1
|
Abdelzaher MA, Hamouda AS, El-Kattan IM. A comprehensive study on the fire resistance properties of ultra-fine ceramic waste-filled high alkaline white cement paste composites for progressing towards sustainability. Sci Rep 2023; 13:22097. [PMID: 38092850 PMCID: PMC10719285 DOI: 10.1038/s41598-023-49229-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/20/2023] [Accepted: 12/05/2023] [Indexed: 12/17/2023] Open
Abstract
The most practical sustainable development options to safeguard the local ecology involve reducing the use of raw materials and guaranteeing proper recycling of the principal destroyed solid wastes. Preventing the creation of hazardous waste and the subsequent pollution that results from improper disposal is a top priority. Based on this, the study's authors recommend reusing the ultra-fine ceramic shards (CW). High-alkaline white cement (WC) has been partially replaced by ultra-fine CW because it is a cheaper, more abundant, and more lasting environmental material used in the production of trendy blended white cement pastes composites. In this context, we look at ultra-fine CW, a material that has been suggested for use as a hydraulic filler due to its high performance, physicomechanical qualities, and durability. XRF, XRD, FTIR, and SEM measurements are used to characterize the microstructure, thermal characteristics, and thermodynamics. Because of the effect of ultra-fine ceramic waste, the firing test reduces the mechanical strength by default, but with active filler, decreases slowly and increase its physicomechanical features and compressive strength compared to the control sample (WC), setting a new benchmark. The maximum amount of crystallization formed in the presence of ultra-fine ceramic waste in WC-matrix, resulting in a decrease in total porosity and early cracking. Together, the improved workability and energy-saving features of cement blends with ultra-fine ceramic waste, reflect their economic and environmental benefits, which may reduce building costs and boost the durability of the raw materials used in the mix.
Collapse
Affiliation(s)
- M A Abdelzaher
- Environmental Science and Industrial Development Department, Faculty of Postgraduate Studies for Advanced Sciences, Beni-Suef University, Beni-Suef, 62511, Egypt.
| | - Asmaa S Hamouda
- Environmental Science and Industrial Development Department, Faculty of Postgraduate Studies for Advanced Sciences, Beni-Suef University, Beni-Suef, 62511, Egypt
| | - Ibrahim M El-Kattan
- Environmental Science and Industrial Development Department, Faculty of Postgraduate Studies for Advanced Sciences, Beni-Suef University, Beni-Suef, 62511, Egypt
| |
Collapse
|
2
|
Ulewicz M. Recycled Materials in Civil Engineering Application. MATERIALS (BASEL, SWITZERLAND) 2023; 16:7075. [PMID: 38005005 PMCID: PMC10672505 DOI: 10.3390/ma16227075] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/02/2023] [Accepted: 11/03/2023] [Indexed: 11/26/2023]
Abstract
In recent years, the construction sector has shown great interest in the use of various by-products and industrial waste, as well as the consumer products used [...].
Collapse
Affiliation(s)
- Malgorzata Ulewicz
- Faculty of Civil Engineering, Czestochowa University of Technology, Dabrowskiego 69 Street, 42-201 Czestochowa, Poland
| |
Collapse
|
3
|
Alabsy MT, Gouda MM, Abbas MI, Al-Balawi SM, El-Khatib AM. Enhancing the Gamma-Radiation-Shielding Properties of Gypsum-Lime-Waste Marble Mortars by Incorporating Micro- and Nano-PbO Particles. MATERIALS (BASEL, SWITZERLAND) 2023; 16:1577. [PMID: 36837205 PMCID: PMC9966484 DOI: 10.3390/ma16041577] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/30/2022] [Revised: 01/26/2023] [Accepted: 02/06/2023] [Indexed: 06/18/2023]
Abstract
In the current study, the gamma-radiation-shielding characteristics of novel gypsum-lime-waste marble-based mortars reinforced with micro-PbO and nano-PbO powders were investigated. In total, seven mortar groups, including a control mortar (named GLM), were prepared. The other groups contained10, 20, and 30 wt.% of both micro-PbO and nano-PbO as a waste marble replacement. This study aimed to explore the effect of particle size and concentrations of PbO powders on the γ-ray-shielding capability of GLM mortars. For this purpose, an HPGe detector and five standard radioactive point sources (241Am, 133Ba, 137Cs, 60Co, and 152Eu) were employed to measure different shielding parameters, including the linear attenuation coefficient (μ), mass attenuation coefficient (μm), mean free path (MFP), half-value layer (HVL), and tenth-value layer (TVL), for the prepared samples in the energy range between 59.53 keV to 1408.01 keV. On the basis of μm values, other significant shielding parameters such as effective atomic number (Zeff), effective electron density (Neff), equivalent atomic number (Zeq), and exposure buildup factor (EBF) were also computed to explore the potential usage of the proposed mortars as radiation protective materials. The results reported that the smallest HVL, TVL, and MPF, as well as the largest attenuation values, were obtained for mortars reinforced by nano-PbO compared to those containing micro-PbO. It can be concluded from the results that the mortar samples containing nano-PbO had a remarkably improved gamma-radiation-shielding ability. Thus, these mortars can be used for radiation shielding on walls in nuclear facilities to reduce the transmitted radiation dose.
Collapse
|
4
|
Amin MN, Alkadhim HA, Ahmad W, Khan K, Alabduljabbar H, Mohamed A. Experimental and machine learning approaches to investigate the effect of waste glass powder on the flexural strength of cement mortar. PLoS One 2023; 18:e0280761. [PMID: 36689541 PMCID: PMC9870140 DOI: 10.1371/journal.pone.0280761] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/22/2022] [Accepted: 01/06/2023] [Indexed: 01/24/2023] Open
Abstract
Using solid waste in building materials is an efficient approach to achieving sustainability goals. Also, the application of modern methods like artificial intelligence is gaining attention. In this regard, the flexural strength (FS) of cementitious composites (CCs) incorporating waste glass powder (WGP) was evaluated via both experimental and machine learning (ML) methods. WGP was utilized to partially substitute cement and fine aggregate separately at replacement levels of 0%, 2.5%, 5%, 7.5%, 10%, 12.5%, and 15%. At first, the FS of WGP-based CCs was determined experimentally. The generated data, which included six inputs, was then used to run ML techniques to forecast the FS. For FS estimation, two ML approaches were used, including a support vector machine and a bagging regressor. The effectiveness of ML models was assessed by the coefficient of determination (R2), k-fold techniques, statistical tests, and examining the variation amongst experimental and forecasted FS. The use of WGP improved the FS of CCs, as determined by the experimental results. The highest FS was obtained when 10% and 15% WGP was utilized as a cement and fine aggregate replacement, respectively. The modeling approaches' results revealed that the support vector machine method had a fair level of accuracy, but the bagging regressor method had a greater level of accuracy in estimating the FS. Using ML strategies will benefit the building industry by expediting cost-effective and rapid solutions for analyzing material characteristics.
