1
|
Singh P, Ranganathan R. Mechanical and Viscoelastic Properties of Stacked and Grafted Graphene/Graphene Oxide-Polyethylene Nanocomposites: A Coarse-Grained Molecular Dynamics Study. ACS Omega 2024; 9:9063-9075. [PMID: 38434848 PMCID: PMC10906040 DOI: 10.1021/acsomega.3c07690] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/04/2023] [Revised: 01/30/2024] [Accepted: 02/06/2024] [Indexed: 03/05/2024]
Abstract
High-performance natural materials with superior mechanical properties often possess a hierarchical structure across multiple length scales. Nacre, also known as the mother of pearl, is an example of such a material and exhibits remarkable strength and toughness. The layered hierarchical architecture across different length scales is responsible for the efficient toughness and energy dissipation. To develop high-performance artificial nacre-like composites, it is necessary to mimic this layered structure and understand the molecular phenomena at the interface. This study uses coarse-grained molecular dynamics simulations to investigate the structure-property relationship of stacked graphene-polyethylene (PE) nanocomposites. Uniaxial and oscillatory shear deformation simulations were conducted to explore the composites' mechanical and viscoelastic behavior. The effect of grafting on the glass-transition temperature and the mechanical and viscoelastic behavior was also examined. The two examined microstructures, the stacked and grafted GnP (graphene nanoplatelet)-PE composites, demonstrated significant enhancement in the Young's modulus and yield strength when compared to the pristine PE. The study also delves into the viscoelastic properties of polyethylene nanocomposites containing graphene and graphene oxide. The grafted composite demonstrated an increased elastic energy and improved capacity for stress transfer. Our study sheds light on the energy dissipation properties of layered nanocomposites through underlying molecular mechanisms, providing promising prospects for designing novel biomimetic polymer nanocomposites.
Collapse
Affiliation(s)
- Param
Punj Singh
- Department of Materials Engineering, Indian Institute of Technology Gandhinagar, Gandhinagar 382355, India
| | - Raghavan Ranganathan
- Department of Materials Engineering, Indian Institute of Technology Gandhinagar, Gandhinagar 382355, India
| |
Collapse
|
2
|
Alves BIA, Marvila MT, Linhares Júnior JAT, Vieira CMF, Alexandre J, de Azevedo ARG. Alkaline Activation of Binders: A Comparative Study. Materials (Basel) 2024; 17:667. [PMID: 38591511 PMCID: PMC10856149 DOI: 10.3390/ma17030667] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/26/2023] [Revised: 01/24/2024] [Accepted: 01/27/2024] [Indexed: 04/10/2024]
Abstract
Binders formulated with activated alkali materials to replace Portland cement, which has high polluting potential due to CO2 emissions in its manufacture, have increasingly been developed. The objective of this study is to evaluate the main properties of activated alkali materials (AAM) produced by blast furnace slag, fly ash, and metakaolin. Initially, binders were characterized by their chemical, mineralogical and granulometric composition. Later, specimens were produced, with molarity variation between 4.00 and 5.50, using the binders involved in the research. In preparing the activating solution, sodium hydroxide and silicate were used. The evaluated properties of AAM were consistency, viscosity, water absorption, density, compressive strength (7 days of cure), calorimetry, mineralogical analysis by X-ray diffraction, and morphological analysis by scanning electron microscopy. The results of evaluation in the fresh state demonstrate that metakaolin has the lowest workability indices of the studied AAM. The results observed in the hardened state indicate that the metakaolin activation process is optimized with normal cure and molarity of 4.0 and 4.5 mol/L, obtaining compressive strength results after 7 days of curing of approximately 30 MPa. The fly ash activation process is the least intense among the evaluated binders. This can be seen from the absence of phases formed in the XRD in the compositions containing fly ash as binder. Unlike blast furnace slag and metakaolin, the formation of sodalite, faujasite or tobermorite is not observed. Finally, the blast furnace slag displays more intense reactivity during thermal curing, obtaining compressive strength results after 7 days of curing of around 25 MPa. This is because the material's reaction kinetics are low but can be increased in an alkaline environment, and by the effect of temperature. From these results, it is concluded that each precursor has its own activation mechanism, observed by the techniques used in this research. From the results obtained in this study, it is expected that the alkaline activation process of the types of binders evaluated herein will become a viable alternative for replacing Portland cement, thus contributing to cement technology and other cementitious materials.
Collapse
Affiliation(s)
- Bianca Ignacio Almeida Alves
- LAMAV—Advanced Materials Laboratory, UENF—University of the Northern Rio de Janeiro, Av. Alberto Lamego, 2000, Campos dos Goytacazes 28013-602, Brazil; (B.I.A.A.); (J.A.T.L.J.); (C.M.F.V.)
| | - Markssuel Teixeira Marvila
- Rio Paranaíba Campus, UFV—Federal University of Viçosa, Rodovia BR 230 Km 7, Rio Paranaíba 38810-000, Brazil;
| | - José Alexandre Tostes Linhares Júnior
- LAMAV—Advanced Materials Laboratory, UENF—University of the Northern Rio de Janeiro, Av. Alberto Lamego, 2000, Campos dos Goytacazes 28013-602, Brazil; (B.I.A.A.); (J.A.T.L.J.); (C.M.F.V.)
| | - Carlos Maurício Fontes Vieira
- LAMAV—Advanced Materials Laboratory, UENF—University of the Northern Rio de Janeiro, Av. Alberto Lamego, 2000, Campos dos Goytacazes 28013-602, Brazil; (B.I.A.A.); (J.A.T.L.J.); (C.M.F.V.)
