1
|
Cai H, Chen Y. A Review of Print Heads for Fused Filament Fabrication of Continuous Carbon Fiber-Reinforced Composites. MICROMACHINES 2024; 15:432. [PMID: 38675244 PMCID: PMC11052248 DOI: 10.3390/mi15040432] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/27/2024] [Revised: 03/18/2024] [Accepted: 03/19/2024] [Indexed: 04/28/2024]
Abstract
The print head is one of the most critical components in an additive manufacturing (AM) system. It can significantly affect the quality of printed parts. Recently, because continuous carbon fiber-reinforced composites can have excellent mechanical properties, a relevant AM technique, fused filament fabrication (FFF), has been attracting increasing attention. This has extended the requirements demanded of print heads. To this end, different FFF extrusion methods have been rapidly developed based on various methods of impregnating fibers into the matrix for the corresponding print heads. Generally, these extrusion methods are of three types: single extrusion, in situ extrusion, and dual extrusion. All these methods face substantial challenges, such as the nozzle clogging and damage to the continuous carbon fibers during extrusion. These common issues still need to be fully addressed. This study's aim is to summarize and discuss the different extrusion methods and their FFF specific components in terms of their advantages and disadvantages for continuous carbon fiber-reinforced composites.
Collapse
Affiliation(s)
- Heng Cai
- Shenzhen Key Laboratory of Intelligent Manufacturing for Continuous Carbon Fiber Reinforced Composites, Southern University of Science and Technology, Shenzhen 518055, China;
- School of System Design and Intelligent Manufacturing (SDIM), Southern University of Science and Technology, Shenzhen 518055, China
| | - Yuan Chen
- Shenzhen Key Laboratory of Intelligent Manufacturing for Continuous Carbon Fiber Reinforced Composites, Southern University of Science and Technology, Shenzhen 518055, China;
- School of System Design and Intelligent Manufacturing (SDIM), Southern University of Science and Technology, Shenzhen 518055, China
| |
Collapse
|
2
|
Iftekar SF, Aabid A, Amir A, Baig M. Advancements and Limitations in 3D Printing Materials and Technologies: A Critical Review. Polymers (Basel) 2023; 15:polym15112519. [PMID: 37299318 DOI: 10.3390/polym15112519] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/22/2023] [Revised: 05/16/2023] [Accepted: 05/23/2023] [Indexed: 06/12/2023] Open
Abstract
3D printing has revolutionized various industries by enabling the production of complex designs and shapes. Recently, the potential of new materials in 3D printing has led to an exponential increase in the technology's applications. However, despite these advancements, the technology still faces significant challenges, including high costs, low printing speeds, limited part sizes, and strength. This paper critically reviews the recent trends in 3D printing technology, with a particular focus on the materials and their applications in the manufacturing industry. The paper highlights the need for further development of 3D printing technology to overcome its limitations. It also summarizes the research conducted by experts in this field, including their focuses, techniques, and limitations. By providing a comprehensive overview of the recent trends in 3D printing, this review aims to provide valuable insights into the technology's prospects.
Collapse
Affiliation(s)
- Syed Fouzan Iftekar
- Department of Manufacturing and Materials Engineering, Faculty of Engineering, International Islamic University Malaysia, P.O. Box 10, Kuala Lumpur 50725, Malaysia
| | - Abdul Aabid
- Department of Engineering Management, College of Engineering, Prince Sultan University, P.O. Box 66833, Riyadh 11586, Saudi Arabia
| | - Adibah Amir
- Department of Manufacturing and Materials Engineering, Faculty of Engineering, International Islamic University Malaysia, P.O. Box 10, Kuala Lumpur 50725, Malaysia
| | - Muneer Baig
- Department of Engineering Management, College of Engineering, Prince Sultan University, P.O. Box 66833, Riyadh 11586, Saudi Arabia
| |
Collapse
|
3
|
Experimental Analysis of Fiber Reinforcement Rings' Effect on Tensile and Flexural Properties of Onyx™-Kevlar ® Composites Manufactured by Continuous Fiber Reinforcement. Polymers (Basel) 2023; 15:polym15051252. [PMID: 36904492 PMCID: PMC10007063 DOI: 10.3390/polym15051252] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/31/2023] [Revised: 02/21/2023] [Accepted: 02/28/2023] [Indexed: 03/04/2023] Open
Abstract
Additive manufacturing of composite materials is progressing in the world of 3D printing technologies; composite materials allow the combination of the physical and mechanical properties of two or more constituents to create a new material that meets the required properties of several applications. In this research, the impact of adding Kevlar® reinforcement rings on the tensile and flexural properties of the Onyx™ (nylon with carbon fibers) matrix was analyzed. Parameters such as infill type, infill density and fiber volume percentage were controlled to determine the mechanical response in tensile and flexural tests of the additive manufactured composites. The tested composites showed an increment of four times the tensile modulus and 1.4 times the flexural modulus of pure Onyx™ matrix when compared with that of the Onyx™-Kevlar®. The experimental measurements demonstrated that Kevlar® reinforcement rings can increase the tensile and flexural modulus of Onyx™-Kevlar® composites using low fiber volume percentages (lower than 19% in both samples) and 50% of rectangular infill density. However, the appearance of some defects, such as delamination, was observed and should be further analyzed to obtain products that are errorless and can be reliable for real functions as in automotive or aeronautical industries.
