The Influence of Edible Oils' Composition on the Properties of Beeswax-Based Oleogels

Binary wax oleogels: Improving physical properties and oxidation stability through substitution of carnauba wax with beeswax

High concentrations of carnauba waxes (CRWs) that can compromise organoleptic properties are required to create self-sustained and functional oleogels. The weak physical properties and stability of 4% w/w CRW-rice bran oil (RBO) oleogel were addressed by substituting CRW with beeswax (BW) in different weight ratios. The texture profile analyzer revealed that substituting only 10% (weight ratio) of CRW with BW improved the hardness compared to the mono-CRW oleogel. The hardness of binary oleogels increased gradually as the proportion of BW increased. At a BW ratio of 70% or more, the hardness was three times higher than that of mono-BW oleogel. Rheology analysis showed the same trend as the large deformation test; however, the hardest binary oleogels had lower critical strain and yield point compared to the mono-wax oleogels, implying that they are more prone to lose their structure upon applied stress. Nevertheless, nearly all binary mixtures (except for 10%BW90%CRW) showed oil-binding capacities above 99%, suggesting improved nucleation and crystallization process. Polarized light microscopy showed the coexistence of BW and CRW crystals and changes in the size and arrangement of wax crystals upon proportional changes of the two waxes. X-ray diffraction confirmed no differences in the peaks' location, and all oleogels had β' polymorphism. Differential scanning calorimetry showed eutectic melting behavior in some binary blends. Oxidation stability in the binary wax oleogels improved as compared to the mono-wax oleogel and bulk RBO. BW and CRW mixtures have promising oil-structuring abilities and have various properties at different ratios that have the potential to be used as solid fat substitutes. PRACTICAL APPLICATION: As a trending green oil-structuring technology, oleogelation has shown great potential to reduce saturated fats in food systems. The current research provides valuable fundamental information on the strong synergistic interactions between beeswax and carnauba wax that have the potential to be used as solid fat substitutes created with a much lower total concentration of the required wax. This will help create wax oleogels with better organoleptic properties and less negative waxy mouthfeel. Such knowledge could prove beneficial for the development of healthy products that have potential applications in meat, bakery, dairy, pharmaceutical, as well as cosmetic industries.

Effects of hydrocolloids and oleogel on techno-functional properties of dairy foods

This paper aims to overview the influence of different gels that including hydrocolloids and oleogel on techno-functional changes of dairy foods. The hydrocolloids are widely added to dairy products as stabilizers, emulsifiers, and gelling agents to enhance their texture, or improve sensory properties to meet consumer needs; and the newly developed oleogel, which despite less discussed in dairy foods, this article lists its application in different dairy products. The properties of different hydrocolloids were explained in detail, meanwhile, some common hydrocolloids such as pectin, sodium alginate, carrageenan along with the interaction between gel and proteins on techno-functional properties of dairy products were mainly discussed. What's more, the composition of oleogel and its influence on dairy foods were briefly summarized. The key issues have been revealed that the use of both hydrocolloids and oleogel has great potential to be the future trend to improve the quality of dairy foods effectively.

A Comparative Study between Beeswax and Glycerol Monostearate for Food-Grade Oleogels

With the aim to produce solid fats with a high percentage of unsaturated fatty acids, oleogels based on olive and peanut oil with different concentrations of beeswax (BW) and glycerol monostearate (GMS) as oleogelators were studied and compared. The critical oleogelator concentration for both BW and GMS was 3%. Thermal properties of the developed GMS-based oleogels pointed to a polymorphic structure, confirmed by the presence of two exothermic and endothermic peaks. All developed oleogels released less than 4% of oil, highlighting their high oil binding capacity. A morphology evaluation of oleogels showed platelet-like crystals, characterized by a cross-sectional length of 50 μm in BW-based oleogels and irregular clusters of needle-like crystals with a higher diameter in GMS-based oleogels. BW-based oleogels showed a solid fat content ranging from 1.16% to 2.27%, and no solid fat content was found at 37 °C. GMS-based oleogels reached slightly higher values of SFC that ranged from 1.58% to 2.97% at 25 °C and from 1.00% to 1.75% at 37 °C. Olive oil-based oleogels with GMS showed higher firmness compared with BW-based ones. The stronger structure network in olive oil/GMS-based oleogels provided a real physical barrier to oxidants, showing a high oxidation stability.

