally of dairy origin. Alternative sources of protein, such as those of plant origin, are of interest due to dairy allergies, intolerances, and ethical and environmental considerations. Lentils have high levels of protein (20-30%) with a good amino acid profile and functional properties. In this study, a model lentil protein-based formula (LF), in powder format, was produced and compared to two commercial plant-based infant formulae (i.e., soy; SF and rice; RF) in terms of physicochemical properties and digestibility.

RESULTS

The macronutrient composition was similar between all the samples; however, RF and SF had larger volume-weighted mean particle diameters (D[4,3] of 121-134 μm) than LF (31.9 μm), which was confirmed using scanning electron and confocal laser microscopy. The larger particle sizes of the commercial powders were attributed to their agglomeration during the drying process. Regarding functional properties, the LF showed higher D[4,3] values (17.8 μm) after 18 h reconstitution in water, compared with the SF and RF (5.82 and 4.55 μm, respectively), which could be partially attributed to hydrophobic protein-protein interactions. Regarding viscosity at 95 °C and physical stability, LF was more stable than RF. The digestibility analysis showed LF to have similar values (P < 0.05) to the standard SF.

CONCLUSION

These results demonstrated that, from the nutritional and physicochemical perspectives, lentil proteins represent a good alternative to other sources of plant proteins (e.g., soy and rice) in infant nutritional products. © 2021 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Formation and thermal and colloidal stability of oil-in-water emulsions stabilized using quinoa and lentil protein blends

BACKGROUND

The amino acid composition, and rheological, thermal and colloidal stability of plant protein-based oil-in-water emulsion systems containing 1.90, 3.50 and 7.70 g 100 mL^-1 protein, fat and carbohydrate, respectively, using quinoa and lentil protein ratios of 100:0 and 60:40 were investigated. The emulsion containing lentil protein showed lower initial, peak and final viscosity values (22.7, 61.7 and 61.6 mPa s, respectively) than the emulsion formulated with quinoa protein alone (34.3, 102 and 80.0 mPa s, respectively) on heat treatment.

RESULTS

Particle size analysis showed that both samples had small particle sizes (~1.36 μm) after homogenization; however, the sample with 60:40 quinoa:lentil protein ratio showed greater physical stability, likely related to the superior emulsifying properties of lentil protein. However, upon heat treatment, large aggregates (~100 μm) were formed in both samples, reducing the physical stability of the samples. This physical stability was increased with the addition of 0.20% sodium dodecyl sulfate (SDS), whereas it was negatively affected by the addition of α-amylase. Addition of α-amylase led to lower viscosity for both emulsion samples, with measured values of 41.8 and 46.0 mPa s for the 100:0 and 60:40 samples, respectively. This suggests that the heat-induced increases in particle size were partially due to hydrophobic interactions between the proteins as SDS disrupts hydrophobic bonds between proteins.

CONCLUSION

These results demonstrated that using a mixture of lentil and quinoa proteins positively affected the physical stability of plant protein-based emulsions, in addition to contributing to a more nutritionally complete amino acid profile - both important considerations in the development of plant-based beverages. © 2021 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Fortification of Plant-Based Milk with Calcium May Reduce Vitamin D Bioaccessibility: An In Vitro Digestion Study

Many plant-based milks lack key micronutrients found in bovine milk, such as calcium and vitamin D. In this study, we fortified almond milk with these two micronutrients and used a standardized gastrointestinal model to examine the impact of product formulation on their bioaccessibility. The impact of different forms (CaCl₂ versus CaCO₃) and concentrations (0, 1, or 2 g per 240 mL) of calcium on the physicochemical properties, lipid digestibility, and vitamin D bioaccessibility was examined. Soluble calcium (CaCl₂) promoted particle aggregation by reducing the electrostatic repulsion, while colloidal calcium (CaCO₃) did not because there were fewer free calcium ions. High levels of calcium (soluble or insoluble) reduced vitamin D bioaccessibility, which was attributed to insoluble calcium soap formation in the small intestine. Calcium bioaccessibility was higher for CaCO₃ than CaCl₂. These findings are useful for the development of nutritionally fortified plant-based milks with improved physicochemical and nutritional properties.