Synthesis and Characterization of Acrylamide/Acrylic Acid Co-Polymers and Glutaraldehyde Crosslinked pH-Sensitive Hydrogels

Micro-Nanofiber Three-Dimensional Antibacterial Sponge with Wetting/Pore Dual Gradient for Rapid Liquid Infiltration and Uniform Retention in Diapers

The core layer of disposable diapers typically contains a blend of superabsorbent polymer (SAP) and pulp, resulting in slow liquid absorption, layer separation, reverse osmosis, and potential skin issues owing to the addition of antibacterial agents to the surface layer. Therefore, a core layer with rapid liquid absorption, uniform retention, and antibacterial properties must be developed to improve wearer comfort. In this study, a three-dimensional network porous structure for the core layer of a disposable diaper was prepared by solution blow spinning (SBS). This structure comprised a superabsorbent fiber (SAF) and hydrolyzed polyacrylonitrile (HPAN) micro/nanofibers with a dual gradient in wetting/pore size. Progressively increasing the SAF content in each layer to incrementally increase wettability and controlling fiber diameter, a gradient pore structure with sizes of approximately 30 μm-16 μm-7 μm was formed. This design exhibited rapid infiltration capability, reducing the third liquid infiltration time by 13 s compared to those of commercial core layers while reducing reverse osmosis by 1.4 g, and the liquid absorption and retention rates are 47.7 times and 46.1 times, respectively, which is 1.6 times higher than those of commercial diapers. In addition, incorporating a natural antibacterial agent, ε-poly-l-lysine hydrochloride (ε-PLH), into the core layer resulted in an antibacterial rate exceeding 99.99% without direct contact with the skin; water transport capacity tests confirmed faster liquid infiltration speed, uniform absorption, and no fault formation.

Thiol functionalized pH-responsive mucoadhesive hydrogel: Potential approach for site-specific delivery of 5 fluorouracil in colon cancer

The present study aims to develop a novel thiolated carboxymethyl cellulose (CMC-SH) by the addition of aldehyde groups via oxidation followed by reductive amination and then develop CMC-SH based pH-responsive hydrogel by free radical polymerization approach while assessing its mucoadhesive and permeation-enhancing capabilities. By in-vitro characterization, the intended compound's chemical composition, thermal stability, and amorphous nature were analyzed for CMC-SH polymer. Ellman's assay was utilized to estimate the thiol content and permeation analysis was performed to evaluate its enhanced permeability characteristics. The properties of developed CMC-SH based hydrogel were demonstrated by in-vitro analysis, structural, mechanical stability analysis, morphological evaluation and mucoadhesive properties. Rheological data showed that the viscous modulus and elastic modules of CMC-SH rose by 3.5 and 2.1 times, respectively. Compared to FU, the permeation showed a notable improvement of 4.89-fold with CMC-SH. According to an ex-vivo mucoadhesion analysis, CMC-SH based hydrogel was able to adhere to the intestinal mucosal layer for 210 min. The biocompatibility of CMC-SH and CMC-SH based hydrogel was demonstrated using Caco-2 cell lines. Thiolation of carboxymethyl cellulose significantly enhanced its mucoadhesive and permeation qualities, which makes the hydrogel desirable mucoadhesive and selective cytotoxic biomaterial for colorectal cancer therapy.

Cellulosic schiff base hydrogel biosensor for bacterial detection with pH/thermo-responsitivity: DFT calculations and molecular docking

A facile green hydrothermal method was developed for the preparation of fluorescent carbon dots (CDs) using sugarcane bagasse (SB) as a raw material. The incorporation of CDs within the hydroxyethyl cellulose-acrylamide hydrogel (HEC-AM) in the presence of glutardehyde (GA) as a crosslinking agent showed bright red emission under fluorescence microscope. The hydroxyethyl cellulose-N-CDs-acrylamide hydrogel (HEC-AM@N-CDs) were used as alternative biocompatible fluorescent probes for imaging and suppression of Gram-negative bacteria such as Escherichia coli (with inhibition zones 13 mm for HEC-AM to 17 mm for HEC-AM@N-CDs) & Helicobacter pylori (with inhibition zones 16 mm for HEC-AM to 13 mm for HEC-AM@N-CDs) and Gram-positive bacteria such as Micrococcus luteus (with inhibition zones 15 mm for HEC-AM to 16 mm for HEC-AM@N-CDs) & Staphylococcus aureus (with inhibition zones 13 mm for HEC-AM to 14 mm for HEC-AM@N-CDs). The N-CDs promote bacterial binding and internalization, leading to differential fluorescence emission depending on the bacteria's cell wall composition. DFT calculations support strong interactions between the bacteria and HEC-AM@N-CDs.

