Bacteriological Evaluation of Gingival Crevicular Fluid in Teeth Restored Using Fixed Dental Prostheses: An In Vivo Study

Analysis of subgingival microbiota and IL-1β, TNF-α and CX3CL1 levels in gingival crevicular fluid of fixed dental prostheses

Prosthetic biomaterials can affect the composition of the subgingival microbiota and consequently the production of proinflammatory cytokines, causing damage to the periodontium. A total of 40 patients were divided into two groups: 20 with monolithic zirconia (MZ) prostheses and 20 with porcelain fused to metal (PFM) with nickel-chromium (Ni-Cr) alloy prostheses. Subgingival plaque and gingival crevicular fluid samples were taken. The Checkerboard technique for DNA-DNA hybridization and the enzyme-linked immunosorbent assay technique were performed. Teeth with MZ presented a lower percentage of bleeding on probing and tooth mobility compared to teeth with PFM with Ni-Cr alloy. Prosthodontic teeth harbored higher total levels of the 18 bacterial species than non-prosthodontic teeth. There was a higher prevalence of S. gordonii and V. parvula species in PFM with Ni-Cr alloy compared to MZ. There was an increase in IL-1β, TNF-α and CX3CL1 levels in PFM with Ni-Cr alloy compared to MZ. MZ is a candidate biomaterial with fewer negative effects on the periodontium, allowing for longer prostheses longevity in the mouth.

The role of periodontitis-associated bacteria in Alzheimer's disease: A narrative review

Alzheimer's disease causes memory loss and dementia in older adults through a neurodegenerative mechanism. Despite the pathophysiological clarification of this cognitive disorder, novel molecular and cellular pathways should be identified to determine its exact mechanism. Alzheimer's disease (AD) is pathologically characterized by senile plaques comprising beta-amyloid and neurofibrillary tangles (NFTs) formed by hyperphosphorylated tau as a microtubule-associated protein with a key role in the pathogenesis of AD. Periodontitis through inflammatory pathways is a risk factor for deteriorating cognitive impairment in AD patients. Poor oral hygiene coupled with immunocompromised status in older adults causes periodontal diseases and chronic inflammations through an oral bacterial imbalance. Toxic bacterial products, including bacteria themselves, can reach the central nervous system through the bloodstream and evoke inflammatory responses. The present review was conducted to investigate relationships between AD and periodontitis-involved bacteria as a risk factor.

Comparative Evaluation of the Accuracy of Gingival Thickness Measurement by Clinical Evaluation and Intraoral Ultrasonography

This study aimed to investigate the accuracy of gingival thickness measurement by two methods of clinical evaluation and intraoral ultrasonography. The gingival thickness was measured in the midbuccal area of the right maxillary lateral incisor and first molar teeth in 30 individuals. For clinical measurement, a #15 K-file with rubber stops was vertically inserted 2 mm apical to the gingival margin and the length of the file in the tissue was measured using a digital caliper. Ultrasonographic measurement was performed using an intraoral probe on the gingival surface in the midbuccal area, at the entry point of the file. Statistical analysis was performed by paired t-test, correlation coefficient, and receiver operating characteristic (ROC) curve (α = 0.05). In the anterior region, the mean gingival thicknesses using ultrasonography (1.517 ± 0.293 mm) and clinical evaluation (1.610 ± 0.272 mm) were not significantly different (p = 0.434). In the posterior region, the mean gingival thicknesses were significantly different between ultrasonography (1.372 ± 0.442 mm) and clinical evaluation (1.626 ± 0.310 mm) (p = 0.006). The area under ROC curve values for ultrasonographic measurements in the anterior and posterior regions were 0.681 and 0.597, respectively. The use of ultrasonography with an intraoral probe has acceptable accuracy for the determination of gingival thickness, especially for the anterior regions.

The Influence of Fixed Dental Prostheses on the Expression of Inflammatory Markers and Periodontal Status-Narrative Review

A dental prosthesis will only be successful if the restoration lasts for a long period and does not cause any illness. The presence of permanent prosthetic restorations has been linked to an increased risk of periodontal infections, according to a large body of research that has been gathered. When chronic inflammation is brought on by fixed prosthetic constructions, both cellular and noncellular immunity are activated as adaptive immune mechanisms. It has previously been stated that both clinically adequate and inadequate restorations might cause gingival inflammation. Areas surrounding the abutment teeth presented periodontal pockets, attachment loss, congestion, bleeding on probing, and gingival hyperplasia after fixed restorations were removed. The depth of pockets, bleeding on probing, and bone loss are all closely correlated with disease's severity and IL-1β concentration in gingival crevicular fluid; IL-1β shows higher values in disease sites than in healthy ones. hs-CRP and TNF-α blood levels showed a considerable reduction one day after fixed restorations were applied, in comparison with the pre-treatment values. Collaboration between prosthodontists and periodontists is essential for a good treatment outcome since it will increase the restoration's lifespan, enhance periodontal health, and improve the quality of life for dental patients.

