In Vitro Salivary Protein Adsorption Profile on Titanium and Ceramic Surfaces and the Corresponding Putative Immunological Implications

Salivary Pellicle Formed on Dental Composites Evaluated by Mass Spectrometry-An In Situ Study

(1) Background: In the oral environment, sound enamel and dental restorative materials are immediately covered by a pellicle layer, which enables bacteria to attach. For the development of new materials with repellent surface functions, information on the formation and maturation of salivary pellicles is crucial. Therefore, the present in situ study aimed to investigate the proteomic profile of salivary pellicles formed on different dental composites. (2) Methods: Light-cured composite and bovine enamel samples (controls) were exposed to the oral cavity for 30, 90, and 120 min. All samples were subjected to optical and mechanical profilometry, as well as SEM surface evaluation. Acquired pellicles and unstimulated whole saliva samples were analyzed by SELDI-TOF-MS. The significance was determined by the generalized estimation equation and the post-hoc bonferroni adjustment. (3) Results: SEM revealed the formation of homogeneous pellicles on all test and control surfaces. Profilometry showed that composite surfaces tend to be of higher roughness compared to enamel. SELDI-TOF-MS detected up to 102 different proteins in the saliva samples and up to 46 proteins in the pellicle. Significant differences among 14 pellicle proteins were found between the composite materials and the controls. (4) Conclusions: Pellicle formation was material- and time-dependent. Proteins differed among the composites and to the control.

Proteomic profile of in situ acquired pellicle on tooth and restorative material surfaces

OBJECTIVES

To evaluate and compare the proteomic profile of acquired pellicle on smooth bovine tooth and tooth-coloured restorative materials, including resin composite (RC), glass ionomer cement (GIC), and casein phosphopeptide-amorphous calcium phosphate modified GIC (CPP-ACP GIC).

METHODS

Two-hour in situ pellicles on tooth/materials specimens mounted in oral appliances worn by ten healthy adults were investigated. Pellicle proteins and corresponding unstimulated whole saliva were quantitatively analysed through liquid chromatography-tandem mass spectrometry.

RESULTS

Significantly higher amounts of protein were adsorbed onto tooth surface than restorative materials tested (4.11 ± 0.69 vs. 2.54 ± 0.38/2.98 ± 0.80/3.01 ± 0.37 µg, RC/GIC/CPP-ACP GIC). From the ten participants, 1,444 (487-1,086/person), 1,454 (645-1,051/person), 1,731 (454-1,475/person), or 1,597 (423-1,261/person) pellicle proteins were detected at least once on bovine tooth, RC, GIC, or CPP-ACP GIC, respectively, and with 1,072 (304-793/person) salivary proteins identified. Comparative quantification revealed minor differences between tooth and restorative materials pellicle profiles. High inter-individual variations in pellicle protein composition were demonstrated. Compared to the salivary protein profile, 214/57 proteins showed significantly increased/decreased abundance in pellicle formed on at least one substrate (fold change > 3.325/fold change < 0.301). Gene Ontology enrichment analysis showed some pellicle proteins detected with increased affinity to tooth/material surface were identified as being related to "calcium-dependent protein binding" or "cell-cell adhesion mediator activity".

CONCLUSION

Similar protein quantity and composition was observed in 2 h in situ pellicles formed on different smooth restorative material surfaces. The proteomic profile of pellicles appeared distinct from that of the corresponding unstimulated whole saliva.

CLINICAL SIGNIFICANCE

Host backgrounds appeared more influential on the proteomic profile of the in situ acquired pellicle than the underlying substrate characteristics among systemically and orally healthy adults. Pellicle proteins preferentially adsorbed on tooth/materials were putatively associated with calcium ion homeostasis or host-microbiota interaction.