Collapse
Affiliation(s)
- Muhammad Nasir Amin
- Department of Civil and Environmental Engineering, College of Engineering, King Faisal University, Al-Ahsa, Saudi Arabia
| | - Hassan Ali Alkadhim
- Department of Civil and Environmental Engineering, College of Engineering, King Faisal University, Al-Ahsa, Saudi Arabia
| | - Waqas Ahmad
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad, Pakistan
| | - Kaffayatullah Khan
- Department of Civil and Environmental Engineering, College of Engineering, King Faisal University, Al-Ahsa, Saudi Arabia
| | - Hisham Alabduljabbar
- Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, Saudi Arabia
| | | |
Collapse
|
5
|
Alfaiad MA, Khan K, Ahmad W, Amin MN, Deifalla AF, A Ghamry N. Evaluating the compressive strength of glass powder-based cement mortar subjected to the acidic environment using testing and modeling approaches. PLoS One 2023; 18:e0284761. [PMID: 37093880 PMCID: PMC10124891 DOI: 10.1371/journal.pone.0284761] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/19/2023] [Accepted: 04/08/2023] [Indexed: 04/25/2023] Open
Abstract
This study conducted experimental and machine learning (ML) modeling approaches to investigate the impact of using recycled glass powder in cement mortar in an acidic environment. Mortar samples were prepared by partially replacing cement and sand with glass powder at various percentages (from 0% to 15%, in 2.5% increments), which were immersed in a 5% sulphuric acid solution. Compressive strength (CS) tests were conducted before and after the acid attack for each mix. To create ML-based prediction models, such as bagging regressor and random forest, for the CS prediction following the acid attack, the dataset produced through testing methods was utilized. The test results indicated that the CS loss of the cement mortar might be reduced by utilizing glass powder. For maximum resistance to acidic conditions, the optimum proportion of glass powder was noted to be 10% as cement, which restricted the CS loss to 5.54%, and 15% as a sand replacement, which restricted the CS loss to 4.48%, compared to the same mix poured in plain water. The built ML models also agreed well with the test findings and could be utilized to calculate the CS of cementitious composites incorporating glass powder after the acid attack. On the basis of the R2 value (random forest: 0.97 and bagging regressor: 0.96), the variance between tests and forecasted results, and errors assessment, it was found that the performance of both the bagging regressor and random forest models was similarly accurate.
Collapse
Affiliation(s)
- Majdi Ameen Alfaiad
- Department of Chemical Engineering, College of Engineering, King Faisal University, Al-Ahsa, Saudi Arabia
| | - Kaffayatullah Khan
- Department of Civil and Environmental Engineering, College of Engineering, King Faisal University, Al-Ahsa, Saudi Arabia
| | - Waqas Ahmad
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad, Pakistan
| | - Muhammad Nasir Amin
- Department of Civil and Environmental Engineering, College of Engineering, King Faisal University, Al-Ahsa, Saudi Arabia
| | - Ahmed Farouk Deifalla
- Department of Structural Engineering and Construction Management, Future University in Egypt, New Cairo City, Egypt
| | - Nivin A Ghamry
- Faculty of Computers and Artificial Intelligence, Cairo University, Giza, Egypt
| |
Collapse
|
6
|
Alkadhim HA, Amin MN, Ahmad W, Khan K, Nazar S, Faraz MI, Imran M. Evaluating the Strength and Impact of Raw Ingredients of Cement Mortar Incorporating Waste Glass Powder Using Machine Learning and SHapley Additive ExPlanations (SHAP) Methods. MATERIALS (BASEL, SWITZERLAND) 2022; 15:ma15207344. [PMID: 36295407 PMCID: PMC9609276 DOI: 10.3390/ma15207344] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/22/2022] [Revised: 10/11/2022] [Accepted: 10/18/2022] [Indexed: 05/05/2023]
Abstract
This research employed machine learning (ML) and SHapley Additive ExPlanations (SHAP) methods to assess the strength and impact of raw ingredients of cement mortar (CM) incorporated with waste glass powder (WGP). The data required for this study were generated using an experimental approach. Two ML methods were employed, i.e., gradient boosting and random forest, for compressive strength (CS) and flexural strength (FS) estimation. The performance of ML approaches was evaluated by comparing the coefficient of determination (R2), statistical checks, k-fold assessment, and analyzing the variation between experimental and estimated strength. The results of the ML-based modeling approaches revealed that the gradient boosting model had a good degree of precision, but the random forest model predicted the strength of the WGP-based CM with a greater degree of precision for CS and FS prediction. The SHAP analysis revealed that fine aggregate was a critical raw material, with a stronger negative link to the strength of the material, whereas WGP and cement had a greater positive effect on the strength of CM. Utilizing such approaches will benefit the building sector by supporting the progress of rapid and inexpensive approaches for identifying material attributes and the impact of raw ingredients.