Interactions between systemic diseases and oral microbiota shifts in the aging community: A narrative review

As a gateway to general health and a diverse microbial habitat, the oral cavity is colonized by numerous microorganisms such as bacteria, fungi, viruses, and archaea. Oral microbiota plays an essential role in preserving oral health. Besides, the oral cavity also significantly contributes to systemic health. Physiological aging influences all body systems, including the oral microbial inhabitants. The cited effect can cause diseases by forming dysbiotic communities. Since it has been demonstrated that microbial dysbiosis could disturb the symbiosis state between the host and the resident microorganism, shifting the condition toward a more pathogenic one, this study investigated how the oral microbial shifts in aging could associate with the development or progression of systemic diseases in older adults. The current study focused on the interactions between variations in the oral microbiome and prevalent diseases in older adults, including diabetes mellitus, Sjögren's syndrome, rheumatoid arthritis, pulmonary diseases, cardiovascular diseases, oral candidiasis, Parkinson's disease, Alzheimer's disease, and glaucoma. Underlying diseases can dynamically modify the oral ecology and the composition of its resident oral microbiome. Clinical, experimental, and epidemiological research suggests the associations of systemic disorders with bacteremia and inflammation after oral microbial changes in older adults.

Characterization of the Oral Microbiome in Wearers of Fixed and Removable Implant or Non-Implant-Supported Prostheses in Healthy and Pathological Oral Conditions: A Narrative Review

Oral commensal microorganisms perform very important functions such as contributing to the health of the host. However, the oral microbiota also plays an important role in the pathogenesis and development of various oral and systemic diseases. The oral microbiome may be characterized by a higher prevalence of some microorganisms than others in subjects with removable or fixed prostheses, depending on oral health conditions, the prosthetic materials used, and any pathological conditions brought about by inadequate prosthetic manufacturing or poor oral hygiene. Both biotic and abiotic surfaces of removable and fixed prostheses can be easily colonized by bacteria, fungi, and viruses, which can become potential pathogens. The oral hygiene of denture wearers is often inadequate, and this can promote oral dysbiosis and the switch of microorganisms from commensal to pathogens. In light of what emerged from this review, fixed and removable dental prostheses on teeth and on implants are subject to bacterial colonization and can contribute to the formation of bacterial plaque. It is of fundamental importance to carry out the daily hygiene procedures of prosthetic products, to design the prosthesis to facilitate the patient's home oral hygiene practices, and to use products against plaque accumulation or capable of reducing oral dysbiosis to improve patients' home oral practices. Therefore, this review primarily aimed to analyze the oral microbiome composition in fixed and removable implant or non-implant-supported prostheses wearers in healthy and pathological oral conditions. Secondly, this review aims to point out related periodontal self-care recommendations for oral dysbiosis prevention and periodontal health maintenance in fixed and removable implant or non-implant-supported prostheses wearers.

Dental Luting Cements: An Updated Comprehensive Review

The cementation of indirect restoration is one of the most important steps in prosthetic and restorative dentistry. Cementation aims to bond the prosthetic restoration to the prepared enamel or enamel and dentine. Successful cementation protocols prevent biofilm formation at the margin between tooth and restoration and minimize mechanical and biological complications. With the advancements in dental cements, they have been modified to be versatile in terms of handling, curing, and bond strengths. This review presents updates on dental cements, focusing on the composition, properties, advantages, limitations, and indications of the various cements available. Currently, dental restorations are made from various biomaterials, and depending on each clinical case, an appropriate luting material will be selected. There is no luting material that can be universally used. Therefore, it is important to distinguish the physical, mechanical, and biological properties of luting materials in order to identify the best options for each case. Nowadays, the most commonly used dental cements are glass-ionomer and resin cement. The type, shade, thickness of resin cement and the shade of the ceramic, all together, have a tangible influence on the final restoration color. Surface treatments of the restoration increase the microtensile bond strength. Hence, the proper surface treatment protocol of both the substrate and restoration surfaces is needed before cementation. Additionally, the manufacturer's instructions for the thin cement-layer thickness are important for the long-term success of the restoration.