Microstructure, Physical Properties, and Oxidative Stability of Olive Oil Oleogels Composed of Sunflower Wax and Monoglycerides

The utilization of natural waxes to form oleogels has emerged as a new and efficient technique for structuring liquid edible oil into solid-like structures for diverse food applications. The objective of this study was to investigate the interaction between sunflower wax (SW) and monoglycerides (MGs) in olive oil oleogels and assess their physical characteristics and storage stability. To achieve this, pure SW and a combination of SW with MGs in a 1:1 ratio were examined within a total concentration range of 6-12% w/w. The formed oleogels were characterized based on their microstructure, melting and crystallization properties, textural characteristics, and oxidative stability during storage. All the oleogels were self-standing, and, as the concentration increased, the hardness of the oleogels also increased. The crystals of SW oleogels were long needle-like, while the combination of SW and MGs led to the formation of crystal aggregates and rosette-like crystals. Differential scanning calorimetry and FTIR showed that the addition of MGs led to different crystal structures. The oxidation results revealed that oleogels had low peroxide and TBARS values throughout the 28-day storage period. These results provide useful insights about the utilization of SW and MGs oleogels for potential applications in the food industry.

Characterization of Beeswax and Rice Bran Wax Oleogels Based on Different Types of Vegetable Oils and Their Impact on Wheat Flour Dough Technological Behavior during Bun Making

Five varieties of vegetable oil underwent oleogelation with two types of wax as follows: beeswax (BW) and rice bran wax (RW). The oleogels were analyzed for their physicochemical, thermal, and textural characteristics. The oleogels were used in the bun dough recipe at a percentage level of 5%, and the textural and rheological properties of the oleogel doughs were analyzed using dynamic and empirical rheology devices such as the Haake rheometer, the Rheofermentometer, and Mixolab. The thermal properties of beeswax oleogels showed a melting peak at a lower temperature for all the oils used compared with that of the oleogels containing rice bran wax. Texturally, for both waxes, as the percentage of wax increased, the firmness of the oleogels increased proportionally, which indicates better technological characteristics for the food industry. The effect of the addition of oleogels on the viscoelastic properties of the dough was measured as a function of temperature. All dough samples showed higher values for G' (storage modulus) than those of G″ (loss modulus) in the temperature range of 20-90 °C, suggesting a solid, elastic-like behavior of all dough samples with the addition of oleogels. The influence of the beeswax and rice bran oleogels based on different types of vegetable oils on the thermo-mechanical properties of wheat flour dough indicated that the addition of oleogels in dough recipes generally led to higher dough stability and lower values for the dough development time and those related to the dough's starch characteristics. Therefore, the addition of oleogels in dough recipes inhibits the starch gelatinization process and increases the shelf life of bakery products.

Impact of binary mixtures of natural waxes in mechanical properties and microstructure of oleogels

BACKGROUND

Solid fats are critical to obtaining a wide range of food texture and quality characteristics, but their consumption is strongly associated with higher cardiovascular disease risks. Structuring unsaturated oils with natural waxes into oleogels (OG) is an innovative solution to develop fat mimics with a healthier profile.

RESULTS

Soy wax (SW), beeswax (BW) and carnauba wax (CW), have been used in binary mixtures of waxes, aiming to understand their interactions and influence on OG quality properties and microstructural characteristics. In the present study, OGs were produced using binary wax mixtures and analyzed for texture, color, smoke point, microstructure, Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). Wax combinations led to antagonistic (mixtures with SW) and synergistic interactions (BW/CW) based on their mechanical properties. At the microstructural level BW/CW blends showed a reduction in crystal size and with a more compact structure. XRD and FTIR spectra revealed a packing of orthorhombic perpendicular subcell for most OGs, whereas SW produced samples with an arrangement with β´ crystals, characteristic of edible solid fats. Additionally, when compared to commercial beef fat, BW/CW mixtures showed similar quality attributes indicating that they could act as fat mimic.

CONCLUSION

The combined analysis of microstructure, spectroscopic and mechanical properties enhanced the understanding of how the nature of the interactions between waxes and lipid phases impact in the final quality of the structured oils. The study's insights indicate that binary wax combinations can efficiently replace solid fats, offering healthier alternatives at the same time as preserving desired sensory characteristics. © 2024 Society of Chemical Industry.