| | - Jonas Alexandre
- LECIV—Civil Engineering Laboratory, UENF—State University of the Northern Rio de Janeiro, Av. Alberto Lamego, 2000, Campos dos Goytacazes 28013-602, Brazil;
| | - Afonso Rangel Garcez de Azevedo
- LECIV—Civil Engineering Laboratory, UENF—State University of the Northern Rio de Janeiro, Av. Alberto Lamego, 2000, Campos dos Goytacazes 28013-602, Brazil;
| |
Collapse
|
3
|
Han Y, Zhou T. Performance Analysis of High-Performance Concrete Materials in Civil Construction. Materials (Basel) 2023; 16:5711. [PMID: 37630002 PMCID: PMC10456318 DOI: 10.3390/ma16165711] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/09/2023] [Revised: 08/17/2023] [Accepted: 08/18/2023] [Indexed: 08/27/2023]
Abstract
This paper develops the mechanical and durable samples of C50 high-performance concrete, studies the mechanical properties, crack resistance, sulfate attack resistance, frost resistance, and impermeability of concrete with different mineral admixtures of mineral powder and fly ash, and obtains the best mineral admixture of mineral powder and fly ash to improve the performance of high-performance concrete. The results show that the doping effect is the best when the ratio of prepared mineral powder to fly ash is 3:2. With the increase in the mineral powder-fly ash admixture, the slump and expansion of high-performance concrete decrease rapidly at first and then slowly. In total, 60% doping is the turning point; the compressive and flexural strengths of concrete decreased slowly at first and then rapidly. Taking 30% of the admixture as the turning point, 35% of the mineral powder fly ash is generally selected. By mixing and adding a certain proportion of fly ash and mineral powder admixtures, the crack resistance of concrete is enhanced, and the shrinkage and cracking are reduced. The corrosion resistance coefficient will exceed 88%, the relative dynamic elastic modulus will exceed 95%, and the impermeability grade will reach P17. The durability of concrete can be improved by adding mineral admixtures.
Collapse
Affiliation(s)
- Yongguang Han
- Architectural Engineering College of Chongqing City Vocational College, Chongqing 400044, China;
| | - Tianhua Zhou
- School of Civil Engineering, Chang’an University, Xi’an 710054, China
| |
Collapse
|
4
|
Shi K, Deng H, Hu J, Zhou J, Cai X, Liu Z. Effects of Steel Slag Powder Content and Curing Condition on the Performance of Alkali-Activated Materials Based UHPC Matrix. Materials (Basel) 2023; 16:ma16103875. [PMID: 37241502 DOI: 10.3390/ma16103875] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/10/2023] [Revised: 05/15/2023] [Accepted: 05/18/2023] [Indexed: 05/28/2023]
Abstract
The accumulation of steel slag and other industrial solid wastes has caused serious environmental pollution and resource waste, and the resource utilization of steel slag is imminent. In this paper, alkali-activated ultra-high-performance concrete (AAM-UHPC) was prepared by replacing ground granulated blast furnace slag (GGBFS) powder with different proportions of steel slag powder, and its workability, mechanical properties, curing condition, microstructure, and pore structure were investigated. The results illustrate that the incorporation of steel slag powder can significantly delay the setting time and improve the flowability of AAM-UHPC, making it possible for engineering applications. The mechanical properties of AAM-UHPC showed a tendency to increase and then decrease with the increase in steel slag dosing and reached their best performance at a 30% dosage of steel slag. The maximum compressive strength and flexural strength are 157.1 MPa and 16.32 Mpa, respectively. High-temperature steam or hot water curing at an early age was beneficial to the strength development of AAM-UHPC, but continuous high-temperature, hot, and humid curing would lead to strength inversion. When the dosage of steel slag is 30%, the average pore diameter of the matrix is only 8.43 nm, and the appropriate steel slag dosage can reduce the heat of hydration and refine the pore size distribution, making the matrix denser.
Collapse
Affiliation(s)
- Kangyi Shi
- School of Civil Engineering and Architecture, Wuhan Polytechnic University, Wuhan 430072, China
| | - Hongyang Deng
- School of Civil Engineering and Architecture, Wuhan Polytechnic University, Wuhan 430072, China
| | - Jinxuan Hu
- School of Civil Engineering and Architecture, Wuhan Polytechnic University, Wuhan 430072, China
| | - Junqi Zhou
- School of Civil Engineering and Architecture, Wuhan Polytechnic University, Wuhan 430072, China
| | - Xinhua Cai
- State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University, Wuhan 430072, China
| | - Zhiwei Liu
- School of Civil Engineering and Architecture, Wuhan Polytechnic University, Wuhan 430072, China
| |
Collapse
|
5
|
Markusík D, Bocian L, Novotný R, Palovčík J, Hrbáčová M. Influence of Fumed Nanosilica on Ballistic Performance of UHPCs. Materials (Basel) 2023; 16:2151. [PMID: 36984030 PMCID: PMC10052983 DOI: 10.3390/ma16062151] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/30/2023] [Revised: 02/18/2023] [Accepted: 03/05/2023] [Indexed: 06/18/2023]
Abstract
This research delves into the potential use of fumed nanosilica in ultra-high performance concrete for ballistic protection. First, the mechanical properties, slump flow, and specific gravity of UHPC with different contents of Aerosil 200 were determined. Then, calorimetric studies were conducted on these cement composites. Lastly, the differential efficiency factor and spalling area of UHPC with fumed nanosilica were determined. It was found out that the slump flow, the mechanical properties, and differential efficiency factor are slightly decreased by the addition of fumed nanosilica. However, the addition of the fumed nanosilica is beneficial in terms of the spalling area decrease and it is highly reactive during the induction period. Some of the results are supported by BSEM imaging.