Potential Impact of Prosthetic Biomaterials on the Periodontium: A Comprehensive Review

The success of a prosthetic treatment is closely related to the periodontal health of the individual. The aim of this article was to review and present the importance of prosthetic restorative materials on the condition of the periodontium, the changes that occur in the composition of the subgingival microbiota and the levels of inflammatory markers in gingival crevicular fluid. Articles on the influence of different prosthetic restorative materials on subgingival microbiota and proinflammatory cytokines were searched for using the keywords "prosthetic biomaterials", "fixed prosthesis", "periodontal health", "subgingival microbiota", "periodontal biomarkers" and "gingival crevicular fluid" in PubMed/Medline, Science Direct, Scopus and Google Scholar. The type of material used for prosthesis fabrication together with poor marginal and internal fit can result in changes in the composition of the subgingival microbiota, as well as increased accumulation and retention of dentobacterial plaque, thus favoring the development of periodontal disease and prosthetic treatment failure. Biological markers have helped to understand the inflammatory response of different prosthetic materials on periodontal tissues with the main purpose of improving their clinical application in patients who need them. Metal-free ceramic prostheses induce a lower inflammatory response regardless of the fabrication method; however, the use of CAD/CAM systems is recommended for their fabrication. In addition, it is presumed that metal-ceramic prostheses cause changes in the composition of the subgingival microbiota producing a more dysbiotic biofilm with a higher prevalence of periodontopathogenic bacteria, which may further favor periodontal deterioration.

Current Infections of the Orofacial Region: Treatment, Diagnosis, and Epidemiology

Undoubtedly, diagnosing and managing infections is one of the most challenging issues for orofacial clinicians. As a result of the diversity of symptoms, complicated behavior, and sometimes confusing nature of these conditions, it has become increasingly difficult to diagnose and treat them. It also highlights the need to gain a deeper insight into the orofacial microbiome as we try to improve our understanding of it. In addition to changes in patients' lifestyles, such as changes in diet, smoking habits, sexual practices, immunosuppressive conditions, and occupational exposures, there have been changes in patients' lifestyles that complicate the issue. Recent years have seen the development of new infection treatments due to the increased knowledge about the biology and physiology of infections. This review aimed to provide a comprehensive overview of the types of infections in the mouth, including the types that viruses, fungi, or bacteria may cause. It is important to note that we searched the published literature in the Scopus, Medline, Google Scholar, and Cochran databases from 2010 to 2021 using the following keywords: "Orofacial/Oral Infections," "Viral/Fungal/Bacterial Infections", "Oral Microbiota" And "Oral Microflora" without limiting our search to languages and study designs. According to the evidence, the most common infections in the clinic include herpes simplex virus, human papillomavirus, Candida albicans, Aspergillus, Actinomycosis, and Streptococcus mutans. The purpose of this study is to review the new findings on characteristics, epidemiology, risk factors, clinical manifestations, diagnosis, and new treatment for these types of infectious diseases.

Comparison of Regular and Speed Sintering on Low-Temperature Degradation and Fatigue Resistance of Translucent Zirconia Crowns for Implants: An In Vitro Study

BACKGROUND

Although there are a few studies which compare fast and slow sintering in normal zirconia crowns, it is essential to compare the cracks and load-bearing capacity in zirconia screw-retained implant crowns between regular and speed sintering protocols. This research aimed to compare the surface structure, cracks, and load-bearing capacity in zirconia screw-retained implant crowns between regular sintering (RS) and speed sintering (SS) protocol with and without cyclic loading (fatigue).

METHODS

A total of 60 screw-retained crowns were fabricated from zirconia (Katana STML Block) by the CAD/CAM system. Then, 30 crowns were subjected to the RS protocol and 30 crowns were subjected to the SS protocol. Cyclic loading was done in half zirconia crowns (15 crowns in each group) using a chewing simulator CS-4.8/CS-4.4 at room temperature. The loading force was applied on the middle of the crowns by a metal stylus underwater at room temperature with a chewing simulator at an axial 50 N load for 240,000 cycles and lateral movement at 2 mm. Scanning electron microscopy was done to study the surface of the crowns and the cracks in the crowns of the regular and speed sintering protocols, with and without fatigue.

RESULTS

For the speed sintering group, the surface looks more uniform, and the crack lines are present at a short distance compared to regular sintering. The sintering protocol with a larger Weibull module and durability increases the reliability. It showed that the Speed group showed the maximum fracture load, followed by the regular, speed fatigue, and regular fatigue groups. The fracture load in various groups showed significant differences.