Collapse
|
4
|
Savandaiah C, Sieberer S, Plank B, Maurer J, Steinbichler G, Sapkota J. Influence of Rapid Consolidation on Co-Extruded Additively Manufactured Composites. Polymers (Basel) 2022; 14:polym14091838. [PMID: 35567005 PMCID: PMC9100903 DOI: 10.3390/polym14091838] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/28/2022] [Revised: 04/19/2022] [Accepted: 04/25/2022] [Indexed: 02/01/2023] Open
Abstract
Composite filament co-extrusion (CFC) additive manufacturing (AM) is a bi-matrix rapid fabrication technique that is used to produce highly customisable composite parts. By this method, pre-cured, thermoset-based composite carbon fibre (CCF) is simultaneously extruded along with thermoplastic (TP) binding melt as the matrix. Like additive manufacturing, CFC technology also has inherent challenges which include voids, defects and a reduction in CCF’s volume in the fabricated parts. Nevertheless, CFC AM is an emerging composite processing technology, a highly customisable and user-oriented manufacturing unit. A new TP-based composites processing technique has the potential to be synergised with conventional processing techniques such as injection moulding to produce lightweight composite parts. Thus, CFC AM can be a credible technology to replace unsustainable subtractive manufacturing, if only the defects are minimised and processing reliability is achieved. The main objective of this research is to investigate and reduce internal voids and defects by utilising compression pressing as a rapid consolidation post-processing technique. Post-processing techniques are known to reduce the internal voids in AM-manufactured parts, depending on the TP matrices. Accordingly, the rapid consolidated neat polylactic acid (PLA) TP matrix showed the highest reduction in internal voids, approximately 92%. The PLA and polyamide 6 (PA6) binding matrix were reinforced with short carbon fibre (SCF) and long carbon fibre (LCF), respectively, to compensate for the CCF’s fibre volume reduction. An increase in tensile strength (ca. 12%) and modulus (ca. 30%) was observed in SCF-filled PLA. Furthermore, an approximately 53% increase in tensile strength and a 76% increase in modulus for LCF-reinforced PA6 as the binding matrix was observed. Similar trends were observed in CFC and rapidly consolidated CFC specimens’ flexural properties, resulting due to reduced internal voids.
Collapse
Affiliation(s)
- Chethan Savandaiah
- Bio-Based Composites and Processes, Wood K Plus-Kompetenzzentrum Holz GmbH, 4040 Linz, Austria
- Institute for Polymer Injection Moulding and Process Automation, Johannes Kepler University, 4040 Linz, Austria;
- Correspondence:
| | - Stefan Sieberer
- Institute of Structural Lightweight Design, Johannes Kepler University, 4040 Linz, Austria;
| | - Bernhard Plank
- Research Group Computed Tomography, University of Applied Sciences Upper Austria, 4600 Wels, Austria; (B.P.); (J.M.)
| | - Julia Maurer
- Research Group Computed Tomography, University of Applied Sciences Upper Austria, 4600 Wels, Austria; (B.P.); (J.M.)
| | - Georg Steinbichler
- Institute for Polymer Injection Moulding and Process Automation, Johannes Kepler University, 4040 Linz, Austria;
| | - Janak Sapkota
- Research Centre of Applied Science and Technology, Tribhuvan University, Kirtipur 44600, Nepal;
| |
Collapse
|
5
|
Borowski A, Vogel C, Behnisch T, Geske V, Gude M, Modler N. Additive Manufacturing-Based In Situ Consolidation of Continuous Carbon Fibre-Reinforced Polycarbonate. MATERIALS 2021; 14:ma14092450. [PMID: 34065095 PMCID: PMC8125998 DOI: 10.3390/ma14092450] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/29/2021] [Revised: 04/27/2021] [Accepted: 05/05/2021] [Indexed: 11/16/2022]
Abstract
Continuous carbon fibre-reinforced thermoplastic composites have convincing anisotropic properties, which can be used to strengthen structural components in a local, variable and efficient way. In this study, an additive manufacturing (AM) process is introduced to fabricate in situ consolidated continuous fibre-reinforced polycarbonate. Specimens with three different nozzle temperatures were in situ consolidated and tested in a three-point bending test. Computed tomography (CT) is used for a detailed analysis of the local material structure and resulting material porosity, thus the results can be put into context with process parameters. In addition, a highly curved test structure was fabricated that demonstrates the limits of the process and dependent fibre strand folding behaviours. These experimental investigations present the potential and the challenges of additive manufacturing-based in situ consolidated continuous fibre-reinforced polycarbonate.