Novel bigels based on walnut oil oleogel and chitosan hydrogel: Preparation, characterization, and application as food spread

This study developed new biphasic gel systems containing a walnut oil-based oleogel and a chitosan hydrogel and evaluated the application on food spread. The effects of different oleogelators [γ-oryzanol/β-sitosterol (γ-ORY/β-SIT), candelilla wax/span 65 (CW/SA), and mono- and diglycerides of fatty acids] were explored. Rheological analysis showed that γ-ORY/β-SIT-based bigel had the strongest gel strength, but XRD confirmed that β' crystal form (d = 3.72 Å, 4.12 Å) was predominantly in the CW/SA-based bigel, which was more appropriate for application as spread. The characteristics of CW/SA-based bigel with different oleogel fractions (40-80 wt%) were investigated. The microscopic images indicated that the hydrogels were dispersed as small droplets in the oleogels after oleogel fraction reaching 60 %. The highest crystallinity was achieved when the oleogel fraction was 60 %, and its oil binding capacity was 96.49 %. Textural analysis showed that the CW/SA-based bigel (OG-60 %) had similar properties with commercial spread B, and can be used as a partial replacement for spread B. Replacing 75 % of the commercial spread B with the bigel was found to be optimal and displayed acceptable sensory features. This study developed a healthy bigel based on walnut oil and provided the in-depth information for bigels as an alternative to plastic fats.

New Insight into Food-Grade Emulsions: Candelilla Wax-Based Oleogels as an Internal Phase of Novel Vegan Creams

Cream-type emulsions containing candelilla wax-based oleogels (EC) were analyzed for their physicochemical properties compared to palm oil-based creams (EP). The microstructure, rheological behavior, stability, and color of the creams were determined by means of non-invasive and invasive techniques. All the formulations exhibited similar color parameters in CIEL*a*b* space, unimodal-like size distribution of lipid particles, and shear-thinning properties. Oleogel-based formulations were characterized by higher viscosity (consistency index: 172-305 mPa·s, macroscopic viscosity index: 2.19-3.08 × 10-5 nm-2) and elasticity (elasticity index: 1.09-1.45 × 10-3 nm-2), as well as greater resistance to centrifugal force compared to EP. Creams with 3, 4, or 5% wax (EC3-5) showed the lowest polydispersity indexes (PDI: 0.80-0.85) 24 h after production and the lowest instability indexes after environmental temperature changes (heating at 90 °C, or freeze-thaw cycle). EC5 had particularly high microstructural stability. In turn, candelilla wax content ≥ 6% w/w accelerated the destabilization processes of the cream-type emulsions due to disintegration of the interfacial layer by larger lipid crystals. It was found that candelilla wax-based lipids had great potential for use as palm oil substitutes in the development of novel vegan cream analogues.

Natural oleogelators for the formulation of oleogels by considering their rheological and textural perspective; a review

A well-known method for reducing or swapping out undesirable and controversial fats in food is oleogelation. To quantify the effects of droplets-particle inclusion on the textural aspects of gelled systems, a thorough understanding of rheological behavior of oleogels (OGs) is necessary. Otherwise stated, a rational grasp of rheological characterization is essential for food development, optimization, and processing (when touching or putting food into the mouth, rheological flow qualities influence our perception). This narrative review primarily intends to investigate rheological and textural characteristics of various oleogelator-based OGs, such as operative connection between hardness, distortion, stresses, and rheological parameters like viscosity, elasticity, and viscoelasticity, as well as flow behavior and recovery. Expanding oleogelators concentration and synergistic interactions between them increase robustness and moduli values, as compared to single oleogelators. However, given the lack of information on the connection between the OGs' macroscopic rheological characteristics and their microstructural characteristics, this review presents state-of-the-art overview of various oleogelator-based OGs, highlighting the importance of structure-rheology relationships of OGs to provide advanced knowledge on the development of innovative OGs.