CONCLUSIONS

It was found that the speed group showed the maximum fracture load followed by the regular, speed fatigue, and regular fatigue. The crack lines ran from occlusal to bottoms (gingiva) and the arrest lines were perpendicular to the crack propagations.

Biomolecular and Biochemical Aspects of the Oral Cavity

Recent advances in science, especially innovations in the field of biochemistry and materials science, greatly contribute to improvements in the prevention, diagnosis, and treatment of oral diseases [...].

Erbium-doped yttrium aluminum garnet laser and advanced platelet-rich fibrin+ in periodontal diseases: Two case reports and review of the literature

BACKGROUND

The goal of periodontal disease treatment is to completely remove bacteria and promote wound healing. The erbium-doped yttrium aluminum garnet (Er:YAG) laser is commonly used to treat periodontal disease. Advanced platelet-rich fibrin+ (A-PRF+) secrets growth factors that accelerates soft- and hard-tissue regeneration and wound healing. Herein I present 2 cases of patients with oral diseases treated with a combination of Er:YAG laser and A-PRF+.

CASE SUMMARY

Case 1 was a female with pocket depth bone loss over 8 mm and infection of tooth 31 and 41, and severe advanced periodontitis with grade III mobility. Case 2 was a male with tooth 22 root end apical swelling and infection and alveolar bony defects. Clinical outcomes were recorded at 6 and 36 mo. In case 1, the Er:YAG laser was used to perform open flap debridement (100 mJ/pulse, 15 Hz) and remove calculus and granulation tissue (50 mJ/pulse, 30 Hz). In case 2 the laser was used to create a semilunar full thickness flap incision (80 mJ/pulse, 20 Hz) and eliminate the pathogen (100 mJ/pulse, 15 Hz). In both patients, A-PRF+ mixed with bone was used to fill bone defects, and A-PRF+ autologous membranes were used to cover tension-free primary flaps. There was no recurrent infection at 36 mo, and tissue regeneration and would healing occurred.

CONCLUSION

Debridement with an Er:YAG laser followed by treatment with A-PRF+ is effective for the treatment periodontal diseases with bone defects.

Synthetic materials in craniofacial regenerative medicine: A comprehensive overview

The state-of-the-art approach to regenerating different tissues and organs is tissue engineering which includes the three parts of stem cells (SCs), scaffolds, and growth factors. Cellular behaviors such as propagation, differentiation, and assembling the extracellular matrix (ECM) are influenced by the cell's microenvironment. Imitating the cell's natural environment, such as scaffolds, is vital to create appropriate tissue. Craniofacial tissue engineering refers to regenerating tissues found in the brain and the face parts such as bone, muscle, and artery. More biocompatible and biodegradable scaffolds are more commensurate with tissue remodeling and more appropriate for cell culture, signaling, and adhesion. Synthetic materials play significant roles and have become more prevalent in medical applications. They have also been used in different forms for producing a microenvironment as ECM for cells. Synthetic scaffolds may be comprised of polymers, bioceramics, or hybrids of natural/synthetic materials. Synthetic scaffolds have produced ECM-like materials that can properly mimic and regulate the tissue microenvironment's physical, mechanical, chemical, and biological properties, manage adherence of biomolecules and adjust the material's degradability. The present review article is focused on synthetic materials used in craniofacial tissue engineering in recent decades.

Immunoglobulin Disorders and the Oral Cavity: A Narrative Review

The oral mucosa is a mechanical barrier against the penetration and colonization of microorganisms. Oral homeostasis is maintained by congenital and adaptive systems in conjunction with normal oral flora and an intact oral mucosa. Components contributing to the defense of the oral cavity include the salivary glands, innate antimicrobial proteins of saliva, plasma proteins, circulating white blood cells, keratinocyte products of the oral mucosa, and gingival crevicular fluid. General disturbances in the level of immunoglobulins in the human body may be manifested as pathological lesions in the oral mucosa. Symptoms of immunoglobulin-related general diseases such as mucous membrane pemphigoid (MMP), pemphigus vulgaris (PV), linear IgA bullous dermatosis (LABD), Epidermolysis Bullosa Aquisita (EBA), and Hyper-IgE syndrome (HIES) may appear in the oral cavity. In this review, authors present selected diseases associated with immunoglobulins in which the lesions appear in the oral cavity. Early detection and treatment of autoimmune diseases, sometimes showing a severe evolution (e.g., PV), allow the control of their dissemination and involvement of skin or other body organs. Immunoglobulin disorders with oral manifestations are not common, but knowledge, differentiation and diagnosis are essential for proper treatment.

