Surface Characterization and Anti-Biofilm Effectiveness of Hybrid Films of Polyurethane Functionalized with Saponite and Phloxine B

Titanium-Dioxide-Nanoparticle-Embedded Polyelectrolyte Multilayer as an Osteoconductive and Antimicrobial Surface Coating

Bioactive surface coatings have retained the attention of researchers and physicians due to their versatility and range of applications in orthopedics, particularly in infection prevention. Antibacterial metal nanoparticles (mNPs) are a promising therapeutic, with vast application opportunities on orthopedic implants. The current research aimed to construct a polyelectrolyte multilayer on a highly porous titanium implant using alternating thin film coatings of chitosan and alginate via the layer-by-layer (LbL) self-assembly technique, along with the incorporation of silver nanoparticles (AgNPs) or titanium dioxide nanoparticles (TiO2NPs), for antibacterial and osteoconductive activity. These mNPs were characterized for their physicochemical properties using quartz crystal microgravimetry with a dissipation system, nanoparticle tracking analysis, scanning electron microscopy, and atomic force microscopy. Their cytotoxicity and osteogenic differentiation capabilities were assessed using AlamarBlue and alkaline phosphatase (ALP) activity assays, respectively. The antibiofilm efficacy of the mNPs was tested against Staphylococcus aureus. The LbL polyelectrolyte coating was successfully applied to the porous titanium substrate. A dose-dependent relationship between nanoparticle concentration and ALP as well as antibacterial effects was observed. TiO2NP samples were also less cytotoxic than their AgNP counterparts, although similarly antimicrobial. Together, these data serve as a proof-of-concept for a novel coating approach for orthopedic implants with antimicrobial and osteoconductive properties.

Evaluation of Listeria monocytogenes biofilms attachment and formation on different surfaces using a CDC biofilm reactor

Listeria monocytogenes can adapt, persist, and form biofilms on food premises surfaces, representing a challenge for food safety, since they led to disease transmission, food contamination and spoilage during production. Physical interventions (scrubbing and wiping) can help controlling formation, nevertheless when biofilms are formed, they are usually very resistant to current control strategies used in the food industry. Biofilm attachment and formation is influenced by environment characteristics, substrate properties and microbial motility. The purpose of this study was to evaluate the ability of L. monocytogenes to attach and form biofilms on different surfaces (wood, nylon, and polycarbonate) representative of the materials used during produce harvesting and storage. Multi-strain L. monocytogenes biofilms were grown in a CDC Biofilm reactor at 20 ± 2 °C up to 96-h and characterized for: a) attachment strength by enumerating cells after rinsing; b) hydrophobicity and interfacial tension by contact angle measurements; c) biofilm architecture by Laser Scanning Confocal Microscopy. All experiments were done in triplicate. Material, incubation, and solvent significantly affected the hydrophobicity and wetting properties of L. monocytogenes biofilms (P < 0.05). The type of material and incubation time significantly influenced hydrophobicity and wetting properties of L. monocytogenes biofilms (P < 0.05). Highest contact angle and lowest interfacial tension were observed on polycarbonate coupons. The data presented contributes to understanding Listeria biofilms grow on different surfaces commonly used in produce harvesting and storage. The data obtained in this study can be used when evaluating intervention strategies to control this pathogen in food premises.

Effect of Quorum Sensing Molecule Farnesol on Mixed Biofilms of Candida albicans and Staphylococcus aureus

The natural bioactive molecule farnesol (FAR) is widely studied mainly for its antibiofilm and antimicrobial properties. In addition, it increases the effectiveness of some antimicrobial substances, which makes it interesting for the development of combined therapy. In the present work, the effect of FAR either alone or in combination with oxacillin (OXA) on mixed biofilms formed by clinically relevant pathogens, Candida albicans and Staphylococcus aureus, was studied. S. aureus isolates used for biofilm formation originated from blood cultures and central venous catheters (CVC) were characterized in terms of antimicrobial resistance. The minimal biofilm inhibitory concentration (MBIC50) for FAR of 48 h mixed biofilms formed by the C. albicans and methicillin-sensitive S. aureus (MSSA) was determined to be 125 μM, and for the mixed biofilms with methicillin-resistant S. aureus (MRSA) was determined to be 250 μM. Treatment of mixed biofilms with OXA (2 mg/mL) showed ≤4% inhibition; however, the combination of OXA (2 mg/mL) and FAR (300 μM) resulted in 80% inhibition of biofilms. In addition, planktonic cells of S. aureus exhibited an increased susceptibility to OXA, cefoxitin and kanamycin in the presence of FAR (150 and 300 μM). Scanning electron microscopy (SEM) micrographs confirmed patchy biofilm and lack of candidal hyphae in the samples treated with FAR and FAR/OXA in comparison to control and mixed biofilms treated only with OXA. Intriguingly, in a pilot experiment using fluorescence in situ hybridization (FISH), considerable differences in activity (as indicated by ribosome content) of staphylococcal cells were detected. While the activity rate of the staphylococci in mixed biofilms treated with FAR was high, no FISH-positive signal for staphylococcal cells was found in the biofilm treated with FAR/OXA.

Adsorption of Dye Molecules and Its Potential for the Development of Photoactive Hybrid Materials Based on Layered Silicates

The present paper gives a brief account of the latest advances in understanding of the mechanism and implications of dye adsorption with a special focus on layered silicate surfaces. It has been clearly demonstrated that the controlled adsorption of novel or already well-known dyes has equally great yet unexplored potential. In principle, the well-engineered surface confinement of the molecules may lead to their aggregation, adsorption, or intercalation-induced fluorescence emission even with conventional dyes, which are not considered as luminophores in solutions or in the solid state. We envision the utilization of silicate-based heterogeneous systems to produce novel polymer blended films or structured liquids, as well as to develop a plethora of other photophysical and biomedical applications.

Functionalised Mineral Materials in Environmental and Civil Engineering, Ceramics, Foundries and Metals

There has been increasing interest in functionalised mineral materials in terms of both scientific research and the development of the world economy [...].

Modified Polymer Surfaces: Thin Films of Silicate Composites via Polycaprolactone Melt Fusion

Polymer/layered silicate composites have gained huge attention in terms of research and industrial applications. Traditional nanocomposites contain particles regularly dispersed in a polymer matrix. In this work, a strategy for the formation of a composite thin film on the surface of a polycaprolactone (PCL) matrix was developed. In addition to the polymer, the composite layer was composed of the particles of saponite (Sap) modified with alkylammonium cations and functionalized with methylene blue. The connection between the phases of modified Sap and polymer was achieved by fusing the chains of molten polymer into the Sap film. The thickness of the film of several μm was confirmed using electron microscopy and X-ray tomography. Surfaces of precursors and composite materials were analyzed in terms of structure, composition, and surface properties. The penetration of polymer chains into the silicate, thus joining the phases, was confirmed by chemometric analysis of spectral data and changes in some properties upon PCL melting. Ultimately, this study was devoted to the spectral properties and photoactivity of methylene blue present in the ternary composite films. The results provide directions for future research aimed at the development of composite materials with photosensitizing, photodisinfection, and antimicrobial surfaces.