Amphiphilic pH-responsive core-shell nanoparticles can increase the performances of cellulose-based drug delivery systems

Polymer and nanoparticles (NPs) together are able to form nanocomposite materials that combine the beneficial properties of the traditional single systems. In this work, we propose a stimuli-responsive nanocomposite system which combines pH-responsive NPs with cellulose. Ring opening polymerization (ROP) followed by two reversible addition-fragmentation chain transfer (RAFT) polymerization steps were performed to synthetize ((PHEMA-graft-LA12)-co-PMAA)-b-PDEGMA copolymer characterized by tailored molecular weights and low polydispersity values. Uniform NPs were obtained by nanoprecipitation of the so-obtained copolymer in water. Moreover, drug release studies (using rhodamine b, fluorescein isothiocyanate, pyrene and 5-fluorouracil) at different pHs demonstrated the pH-responsivity of NPs, revealing a significant improvement of hydrophobic molecules release at acidic conditions. In vitro tests verified the biocompatibility of NPs and the efficacy in decreasing cancer cell viability. Finally, NPs were loaded into hydroxypropylmethyl-cellulose-C12 matrix to obtain the final polymer-NPs composite system. The composite systems showed the ability to sustain the release of low steric hindrance drugs loaded with NPs and high steric hindrance ones loaded within the polymeric network. Overall, the proposed pH-responsive drug delivery system represents a co-delivery device which could be applied for localized treatment in different combined therapeutic program.

An in-vitro study of active targeting & anti-cancer effect of folic acid conjugated chitosan encapsulated indole curcumin analogue nanoparticles

Natural compounds like Curcumin with anti-cancer, anti-inflammatory and anti-bacterial properties are good target for drug development but its poor aqueous solubility, bioavailability, and low retention properties makes it a poor drug candidate in clinical settings. Here in this study, we have used an indole curcumin analogue (ICA) that has better bioavailability and enhanced permeability and retention (EPR) effect than curcumin. To make an active targeting drug we have designed folic acid conjugated chitosan-based nanoparticles encapsulating Indole curcumin analogue (CS-FA-ICA-np). The physical characteristics of CS-FA-ICA-np were evaluated by DLS, SEM, FTIR, XPS, XRD and TGA. Anti-cancer activity was analyzed using MTT, Fluorescence staining, Flow cytometry, comet assay, DNA fragmentation assay, wound healing, gelatin zymography, chick chorioallantoic membrane (CAM) assay and hemolysis assay. The size of CS-FA-ICA-nps were found to be 111 nm, and spherical in shape as observed in SEM. In-vitro assays show that CS-FA-ICA np has IC50 of 90 μg/mL in MDA-MB-231, increases ROS concentration, arrests cell cycle in G2-M phase, reduces matrix metalloproteinase-9 (MMP-9) activity and initiates apoptosis in cancer cells. Our results indicate that encapsulation of ICA increases its anti-cancer effect, drug stability, enhanced drug delivery to cancer microenvironment.

Formulation and Evaluation of Turmeric- and Neem-Based Topical Nanoemulgel against Microbial Infection