Effect of Erosive Agents on Surface Characteristics of Nano-Fluorapatite Ceramic: An In-Vitro Study

Erosive beverages cause dissolution of natural teeth and intra-oral restorations, resulting in surface characteristic changes, particularly roughness and degradation. The purpose of this study was to evaluate the surface roughness and topography of a dental ceramic following immersion in locally available erosive solutions. A total of 160 disc specimens of a nano-fluorapatite type ceramic (12 mm diameter and 2 mm thickness) were fabricated and equally distributed into two groups (n = 80) and then evenly distributed among the following five testing groups (n = 16): lemon juice, citrate buffer solution, 4% acetic acid, soft cola drink, and distilled water which served as a control. The surface roughness (Ra) and topography were evaluated using a profilometer and scanning electron microscope at baseline, 24 h, 96 h, and 168 h respectively. Data were analyzed using ANOVA and Tukey’s multiple comparisons (p ≤ 0.05). Surface changes were observed upon exposure to all acidic beverages except distilled water. Amongst all immersion media, 4% acetic acid produced the most severe surface roughness across all time periods (i.e., baseline, 24 h, 96 h, and 168 h). A statistically significant difference in the surface roughness values between all immersion media and across all four time intervals was observed. Erosive agents had a negative effect on the surface roughness and topography of the tested ceramic. The surface roughness increased with increased storage time intervals.

Tooth root resorption: A review

Tooth root resorption is multifactorial, leading to progressive destruction and eventual loss of tooth root dentin and cement. There are internal and external types of root resorption, each having its variety. The etiology and pathogenesis of tooth root resorption are poorly understood, and the most significant etiological factors are trauma, pulpal infection, tooth bleaching, and orthodontic treatment. Tooth root resorption is primarily asymptomatic; thus, it is revealed accidentally by radiographic examination. Progressive clinical manifestations are pain, tooth discoloration, tooth mobility, and other conditions. Awareness of the causes and risk factors allowing tooth root resorption, and regular radiographic examination, in case of necessity, make it possible to reveal resorption at an early stage and to prevent its further development. Thus, the aim of this study is to present etiopathogenesis, a clinical course, and diagnostic peculiarities of internal and external types of tooth root resorption, enabling practicing dentists to timely diagnose root resorption and take appropriate measures to avoid further complications. Within the limitation of this review, even though the etiopathogenesis of tooth root resorption is yet not fully understood, it is suggested that the etiological factors fall into two groups (endogenic and exogenic) to enhance further understanding of the possible causes and mechanisms of root resorption and allow practitioners to monitor high-risk patients and make timely diagnoses. Moreover, radiographic examination and CBCT are indispensable for the diagnosis of root resorption.

[Optical and mechanical properties of translucent zirconium as an optimal restorative material in fixed prosthesis: A review of the literature]

Introduction

The main consequence of not treating tooth decay in time is the total or partial loss of the tooth. One of the alternatives to replace the lost tooth and return the functions is through fixed prostheses. Today there are 3 generations of yttrium-stabilized zirconium polycrystals (Y-TZP). Seeing that in the third Generation the yttrium content was increased to approximately 5% in moles (5Y), stabilizing the materials approximately 50% of cubic phase and 50% of tetragonal phase, thus giving a translucent zirconium (5Y) with a high aesthetics and greater naturalness to the dental crown.

Objective

To identify the different optical and mechanical properties of translucent zirconium compared to other restorative materials used in fixed prostheses.

Materials and methods

This narrative review evaluated 115 scientific articles from the Medline information sources (via PubMed), Science Direct, Scopus, SciELO and LILACS from the last 5 years, published in Spanish, Portuguese and English. We included 51 articles that met the selection criteria which were randomized clinical trials and observational studies, in vitro studies and in vivo studies that evaluated the optical and mechanical properties of translucent zirconium as an optimal restorative material in fixed prostheses. We excluded systematic reviews, case reports and editorials.

Results

It was observed that zirconium being a relatively new material and in constant evolution has studies mostly in vitro, among which stand out those that speak both of the mechanical and optical properties that vary depending on the generation to which the material belongs, as well as the adhesiveness of the material which is for now not viable, therefore, it is essential that more studies be carried out on this material.