Collapse
|
6
|
Xie X, Fan J, Guo P, Huang H, Hu J, Wei J. Composition Design and Fundamental Properties of Ultra-High-Performance Concrete Based on a Modified Fuller Distribution Model. Materials (Basel) 2023; 16:ma16020700. [PMID: 36676437 PMCID: PMC9861875 DOI: 10.3390/ma16020700] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/19/2022] [Revised: 01/01/2023] [Accepted: 01/06/2023] [Indexed: 06/12/2023]
Abstract
Both the discrete and continuous particle packing models are used to design UHPC, but the influences of a water film covering the particle surfaces on the compactness of the particle system were not considered in these models. In fact, the water film results in a certain distance between solid particles (DSP), which affects the compactness of the particle system, especially for cementitious materials with small particle sizes. In the present study, the mixture design method for UHPC was proposed based on the Fuller distribution model modified using the DSP. Then, the components of cementitious materials and aggregates were optimized, and the UHPC matrices with high solid concentrations were obtained. The results showed that the solid concentration, slump flow, and compressive strength of the UHPC matrix reached 77.1 vol.%, 810 mm, and 162.0 MPa, respectively. By replacing granulated blast furnace slag (GBFS) with quartz powder (QP), the flexural strength of the UHPC matrix was increased without reducing its compressive strength. When the steel fiber with a volume fraction of 1.5% was used, the slump flow, compressive strength, tensile strength, and flexural strength of the UHPC reached 740 mm, 175.6 MPa, 9.7 MPa, and 22.8 MPa, respectively. After 500 freeze-thaw cycles or 60 dry-wet cycles under sulfate erosion, the mechanical properties did not deteriorate. The chloride diffusion coefficients in UHPCs were lower than 3.0 × 10-14 m2/s, and the carbonation depth of each UHPC was 0 mm after carbonization for 28 days. The UHPCs presented ideal workability, mechanical properties, and durability, demonstrating the validity of the method proposed for UHPC design.
Collapse
Affiliation(s)
- Xiaogeng Xie
- School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China
| | - Junqi Fan
- Research Institute for National Defense Engineering of Academy of Military Sciences PLA China, Luoyang 471023, China
| | - Peng Guo
- Research Institute for National Defense Engineering of Academy of Military Sciences PLA China, Luoyang 471023, China
| | - Haoliang Huang
- School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China
| | - Jie Hu
- School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China
| | - Jiangxiong Wei
- School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China
| |
Collapse
|
7
|
Yang J, Li G, Yang W, Guan J. Effect of Polycarboxylic Grinding Aid on Cement Chemistry and Properties. Polymers (Basel) 2022; 14:3905. [PMID: 36146050 DOI: 10.3390/polym14183905] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/14/2022] [Revised: 09/10/2022] [Accepted: 09/13/2022] [Indexed: 11/18/2022] Open
Abstract
In view of the disadvantages of polycarboxylic acid grinding aids, such as poor reinforcement effect and cumbersome synthesis process, a new type of polycarboxylic acid grinding aid was prepared to meet the requirements of multifunctional admixture for cement concrete. The polycarboxylate grinding aid (PC) was prepared using acrylic acid, sodium allyl sulfonate, and isoprenol polyoxyethylene ether (TPEG) as raw materials, and ammonium persulfate as initiator in the nitrogen atmosphere. The effect of PC and its compound with triethanolamine (TEA) and triisopropanolamine (TIPA) on cement particle size and strength, and hydration process and structures of hydrated products were investigated. Moreover, the grinding mechanism of grinding aids was also proposed. The results indicate that the PC has good performance in both grinding and high-efficiency water-reducing. The average particle diameter of cement was reduced by 3.65 μm when 0.03 wt% of PC was added as grinding aid. Moreover, a high initial fluidity of the cement paste, 290 mm, could be reached when 0.08 wt% of PC was added. The fluidity loss of cement paste after 30 min and 60 min was 265 mm and 260 mm, respectively. After PC compounding with TEA and TIPA, 4.07 μm and 4.7 μm of the average particle size of the cement can be reduced, respectively. Based on the investigations on the hydration rate of cement hydration, the phases, and the microstructures of the hardened slurry, it could be concluded that grinding aids can change the hydration process of cement and improve the morphologies and structures of hydration products without influence on the type of hydrated products. Note that the compounded grinding aids, such as PC with TEA or PC with TIPA, can more effectively enhance the early and late strength of cement. This shows excellent comprehensive performance. In this study, a new type of polycarboxylic acid grinding aid was prepared to meet the requirements of the versatility of cement concrete additives, and to simplify the synthesis process, reduce production costs, improve the grinding effect, and improve the performance of cement concrete.
Collapse
|
8
|
Sugama T, Pyatina T. Thermally Insulating, Thermal Shock Resistant Calcium Aluminate Phosphate Cement Composites for Reservoir Thermal Energy Storage. Materials (Basel) 2022; 15:6328. [PMID: 36143639 PMCID: PMC9503598 DOI: 10.3390/ma15186328] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/04/2022] [Revised: 08/23/2022] [Accepted: 08/24/2022] [Indexed: 06/16/2023]
Abstract
This paper presents the use of hydrophobic silica aerogel (HSA) and hydrophilic fly ash cenosphere (FCS) aggregates for improvements in the thermal insulating and mechanical properties of 100- and 250 °C-autoclaved calcium aluminate phosphate (CaP) cement composites reinforced with micro-glass (MGF) and micro-carbon (MCF) fibers for deployment in medium- (100 °C) and high-temperature (250 °C) reservoir thermal energy storage systems. The following six factors were assessed: (1) Hydrothermal stability of HSA; (2) Pozzolanic activity of the two aggregates and MGF in an alkali cement environment; (3) CaP cement slurry heat release during hydration and chemical reactions; (4) Composite phase compositions and phase transitions; (5) Mechanical behavior; (6) Thermal shock (TS) resistance at temperature gradients of 150 and 225 °C. The results showed that hydrophobic trimethylsilyl groups in trimethylsiloxy-linked silica aerogel structure were susceptible to hydrothermal degradation at 250 °C. This degradation was followed by pozzolanic reactions (PR) of HSA, its dissolution, and the formation of a porous microstructure that caused a major loss in the compressive strength of the composites at 250 °C. The pozzolanic activities of FCS and MGF were moderate, and they offered improved interfacial bonding at cement-FCS and cement-MGF joints through a bridging effect by PR products. Despite the PR of MGF, both MGF and MCF played an essential role in minimizing the considerable losses in compressive strength, particularly in toughness, engendered by incorporating weak HSA. As a result, a FCS/HSA ratio of 90/10 in the CaP composite system was identified as the most effective hybrid insulating aggregate composition, with a persistent compressive strength of more than 7 MPa after three TS tests at a 150 °C temperature gradient. This composite displayed thermal conductivity of 0.28 and 0.35 W/mK after TS with 225 and 150 °C thermal gradients, respectively. These values, below the TC of water (TC water = 0.6 W/mK), were measured under water-saturated conditions for applications in underground reservoirs. However, considering the hydrothermal disintegration of HSA at 250 °C, these CaP composites have potential applications for use in thermally insulating, thermal shock-resistant well cement in a mid-temperature range (100 to 175 °C) reservoir thermal energy storage system.