Collapse
Affiliation(s)
- Hassan Ali Alkadhim
- Department of Civil and Environmental Engineering, College of Engineering, King Faisal University, Al-Ahsa 31982, Saudi Arabia
| | - Muhammad Nasir Amin
- Department of Civil and Environmental Engineering, College of Engineering, King Faisal University, Al-Ahsa 31982, Saudi Arabia
- Correspondence: ; Tel.: +966-13-589-5431; Fax: +966-13-581-7068
| | - Waqas Ahmad
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad 22060, Pakistan
| | - Kaffayatullah Khan
- Department of Civil and Environmental Engineering, College of Engineering, King Faisal University, Al-Ahsa 31982, Saudi Arabia
| | - Sohaib Nazar
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad 22060, Pakistan
| | - Muhammad Iftikhar Faraz
- Department of Mechanical Engineering, College of Engineering, King Faisal University, Al-Ahsa 31982, Saudi Arabia
| | - Muhammad Imran
- School of Civil and Environmental Engineering (SCEE), National University of Sciences & Technology (NUST), Islamabad 44000, Pakistan
| |
Collapse
|
7
|
Guo K, Ding Q. Effect of Shale Powder on the Performance of Lightweight Ultra-High-Performance Concrete. MATERIALS (BASEL, SWITZERLAND) 2022; 15:7225. [PMID: 36295291 PMCID: PMC9609475 DOI: 10.3390/ma15207225] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/22/2022] [Revised: 10/05/2022] [Accepted: 10/13/2022] [Indexed: 06/16/2023]
Abstract
In this study, lightweight ultra-high-performance concrete (L-UHPC) was prepared by using SP to replace part of the cement. The main study investigated the effect of the amount of SP on the spread diameter, apparent density and mechanical properties of L-UHPC. The mechanism of the effect of SP on the hydration product of L-UHPC was studied and the pore structure of L-UHPC was also analyzed. The results show that the incorporation of SP can effectively improve the spread diameter and reduce the apparent density of L-UHPC to a certain extent. With the increase in SP content, the compressive strength of L-UHPC at 7 days of age did not change significantly. However, the compressive strengths at 3 and 28 days of age changed significantly. When the amount of SP was less than 12%, there was no significant decrease flexural and compressive strength at 28 days of age. However, the flexural and compressive strength of L-UHPC gradually decreased when the amount of SP was greater than 12%. The microstructure shows that SP can reduce the content of portlandite. This is mainly due to the fact that the addition of SP improved the stacking compactness of L-UHPC and promoted secondary hydration reactions. The content of portlandite and the hydration degree of cement were reduced. At the same time, the exothermic hydration of L-UHPC with SP was less, the hydration process was slow, and the exothermic rate of initial hydration was low. An appropriate amount of SP can effectively improve the pore structure of L-UHPC and significantly reduce the pore volume of harmful pores (50~200 nm). SP can make the L-UHPC structure more compact and has a positive effect on the development of L-UHPC strength.
Collapse
|
8
|
Application of Ensemble Machine Learning Methods to Estimate the Compressive Strength of Fiber-Reinforced Nano-Silica Modified Concrete. Polymers (Basel) 2022; 14:polym14183906. [PMID: 36146051 PMCID: PMC9506242 DOI: 10.3390/polym14183906] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/09/2022] [Revised: 08/19/2022] [Accepted: 08/20/2022] [Indexed: 11/17/2022] Open
Abstract
In this study, compressive strength (CS) of fiber-reinforced nano-silica concrete (FRNSC) was anticipated using ensemble machine learning (ML) approaches. Four types of ensemble ML methods were employed, including gradient boosting, random forest, bagging regressor, and AdaBoost regressor, to achieve the study’s aims. The validity of employed models was tested and compared using the statistical tests, coefficient of determination (R2), and k-fold method. Moreover, a Shapley Additive Explanations (SHAP) analysis was used to observe the interaction and effect of input parameters on the CS of FRNSC. Six input features, including fiber volume, coarse aggregate to fine aggregate ratio, water to binder ratio, nano-silica, superplasticizer to binder ratio, and specimen age, were used for modeling. In predicting the CS of FRNSC, it was observed that gradient boosting was the model of lower accuracy and the AdaBoost regressor had the highest precision in forecasting the CS of FRNSC. However, the performance of random forest and the bagging regressor was also comparable to that of the AdaBoost regressor model. The R2 for the gradient boosting, random forest, bagging regressor, and AdaBoost regressor models were 0.82, 0.91, 0.91, and 0.92, respectively. Also, the error values of the models further validated the exactness of the ML methods. The average error values for the gradient boosting, random forest, bagging regressor, and AdaBoost regressor models were 5.92, 4.38, 4.24, and 3.73 MPa, respectively. SHAP study discovered that the coarse aggregate to fine aggregate ratio shows a greater negative correlation with FRNSC’s CS. However, specimen age affects FRNSC CS positively. Nano-silica, fiber volume, and the ratio of superplasticizer to binder have both positive and deleterious effects on the CS of FRNSC. Employing these methods will promote the building sector by presenting fast and economical methods for calculating material properties and the impact of raw ingredients.
Collapse
|
9
|
Assessment of Artificial Intelligence Strategies to Estimate the Strength of Geopolymer Composites and Influence of Input Parameters. Polymers (Basel) 2022; 14:polym14122509. [PMID: 35746085 PMCID: PMC9231083 DOI: 10.3390/polym14122509] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/14/2022] [Revised: 06/07/2022] [Accepted: 06/15/2022] [Indexed: 12/25/2022] Open
Abstract
Geopolymers might be the superlative alternative to conventional cement because it is produced from aluminosilicate-rich waste sources to eliminate the issues associated with its manufacture and use. Geopolymer composites (GPCs) are gaining popularity, and their research is expanding. However, casting, curing, and testing specimens requires significant effort, price, and time. For research to be efficient, it is essential to apply novel approaches to the said objective. In this study, compressive strength (CS) of GPCs was anticipated using machine learning (ML) approaches, i.e., one single method (support vector machine (SVM)) and two ensembled algorithms (gradient boosting (GB) and extreme gradient boosting (XGB)). All models' validity and comparability were tested using the coefficient of determination (R2), statistical tests, and k-fold analysis. In addition, a model-independent post hoc approach known as SHapley Additive exPlanations (SHAP) was employed to investigate the impact of input factors on the CS of GPCs. In predicting the CS of GPCs, it was observed that ensembled ML strategies performed better than the single ML technique. The R2 for the SVM, GB, and XGB models were 0.98, 0.97, and 0.93, respectively. The lowered error values of the models, including mean absolute and root mean square errors, further verified the enhanced precision of the ensembled ML approaches. The SHAP analysis revealed a stronger positive correlation between GGBS and GPC's CS. The effects of NaOH molarity, NaOH, and Na2SiO3 were also observed as more positive. Fly ash and gravel size: 10/20 mm have both beneficial and negative impacts on the GPC's CS. Raising the concentration of these ingredients enhances the CS, whereas increasing the concentration of GPC reduces it. Gravel size: 4/10 mm has less favorable and more negative effects. ML techniques will benefit the construction sector by offering rapid and cost-efficient solutions for assessing material characteristics.