Conclusions

We can mention that zirconium has evolved over time, providing better optical properties, but as a consequence it has been reducing flexural strength and fracture toughness. However, this material provides good biocompatibility with oral structures. On the other hand, translucent zirconium according to studies is a non-recordable material, so new methods are sought to improve its adhesion.

Analysis of subgingival microbiota in monozygotic twins with different severity and progression risk of periodontitis

The study aims to reveal the composition of subgingival bacteria in monozygotic twins with discordant in severity and progression risk of periodontitis. Microbiome analysis indicated that most bacteria were heritable but differed in their abundance and immune response. The dysbiotic bacteria can be considered as risk markers for periodontitis progression.

Synthesis of Silver Nanoparticles from Extracts of Wild Ginger (Zingiber zerumbet) with Antibacterial Activity against Selective Multidrug Resistant Oral Bacteria

Antibiotic resistance rate is rising worldwide. Silver nanoparticles (AgNPs) are potent for fighting antimicrobial resistance (AMR), independently or synergistically. The purpose of this study was to prepare AgNPs using wild ginger extracts and to evaluate the antibacterial efficacy of these AgNPs against multidrug-resistant (MDR) Staphylococcus aureus, Streptococcus mutans, and Enterococcus faecalis. AgNPs were synthesized using wild ginger extracts at room temperature through different parameters for optimization, i.e., pH and variable molar concentration. Synthesis of AgNPs was confirmed by UV/visible spectroscopy and further characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy analysis (EDXA), and Fourier-transform infrared spectroscopy (FTIR). Disc and agar well diffusion techniques were utilized to determine the in vitro antibacterial activity of plant extracts and AgNPs. The surface plasmon resonance peaks in absorption spectra for silver suspension showed the absorption maxima in the range of 400–420 nm. Functional biomolecules such as N–H, C–H, O–H, C–O, and C–O–C were present in Zingiber zerumbet (Z. zerumbet) (aqueous and organic extracts) responsible for the AgNP formation characterized by FTIR. The crystalline structure of ZZAE-AgCl-NPs and ZZEE-AgCl-NPs was displayed in the XRD analysis. SEM analysis revealed the surface morphology. The EDXA analysis also confirmed the element of silver. It was revealed that AgNPs were seemingly spherical in morphology. The biosynthesized AgNPs exhibited complete antibacterial activity against the tested MDR bacterial strains. This study indicates that AgNPs of wild ginger extracts exhibit potent antibacterial activity against MDR bacterial strains.

Multidisciplinary non-surgical treatment of advanced periodontitis: A case report

BACKGROUND

Patients with severe periodontitis often require multidisciplinary treatment to achieve healthy periodontal tissue, normal occlusion, and optimal aesthetics. In the present study, we aimed to evaluate the efficacy of multidisciplinary non-surgical treatment in a patient with stage IV/ grade C periodontitis, malocclusion, and dentition defects.

CASE SUMMARY

A 47-year-old woman visited our periodontology department due to teeth mobility problems and difficulties chewing food. The patient had no history of drug allergies or systemic disease. Initial therapy involved scaling and root planning with a Gracey scaler and periodontal ultrasonic therapeutic apparatus using a periodontal endoscope (Perioscopy, Zest Dental Solutions, United States) to control the periodontal inflammation prior to treatment. Five months later, orthodontic treatment was then performed to treat occlusion and overall aesthetics. After completion, a Maryland bridge was used to restore Nos. 22, 31, and 41 teeth. Florida probing (Florida probe, United States) was performed every 2-3 mo to evaluate the periodontal condition throughout treatment. Overall, multidisciplinary non-surgical treatment resulted in satisfactory aesthetic results with healthy periodontal tissue and stable occlusion.

CONCLUSION

In some patients with stage IV/grade C periodontitis, systematic and sequential non-surgical treatment can provide excellent therapeutic results.

Bruxism Influence on Volume and Interleukin-1β Concentration of Gingival Crevicular Fluid: A Preliminary Study

Bruxism is occlusal behaviour that often leads to stomatognathic system overload. Inflammatory markers in the periodontium are detectable in the gingival crevicular fluid (GCF). GCF production fluctuates due to various factors. Our study aimed to assess the effect of tooth clenching or grinding on GCF volume and proinflammatory IL-1β concentration in GCF. This pilot study was carried out on 20 participants aged 21 to 28 with good general health (per 10 people studied and control groups). GCF volume was measured with Periotron 8010 after absorbing for 30 s with PerioPaper strips. Twelve samples were collected from each patient—the buccal and lingual surfaces of teeth 16, 11, 24, 36, 31, and 44 were included. Laboratory examination of IL-1β concentration was performed. In patients with pathological tooth wear, a tendency to increase GCF secretion and IL-1β concentration in GCF was found. GCF volumes were higher in posterior teeth, while IL-1β levels were higher in anterior teeth. Crevices at the molars seem to have a potential predictive value in diagnosing periodontal microinflammation in patients with probable bruxism. Due to occlusal overload, these bruxists are more prone to microinflammatory processes in the periodontium. Further studies in a broader group are required to confirm this correlation.