Collapse
|
9
|
Zhou M, Bai J, Li S, Zhang K, Li C, Wang X. Mechanical Properties and Uniaxial Failure Behavior of Concrete with Different Solid Waste Coarse Aggregates. Materials (Basel) 2022; 15:6259. [PMID: 36143570 PMCID: PMC9504492 DOI: 10.3390/ma15186259] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/12/2022] [Revised: 08/29/2022] [Accepted: 09/06/2022] [Indexed: 06/16/2023]
Abstract
To reveal the differences between the mechanical properties of solid waste coarse aggregate concrete and natural coarse aggregate concrete (NCAC) under equal strength, the basic mechanical properties of coarse aggregate concrete with seven different solid wastes (i.e., self-combusted coal gangue, uncombusted coal gangue, marble sheet waste, granite sheet waste, iron waste rock, recycled concrete, and self-combusted coal gangue ceramicite) were tested, and the trends in failure morphology, elastic modulus, and the stress-strain full curves of the different solid waste coarse aggregate concretes were analyzed and compared with NCAC. Finally, the interfacial structure of the concrete was characterized by SEM. The results showed that C30 strength grade concrete was prepared with different solid waste coarse aggregates; however, the 28 d compressive strength, split tensile strength, axial compression strength, flexural strength, and elastic modulus of the concrete was 35.26-47.35, 2.13-3.35, 26.43-42.70, 2.83-3.94, and 17.3-31.2, respectively. The modulus of elasticity of the solid waste coarse aggregate concrete was smaller than the NCAC under equal strength, with a maximum difference of 45%. The peak compressive strain and ultimate compressive strain were larger than the NCAC, with a maximum difference of 43%. The crushing value of the solid waste coarse aggregate affected the splitting tensile strength, flexural strength, and modulus of elasticity of the concrete to a greater extent than the compressive strength. The transition zone at the concrete interface of the coarse aggregates with different solid wastes varied widely. The porous micro-pumping effect of the self-combusted gangue and self-combusted gangue vitrified reinforced the concrete interface transition zone, and the polished surface of sheet waste, uncombusted gangue, and recycled concrete aggregate surface adhesion weakened the interface transition zone; Finally, the uniaxial compressive stress-strain curve model for concrete with different solid waste coarse aggregates was established based on the Guo Zhenhai model.
Collapse
Affiliation(s)
- Mei Zhou
- College of Civil Engineering, Liaoning Technical University, Fuxin 123000, China
- Liaoning Provincial Key Laboratory of Coal Gangue Resource Utilization and Energy-Saving Building Materials, Fuxin 123000, China
| | - Jinting Bai
- College of Civil Engineering, Liaoning Technical University, Fuxin 123000, China
- Liaoning Provincial Key Laboratory of Coal Gangue Resource Utilization and Energy-Saving Building Materials, Fuxin 123000, China
| | - Shaowei Li
- Fujian Building Research Institute Co., Ltd., Fuzhou 350025, China
- Fujian Provincial Key Laboratory of Green Building Technology, Fuzhou 350025, China
| | - Kai Zhang
- College of Civil Engineering, Liaoning Technical University, Fuxin 123000, China
- Liaoning Provincial Key Laboratory of Coal Gangue Resource Utilization and Energy-Saving Building Materials, Fuxin 123000, China
| | - Chao Li
- College of Civil Engineering, Liaoning Technical University, Fuxin 123000, China
- Liaoning Provincial Key Laboratory of Coal Gangue Resource Utilization and Energy-Saving Building Materials, Fuxin 123000, China
| | - Xinyi Wang
- College of Civil Engineering, Liaoning Technical University, Fuxin 123000, China
- Liaoning Provincial Key Laboratory of Coal Gangue Resource Utilization and Energy-Saving Building Materials, Fuxin 123000, China
| |
Collapse
|
10
|
Khan K, Ahmad W, Amin MN, Nazar S. A Scientometric-Analysis-Based Review of the Research Development on Geopolymers. Polymers (Basel) 2022; 14:3676. [PMID: 36080752 DOI: 10.3390/polym14173676] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/07/2022] [Revised: 06/24/2022] [Accepted: 06/25/2022] [Indexed: 11/28/2022] Open
Abstract
A scientometric-based assessment of the literature on geopolymers was conducted in this study to determine its critical aspects. Typical review studies are restricted in their capability to link disparate segments of the literature in a systematic and exact way. Knowledge mapping, co-citation, and co-occurrence are very difficult components of creative research. This study adopted an advanced strategy of data mining, data processing and analysis, visualization and presentation, and interpretation of the bibliographic data on geopolymers. The Scopus database was used to search for and retrieve the data needed to complete the study’s objectives. The relevant sources of publications, keyword assessment, productive authors based on publications and citations, top papers based on citations received, and areas actively engaged in the research of geopolymers are recognized during the data assessment. The VOSviewer (VOS: visualization of similarities) software application was employed to analyze the literature data comprising citation, bibliographic, abstract, keywords, funding, and other information from 7468 relevant publications. In addition, the applications and restrictions associated with the use of geopolymers in the construction sector are discussed, as well as possible solutions to overcome these restrictions. The scientometric analysis revealed that the leading publication source (journal) in terms of articles and citations is “Construction and building materials”; the mostly employed keywords are geopolymer, fly ash, and compressive strength; and the top active and contributing countries based on publications are China, India, and Australia. Because of the quantitative and graphical representation of participating nations and researchers, this study can help academics to create collaborative efforts and exchange creative ideas and approaches. In addition, this study concluded that the large-scale usage of geopolymer concrete is constrained by factors such as curing regime, activator solution scarcity and expense, efflorescence, and alkali–silica reaction. However, embracing the potential solutions outlined in this study might assist in boosting the building industry’s adoption of geopolymer concrete.