The combination of nanoemulgel and phytochemistry has resulted in several recent discoveries in the field of topical delivery systems. The present study aimed to prepare nanoemulgel based on turmeric (Curcuma longa) and neem (Azadirachta indica) against microbial infection as topical drug delivery. Olive oil (oil phase), Tween 80 (surfactant), and PEG600 (co-surfactant) were used for the preparation of nanoemulsion. Carbopol 934 was used as a gelling agent to convert the nanoemulsion to nanoemulgel and promote the control of the release of biological properties of turmeric and neem. The nanoemulsion was characterized based on particle size distribution, PDI values, and compatibility using FTIR analysis. In contrast, the nanoemulgel was evaluated based on pH, viscosity, spreadability, plant extract and excipient compatibility or physical state, in vitro study, ex vivo mucoadhesive study, antimicrobial properties, and stability. The resulting nanoemulsion was homogeneous and stable during the centrifugation process, with the smallest droplets and low PDI values. FTIR analysis also confirmed good compatibility and absence of phase separation between the oil substance, surfactant, and co-surfactant with both plant extracts. The improved nanoemulgel also demonstrated a smooth texture, good consistency, good pH, desired viscosity, ex vivo mucoadhesive strength with the highest spreadability, and 18 h in vitro drug release. Additionally, it exhibited better antimicrobial properties against different microbial strains. Stability studies also revealed that the product had good rheological properties and physicochemical state for a period of over 3 months. The present study affirmed that turmeric- and neem-based nanoemulgel is a promising alternative for microbial infection particularly associated with microorganisms via topical application.

Enhanced mechanical properties and biocompatibility of bacterial cellulose composite films with inclusion of 2D MoS2 and helical carbon nanotubes for use as antimicrobial drug carriers

Bacterial cellulose (BC) is a biomaterial being investigated for a range of applications. Herein, BC films derived from nata de coco pieces are reinforced by two-dimensional molybdenum disulfide (MoS2) and helical carbon nanotubes (HCNTs) to enhance their tensile mechanical properties, and the biocompatibility of the BC composite films is demonstrated. A simple preparation is presented using a kitchen blender to disperse and blend the BC fibers and additives in a common fabrication medium, followed by vacuum filtration. The mechanical properties of the BC/MoS2/HCNTs composite films are enhanced due to the synergistic effect of MoS2 and HCNTs embedded in the BC films. The MoS2/HCNTs binary additive (1 phr) is capable of increasing the strength and Young's modulus by 148 % and 333 %, respectively, relative to the BC films. The cell cytotoxicity of the BC/MoS2/HCNTs films was assessed using an MTT assay. The composite films are biocompatible with a cell viability of L929 fibroblast cells >70 %, coupled with observations of direct cell attachment on the films. The composite films also exhibited good performance in absorbing and releasing gentamicin antibiotics to inhibit the growth of Escherichia coli and Staphylococcus aureus. The BC/MoS2/HCNTs films are thus potential BC-based candidates as biocompatible robust antibiotic carriers.

5-Fluorouracil-Encapsulated Films Using Exopolysaccharides from a Thermophilic Bacterium Geobacillus sp. WSUCF1 for Topical Drug Delivery

Bacteria are capable of producing a specific type of biopolymer, termed exopolysaccharides (EPSs). EPSs from thermophile Geobacillus sp. strain WSUCF1 specifically can be assembled using cost-effective lignocellulosic biomass as the primary carbon substrate in lieu of traditional sugars. 5-fluorouracil (5-FU) is an FDA-approved, versatile chemotherapeutic that has yielded high efficacy against colon, rectum, and breast cancers. The present study investigates the feasibility of a 5% 5-fluorouracil film using thermophilic exopolysaccharides as the foundation in conjunction with a simple self-forming method. The drug-loaded film formulation was seen to be highly effective against A375 human malignant melanoma at its current concentration with viability of A375 dropping to 12% after six hours of treatment. A drug release profile revealed a slight burst release before it settled into an extended and maintained release of 5-FU. These initial findings provide evidence for the versatility of thermophilic exopolysaccharides produced from lignocellulosic biomass to act as a chemotherapeutic-delivering device and expand the overall applications of extremophilic EPSs.