Evaluation of Zirconia and High Performance Polymer Abutment Surface Roughness and Stress Concentration for Implant-Supported Fixed Dental Prostheses

Background: The High Performance Polymer is a based polymer biomaterial that was introduced as dental material to manufacture dentures superstructure and dental implants abutments. However, its surface characteristics and stress state still need to be properly described. The aim of this study was to compare the surface characteristics of a High Performance Polymer (Bio-HPP, Bredent, Senden, Germany) for computer-aided design and computer-aided manufacturing (CAD/CAM) milling and a Zirconia (Zirkonzahn, Steger, Ahrntal, Italy). Methods: The abutments surface roughness (Ra) was evaluated for each abutment material (N = 12) using a confocal laser microscope. Data were evaluated using One-Way ANOVA and Tukey tests (p < 0.05). In addition, a finite element analysis software was used to present stress measurement data as stress maps with 100 N loading. Results were generated according to Von-mises stress criteria and stress peaks were recorded from each structure. Results: Results showed a mean Ra of 0.221 ± 0.09 μm for Bio-HPP and 1.075 ± 0.24 μm for Zirconia. Both surface profiles presented a smooth characteristic regardless the measurement axis. The stress peaks from implant fixture and screw were not affected by the abutment material, however the high performance polymer showed the highest stress magnitude for the abutment region. Conclusions: Comparing the present results with the literature it is suggested that the CAD/CAM High Performance Polymer abutments present an adequate surface roughness with acceptable values of stress.

Fixed Prosthetic Restorations and Periodontal Health: A Narrative Review

Periodontal health plays an important role in the longevity of prosthodontic restorations. The issues of comparative assessment of prosthetic constructions are complicated and not fully understood. The aim of this article is to review and present the current knowledge regarding the various technical, clinical, and molecular aspects of different prosthetic biomaterials and highlight the interactions between periodontal health and prosthetic restorations. Articles on periodontal health and fixed dental prostheses were searched using the keywords “zirconium”, “CAD/CAM”, “dental ceramics”, “metal–ceramics”, “margin fit”, “crown”, “fixed dental prostheses”, “periodontium”, and “margin gap” in PubMed/Medline, Scopus, Google Scholar, and Science Direct. Further search criteria included being published in English, and between January 1981 and September 2021. Then, relevant articles were selected, included, and critically analyzed in this review. The margin of discrepancy results in the enhanced accumulation of dental biofilm, microleakage, hypersensitivity, margin discoloration, increased gingival crevicular fluid flow (GCF), recurrent caries, pulp infection and, lastly, periodontal lesion and bone loss, which can lead to the failure of prosthetic treatment. Before starting prosthetic treatment, the condition of the periodontal tissues should be assessed for their oral hygiene status, and gingival and periodontal conditions. Zirconium-based restorations made from computer-aided design and computer-aided manufacturing (CAD/CAM) technology provide better results, in terms of marginal fit, inflammation reduction, maintenance, and the restoration of periodontal health and oral hygiene, compared to constructions made by conventional methods, and from other alloys. Compared to subgingival margins, supragingival margins offer better oral hygiene, which can be maintained and does not lead to secondary caries or periodontal disease.

Wear Resistance, Color Stability and Displacement Resistance of Milled PEEK Crowns Compared to Zirconia Crowns under Stimulated Chewing and High-Performance Aging

