A Prediction Model on Viscoelastic Fatigue Damage of Asphalt Mixture

A Design Method on Durable Asphalt Pavement of Flexible Base on Anti-Rutting Performance and Its Application

To solve the durability of flexible base asphalt pavement, especially its anti-rutting problem, a design method on durable asphalt pavement of flexible base on anti-rutting performance was put forward in the paper, based on many experiments and calculations. Firstly, a method that asphalt could be selected according to penetration and the anti-rutting factor of its base asphalt was found, which solved the problem of the asphalt selection of the flexible base asphalt mixture design. Meanwhile, a method of skeleton-density structure gradation design was proposed based on the fractal void ratio of coarse aggregate, fractal volume of fine aggregate in coarse aggregate, penetration, fractal dimension of gradation particle size, and rutting tests, which effectively solved in advance the rutting and fatigue performance of flexible base asphalt mixtures. Then, on the basis of the fatigue damage, a calculation method of fatigue life was suggested, which solved the problem that the fatigue damage of asphalt mixtures rarely considered the combined effects of creep damage and fatigue damage. In addition, a calculation method of rutting was formulated based on vehicle dynamic load and ANSYS 16.0 software. Lastly, the feasibility of the design method on durable asphalt pavement of flexible base on anti-rutting performance was verified combining with the real engineering of a supporting project and several numerical calculations and tests.

Evaluation of Linear Deformation and Unloading Stiffness Characteristics of Asphalt Mixtures Incorporating Various Aggregate Gradations

Optimum stiffness and linear deformation in the unloading phase are fundamental properties of asphalt mixtures required for the durability of flexible pavements. In this research, blends of six different aggregate gradations were used for two base course (BC) and four wearing course (WC) asphalt mixtures. Stability and indirect tensile strength of resulting asphalt mixtures were evaluated to relate to viscoelastic unloading deformation and resilient moduli (instantaneous (MRI) and total (MRT)) at 25 °C using a 40/50 binder for 0.1 and 0.3 s load durations. Results indicated that an increase in coarse aggregate proportion from 48 to 70% for BC has shown a 12% and 14% increase in MRT for 0.1 and 0.3 s load durations, respectively, and an increase in coarse aggregate proportion from 41 to 57.5% for WC has caused a 26% and 20% increase in MRI for 0.1 and 0.3 s load durations, respectively. The same coarse aggregate proportions showed an increase in linear viscoelastic deformation at 0.1 s load duration from 54.6 to 68.2% for WC and from 53.0 to 62.7% for BC, whereas for 0.3 s load duration linear viscoelastic deformation increased from 58.1 to 69.1% for WC and 64.3 to 69.2% for BC. The findings of this study will assist in the selection of aggregate gradations to be used in wearing and base course asphalt mixtures for pavement design, construction and maintenance.