Potential application of bee products in food industry: An exploratory review

Over the past eight years, bee products such as wax, honey, propolis, and pollen have generated intense curiosity about their potential food uses; to explore these possibilities, this review examines the nutritional benefits and notable characteristics of each product related to the food industry. While all offer distinct advantages, there are challenges to overcome, including the risk of honey contamination. Indeed, honey has excellent potential as a healthier alternative to sugar, while propolis's remarkable antibacterial and antioxidant properties can be enhanced through microencapsulation. Pollen is a versatile food with multiple applications in various products. In addition, the addition of beeswax to oleogels and its use as a coating demonstrate significant improvements in the quality and preservation of environmentally sustainable foods over time. This study demonstrates that bee products and apitherapy are essential for sustainable future food and innovative medical treatments.

Effects of different oleogelators on the structural properties and composition of iron walnut-oil oleogels

In this study, we compared the quality of iron walnut oil (IWO) oleogels prepared with different oleogelators, including γ-oryzanol/β-sitosterol (OZ-PS), γ-oryzanol/triglyceride (OZ-TC), monoglycerides (MGS), beeswax (BW), beeswax-monoglycerides (BW-MGS), and carnauba wax (CW). The physicochemical and component properties, rheological and textural parameters, macroscopic morphologies, and antioxidant capacities of the resulting oleogels were analyzed. In addition, their microscopic properties were analyzed using Fourier-transform infrared (FTIR), X-ray powder diffraction (XRD) spectroscopy, and polarized light microscopy (PLM). The results showed that the gel structures produced by different oleogelators did not change the fatty acid composition of IWO. In addition, the IWO oleogel prepared with OZ-PS had a more stable network structure, excellent hardness at 4℃ (1116.51 g), better antioxidant capacity (766.50 μmol TE/kg) and higher total phenolic content (14.98 mg/kg) than any other experimental IWO oleogels. Moreover, comprehensive ranking by principal component analysis of numerous characteristics showed that the OZ-PS oleogel (2.533) ranked first among the six oleogels studied. Therefore, the IWO oleogel prepared with OZ-PS is a promising product, and our results provide guidance for the preparation of IWO oleogels, such as to increase their applications in the food industry.

Novel Organogels from Mauritia flexuosa L.f and Caryodendron orinocense Karst.: A Topical Alternative

Organogels have importance for topical applications because they can be used to deliver drugs in a controlled and prolonged fashion. These are materials consisting of a three-dimensional network of organic molecules dispersed in a solvent. Recent studies have demonstrated that the solvent could be replaced by oils from non-conventional biologic sources. There is a diversity of not-explored species in the Amazon that are promising sources of vegetable oils with a promising composition. This study developed an organogel with buriti (Mauritia flexuosa L.f) and cacay (Caryodendron orinocense Karst.) oils, using cetostearyl alcohol as an organogelator due to its compatibility, stability, security, affordability, and it is readily available. The oils were characterized, and the organogels were synthesized by studying their crystal evolution and oil-binding capacity. The microstructure was evaluated with polarized light microscopy, fractal dimension, FTIR spectroscopy, XRD, and thermal and rheological analyses. It was found that the critical gelation concentration was higher for cacay oil as it possessed a higher amount of polyunsaturated triacylglycerols. The crystals of the buriti organogel had a smaller lamellar shape, a greater surface area, and physical and thermal stability; although, it presented a slower crystal evolution due to the low number of minor compounds and a greater number of saturated triacylglycerols. The polar fraction of the organogelators as well as triacylglycerol and minor polar compounds are important in forming crystallization nuclei. The study showed that Amazonian oils in crystallization processes form microstructures with differentiating physicochemical properties.

Waxy Oleogels for Partial Substitution of Solid Fat in Margarines

One of the research directions of oleogels is to study the possibility of their practical application in the food industry as an alternative to solid fats. In this work, the possibility of replacing solid fat in margarine (fat content 82.5%) with oleogels was evaluated. The oleogel content varied from 10 to 50% of the fat phase. The concentration of gelator for which beeswax or wax components (9:1 combination of beeswax and hydrocarbons) were used represented 3% in oleogels. The fatty acid composition of the fat components used, their textural characteristics, and their color were studied. The following physicochemical and rheological properties of margarines were determined: color values, textural and thermal characteristics, and sensory properties. The data obtained were processed using principal component analysis (PCA). Oleogels were characterized by lower textural properties compared to commercial fat (CF), but a lower content of saturated fatty acids. When using oleogels, the color characteristics of the margarines changed insignificantly. A decrease in textural and organoleptic properties was shown when using more than 30% oleogel in the composition of margarines. It was found that an increase in the proportion of oleogel leads to a decrease in the melting enthalpy of margarines. The margarines, depending on the ratio of oleogel in the fat phase, were characterized by a content of saturated fatty acids reduced by 7-35% and increased by a 18-92% level of polyunsaturated fatty acids. Thus, the application of oleogels in margarine technology makes it possible to adjust the fatty acid composition while improving the physicochemical properties.