Recently, polyetheretherketone (PEEK) has been introduced to the dental market as a high-performance and chemically inert biomaterial. This study aimed to compare the wear resistance, abrasiveness, color stability, and displacement resistance of zirconia and PEEK milled crowns. An ideal tooth preparation of a first maxillary molar was done and scanned by an intraoral scanner to make a digital model. Then, the prosthetic crown was digitally designed on the CAD software, and the STL file was milled in zirconia (CaroZiir S, Carol Zircolite Pvt. Ltd., Gujarat, India) and PEEK (BioHpp, Bredent GmbH, Senden, Germany) crowns using five-axis CNC milling machines. The wear resistance, color stability, and displacement resistance of the milled monolithic zirconia with unfilled PEEK crowns using a chewing simulator with thermocyclic aging (120,000 cycles) were compared. The antagonist wear, material wear, color stability, and displacement were evaluated and compared among the groups using the Wilcoxon-Mann-Whitney U-test. Zirconia was shown to be three times more abrasive than PEEK (p value < 0.05). Zirconia had twice the wear resistance of PEEK (p value < 0.05). Zirconia was more color stable than PEEK (p value < 0.05). PEEK had more displacement resistance than zirconia (p value < 0.05). PEEK offers minimal abrasion, better stress modulation through plastic deformation, and good color stability, which make it a promising alternative to zirconia crown.

Effect of Biologically Oriented Preparation Technique on the Stress Concentration of Endodontically Treated Upper Central Incisor Restored with Zirconia Crown: 3D-FEA

The aim of this study was to evaluate the effect of biologically oriented preparation technique on the stress concentration of endodontically treated upper central incisors restored with zirconia crown (yttria-stabilized zirconia polycrystalline ceramic) through finite element analysis (FEA). Four models of maxillary central incisors containing enamel, dentin, periodontal ligament, cortical and medullary bone were created in CAD. Each model received a polymeric core-build up with nanofilled dental resin composite. The evaluated models were SM-preparation in shoulder 90°; CM-chamfer preparation; BOPT-biologically oriented preparation technique and BOPTB-BOPT preparation 1 mm below the cement-enamel junction. All models received zirconia crowns (5Y-TZP), fiberglass post and 1 mm ferrule. The models were imported into the analysis software with parameters for mechanical structural testing using the maximum principal stress and the tensile strength as the analysis criteria. Then, load of 150 N was applied at the cingulum with 45° slope to the long axis of the tooth, with the fixed base for each model. The type of marginal preparation affected the stresses concentration in endodontically treated teeth and in the zirconia crown margin. Considering the stress magnitude only, BOPT is a viable option for anterior monolithic zirconia crowns; however, with the highest stress magnitude at the restoration margin.

Diagnostic potential and future directions of matrix metalloproteinases as biomarkers in gingival crevicular fluid of oral and systemic diseases

Gingival crevicular fluid (GCF) is a physiological fluid and an inflammatory serum exudate derived from the gingival plexus of blood vessels and mixed with host tissues and subgingival plaque flows. In addition to proteins, GCF contains a diverse population of cells, including desquamated epithelial cells, cytokines, electrolytes, and bacteria from adjacent plaques. Recently, matrix metalloproteinases(MMPs), which are endopeptidases that are active against extracellular macromolecules, in GCF have been revealed as potential utility biomarkers for the diagnosis and follow-up of oral and systemic diseases, thereby facilitating the early evaluation of malignancy risk and the monitoring of disease progression and treatment response. Tissue inhibitors of metalloproteinases (TIMPs) are specific inhibitors of matrixins that participate in the regulation of local activities of MMPs in tissues. This review provides an overview of the latest findings on the diagnostic and prognostic values of MMPs and TIMPs in GCF of oral and systemic diseases, including periodontal disease, pulpitis, peri-implantitis and cardiovascular disease as well as the extraction, detection and analytical methods for GCF.

Association of subgingival Epstein-Barr virus and periodontitis

Background: The Epstein–Barr virus (EBV) is gaining interest as a possible agent in the etiology of periodontitis. Previous studies have shown controversy on whether EBV DNA in the subgingival periodontal pockets is associated with periodontitis. The present study aimed to seek the potential relationship between EBV and periodontitis.

Methods: Samples were taken from gingival crevicular fluid using sterile paper points, and data on sociodemographics, oral health, and periodontal health were recorded. This case-control study of 118 participants included 59 subjects with severe periodontitis and 59 control subjects with mild periodontitis. Quantitative real-time PCR was used to determined EBV load.

Results: EBV DNA was detected in 37.3% of the case samples and 18.6% of the control samples. There was no significant difference in a load of EBV DNA between severe and mild periodontitis (p>0.05). The observed load of EBV DNA was up to 4.55x10 ⁵ copies/mL. The detected EBV DNA was significantly associated with the plaque index and the oral hygiene index (p<0.05).

Conclusions: Although no significant association was found, EBV may play a role in periodontitis. The real-time PCR methods can be used to monitor the EBV load in gingival crevicular fluid.