Collapse
|
10
|
Split Tensile Strength Prediction of Recycled Aggregate-Based Sustainable Concrete Using Artificial Intelligence Methods. MATERIALS 2022; 15:ma15124296. [PMID: 35744356 PMCID: PMC9229664 DOI: 10.3390/ma15124296] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/25/2022] [Revised: 06/08/2022] [Accepted: 06/16/2022] [Indexed: 02/04/2023]
Abstract
Sustainable concrete is gaining in popularity as a result of research into waste materials, such as recycled aggregate (RA). This strategy not only protects the environment, but also meets the demand for concrete materials. Using advanced artificial intelligence (AI) approaches, this study anticipates the split tensile strength (STS) of concrete samples incorporating RA. Three machine-learning techniques, artificial neural network (ANN), decision tree (DT), and random forest (RF), were examined for the specified database. The results suggest that the RF model shows high precision compared with the DT and ANN models at predicting the STS of RA-based concrete. The high value of the coefficient of determination and the low error values of the mean absolute error (MAE), mean square error (MSE), and root mean square error (RMSE) provided significant evidence for the accuracy and precision of the RF model. Furthermore, statistical tests and the k-fold cross-validation technique were used to validate the models. The importance of the input parameters and their contribution levels was also investigated using sensitivity analysis and SHAP analysis.
Collapse
|
11
|
Assessment of Limestone Waste Addition for Fired Clay Bricks. MATERIALS 2022; 15:ma15124263. [PMID: 35744322 PMCID: PMC9229666 DOI: 10.3390/ma15124263] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/17/2022] [Revised: 06/12/2022] [Accepted: 06/13/2022] [Indexed: 11/17/2022]
Abstract
Our aim was to investigate the feasibility of using limestone waste resulting from stone processing for the manufacturing of fired clay bricks. Waste materials were considered as a partial replacement for clays to reduce the exploitation of natural resources and as a response to the climate neutrality commitments. The samples were prepared to have a waste content of up to 15% and were fired at a temperature of 900 °C. The chemical and mineralogical composition and the physical analysis of raw materials were investigated by using SEM–EDS and XRD diffraction. The result showed an increase in CaO in the clay mixture due to the presence of limestone, which reduced the shrinkage of the products’ compressive strength, up to 55% for samples with a higher content of limestone (15 wt.%), and influenced the samples’ color by making them lighter than the reference sample.
Collapse
|
12
|
Amin MN, Khan K, Ahmad W, Javed MF, Qureshi HJ, Saleem MU, Qadir MG, Faraz MI. Compressive Strength Estimation of Geopolymer Composites through Novel Computational Approaches. Polymers (Basel) 2022; 14:polym14102128. [PMID: 35632011 PMCID: PMC9147713 DOI: 10.3390/polym14102128] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/29/2022] [Revised: 05/11/2022] [Accepted: 05/18/2022] [Indexed: 12/18/2022] Open
Abstract
The application of artificial intelligence approaches like machine learning (ML) to forecast material properties is an effective strategy to reduce multiple trials during experimentation. This study performed ML modeling on 481 mixes of geopolymer concrete with nine input variables, including curing time, curing temperature, specimen age, alkali/fly ash ratio, Na2SiO3/NaOH ratio, NaOH molarity, aggregate volume, superplasticizer, and water, with CS as the output variable. Four types of ML models were employed to anticipate the compressive strength of geopolymer concrete, and their performance was compared to find out the most accurate ML model. Two individual ML techniques, support vector machine and multi-layer perceptron neural network, and two ensembled ML methods, AdaBoost regressor and random forest, were employed to achieve the study’s aims. The performance of all models was confirmed using statistical analysis, k-fold evaluation, and correlation coefficient (R2). Moreover, the divergence of the estimated outcomes from those of the experimental results was noted to check the accuracy of the models. It was discovered that ensembled ML models estimated the compressive strength of the geopolymer concrete with higher precision than individual ML models, with random forest having the highest accuracy. Using these computational strategies will accelerate the application of construction materials by decreasing the experimental efforts.
Collapse
Affiliation(s)
- Muhammad Nasir Amin
- Department of Civil and Environmental Engineering, College of Engineering, King Faisal University, Al-Ahsa 31982, Saudi Arabia; (K.K.); (H.J.Q.)
- Correspondence: ; Tel.: +966-13-589-5431; Fax: +966-13-581-7068
| | - Kaffayatullah Khan
- Department of Civil and Environmental Engineering, College of Engineering, King Faisal University, Al-Ahsa 31982, Saudi Arabia; (K.K.); (H.J.Q.)
| | - Waqas Ahmad
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad 22060, Pakistan; (W.A.); (M.F.J.)
| | - Muhammad Faisal Javed
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad 22060, Pakistan; (W.A.); (M.F.J.)
| | - Hisham Jahangir Qureshi
- Department of Civil and Environmental Engineering, College of Engineering, King Faisal University, Al-Ahsa 31982, Saudi Arabia; (K.K.); (H.J.Q.)