Collapse
|
11
|
Wang Q, Huang W, Liang Y, Li C, Lai M, Sun J. Eco-Sustainable Magnesium Oxychloride Cement Pastes Containing Waste Ammonia Soda Residue and Fly Ash. Materials (Basel) 2022; 15:5941. [PMID: 36079323 PMCID: PMC9457515 DOI: 10.3390/ma15175941] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/03/2022] [Revised: 08/22/2022] [Accepted: 08/24/2022] [Indexed: 06/15/2023]
Abstract
Magnesium oxychloride cement (MOC), a type of special construction material, has drawn much research attention in solid waste utilization and environmental protection due to its eco-friendly production. Ammonia soda residue (ASR), a by-product generated from sodium carbonate manufacturing, is one of the industrial wastes that can be recycled in MOC systems. However, ASR exhibits adverse effects on the fresh performance and volume stability of MOC pastes. This paper aims at improving the properties of ASR-MOC by introducing fly ash (FA), solid waste from the power industry. Firstly, the roles of FA in MOC pastes are evaluated and analyzed. Then, three substitution ratios of FA (33.3%, 50% and 66.7% in weight) for ASR are designed for MOC pastes with 10% to 40% industrial wastes. Flowability, setting, strength and expansion of all mixtures were experimentally studied. Furthermore, X-ray diffraction (XRD) and scanning electron microscope (SEM) approaches were adopted to illustrate the microstructure changes. Results show that by adding different amounts of FA, the inferior flowability of MOC caused by ASR can be improved by 6-23%, the setting process can be prolonged by 30-55% and the expansion ratio can be reduced by 14-66%. The intensity of characteristic peaks of 5-phase and Mg(OH)2, together with the degrees of crystallization in XRD curves, well explain the strength variation and volume stability of ASR-MOC pastes. According to the regulation of relative specification, up to 20% of solid wastes in weight (10% FA + 10% ASR) can be consumed, contributing greatly to the greener sustainable development of construction materials.
Collapse
|
12
|
Wu Y, Qiao WG, Li YZ, Liu HN, Tang C, Zhang S, Zhang XL, Lu JG, Chen PC. Research on Cement Slurry Using Silica Fume Instead of Fly Ash. Materials (Basel) 2022; 15:5626. [PMID: 36013764 PMCID: PMC9414665 DOI: 10.3390/ma15165626] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/27/2022] [Revised: 08/11/2022] [Accepted: 08/12/2022] [Indexed: 06/15/2023]
Abstract
Ordinary cement is not environmentally friendly, has high cost and lacks superior performance. Many scholars use various admixtures to adjust the properties of cement slurry, but admixtures are usually not environmentally friendly, and it is difficult to ensure that the properties after deployment meet engineering requirements. In this study, a variety of admixtures were obtained using the environmental protection method, and the optimal mixing ratio was analyzed by combining the entropy weight method and the Taguchi grey relational analysis method. The developed cement slurry was compared with conventional slurry from both macroscopic and microscopic aspects. Aiming at the problem that previous scholars lacked the engineering feasibility verification of the developed slurry, this study combined the constitutive equation regression analysis method, discrete element numerical simulation and other methods to study various actual engineering conditions. The results show that the optimal mix ratio of silica fume cement slurry has good permeability characteristics under the conditions of different roughness, grouting pressure and confining pressure. At the same time, under different geological temperatures and different erosive liquid states, the cement slurry stone body shows good properties of reinforcement materials.