Ellagic Acid Inclusion Complex-Loaded Hydrogels as an Efficient Controlled Release System: Design, Fabrication and In Vitro Evaluation

Oxidants play a crucial role in the development of oxidative stress, which is linked to disease progression. Ellagic acid is an effective antioxidant with applications in the treatment and prevention of several diseases, since it neutralizes free radicals and reduces oxidative stress. However, it has limited application due to its poor solubility and oral bioavailability. Since ellagic acid is hydrophobic, it is difficult to load it directly into hydrogels for controlled release applications. Therefore, the purpose of this study was to first prepare inclusion complexes of ellagic acid (EA) with hydroxypropyl-β-cyclodextrin and then load them into carbopol-934-grafted-2-acrylamido-2-methyl-1-propane sulfonic acid (CP-g-AMPS) hydrogels for orally controlled drug delivery. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) were used to validate ellagic acid inclusion complexes and hydrogels. There was slightly higher swelling and drug release at pH 1.2 (42.20% and 92.13%) than at pH 7.4 (31.61% and 77.28%), respectively. Hydrogels had high porosity (88.90%) and biodegradation (9.2% per week in phosphate-buffered saline). Hydrogels were tested for their antioxidant properties in vitro against 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS). Additionally, the antibacterial activity of hydrogels was demonstrated against Gram-positive bacterial strains (Staphylococcus aureus and Escherichia coli) and Gram-negative bacterial strains (Pseudomonas aeruginosa).

Multifunctional Oxidized Succinoglycan/Poly(N-isopropylacrylamide-co-acrylamide) Hydrogels for Drug Delivery

We prepared the self-healing and temperature/pH-responsive hydrogels using oxidized succinoglycan (OSG) and a poly (N-isopropyl acrylamide-co-acrylamide) [P(NIPAM-AM)] copolymer. OSG was synthesized by periodate oxidation of succinoglycan (SG) isolated directly from soil microorganisms, Sinorhizobium meliloti Rm1021. The OSG/P(NIPAM-AM) hydrogels were obtained by introducing OSG into P(NIPAM-AM) networks. The chemical structure and physical properties of these hydrogels were characterized by ATR-FTIR, XRD, TGA, and FE-SEM. The OSG/P(NIPAM-AM) hydrogels showed improved elasticity, increased thermal stability, new self-healing ability, and 4-fold enhanced tensile strength compared with the P(NIPAM-AM) hydrogels. Furthermore, the 5-FU-loaded OSG/P(NIPAM-AM) hydrogels exhibited effective temperature/pH-responsive drug release. Cytotoxicity experiments showed that the OSG/P(NIPAM-AM) hydrogels were non-toxic, suggesting that OSG/P(NIPAM-AM) hydrogels could have the potential for biomedical applications, such as stimuli-responsive drug delivery systems, wound healing, smart scaffolds, and tissue engineering.

Sodium Alginate-g-acrylamide/acrylic Acid Hydrogels Obtained by Electron Beam Irradiation for Soil Conditioning

Being both a cause and a victim of water scarcity and nutrient deficiency, agriculture as a sustainable livelihood is dependent now on finding new suport solutions. Biodegradable hydrogels usage as soil conditioners may be one of the most effective solutions for irrigation efficiency improvement, reducing the quantity of soluble fertilizers per crop cycle and combating pathogens, due to their versatility assured by both obtaining method and properties. The first goal of the work was the obtaining by electron beam irradiation and characterization of some Sodium Alginate-g-acrylamide/acrylic Acid hydrogels, the second one being the investigation of their potential use as a soil conditioner by successive experiments of absorption and release of two different aqueous nutrient solutions. Alginate-g-acrylamide/acrylic Acid hydrogels were obtained by electron beam irradiation using the linear accelerator ALID 7 at 5.5 MeV at the irradiation doses of 5 and 6 kGy. For this were prepared monomeric solutions that contained 1 and 2% sodium alginate, acrylamide and acrylic acid in ratios of 1:1 and 1.5:1, respectively, for the obtaining of materials with hybrid properties derived from natural and synthetic components. Physical, chemical, structural and morphological characteristics of the obtained hydrogels were investigated by specific analysis using swelling, diffusion and network studies and Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy. Four successive absorption and release experiments of some synthetic and natural aqueous solutions with nutrients were performed.