Collapse
|
6
|
Development and Processing of Continuous Flax and Carbon Fiber-Reinforced Thermoplastic Composites by a Modified Material Extrusion Process. MATERIALS 2021; 14:ma14092332. [PMID: 33946263 PMCID: PMC8125781 DOI: 10.3390/ma14092332] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/31/2021] [Revised: 04/26/2021] [Accepted: 04/27/2021] [Indexed: 11/30/2022]
Abstract
Additive manufacturing, especially material extrusion (MEX), has received a lot of attention recently. The reasons for this are the numerous advantages compared to conventional manufacturing processes, which result in various new possibilities for product development and -design. By applying material layer by layer, parts with complex, load-path optimized geometries can be manufactured at neutral costs. To expand the application fields of MEX, high-strength and simultaneously lightweight materials are required which fulfill the requirements of highly resilient technical parts. For instance, the embedding of continuous carbon and flax fibers in a polymer matrix offers great potential for this. To achieve the highest possible variability with regard to the material combinations while ensuring simple and economical production, the fiber–matrix bonding should be carried out in one process step together with the actual parts manufacture. This paper deals with the adaptation and improvement of the 3D printer on the one hand and the characterization of 3D printed test specimens based on carbon and flax fibers on the other hand. For this purpose, the print head development for in-situ processing of contin uous fiber-reinforced parts with improved mechanical properties is described. It was determined that compared to neat polylactic acid (PLA), the continuous fiber-reinforced test specimens achieve up to 430% higher tensile strength and 890% higher tensile modulus for the carbon fiber reinforcement and an increase of up to 325% in tensile strength and 570% in tensile modulus for the flax fibers. Similar improvements in performance were achieved in the bending tests.
Collapse
|
7
|
Fused Filament Fabrication of Polymers and Continuous Fiber-Reinforced Polymer Composites: Advances in Structure Optimization and Health Monitoring. Polymers (Basel) 2021; 13:polym13050789. [PMID: 33806621 PMCID: PMC7961789 DOI: 10.3390/polym13050789] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/11/2021] [Revised: 02/26/2021] [Accepted: 02/26/2021] [Indexed: 02/07/2023] Open
Abstract
3D printed neat thermoplastic polymers (TPs) and continuous fiber-reinforced thermoplastic composites (CFRTPCs) by fused filament fabrication (FFF) are becoming attractive materials for numerous applications. However, the structure of these materials exhibits interfaces at different scales, engendering non-optimal mechanical properties. The first part of the review presents a description of these interfaces and highlights the different strategies to improve interfacial bonding. The actual knowledge on the structural aspects of the thermoplastic matrix is also summarized in this contribution with a focus on crystallization and orientation. The research to be tackled to further improve the structural properties of the 3D printed materials is identified. The second part of the review provides an overview of structural health monitoring technologies relying on the use of fiber Bragg grating sensors, strain gauge sensors and self-sensing. After a brief discussion on these three technologies, the needed research to further stimulate the development of FFF is identified. Finally, in the third part of this contribution the technology landscape of FFF processes for CFRTPCs is provided, including the future trends.
Collapse
|
8
|
Additive Manufacturing Processes in Medical Applications. MATERIALS 2021; 14:ma14010191. [PMID: 33401601 PMCID: PMC7796413 DOI: 10.3390/ma14010191] [Citation(s) in RCA: 84] [Impact Index Per Article: 28.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/26/2020] [Revised: 12/16/2020] [Accepted: 12/27/2020] [Indexed: 12/29/2022]
Abstract
Additive manufacturing (AM, 3D printing) is used in many fields and different industries. In the medical and dental field, every patient is unique and, therefore, AM has significant potential in personalized and customized solutions. This review explores what additive manufacturing processes and materials are utilized in medical and dental applications, especially focusing on processes that are less commonly used. The processes are categorized in ISO/ASTM process classes: powder bed fusion, material extrusion, VAT photopolymerization, material jetting, binder jetting, sheet lamination and directed energy deposition combined with classification of medical applications of AM. Based on the findings, it seems that directed energy deposition is utilized rarely only in implants and sheet lamination rarely for medical models or phantoms. Powder bed fusion, material extrusion and VAT photopolymerization are utilized in all categories. Material jetting is not used for implants and biomanufacturing, and binder jetting is not utilized for tools, instruments and parts for medical devices. The most common materials are thermoplastics, photopolymers and metals such as titanium alloys. If standard terminology of AM would be followed, this would allow a more systematic review of the utilization of different AM processes. Current development in binder jetting would allow more possibilities in the future.