peri-implant ligament

The peri-implant ligament is formed from the interface of bone tissue, through the anchoring of proteins and the surface of the dental implant. In this sense, it is relevant to understand the extent to which this ligament is structured and biomimics the periodontal ligament functions. Aim: The goal of this scoping review is to present and analyze the peri-implant ligament composition and compare the extent to which this ligament is structured and biomimics the periodontal ligament functions. Methods: This scoping review was performed according to the Joanna Briggs Institute methodology for scoping reviews and following the Preferred Reporting Items for Systematic Reviews and Meta-analyses extension for scoping review. Two independent researchers searched Pubmed, Cochrane, Embase, Virtual Health Library, Scielo, Scopus, Web of Science, Brazilian Bibliography of Dentistry, Latin American and Caribbean Literature in Health Sciences, Digital Library of Theses and Dissertations from the University of São Paulo and Portal Capes. Studies published in English, Portuguese and Spanish, over the last 21 years (2000-2021). Results: A total of 330 titles were identified and after applying inclusion and exclusion factors, 27 studies were included in this review. All proteins were identified regarding their tissue function and classified into 6 major protein groups. After that this new protein ligament was compared with the periodontal ligament regarding its function and composition. The main proteins associated with osseointegration, and thus, with the peri-implant ligament are recognized as belonging to the periodontal ligament. Conclusion: This scoping review results suggest evidence of the composition and function of the periimplant ligament. However, variations may still exist due to the existence of several modulants of the osseointegration process.

Functional biomedical materials derived from proteins in the acquired salivary pellicle

In the oral environment, the acquired salivary pellicle (ASP) on the tooth surface comprises proteins, glycoproteins, carbohydrates, and lipids. The ASP can specifically and rapidly adsorb on the enamel surface to provide effective lubrication, protection, hydration, and remineralisation, as well as be recognised by various bacteria to form a microbial biofilm (plaque). The involved proteins, particularly various phosphoproteins such as statherins, histatins, and proline-rich proteins, are vital to their specific functions. This review first describes the relationship between the biological functions of these proteins and their structures. Subsequently, recent advances in functional biomedical materials derived from these proteins are reviewed in terms of dental/bone therapeutic materials, antibacterial materials, tissue engineering materials, and coatings for medical devices. Finally, perspectives and challenges regarding the rational design and biomedical applications of ASP-derived materials are discussed.

Titanium and Protein Adsorption: An Overview of Mechanisms and Effects of Surface Features

Titanium and its alloys, specially Ti6Al4V, are among the most employed materials in orthopedic and dental implants. Cells response and osseointegration of implant devices are strongly dependent on the body-biomaterial interface zone. This interface is mainly defined by proteins: They adsorb immediately after implantation from blood and biological fluids, forming a layer on implant surfaces. Therefore, it is of utmost importance to understand which features of biomaterials surfaces influence formation of the protein layer and how to guide it. In this paper, relevant literature of the last 15 years about protein adsorption on titanium-based materials is reviewed. How the surface characteristics affect protein adsorption is investigated, aiming to provide an as comprehensive a picture as possible of adsorption mechanisms and type of chemical bonding with the surface, as well as of the characterization techniques effectively applied to model and real implant surfaces. Surface free energy, charge, microroughness, and hydroxylation degree have been found to be the main surface parameters to affect the amount of adsorbed proteins. On the other hand, the conformation of adsorbed proteins is mainly dictated by the protein structure, surface topography at the nano-scale, and exposed functional groups. Protein adsorption on titanium surfaces still needs further clarification, in particular concerning adsorption from complex protein solutions. In addition, characterization techniques to investigate and compare the different aspects of protein adsorption on different surfaces (in terms of roughness and chemistry) shall be developed.

Antimicrobial Prosthetic Surfaces in the Oral Cavity-A Perspective on Creative Approaches

Replacement of missing teeth is an essential component of comprehensive dental care for patients suffering of edentulism. A popular option is implant-supported restorations. However, implant surfaces can become colonized with polymicrobial biofilms containing Candida species that may compromise peri-implant health. To prevent this, implant components may be treated with a variety of coatings to create surfaces that either repel the attachment of viable microorganisms or kill microorganisms on contact. These coatings may consist of nanoparticles of pure elements (more commonly silver, copper, and zinc), sanitizing agents and disinfectants (quaternary ammonium ions and chlorhexidine), antibiotics (cefalotin, vancomycin, and gentamicin), or antimicrobial peptides (AMPs). AMPs in bioactive coatings have a number of advantages. They elicit a protective action against pathogens, inhibit the formation of biofilms, are less toxic to host tissues, and do not prompt inflammatory responses. Furthermore, many of these coatings may involve unique delivery systems to direct their antimicrobial capacity against pathogens, but not commensals. Coatings may also contain multiple antimicrobial substances to widen antimicrobial activity across multiple microbial species. Here, we compiled relevant information about a variety of creative approaches used to generate antimicrobial prosthetic surfaces in the oral cavity with the purpose of facilitating implant integration and peri-implant tissue health.