Fueling DNA Self-Assembly via Gel-Released Regulators

The development of responsive, multicomponent molecular materials requires means to physically separate yet easily couple distinct processes. Here we demonstrate methods to use molecules and reactions loaded into microliter-sized polyacrylamide hydrogels (mini-gels) to control the dynamic self-assembly of DNA nanotubes. We first characterize the UV-mediated release of DNA molecules from mini-gels, changing diffusion rates and minimizing spontaneous leakage of DNA. We then demonstrate that mini-gels can be used as compartments for storage and release of DNA that mediates the assembly or disassembly of DNA nanotubes in a one-pot process and that the speed of DNA release is controlled by the mini-gel porosity. With this approach, we achieve control of assembly and disassembly of nanotubes with distinct kinetics, including a finite delay that is obtained by loading distinct DNA regulators into distinct mini-gels. We finally show that mini-gels can also host and localize enzymatic reactions, by transcribing RNA regulators from synthetic genes loaded in the mini-gels, with diffusion of RNA to the aqueous phase resulting in the activation of self-assembly. Our experimental data are recapitulated by a mathematical model that describes the diffusion of DNA molecules from the gel phase to the aqueous phase in which they control self-assembly of nanotubes. Looking forward, DNA-loaded mini-gels may be further miniaturized and patterned to build more sophisticated storage compartments for use within multicomponent, complex biomolecular materials relevant for biomedical applications and artificial life.

Synthesis and Characterization of Chitosan-Decorated Nanoemulsion Gel of 5-Fluorouracil for Topical Delivery

(1) Background: The present study aimed to prepare chitosan-coated nanoemulsion gel containing 5-fluorouracil for enhanced topical delivery. (2) Methods: To formulate the nanoemulsion gel, oleic acid was used as the oil phase and Carbopol 940 as a gelling agent. Chitosan was used as a coating agent to control the release of 5-FU. Drug−excipient compatibility was evaluated using ATR-FTIR. The prepared nanoemulsion formulations were characterized based on particle size distribution, zeta potential, % encapsulation efficiency and drug content. In vitro drug release, skin drug retention and ex vivo permeation profiles were performed across rat skin using a Franz diffusion cell. Skin irritation experiments were also conducted on rats to examine the irritation potential of the formulations. (3) Results: It was found that the drug and excipients were compatible and chitosan successfully coated 5-FU, as demonstrated by ATR-FTIR results. The introduction of chitosan increased the size and zeta potential of the nanoemulsion. The 5-FU release in vitro was significantly lowered in the case of chitosan-decorated nanoemulsion (5-FU-C-NE), whereas the permeation and skin drug retention were higher in the case of 5-FU-C-NE. The formulations were proven non-irritant to the skin of the rats. The optimized formulation of the nanoemulsion was introduced into 1% Carbopol 940 gel. Incorporating the nanoemulsion into the gel further reduced the drug release in vitro and ex vivo permeation, whereas the retention of the drug in the skin was significantly increased (ANOVA; p < 0.05). The increase in skin retention was due to the presence of chitosan and Carbopol 940. The in vitro and ex vivo results were also confirmed with in vivo studies. Incorporating nanoemulsion into gel has resulted in higher Tmax, longer half-life and greater skin drug retention. (4) Conclusion: The results suggest that chitosan-decorated nanoemulsion gel is safe and can potentially be used to promote 5-FU skin retention, which is ideal for skin diseases such as melanoma.

5-Fluorouracil-Loaded Folic-Acid-Fabricated Chitosan Nanoparticles for Site-Targeted Drug Delivery Cargo

Nanoparticles play a vital role in cancer treatment to deliver or direct the drug to the malignant cell, avoiding the attacking of normal cells. The aim of the study is to formulate folic-acid-modified chitosan nanoparticles for colon cancer. Chitosan was successfully conjugated with folic acid to produce a folic acid-chitosan conjugate. The folate-modified chitosan was loaded with 5-FU using the ionic gelation method. The prepared nanoparticles were characterized for size, zeta potential, surface morphology, drug contents, entrapment efficiency, loading efficiency, and in vitro release study. The cytotoxicity study of the formulated nanoparticles was also investigated. The conjugation of folic acid with chitosan was confirmed by FTIR and NMR spectroscopy. The obtained nanoparticles were monodispersed nanoparticles with a suitable average size and a positive surface charge. The size and zeta potential and PDI of the CS-5FU-NPs were 208 ± 15, 26 ± 2, and +20 ± 2, respectively, and those of the FA-CS-5FU-NPs were 235 ± 12 and +20 ± 2, respectively, which are in the acceptable ranges. The drug contents' % yield and the %EE of folate-decorated NPs were 53 ± 1.8% and 59 ± 2%, respectively. The in vitro release of the FA-CS-5FU-NPs and CS-5FU-NPs was in the range of 10.08 ± 0.45 to 96.57 ± 0.09% and 6 ± 0.31 to 91.44 ± 0.21, respectively. The cytotoxicity of the nanoparticles was enhanced in the presence of folic acid. The presence of folic acid in nanoparticles shows much higher cytotoxicity as compared to simple chitosan nanoparticles. The folate-modified nanoparticles provide a potential way to enhance the targeting of tumor cells.