Optimization of Hazelnut Spread Based on Total or Partial Substitution of Palm Oil

Palm oil is widely used in the manufacturing of hazelnut-based spreads due to its unique fatty acid and triacylglycerol profile and, thus, its crystallization behaviour, which makes it suitable for use in fat-based spreadable products. An interesting solution that enables the replacement of palm oil is given by oleogels made with high nutritional quality oil. In this study, the influence of the replacement of palm oil with different glycerol monostearate/olive oil-based oleogels, as well as the influence of the different amounts of GMS employed in oleogel preparation, on the oil binding capacity, spreadability, and rheological and sensory parameters of hazelnut cocoa spreads was investigated. A design of experiment (DoE) approach, with the adoption of the D-optimal design, was used to plan the cocoa hazelnut spread formulations, with the aim being to identify the optimal formulation with desirable quality parameters in terms of Casson's viscosity, spreadability, and oil binding capacity. The resulting optimized formulation was identified in a spread characterized by a total replacement of palm oil with an oleogel made of 95% olive oil and 5% GMS.

Multicomponent Oleogels Prepared with High- and Low-Molecular-Weight Oleogelators: Ethylcellulose and Waxes

The combined interactions between ethylcellulose (EC) and natural waxes to structure edible oil are underexplored. To reduce the high EC concentration required to form a functional oleogel, novel oleogels were prepared using a 50% critical concentration of EC (i.e., 4%) with 1-4% beeswax (BW) and carnauba wax (CRW). One percent wax was sufficient for EC to form self-sustaining oleogel. Rheological analysis demonstrated that 4%EC + 4%BW/CRW had comparable oleogel properties to 8%EC. The yield stress and flow point of wax oleogels were enhanced upon EC addition. EC did not influence the thermal behaviour of the wax component of the oleogel, but the crystallinity and plasticity of the combined oleogel increased. The crystal shape of BW oleogel changed upon EC addition from a needle-like to spherulitic shape. Confocal laser scanning microscopy highlighted the uniform distribution of EC polymeric network and wax crystals. EC/wax mixtures have promising oil-structuring abilities that have the potential to use as solid fat substitutes.

Structural and Physical Characteristics of Mixed-Component Oleogels: Natural Wax and Monoglyceride Interactions in Different Edible Oils

Waxes and monoglycerides (MGs) added in edible oils form oleogels that can be used as an alternative structured fat, providing healthier substitutes to saturated and trans fats in foods. This study aimed to investigate the properties of oleogels formed by the interaction between monoglycerides and different waxes in various edible oils. For this purpose, waxes, namely rice bran (RBW), candelilla (CDW), sunflower (SW), and beeswax (BW), together with MGs in a total concentration level of 15% (w/w) were dissolved in several edible oils (olive, sunflower, sesame, and soybean). The structure and physical properties of oleogels were investigated using texture analysis, polarized light microscopy, melting point measurements, and Fourier-transform infrared spectroscopy (FTIR). The hardest structure was produced by SW/MG (5.18 N), followed by CDW (2.87 N), RBW (2.34 N), BW (2.24 N) and plain MG (1.92 N). Furthermore, RBW and SW led to a higher melting point (69.2 and 67.3 °C) than the plain MG oleogels (64.5 °C). Different crystallization structures, i.e., needle-like crystals and spherulites, were observed depending on the type of wax, its concentration, and the oil used. These results can be used to control the properties of oleogels by adjusting the gelator composition for a variety of potential food applications.