Collapse
Affiliation(s)
- Yue Wu
- Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and Mitigation, Shandong University of Science and Technology, Qingdao 266590, China
| | - Wei-Guo Qiao
- Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and Mitigation, Shandong University of Science and Technology, Qingdao 266590, China
| | - Yan-Zhi Li
- Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and Mitigation, Shandong University of Science and Technology, Qingdao 266590, China
| | - Hui-Ni Liu
- Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and Mitigation, Shandong University of Science and Technology, Qingdao 266590, China
| | - Chao Tang
- Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and Mitigation, Shandong University of Science and Technology, Qingdao 266590, China
| | - Shuai Zhang
- Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and Mitigation, Shandong University of Science and Technology, Qingdao 266590, China
- School of Civil Engineering, Ludong University, Yantai 264025, China
| | - Xiao-Li Zhang
- School of Civil Engineering, Ludong University, Yantai 264025, China
| | - Ji-Gang Lu
- Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and Mitigation, Shandong University of Science and Technology, Qingdao 266590, China
| | - Peng-Cheng Chen
- Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and Mitigation, Shandong University of Science and Technology, Qingdao 266590, China
| |
Collapse
|
13
|
Shilar FA, Ganachari SV, Patil VB, Javed S, Khan TMY, Baig RU. Assessment of Destructive and Nondestructive Analysis for GGBS Based Geopolymer Concrete and Its Statistical Analysis. Polymers (Basel) 2022; 14:polym14153132. [PMID: 35956647 PMCID: PMC9371249 DOI: 10.3390/polym14153132] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/21/2022] [Revised: 07/23/2022] [Accepted: 07/29/2022] [Indexed: 02/04/2023] Open
Abstract
Geopolymer is the alternative to current construction material trends. In this paper, an attempt is made to produce a sustainable construction composite material using geopolymer. Ground granulated blast furnace slag (GGBS)-based geopolymer concrete was prepared and tested for different alkaline to binder ratios (A/B). The effect of various temperatures on compressive strength properties was assessed. The cubes were exposed to temperature ranging from 50 to 70 °C for a duration ranging from 2 to 10 h, and the compressive strength of the specimens was analyzed for destructive and non-destructive analysis and tested for 7, 28, and 90 days. The obtained compressive strength (CS) results were analyzed employing the probability plot (PP) curve, distribution overview curve (DOC), probability density function (PDF), Weibull, survival, and hazard function curve. Maximum compressive strength was achieved for the temperature of 70 °C and an A/B of 0.45 for destructive tests and non-destructive tests with 44.6 MPa and 43.56 MPa, respectively, on 90 days of testing. The survival and hazard function curves showed incremental distribution characteristics for 28 and 90 days of testing results with a probability factor ranging from 0.8 to 1.0.
Collapse
Affiliation(s)
- Fatheali A. Shilar
- Department of Civil Engineering, Jain College of Engineering, Belagavi 590014, Karnataka, India;
| | - Sharanabasava V. Ganachari
- Department of Chemistry, School of Advanced Science, KLE Technological University, Hubballi 580031, Karnataka, India
- Correspondence: ; Tel.: +91-836-2378235
| | - Veerabhadragouda B. Patil
- Institute of Energetic Materials, Faculty of Chemical Technology, University of Pardubice, 53210 Pardubice, Czech Republic;
| | - Syed Javed
- Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha 61421, Saudi Arabia; (S.J.); (T.M.Y.K.)
| | - T M Yunus Khan
- Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha 61421, Saudi Arabia; (S.J.); (T.M.Y.K.)
- Research Center for Advanced Materials Science (RCAMS), King Khalid University, Abha 61413, Saudi Arabia
| | - Rahmath Ulla Baig
- Department of Industrial Engineering, College of Engineering, King Khalid University, Abha 61421, Saudi Arabia;
| |
Collapse
|
14
|
Marvila M, de Matos P, Rodríguez E, Monteiro SN, de Azevedo ARG. Recycled Aggregate: A Viable Solution for Sustainable Concrete Production. Materials 2022; 15:ma15155276. [PMID: 35955212 PMCID: PMC9369566 DOI: 10.3390/ma15155276] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/17/2022] [Revised: 07/04/2022] [Accepted: 07/15/2022] [Indexed: 02/01/2023]
Abstract
Construction and demolition activities consume large amounts of natural resources, generating 4.5 bi tons of solid waste/year, called construction and demolition waste (C&DW) and other wastes, such as ceramic, polyethylene terephthalate (PET), glass, and slag. Furthermore, around 32 bi tons of natural aggregate (NA) are extracted annually. In this scenario, replacing NA with recycled aggregate (RA) from C&DW and other wastes can mitigate environmental problems. We review the use of RA for concrete production and draw the main challenges and outlook. RA reduces concrete’s fresh and hardened performance compared to NA, but these reductions are often negligible when the replacement levels are kept up to 30%. Furthermore, we point out efficient strategies to mitigate these performance reductions. Efforts must be spent on improving the efficiency of RA processing and the international standardization of RA.
Collapse
Affiliation(s)
- Markssuel Marvila
- Advanced Materials Laboratory (LAMAV), UFV—Federal University of Viçosa Campus Rio Paranaíba (UFV-CRP), Rodovia BR 230 KM 7, Rio Paranaíba 38810-000, Brazil;
| | - Paulo de Matos
- Department of Structures and Civil Construction, UFSM—Federal University of Santa Maria, Coordenadoria Acadêmica, Rodovia Taufik Germano, 3013, Cachoeira do Sul 96503-205, Brazil; (P.d.M.); (E.R.)
| | - Erich Rodríguez
- Department of Structures and Civil Construction, UFSM—Federal University of Santa Maria, Coordenadoria Acadêmica, Rodovia Taufik Germano, 3013, Cachoeira do Sul 96503-205, Brazil; (P.d.M.); (E.R.)
| | - Sergio Neves Monteiro
- Military Engineering Institute, IME—Materials Science Program, Praça Gen. Tibúrcio, 80, Urca, Rio de Janeiro 22290-270, Brazil;
| | - Afonso R. G. de Azevedo
- LECIV—Civil Engineering Laboratory, UENF—State University of the Northern Rio de Janeiro, Av. Alberto Lamego, 2000, Campos dos Goytacazes 28013-602, Brazil
- Correspondence:
| |
Collapse
|
15
|
Amin MN, Ahmad I, Iqbal M, Abbas A, Khan K, Faraz MI, Alabdullah AA, Ullah S. Computational AI Models for Investigating the Radiation Shielding Potential of High-Density Concrete. Materials 2022; 15:4573. [PMID: 35806698 PMCID: PMC9267220 DOI: 10.3390/ma15134573] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/05/2022] [Revised: 06/22/2022] [Accepted: 06/25/2022] [Indexed: 11/29/2022]
Abstract
Concrete is an economical and efficient material for attenuating radiation. The potential of concrete in attenuating radiation is attributed to its density, which in turn depends on the mix design of concrete. This paper presents the findings of a study conducted to evaluate the radiation attenuation with varying water-cement ratio (w/c), thickness, density, and compressive strength of concrete. Three different types of concrete, i.e., normal concrete, barite, and magnetite containing concrete, were prepared to investigate this study. The radiation attenuation was calculated by studying the dose absorbed by the concrete and the linear attenuation coefficient. Additionally, artificial neural network (ANN) and gene expression programming (GEP) models were developed for predicting the radiation shielding capacity of concrete. A correlation coefficient (R), mean absolute error (MAE), and root mean square error (RMSE) were calculated as 0.999, 1.474 mGy, 2.154 mGy and 0.994, 5.07 mGy, 5.772 mGy for the training and validation sets of the ANN model, respectively. Similarly, for the GEP model, these values were recorded as 0.981, 13.17 mGy, and 20.20 mGy for the training set, whereas the validation data yielded R = 0.985, MAE = 12.2 mGy, and RMSE = 14.96 mGy. The statistical evaluation reflects that the developed models manifested close agreement between experimental and predicted results. In comparison, the ANN model surpassed the accuracy of the GEP models, yielding the highest R and the lowest MAE and RMSE. The parametric and sensitivity analysis revealed the thickness and density of concrete as the most influential parameters in contributing towards radiation shielding. The mathematical equation derived from the GEP models signifies its importance such that the equation can be easily used for future prediction of radiation shielding of high-density concrete.