Multi-Responsive Optimization of Novel pH-Sensitive Hydrogel Beads Based on Basil Seed Mucilage, Alginate, and Magnetic Particles

Conventional drug delivery systems often cause side effects and gastric degradation. Novel drug delivery systems must be developed to decrease side effects and increase the efficacy of drug delivery. This research aimed to fabricate hydrogel beads for use as a drug delivery system based on basil seed mucilage (BSM), sodium alginate (SA), and magnetic particles (MPs). The Taguchi method and Grey relational analysis were used for the design and optimization of the hydrogel beads. Three factors, including BSM, SA, and MPs at four levels were designed by L-16 orthogonal arrays. BSM was the main factor influencing bead swelling, drug release rate at pH 7.4, and release of antioxidants at pH 1.2 and 7.4. In addition, SA and MPs mainly affected drug loading and drug release rate in acidic medium, respectively. Grey relational analysis indicated that the composition providing optimal overall properties was 0.2 vol% BSM, 0.8 vol% SA, and 2.25 vol% MPs. Based on the findings of this work, BSM/SA/MPs hydrogel beads have the potential to be used as a pH-sensitive alternative material for drug delivery in colon-specific systems.

Thiolated Chitosan Microneedle Patch of Levosulpiride from Fabrication, Characterization to Bioavailability Enhancement Approach

In this study, a first attempt has been made to deliver levosulpiride transdermally through a thiolated chitosan microneedle patch (TC-MNP). Levosulpiride is slowly and weakly absorbed from the gastrointestinal tract with an oral bioavailability of less than 25% and short half-life of about 6 h. In order to enhance its bioavailability, levosulpiride-loaded thiolated chitosan microneedle patches (LS-TC-MNPs) were fabricated. Firstly, thiolated chitosan was synthesized and characterized by nuclear magnetic resonance (1HNMR) spectroscopy, attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, differential scanning calorimetry (DSC), and X-ray diffraction (XRD). Thiolated chitosan has been used in different drug delivery systems; herein, thiolated chitosan has been used for the transdermal delivery of LS. LS-TC-MNPs were fabricated from different concentrations of thiolated chitosan solution. Furthermore, the levosulpiride-loaded thiolated chitosan microneedle patch (LS-TC-MNP) was characterized by FTIR spectroscopic analysis, scanning electron microscopy (SEM) study, penetration ability, tensile strength, moisture content, patch thickness, and elongation test. LS-TC-MNP fabricated with 3% thiolated chitosan solution was found to have the best tensile strength, moisture content, patch thickness, elongation, drug-loading efficiency, and drug content. Thiolated chitosan is biodegradable, nontoxic and has good absorption and swelling in the skin. LS-TC-MNP-3 consists of 100 needles in 10 rows each with 10 needles. The length of each microneedle was 575 μm; they were pyramidal in shape, with sharp pointed ends and a base diameter of 200 µm. The microneedle patch (LS-TC-MNP-3) resulted in-vitro drug release of 65% up to 48 h, ex vivo permeation of 63.6%, with good skin biocompatibility and enhanced in-vivo pharmacokinetics (AUC = 986 µg/mL·h, Cmax = 24.5 µg/mL) as compared to oral LS dispersion (AUC = 3.2 µg/mL·h, Cmax = 0.5 µg/mL). Based on the above results, LS-TC-MNP-3 seems to be a promising strategy for enhancing the bioavailability of levosulpiride.