| | | | - Muhammad Ghulam Qadir
- Department of Environmental Sciences, COMSATS University Islamabad, Abbottabad 22060, Pakistan;
| | - Muhammad Iftikhar Faraz
- Department of Mechanical Engineering, College of Engineering, King Faisal University, Al-Ahsa 31982, Saudi Arabia;
| |
Collapse
|
13
|
Khan K, Ahmad W, Amin MN, Aslam F, Ahmad A, Al-Faiad MA. Comparison of Prediction Models Based on Machine Learning for the Compressive Strength Estimation of Recycled Aggregate Concrete. MATERIALS 2022; 15:ma15103430. [PMID: 35629456 PMCID: PMC9147385 DOI: 10.3390/ma15103430] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/05/2022] [Revised: 04/25/2022] [Accepted: 04/27/2022] [Indexed: 01/24/2023]
Abstract
Numerous tests are used to determine the performance of concrete, but compressive strength (CS) is usually regarded as the most important. The recycled aggregate concrete (RAC) exhibits lower CS compared to natural aggregate concrete. Several variables, such as the water-cement ratio, the strength of the parent concrete, recycled aggregate replacement ratio, density, and water absorption of recycled aggregate, all impact the RAC’s CS. Many studies have been carried out to ascertain the influence of each of these elements separately. However, it is difficult to investigate their combined effect on the CS of RAC experimentally. Experimental investigations entail casting, curing, and testing samples, which require considerable work, expense, and time. It is vital to adopt novel methods to the stated aim in order to conduct research quickly and efficiently. The CS of RAC was predicted in this research utilizing machine learning techniques like decision tree, gradient boosting, and bagging regressor. The data set included eight input variables, and their effect on the CS of RAC was evaluated. Coefficient correlation (R2), the variance between predicted and experimental outcomes, statistical checks, and k-fold evaluations, were carried out to validate and compare the models. With an R2 of 0.92, the bagging regressor technique surpassed the decision tree and gradient boosting in predicting the strength of RAC. The statistical assessments also validated the superior accuracy of the bagging regressor model, yielding lower error values like mean absolute error (MAE) and root mean square error (RMSE). MAE and RMSE values for the bagging model were 4.258 and 5.693, respectively, which were lower than the other techniques employed, i.e., gradient boosting (MAE = 4.956 and RMSE = 7.046) and decision tree (MAE = 6.389 and RMSE = 8.952). Hence, the bagging regressor is the best suitable technique to predict the CS of RAC.
Collapse
Affiliation(s)
- Kaffayatullah Khan
- Department of Civil and Environmental Engineering, College of Engineering, King Faisal University, Al-Ahsa 31982, Saudi Arabia;
- Correspondence:
| | - Waqas Ahmad
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad 22060, Pakistan;
| | - Muhammad Nasir Amin
- Department of Civil and Environmental Engineering, College of Engineering, King Faisal University, Al-Ahsa 31982, Saudi Arabia;
| | - Fahid Aslam
- Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia;
| | - Ayaz Ahmad
- MaREI Centre, Ryan Institute and School of Engineering, College of Science and Engineering, National University of Ireland Galway, H91 HX31 Galway, Ireland;
| | - Majdi Adel Al-Faiad
- Department of Chemical Engineering, College of Engineering, King Faisal University, Al-Ahsa 31982, Saudi Arabia;
| |
Collapse
|
14
|
Effect of Marble Waste Powder as a Binder Replacement on the Mechanical Resistance of Cement Mortars. APPLIED SCIENCES-BASEL 2022. [DOI: 10.3390/app12094481] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
The quarrying of marble and its processing to produce building materials often generates a negative impact on the environment. In the Apuan Alps marble district, a renowned quarrying area in Italy since ancient times, the aquatic pollution of water bodies, caused by the presence of marble waste in the form of powder or sludge, represents a significant and current environmental problem. Depending on the different national and international regulations on waste management, the marble waste can be classified as a special non-hazardous industrial waste. If marble waste has been managed according to environmental international and national laws, it can be reused as a by-product. For this, the present work aims to evaluate the reuse of marble waste as a material in replacement for cement for producing mortars. Subsequently, the mechanical and physical tests were carried out to evaluate the specific properties of the obtained materials during and after the curing time. The results showed that replacement of cement into mortars by marble waste always causes a decrease of mechanical properties, with still acceptable values for many applications up to a substitution of less than 25%. From the collected data, the use of marble waste in the production of cement mortars represents an adequate and sustainable destination of this by-product.
Collapse
|
15
|
Zou Y, Zheng C, Alzahrani AM, Ahmad W, Ahmad A, Mohamed AM, Khallaf R, Elattar S. Evaluation of Artificial Intelligence Methods to Estimate the Compressive Strength of Geopolymers. Gels 2022; 8:gels8050271. [PMID: 35621569 PMCID: PMC9140756 DOI: 10.3390/gels8050271] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/02/2022] [Revised: 04/12/2022] [Accepted: 04/19/2022] [Indexed: 02/04/2023] Open
Abstract
The depletion of natural resources and greenhouse gas emissions related to the manufacture and use of ordinary Portland cement (OPC) pose serious concerns to the environment and human life. The present research focuses on using alternative binders to replace OPC. Geopolymer might be the best option because it requires waste materials enriched in aluminosilicate for its production. The research on geopolymer concrete (GPC) is growing rapidly. However, substantial effort and expenses are required to cast specimens, cures, and tests. Applying novel techniques for the said purpose is the key requirement for rapid and cost-effective research. In this research, supervised machine learning (SML) techniques, including two individual (decision tree (DT) and gene expression programming (GEP)) and two ensembled (bagging regressor (BR) and random forest (RF)) algorithms were employed to estimate the compressive strength (CS) of GPC. The validity and comparison of all the models were made using the coefficient of determination (R2), k-fold, and statistical assessments. It was noticed that the ensembled SML techniques performed better than the individual SML techniques in forecasting the CS of GPC. However, individual SML model results were also in the reasonable range. The R2 value for BR, RF, GEP, and DT models was 0.96, 0.95, 0.93, and 0.88, respectively. The models’ lower error values such as mean absolute error (MAE) and root mean square errors (RMSE) also verified the higher precision of ensemble SML methods. The RF (MAE = 2.585 MPa, RMSE = 3.702 MPa) and BR (MAE = 2.044 MPa, RMSE = 3.180) results are better than the DT (MAE = 4.136 MPa, RMSE = 6.256 MPa) and GEP (MAE = 3.102 MPa, RMSE = 4.049 MPa). The application of SML techniques will benefit the construction sector with fast and cost-effective methods for estimating the properties of materials.