Collapse
|
9
|
Farina I, Singh N, Colangelo F, Luciano R, Bonazzi G, Fraternali F. High-Performance Nylon-6 Sustainable Filaments for Additive Manufacturing. MATERIALS 2019; 12:ma12233955. [PMID: 31795290 PMCID: PMC6926620 DOI: 10.3390/ma12233955] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/29/2019] [Revised: 11/17/2019] [Accepted: 11/25/2019] [Indexed: 02/06/2023]
Abstract
This study deals with the development of Nylon-6 fused deposition modeling (FDM) filaments for additive manufacturing, which couples high mechanical performances with eco-sustainability. These filaments were extruded from recycled Nylon-6 granulates through a dedicated twin-screw extrusion line, which processes either pure Nylon-6 grains, or mixtures of such a material with minor fractions of acrylonitrile butadiene styrene (ABS) and titanium dioxide (TiO2). The rheological and thermal properties of the investigated filaments are analyzed, including melt flow index, melting temperature, and decomposition temperature, which are of the utmost importance when avoiding the overheating and decomposition of the material. Such a study is conducted in both pre-extrusion and post-extrusion conditions. The tensile strength, the wear resistance, and the printability of the examined recycled Nylon-6 filaments are also studied by comparing the properties of such filaments with those exhibited by different nylon-based filaments for FDM that are available in the market. The given results show that the recycling of Nylon-6 through the “caprolactam” regeneration route enables the newly formed material to retain high physical and mechanical properties, such as tensile strength at yield in the interval 55.79–86.91 MPa. Referring to the basic composition of the filaments examined in the present study, this remarkably high-yield strength is accompanied by a Young modulus of 1.64 GPa, and wear resistance of 92 µm, under a 15 min/1 kg load pin-on-disk test carried at the sliding speed of 250 rpm.
Collapse
Affiliation(s)
- Ilenia Farina
- Department of Engineering, University of Naples “Parthenope”, Centro Direzionale di Napoli, Isola C4, 80143 Naples, Italy; (I.F.); (F.C.); (R.L.)
| | - Narinder Singh
- Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II 132, 84084 Fisciano, SA, Italy;
| | - Francesco Colangelo
- Department of Engineering, University of Naples “Parthenope”, Centro Direzionale di Napoli, Isola C4, 80143 Naples, Italy; (I.F.); (F.C.); (R.L.)
| | - Raimondo Luciano
- Department of Engineering, University of Naples “Parthenope”, Centro Direzionale di Napoli, Isola C4, 80143 Naples, Italy; (I.F.); (F.C.); (R.L.)
| | - Giulio Bonazzi
- Aquafil s.p.a., via Linfano 9, 38062 Arco (Trento), Italy;
| | - Fernando Fraternali
- Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II 132, 84084 Fisciano, SA, Italy;
- Correspondence:
| |
Collapse
|
10
|
Development and Evaluation of Fall Impact Protection Pads Using Additive Manufacturing. MATERIALS 2019; 12:ma12203440. [PMID: 31640163 PMCID: PMC6829214 DOI: 10.3390/ma12203440] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/18/2019] [Revised: 10/17/2019] [Accepted: 10/18/2019] [Indexed: 01/17/2023]
Abstract
This paper presents the development and evaluation of fall-impact protection pants for elderly women using additive manufacturing. The protective pants were designed incorporating a protective pad in the hip area to reduce the impact of falls on the human body. The protective pad is a 3D mesh structure with a curved surface to fit the human body. Pads printed with flexible thermoplastic polyurethane were combined with foam to create the final pad. The impact-absorbing performance of the pad was verified through physical impact experiments. When dropping a bowling ball onto the protective pad from heights of 15, 20, and 25 cm, the protective pad was found to reduce the impact force by more than 82% in all cases. The impact force was less than the average fracture threshold of 3472 N. A subject group and an expert group evaluated the appearance, pad characteristics, motion functionality, and the wearability of the protection pants. Despite the insertion of a pad, the pants appeared natural and had a good fit. The pads were evaluated as being well-designed in terms of their position, shape, area, thickness, weight, flexibility, ease of insertion, and ease of use. Users were comfortable performing various motions when wearing the designed protective clothing. Therefore, this work can be considered to have developed protective clothing that provides satisfactory impact-protection performance and comfort thereby advancing the possibility of applying additive manufacturing to the creation of functional garments.
Collapse
|