Comparison of diosgenin-vegetable oils oleogels with various unsaturated fatty acids: Physicochemical properties, in-vitro digestion, and potential mechanism

This study aimed to evaluate the influence of gelation and unsaturated fatty acids on the reduced extent of lipolysis between diosgenin (DSG)-based oleogels and oils with various unsaturated fatty acids. Overall, the lipolysis of oleogels was significantly lower than oils. The highest reduced extent of lipolysis (46.23 %) was obtained in linseed oleogels (LOG) while sesame oleogels possessed the lowest (21.17 %). It was suggested LOG discovered the strong van der Waals force to induce the robust gel strength and tight cross-linked network and then increase the contact difficulty between lipase and oils. Correlation analysis revealed that C18:3n-3 was positively correlated with hardness and G' while C18:2n-6 was negative. Thus, the effect on the reduced extent of lipolysis with abundant C18:3n-3 was most significant while that rich in C18:2n-6 was least. These discoveries provided a deepening insight into DSG-based oleogels with various unsaturated fatty acids to design desirable properties.

Trends in Fat Modifications Enabling Alternative Partially Hydrogenated Fat Products Proposed for Advanced Application

The natural properties of oils and fats do not always allow for their direct use in industry (e.g., for food, cosmetics, and pharmaceuticals). Furthermore, such raw materials are often too expensive. Nowadays, the requirements for the quality and safety of fat products are increasing. For this reason, oils and fats are subjected to various modifications that make it possible to obtain a product with the desired characteristics and good quality that meets the needs of product buyers and technologists. The modification techniques of oils and fats change their physical (e.g., raise the melting point) and chemical properties (e.g., fatty acid composition). Conventional fat modification methods (hydrogenation, fractionation, and chemical interesterification) do not always meet the expectations of consumers, nutritionists, and technologists. In particular, Hydrogenation, while it allows us to obtain delicious products from the point of view of technology, is criticised for nutritional reasons. During the partial hydrogenation process, trans-isomers (TFA), dangerous for health, are formed. One of the modifications that meets current environmental requirements and trends in product safety and sustainable production is the enzymatic interesterification of fats. The unquestionable advantages of this process are the wide spectrum of possibilities for designing the product and its functional properties. After the interesterification process, the biologically active fatty acids in the fatty raw materials remain intact. However, this method is associated with high production costs. Oleogelation is a novel method of structuring liquid oils with small oil-gelling substances (even 1%). Based on the type of oleogelator, the methods of preparation can differ. Most oleogels of low molecular weight (waxes, monoglycerides, and sterols) and ethyl cellulose are prepared by dispersion in heated oil, while oleogels of high molecular weight require dehydration of the emulsion system or solvent exchange. This technique does not change the chemical composition of the oils, which allows them to keep their nutritional value. The properties of oleogels can be designed according to technological needs. Therefore, oleogelation is a future-proof solution that can reduce the consumption of TFA and saturated fatty acids while enriching the diet with unsaturated fatty acids. Oleogels can be named "fats of the future" as a new and healthy alternative for partially hydrogenated fats in foods.

A review of oleogels applications in dairy foods

The characteristics of dairy products, such as texture, color, flavor, and nutritional profile, are significantly influenced by the presence of milk fat. However, saturated fatty acids account for 65% of total milk fat. With increased health awareness and regulatory recommendations, consumer preferences have evolved toward low/no saturated fat food products. Reducing the saturated fat content of dairy products to meet market demands is an urgent yet challenging task, as it may compromise product quality and increase production costs. In this regard, oleogels have emerged as a viable milk fat replacement in dairy foods. This review focuses on recent advances in oleogel systems and explores their potential for incorporation into dairy products as a milk fat substitute. Overall, it can be concluded that oleogel can be a potential alternative to replace milk fat fully or partially in the product matrix to improve nutritional profile by mimicking similar rheological and textural product characteristics as milk fat. Furthermore, the impact of consuming oleogel-based dairy foods on digestibility and gut health is also discussed. A thorough comprehension of the application of oleogels in dairy products will provide an opportunity for the dairy sector to develop applications that will appeal to the changing consumer needs.