Collapse
Affiliation(s)
- Yong Zou
- School of Civil Engineering, Wuhan University, Wuhan 430072, China
- Correspondence: (Y.Z.); (W.A.)
| | - Chao Zheng
- Department of Civil and Environmental Engineering, University of Texas at San Antonio, San Antonio, TX 78249, USA;
| | - Abdullah Mossa Alzahrani
- Department of Civil Engineering, College of Engineering, Taif University, P.O. Box 11099, Taif 21944, Saudi Arabia;
| | - Waqas Ahmad
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad 22060, Pakistan;
- Correspondence: (Y.Z.); (W.A.)
| | - Ayaz Ahmad
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad 22060, Pakistan;
- MaREI Centre, Ryan Institute and School of Engineering, College of Science and Engineering, National University of Ireland Galway, H91 HX31 Galway, Ireland
| | - Abdeliazim Mustafa Mohamed
- Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia;
- Building & Construction Technology Department, Bayan College of Science and Technology, Khartoum 210, Sudan
| | - Rana Khallaf
- Structural Engineering and Construction Management Department, Faculty of Engineering and Technology, Future University in Egypt, New Cairo 11845, Egypt;
| | - Samia Elattar
- Department of Industrial & Systems Engineering, College of Engineering, Princess Nourah bint Abdulrahman University, P.O. Box 84428, Riyadh 11671, Saudi Arabia;
| |
Collapse
|
16
|
Machine Learning Prediction Models to Evaluate the Strength of Recycled Aggregate Concrete. MATERIALS 2022; 15:ma15082823. [PMID: 35454516 PMCID: PMC9025364 DOI: 10.3390/ma15082823] [Citation(s) in RCA: 17] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/04/2022] [Revised: 03/25/2022] [Accepted: 03/27/2022] [Indexed: 11/20/2022]
Abstract
Compressive and flexural strength are the crucial properties of a material. The strength of recycled aggregate concrete (RAC) is comparatively lower than that of natural aggregate concrete. Several factors, including the recycled aggregate replacement ratio, parent concrete strength, water–cement ratio, water absorption, density of the recycled aggregate, etc., affect the RAC’s strength. Several studies have been performed to study the impact of these factors individually. However, it is challenging to examine their combined impact on the strength of RAC through experimental investigations. Experimental studies involve casting, curing, and testing samples, for which substantial effort, price, and time are needed. For rapid and cost-effective research, it is critical to apply new methods to the stated purpose. In this research, the compressive and flexural strengths of RAC were predicted using ensemble machine learning methods, including gradient boosting and random forest. Twelve input factors were used in the dataset, and their influence on the strength of RAC was analyzed. The models were validated and compared using correlation coefficients (R2), variance between predicted and experimental results, statistical tests, and k-fold analysis. The random forest approach outperformed gradient boosting in anticipating the strength of RAC, with an R2 of 0.91 and 0.86 for compressive and flexural strength, respectively. The models’ decreased error values, such as mean absolute error (MAE) and root-mean-square error (RMSE), confirmed the higher precision of the random forest models. The MAE values for the random forest models were 4.19 MPa and 0.56 MPa, whereas the MAE values for the gradient boosting models were 4.78 MPa and 0.64 MPa, for compressive and flexural strengths, respectively. Machine learning technologies will benefit the construction sector by facilitating the evaluation of material properties in a quick and cost-effective manner.
Collapse
|
17
|
Application of Machine Learning Approaches to Predict the Strength Property of Geopolymer Concrete. MATERIALS 2022; 15:ma15072400. [PMID: 35407733 PMCID: PMC8999160 DOI: 10.3390/ma15072400] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/01/2022] [Revised: 03/16/2022] [Accepted: 03/21/2022] [Indexed: 12/04/2022]
Abstract
Geopolymer concrete (GPC) based on fly ash (FA) is being studied as a possible alternative solution with a lower environmental impact than Portland cement mixtures. However, the accuracy of the strength prediction still needs to be improved. This study was based on the investigation of various types of machine learning (ML) approaches to predict the compressive strength (C-S) of GPC. The support vector machine (SVM), multilayer perceptron (MLP), and XGBoost (XGB) techniques have been employed to check the difference between the experimental and predicted results of the C-S for the GPC. The coefficient of determination (R2) was used to measure how accurate the results were, which usually ranged from 0 to 1. The results show that the XGB was a more accurate model, indicating an R2 value of 0.98, as opposed to SVM (0.91) and MLP (0.88). The statistical checks and k-fold cross-validation (CV) also confirm the high precision level of the XGB model. The lesser values of the errors for the XGB approach, such as mean absolute error (MAE), mean square error (MSE), and root mean square error (RMSE), were noted as 1.49 MPa, 3.16 MPa, and 1.78 MPa, respectively. These lesser values of the errors also indicate the high precision of the XGB model. Moreover, the sensitivity analysis was also conducted to evaluate the parameter’s contribution towards the anticipation of C-S of GPC. The use of ML techniques for the prediction of material properties will not only reduce the effort of experimental work in the laboratory but also minimize the cast and time for the researchers.
Collapse
|
18
|
Wang Q, Ahmad W, Ahmad A, Aslam F, Mohamed A, Vatin NI. Application of Soft Computing Techniques to Predict the Strength of Geopolymer Composites. Polymers (Basel) 2022; 14:polym14061074. [PMID: 35335405 PMCID: PMC8956037 DOI: 10.3390/polym14061074] [Citation(s) in RCA: 22] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/29/2022] [Revised: 02/24/2022] [Accepted: 02/26/2022] [Indexed: 11/17/2022] Open
Abstract
Geopolymers may be the best alternative to ordinary Portland cement because they are manufactured using waste materials enriched in aluminosilicate. Research on geopolymer composites is accelerating. However, considerable work, expense, and time are needed to cast, cure, and test specimens. The application of computational methods to the stated objective is critical for speedy and cost-effective research. In this study, supervised machine learning approaches were employed to predict the compressive strength of geopolymer composites. One individual machine learning approach, decision tree, and two ensembled machine learning approaches, AdaBoost and random forest, were used. The coefficient correlation (R2), statistical tests, and k-fold analysis were used to determine the validity and comparison of all models. It was discovered that ensembled machine learning techniques outperformed individual machine learning techniques in forecasting the compressive strength of geopolymer composites. However, the outcomes of the individual machine learning model were also within the acceptable limit. R2 values of 0.90, 0.90, and 0.83 were obtained for AdaBoost, random forest, and decision models, respectively. The models’ decreased error values, such as mean absolute error, mean absolute percentage error, and root-mean-square errors, further confirmed the ensembled machine learning techniques’ increased precision. Machine learning approaches will aid the building industry by providing quick and cost-effective methods for evaluating material properties.