Collapse
|
16
|
Mayhoub OA, Abadel AA, Alharbi YR, Nehdi ML, de Azevedo ARG, Kohail M. Effect of Polymers on Behavior of Ultra-High-Strength Concrete. Polymers (Basel) 2022; 14:polym14132585. [PMID: 35808631 PMCID: PMC9269284 DOI: 10.3390/polym14132585] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/29/2022] [Revised: 06/18/2022] [Accepted: 06/24/2022] [Indexed: 02/06/2023] Open
Abstract
The development of ultra-high-performance concrete (UHPC) is still practically limited due to the scarcity of robust mixture designs and sustainable sources of local constituent materials. This study investigates the engineering characteristics of Styrene Butadiene Rubber (SBR) polymeric fiber-reinforced UHPC with partial substitution of cement at 0, 5 and 20 wt.% with latex polymer under steam and air curing techniques. The compressive and tensile strengths along with capillary water absorption and sulfate resistance were measured to evaluate the mechanical and durability properties. Scanning Electron Microscopy (SEM) was carried out to explore the microstructure development and hydration products in the designed mixtures under different curing regimes. The results indicated that the mixtures incorporating 20 wt.% SBR polymer achieved superior compressive strength at later ages. Additionally, the tensile strength of the polymeric UHPC without steel fibers and with 20% polymers was enhanced by 50%, which promotes the development of novel UHPC mixtures in which steel fibers could be partially replaced by polymer, while enhancing the tensile properties.
Collapse
Affiliation(s)
- Ola A. Mayhoub
- Department of Civil Engineering, El Gazera High Institute for Engineering and Technology, Cairo 11571, Egypt;
| | - Aref A. Abadel
- Department of Civil Engineering, College of Engineering, King Saud University, Riyadh 11421, Saudi Arabia;
- Correspondence: (A.A.A.); (M.L.N.)
| | - Yousef R. Alharbi
- Department of Civil Engineering, College of Engineering, King Saud University, Riyadh 11421, Saudi Arabia;
| | - Moncef L. Nehdi
- Department of Civil Engineering, McMaster University, Hamilton, ON L8S 4L8, Canada
- Correspondence: (A.A.A.); (M.L.N.)
| | - Afonso R. G. de Azevedo
- LECIV—Civil Engineering Laboratory, UENF—State University of the Northern Rio de Janeiro, Av. Alberto Lamego, 2000, Campos dos Goytacazes, Rio de Janeiro 28013-602, RJ, Brazil;
| | - Mohamed Kohail
- Structural Engineering Department, Faculty of Engineering, Ain Shams University, Cairo 11535, Egypt;
| |
Collapse
|
17
|
Tang L, Tian W, Guan D, Chen Z. Experimental Study of Emulative Precast Concrete Beam-to-Column Connections Locally Reinforced by U-Shaped UHPC Shells. Materials (Basel) 2022; 15:ma15124066. [PMID: 35744125 PMCID: PMC9228349 DOI: 10.3390/ma15124066] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/11/2022] [Revised: 06/01/2022] [Accepted: 06/02/2022] [Indexed: 11/22/2022]
Abstract
Precast beam–column connections act as vital elements of precast concrete frames. To enhance the resistance to the earthquake-induced damage and environment-induced deterioration of precast beam–column connections, an innovative precast concrete beam-to-column connection locally enhanced by prefabricated ultra-high-performance concrete (UHPC) shells was proposed. For studying the seismic behaviors of these novel connections and the influence caused by the prefabricated UHPC shell length, full-scale precast specimens were experimentally investigated using low-cyclic reversed loading tests. The obtained results were analyzed and discussed, including hysteresis curves, skeleton curves, strength and deformability, performance degradation, energy dissipation capacities, and plastic hinge length. The results reveal that the novel precast concrete beam–column connections with UHPC shells behaved satisfactorily under seismic loadings. The damage in the concrete near the lower part of the beam end is reduced by the prefabricated UHPC shells. The longer prefabricated UHPC shells were more useful for decreasing the damage to the precast concrete components and improved the structural performance. The precast specimen with 600-mm long UHPC shells can achieve a ductility of 4.87 and 4.0% higher strength than the monolithic reference specimen.
Collapse
Affiliation(s)
- Lei Tang
- School of Civil Engineering, Southeast University, Nanjing 211189, China; (L.T.); (W.T.); (Z.C.)
| | - Wenhua Tian
- School of Civil Engineering, Southeast University, Nanjing 211189, China; (L.T.); (W.T.); (Z.C.)
| | - Dongzhi Guan
- School of Civil Engineering, Southeast University, Nanjing 211189, China; (L.T.); (W.T.); (Z.C.)