Food-Grade Oleogels: Trends in Analysis, Characterization, and Applicability

Currently, a large number of scientific articles can be found in the research literature in the field focusing on the use of oleogels for food formulation to improve their nutritional properties. The present review focuses on the most representative food-grade oleogels, highlighting current trends in terms of the most suitable methods of analysis and characterization, as well as trends in their application as substitutes for saturated and trans fats in foods. For this purpose, the physicochemical properties, structure, and composition of some oleogelators are primarily discussed, along with the adequacy of oleogel incorporation for use in edible products. Analysis and characterization of oleogels by different methods are important in the formulation of innovative foods, and therefore, this review discusses the most recent published results regarding their microstructure, rheological and textural properties, and oxidative stability. Last but not least, issues related to the sensory properties of oleogel-based foods are discussed, highlighting also the consumer acceptability of some of them.

Comparative study of natural wax-based W/O emulsion gels: Microstructure and macroscopic properties

In this paper, six kinds of natural wax, including sunflower wax (SFX), rice bran wax (RBX), carnauba Brazilian wax (CBX), beeswax (BWX), candelilla wax (CDX), and sugarcane wax (SGX) were used to prepare water-in-oil (W/O) emulsion gels. Microstructures and rheological properties of all emulsion gels were investigated by microscopy, confocal laser scanning microscope (CLSM), scanning electron microscopy (SEM), and rheometer, respectively. By comparing polarized light images of wax-based emulsion gels and corresponding wax-based oleogels, it could be found that dispersed water droplets greatly affected the crystal distribution and hindered crystal growth. Polarized light microscopy and CLSM images proved that natural wax could perform a dual-stabilization mechanism by interfacial crystallization and crystal networks. SEM images illustrated all waxes except SGX were platelets and formed networks by stacking on top of each other, while flocs-like SGX was easier to adsorb on the interface and formed a "crystalline shell". The surface area and pore formed by different wax varied wildly, which accounted for their differences in the gelation ability, oil binding capacity, and strength of the crystal network. The rheological study showed that all wax had solid-like properties and wax-based oleogels with denser crystal networks correspond to emulsion gels with higher modules. The dense crystal network and interfacial crystallization could improve the stability of W/O emulsion gels proved by recovery rates and critical strain. All the above proved that natural wax-based emulsion gels can be used as stable, low-fat, and thermal-sensitive fat mimics.

Ultrasonic Treatment of Food Colloidal Systems Containing Oleogels: A Review

The use of oleogels as an alternative to solid fats to reduce the content of saturated and trans-isomeric fatty acids is a developing area of research. Studies devoted to the search for methods of obtaining oleogels with given properties are of current interest. Ultrasonic treatment as a method for modifying oleogel properties has been used to solve this problem. The number of publications on the study of the effect of ultrasonic treatment on oleogel properties is increasing. This review aimed to systematize and summarize existing data. It allowed us to identify the incompleteness of this data, assess the effect of ultrasonic treatment on oleogel properties, which depends on various factors, and identify the vector of this direction in the food industry. A more detailed description of the parameters of ultrasonic treatment is needed to compare the results between various publications. Ultrasonic treatment generally leads to a decrease in crystal size and an increase in oil-binding capacity, rheological properties, and hardness. The chemical composition of oleogels and the concentration of gelators, the amplitude and duration of sonication, the cooling rate, and the crystallization process stage at which the treatment occurs are shown to be the factors influencing the efficiency of the ultrasonic treatment.

The Feasibility of Shellac Wax Emulsion Oleogels as Low-Fat Spreads Analyzed by Means of Multidimensional Statistical Analysis

Shellac wax-based oleogel emulsions were studied with a three level two factorial design in order to find an optimal formulation for a spread formulation. Rheological, textural, colorimetry, and stability analysis were conducted to assess the performance of oleogel emulsions. FTIR spectra were also compared. The similarities between the samples were studied using cluster analysis. Analysis of variance (ANOVA) demonstrates that (i) the texture is influenced by the wax concentration, (ii) the rheology and stability by both the considered numeric factors (wax and water concentration) and their interaction, and (iii) the color by both factors. The emulsions containing 7% (m/m) shellac oleogels behaved like the strongest systems, (G′ & GLVR > 30,000 Pa) and exhibited the highest value of the G′-G″ cross-over. The lowest oil binding capacity (OBC) was 99.88% for the sample with 3% (m/m) shellac and 20% (m/m) water. The whiteness index (Windex) varied between 58.12 and 78.50. The optimization process indicated that a formulation based on 4.29% (m/m) shellac wax and 24.13% (m/m) water was suitable as a low-fat spread.