Collapse
Affiliation(s)
- Qichen Wang
- Department of Civil and Environmental Engineering, University of Iowa, Iowa City, IA 52242, USA
- Correspondence: (Q.W.); (W.A.)
| | - Waqas Ahmad
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad 22060, Pakistan;
- Correspondence: (Q.W.); (W.A.)
| | - Ayaz Ahmad
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad 22060, Pakistan;
- Faculty of Civil Engineering, Cracow University of Technology, 24 Warszawska Str., 31-155 Cracow, Poland
| | - Fahid Aslam
- Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia;
| | - Abdullah Mohamed
- Research Centre, Future University in Egypt, New Cairo 11745, Egypt;
| | | |
Collapse
|
19
|
Shang M, Li H, Ahmad A, Ahmad W, Ostrowski KA, Aslam F, Joyklad P, Majka TM. Predicting the Mechanical Properties of RCA-Based Concrete Using Supervised Machine Learning Algorithms. MATERIALS 2022; 15:ma15020647. [PMID: 35057364 PMCID: PMC8778266 DOI: 10.3390/ma15020647] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/25/2021] [Revised: 12/28/2021] [Accepted: 01/04/2022] [Indexed: 02/06/2023]
Abstract
Environment-friendly concrete is gaining popularity these days because it consumes less energy and causes less damage to the environment. Rapid increases in the population and demand for construction throughout the world lead to a significant deterioration or reduction in natural resources. Meanwhile, construction waste continues to grow at a high rate as older buildings are destroyed and demolished. As a result, the use of recycled materials may contribute to improving the quality of life and preventing environmental damage. Additionally, the application of recycled coarse aggregate (RCA) in concrete is essential for minimizing environmental issues. The compressive strength (CS) and splitting tensile strength (STS) of concrete containing RCA are predicted in this article using decision tree (DT) and AdaBoost machine learning (ML) techniques. A total of 344 data points with nine input variables (water, cement, fine aggregate, natural coarse aggregate, RCA, superplasticizers, water absorption of RCA and maximum size of RCA, density of RCA) were used to run the models. The data was validated using k-fold cross-validation and the coefficient correlation coefficient (R2), mean square error (MSE), mean absolute error (MAE), and root mean square error values (RMSE). However, the model's performance was assessed using statistical checks. Additionally, sensitivity analysis was used to determine the impact of each variable on the forecasting of mechanical properties.
Collapse
Affiliation(s)
- Meijun Shang
- School of Architetrue and Civil Engineering, Changchun Sci-Tech Unversity, Changchun 130600, China
- Correspondence: (M.S.); (A.A.)
| | - Hejun Li
- Jilin Northeast Architectural and Municipal Engineering Design Institute Co., Ltd., Changchun 130062, China;
| | - Ayaz Ahmad
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad 22060, Pakistan;
- Faculty of Civil Engineering, Cracow University of Technology, 24 Warszawska Str., 31-155 Cracow, Poland;
- Correspondence: (M.S.); (A.A.)
| | - Waqas Ahmad
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad 22060, Pakistan;
| | - Krzysztof Adam Ostrowski
- Faculty of Civil Engineering, Cracow University of Technology, 24 Warszawska Str., 31-155 Cracow, Poland;
| | - Fahid Aslam
- Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia;
| | - Panuwat Joyklad
- Department of Civil and Environmental Engineering, Faculty of Engineering, Srinakharinwirot University, Nakhonnayok 26120, Thailand;
| | - Tomasz M. Majka
- Department of Chemistry and Technology of Polymers, Faculty of Chemical Engineering and Technology, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland;
| |
Collapse
|
20
|
Machine Learning Methods Applied for Modeling the Process of Obtaining Bricks Using Silicon-Based Materials. MATERIALS 2021; 14:ma14237232. [PMID: 34885386 PMCID: PMC8658433 DOI: 10.3390/ma14237232] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/31/2021] [Revised: 11/19/2021] [Accepted: 11/25/2021] [Indexed: 11/18/2022]
Abstract
Most of the time, industrial brick manufacture facilities are designed and commissioned for a particular type of manufacture mix and a particular type of burning process. Productivity and product quality maintenance and improvement is a challenge for process engineers. Our paper aims at using machine learning methods to evaluate the impact of adding new auxiliary materials on the amount of exhaust emissions. Experimental determinations made in similar conditions enabled us to build a database containing information about 121 brick batches. Various models (artificial neural networks and regression algorithms) were designed to make predictions about exhaust emission changes when auxiliary materials are introduced into the manufacture mix. The best models were feed-forward neural networks with two hidden layers, having MSE < 0.01 and r2 > 0.82 and, as regression model, kNN with error < 0.6. Also, an optimization procedure, including the best models, was developed in order to determine the optimal values for the parameters that assure the minimum quantities for the gas emission. The Pareto front obtained in the multi-objective optimization conducted with grid search method allows the user the chose the most convenient values for the dry product mass, clay, ash and organic raw materials which minimize gas emissions with energy potential.
Collapse
|
21
|
Computation of High-Performance Concrete Compressive Strength Using Standalone and Ensembled Machine Learning Techniques. MATERIALS 2021; 14:ma14227034. [PMID: 34832432 PMCID: PMC8618129 DOI: 10.3390/ma14227034] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/23/2021] [Revised: 11/16/2021] [Accepted: 11/17/2021] [Indexed: 11/16/2022]
Abstract
The current trend in modern research revolves around novel techniques that can predict the characteristics of materials without consuming time, effort, and experimental costs. The adaptation of machine learning techniques to compute the various properties of materials is gaining more attention. This study aims to use both standalone and ensemble machine learning techniques to forecast the 28-day compressive strength of high-performance concrete. One standalone technique (support vector regression (SVR)) and two ensemble techniques (AdaBoost and random forest) were applied for this purpose. To validate the performance of each technique, coefficient of determination (R2), statistical, and k-fold cross-validation checks were used. Additionally, the contribution of input parameters towards the prediction of results was determined by applying sensitivity analysis. It was proven that all the techniques employed showed improved performance in predicting the outcomes. The random forest model was the most accurate, with an R2 value of 0.93, compared to the support vector regression and AdaBoost models, with R2 values of 0.83 and 0.90, respectively. In addition, statistical and k-fold cross-validation checks validated the random forest model as the best performer based on lower error values. However, the prediction performance of the support vector regression and AdaBoost models was also within an acceptable range. This shows that novel machine learning techniques can be used to predict the mechanical properties of high-performance concrete.