- Key Laboratory of Concrete and Prestressed Concrete Structure of Ministry of Education, Southeast University, Nanjing 211189, China
- Correspondence: or
| | - Zixuan Chen
- School of Civil Engineering, Southeast University, Nanjing 211189, China; (L.T.); (W.T.); (Z.C.)
| |
Collapse
|
18
|
Yang J, Chen B, Su J, Xu G, Zhang D, Zhou J. Effects of fibers on the mechanical properties of UHPC: A review. Journal of Traffic and Transportation Engineering (English Edition) 2022. [DOI: 10.1016/j.jtte.2022.05.001] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
19
|
Wu H, Liu K, Yang F, Shen B, Ma K, Zhang J, Liu B. Experimental Mechanical Properties and Numerical Simulation of C80 Concrete with Different Contents of Stone Powder. Materials (Basel) 2022; 15:3282. [PMID: 35591616 DOI: 10.3390/ma15093282] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/25/2022] [Revised: 04/27/2022] [Accepted: 04/28/2022] [Indexed: 12/10/2022]
Abstract
In this paper, we show the influence of stone powder content on the mechanical properties of concrete by experiments and numerical simulations. In numerical simulation, this paper proposed a method whereby the stone powder in the numerical simulation of concrete is considered by the mechanical performances of mortar with the stone powder. The results of numerical models established based on inclusion theory and random aggregate distribution were basically consistent with the experiment, which indicated that the simulation method of concrete under different stone powder was feasible. In the range of stone powder content from 0% to 15%, the model based on inclusion theory is very close to the experimental results, and the model based on 2D random aggregate distribution is closer to the experimental value once the stone powder content is 7%. The research showed that with increased stone powder, cubic compressive strength had greater dispersion between the simulation and the experiment; axial compressive and split tensile strength reached the best levels at 5%. The best stone powder content was 5% for C80 high-strength concrete by comprehensively considering concrete's consistency and its mechanical properties.
Collapse
|
20
|
Liu G, Zhang H, Liu J, Xu S, Chen Z. Experimental Study on the Salt Freezing Durability of Multi-Walled Carbon Nanotube Ultra-High-Performance Concrete. Materials (Basel) 2022; 15:3188. [PMID: 35591521 DOI: 10.3390/ma15093188] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/18/2022] [Revised: 04/07/2022] [Accepted: 04/09/2022] [Indexed: 11/17/2022]
Abstract
Ultra-high-performance concrete (UHPC) is a new type of high-performance cement-based composite. It is widely used in important buildings, bridges, national defense construction, etc. because of its excellent mechanical properties and durability. Freeze thaw and salt erosion damage are one of the main causes of concrete structure failure. The use of UHPC prepared with multi-walled carbon nanotubes (MWCNTs) is an effective method to enhance the durability of concrete structures in complex environments. In this work, the optimal mix proportion based on mechanical properties was obtained by changing the content of MWCNTs and water binder ratio to prepare MWCNTs UHPC. Then, based on the changes in the compressive strength, mass loss rate, and relative dynamic modulus of elasticity (RDME), the damage degree of concrete under different salt erosion during 1500 freeze-thaw (FT) cycles was analyzed. The changes in the micro pore structure were characterized by scanning electron microscope (SEM) and nuclear magnetic resonance (NMR). The test results showed that the optimum mix proportion at the water binder ratio was 0.19 and 0.1% MWCNTs. At this time, the compressive strength was 34.1% higher and the flexural strength was 13.6% higher than when the MWCNTs content was 0. After 1500 salt freezing cycles, the appearance and mass loss of MWCNTs-UHPC prepared according to the best ratio changed little, and the maximum mass loss was 3.18%. The higher the mass fraction of the erosion solution is, the lower the compressive strength and RDME of concrete after FT cycles. The SEM test showed that cracks appeared in the internal structure and gradually increased due to salt freezing damage. However, the microstructure of the concrete was still relatively dense after 1500 salt freezing cycles. The NMR test showed that the salt freezing cycle has a significant influence on the change in the small pores, and the larger the mass fraction of the erosion solution, the smaller the change in the proportion of pores. After 1500 salt freezing cycles, the samples did not fail, which shows that MWCNTs UHPC with a design service life of 150 years has good salt freezing resistance under the coupling effect of salt corrosion and the FT cycle.
Collapse
|
21
|
Stel’makh SA, Shcherban’ EM, Beskopylny AN, Mailyan LR, Meskhi B, Butko D, Smolyanichenko AS. Influence of Composition and Technological Factors on Variatropic Efficiency and Constructive Quality Coefficients of Lightweight Vibro-Centrifuged Concrete with Alkalized Mixing Water. Applied Sciences 2021; 11:9293. [DOI: 10.3390/app11199293] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/10/2023]
Abstract
Alkalization technology and its application to obtain high-performance concrete compositions is an urgent scientific problem that opens opportunities for improving building structures. The article is devoted to the new technology of manufacturing reinforced concrete structures with low energy consumption, resource, and labor intensity based on the improved variatropic configuration of vibro-centrifuged concrete using activated water with high pH. The synergistic effect of the joint use of the proposed novel solutions has been theoretically and experimentally proved. Thus, growth in physical and mechanical characteristics of up to 15–20% was obtained, the structure and its operational ability were improved (the effectiveness of structural improvement, expressed as a percentage, reached values over 70%, concerning control samples). A positive effect on the properties of vibro-centrifuged concrete over the entire thickness of the annular section has been revealed. A method for controlling the integral characteristics of concrete has been obtained. The possibility of regulating the variatropic structure and controlling the differential characteristics of vibro-centrifuged concrete has been established. An assessment of the constructive quality and variatropic efficiency of vibro-centrifuged concrete was carried out, and new calculated dependencies were proposed, expressed in the form of relative coefficients.
Collapse
|