Selected Methods and Applications of Anti-Friction and Anti-Wear Surface Texturing

Tool Wear Issues in Hot Forging of Steel

Steel forging tools are subjected to a number of tribological wear mechanisms depending on the geometry and surface of the tool and the flow of the material. Thus, there is no single general tribological wear mechanism, and only the predominant wear mechanisms in this case can be indicated. The problem has been known for years, but due to its complexity research on it is still relevant. In this study, the various wear mechanisms of hot work tools are analyzed on the basis of original research. Moreover, the influence of the micro- and macrostructure of the material and of its mechanical, physical, and technological characteristics on susceptibility to a given type of wear is considered. Adhesive wear, wear caused by plastic deformation, mechanical fatigue, thermal fatigue, the influence of hardness, heat treatment, and impact strength on tool wear and the mechanisms causing this wear are discussed in addition to tribological wear mechanisms such as abrasive wear. The influence of thermomechanical history and the characteristics of the tool material, including structural anisotropy, on the wear of these tools is indicated. The analysis of wear mechanisms performed will enable more precise definition of the principles of tool material selection and tool material condition for the hot forging of steel.

Surface Engineering Strategies to Enhance the In Situ Performance of Medical Devices Including Atomic Scale Engineering

Decades of intense scientific research investigations clearly suggest that only a subset of a large number of metals, ceramics, polymers, composites, and nanomaterials are suitable as biomaterials for a growing number of biomedical devices and biomedical uses. However, biomaterials are prone to microbial infection due to Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), Staphylococcus epidermidis (S. epidermidis), hepatitis, tuberculosis, human immunodeficiency virus (HIV), and many more. Hence, a range of surface engineering strategies are devised in order to achieve desired biocompatibility and antimicrobial performance in situ. Surface engineering strategies are a group of techniques that alter or modify the surface properties of the material in order to obtain a product with desired functionalities. There are two categories of surface engineering methods: conventional surface engineering methods (such as coating, bioactive coating, plasma spray coating, hydrothermal, lithography, shot peening, and electrophoretic deposition) and emerging surface engineering methods (laser treatment, robot laser treatment, electrospinning, electrospray, additive manufacturing, and radio frequency magnetron sputtering technique). Atomic-scale engineering, such as chemical vapor deposition, atomic layer etching, plasma immersion ion deposition, and atomic layer deposition, is a subsection of emerging technology that has demonstrated improved control and flexibility at finer length scales than compared to the conventional methods. With the advancements in technologies and the demand for even better control of biomaterial surfaces, research efforts in recent years are aimed at the atomic scale and molecular scale while incorporating functional agents in order to elicit optimal in situ performance. The functional agents include synthetic materials (monolithic ZnO, quaternary ammonium salts, silver nano-clusters, titanium dioxide, and graphene) and natural materials (chitosan, totarol, botanical extracts, and nisin). This review highlights the various strategies of surface engineering of biomaterial including their functional mechanism, applications, and shortcomings. Additionally, this review article emphasizes atomic scale engineering of biomaterials for fabricating antimicrobial biomaterials and explores their challenges.

The Effect of Surface Topography Feature Size Density and Distribution on the Results of a Data Processing and Parameters Calculation with a Comparison of Regular Methods

In this paper, the influence of occurrence of surface texture features on the values of surface topography parameters calculated after the application of various data processing techniques was presented. Different types of surface topographies were considered, as follows: cylinder liners, some with additionally burnished dimples, turned, ground, milled, laser-textured, composite, ceramic, or isotropic in general. The effects of feature size on the areal form removal, noise suppressions, or end-effect reducing in surface texture measurements were studied. The variations of the ISO 25178 standard surface topography parameters were taken into consideration in detail. It was assumed that some of the feature sizes, distributions, and densities have a substantial impact on the values of surface topography parameters calculated after applications of regular (commonly used) algorithms and procedures, defined as basic operations, provided for raw surface texture data obtained directly from the measurement process. In the end, some of the practical applications for receiving the relevant values of surface topography parameters were proposed.