Collapse
|
22
|
Effects of waste glass and waste marble on mechanical and durability performance of concrete. Sci Rep 2021; 11:21525. [PMID: 34728731 PMCID: PMC8564529 DOI: 10.1038/s41598-021-00994-0] [Citation(s) in RCA: 35] [Impact Index Per Article: 11.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/08/2021] [Accepted: 10/20/2021] [Indexed: 11/08/2022] Open
Abstract
Industrial waste has been rapidly increased day by day because of the fast-growing population which results environmental pollutions. It has been recommended that the disposal of industrial waste would be greatly reduced if it could be incorporated in concrete production. In cement concrete technology, there are many possibilities to use waste materials either as cement replacement or aggregate in concrete production. Two major industrials waste are glass and marble waste. The basic objective of this investigation is to examine the characteristics of concrete waste glass (WG) as binding material in proportions 10%, 20% and 30% by weight of cement. Furthermore, to obtain high strength concrete, waste marble in proportion of 40%, 50% and 60% by weight cement as fine aggregate were used as a filler material to fill the voids between concrete ingredients. Fresh properties were evaluated through slump cone test while mechanical performance was evaluated through compressive strength and split tensile strength which were performed after 7 days, 28 days and 56 days curing. Results show that, workability of concrete decreased with incorporation of waste glass and marble waste. Furthermore, mechanical performance improved considerably up 20% and 50% substitution of waste glass and waste marble respectively. Statistical approach of Response Surface Methodology (RSM) was used optimize both waste materials in concrete. Results indicate better agreement between statistical and experimental results.
Collapse
|
23
|
Ahmad A, Ahmad W, Chaiyasarn K, Ostrowski KA, Aslam F, Zajdel P, Joyklad P. Prediction of Geopolymer Concrete Compressive Strength Using Novel Machine Learning Algorithms. Polymers (Basel) 2021; 13:polym13193389. [PMID: 34641204 PMCID: PMC8512145 DOI: 10.3390/polym13193389] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/02/2021] [Revised: 09/26/2021] [Accepted: 09/29/2021] [Indexed: 12/01/2022] Open
Abstract
The innovation of geopolymer concrete (GPC) plays a vital role not only in reducing the environmental threat but also as an exceptional material for sustainable development. The application of supervised machine learning (ML) algorithms to forecast the mechanical properties of concrete also has a significant role in developing the innovative environment in the field of civil engineering. This study was based on the use of the artificial neural network (ANN), boosting, and AdaBoost ML approaches, based on the python coding to predict the compressive strength (CS) of high calcium fly-ash-based GPC. The performance comparison of both the employed techniques in terms of prediction reveals that the ensemble ML approaches, AdaBoost, and boosting were more effective than the individual ML technique (ANN). The boosting indicates the highest value of R2 equals 0.96, and AdaBoost gives 0.93, while the ANN model was less accurate, indicating the coefficient of determination value equals 0.87. The lesser values of the errors, MAE, MSE, and RMSE of the boosting technique give 1.69 MPa, 4.16 MPa, and 2.04 MPa, respectively, indicating the high accuracy of the boosting algorithm. However, the statistical check of the errors (MAE, MSE, RMSE) and k-fold cross-validation method confirms the high precision of the boosting technique. In addition, the sensitivity analysis was also introduced to evaluate the contribution level of the input parameters towards the prediction of CS of GPC. The better accuracy can be achieved by incorporating other ensemble ML techniques such as AdaBoost, bagging, and gradient boosting.
Collapse
Affiliation(s)
- Ayaz Ahmad
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad 22060, Pakistan; (A.A.); (W.A.)
- Faculty of Civil Engineering, Cracow University of Technology, 24 Warszawska Str., 31-155 Cracow, Poland; (K.A.O.); (P.Z.)
| | - Waqas Ahmad
- Department of Civil Engineering, COMSATS University Islamabad, Abbottabad 22060, Pakistan; (A.A.); (W.A.)
| | - Krisada Chaiyasarn
- Thammasat Research Unit in Infrastructure Inspection and Monitoring, Repair and Strengthening (IIMRS), Faculty of Engineering, Thammasat University Rangsit, Klong Luang Pathumthani 12121, Thailand
- Correspondence:
| | - Krzysztof Adam Ostrowski
- Faculty of Civil Engineering, Cracow University of Technology, 24 Warszawska Str., 31-155 Cracow, Poland; (K.A.O.); (P.Z.)
| | - Fahid Aslam
- Department of Civil Engineering, College of Engineering, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia;
| | - Paulina Zajdel
- Faculty of Civil Engineering, Cracow University of Technology, 24 Warszawska Str., 31-155 Cracow, Poland; (K.A.O.); (P.Z.)
| | - Panuwat Joyklad
- Department of Civil and Environmental Engineering, Faculty of Engineering, Srinakharinwirot University, Nakhonnayok 26120, Thailand;
| |
Collapse
|
24
|
Application of Advanced Machine Learning Approaches to Predict the Compressive Strength of Concrete Containing Supplementary Cementitious Materials. MATERIALS 2021; 14:ma14195762. [PMID: 34640160 PMCID: PMC8510219 DOI: 10.3390/ma14195762] [Citation(s) in RCA: 33] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/20/2021] [Revised: 09/22/2021] [Accepted: 09/29/2021] [Indexed: 11/16/2022]
Abstract
The casting and testing specimens for determining the mechanical properties of concrete is a time-consuming activity. This study employed supervised machine learning techniques, bagging, AdaBoost, gene expression programming, and decision tree to estimate the compressive strength of concrete containing supplementary cementitious materials (fly ash and blast furnace slag). The performance of the models was compared and assessed using the coefficient of determination (R2), mean absolute error, mean square error, and root mean square error. The performance of the model was further validated using the k-fold cross-validation approach. Compared to the other employed approaches, the bagging model was more effective in predicting results, with an R2 value of 0.92. A sensitivity analysis was also prepared to determine the level of contribution of each parameter utilized to run the models. The use of machine learning (ML) techniques to predict the mechanical properties of concrete will be beneficial to the field of civil engineering because it will save time, effort, and resources. The proposed techniques are efficient to forecast the strength properties of concrete containing supplementary cementitious materials (SCM) and pave the way towards the intelligent design of concrete elements and structures.
Collapse
|