Physicochemical Characterization of Cherry Pits-Derived Biochar

Environmental risks and agronomic benefits of industrial sewage sludge-derived biochar

The main objective of the present work was to assess the ecotoxicological safety of the use of thermochemically treated sewage sludge from the wastewater treatment plant (WWTP) of a distillery plant as a soil additive in agricultural soils based on its physicochemical characteristics and the bioaccumulation of selected elements in the plant tissues of maize (Zea mays). We have carried out physicochemical characterization (pH, EC, Corg, Cinorg, CEC, N, H, ash content, PAHs) of sewage sludge feedstock (SS) and sludge-derived biochar (BC) produced by slow pyrolysis at a temperature of 400 °C. The effect of 1% (w/w) amendment of SS and BC on soil physicochemical properties (pH, EC, Cinorg), germination of ryegrass, soil rhizobacteria and microorganisms, as well as on the accumulation and translocation of selected elements in maize (Zea mays) was studied. The results show that pyrolysis treatment of distillery WWTP sludge at 400 °C increases pH (from 7.3 to 7.7), Corg(from 28.86% to 36.83%), N (from 6.19% to 7.53%), ash content (from 23.59% to 50.99%) and decreases EC (from 2.35 mS/cm to 1.06 mS/cm), CEC (from 118.66 cmol/kg to 55.66 cmol/kg), H (from 6.76% to 1.98%) and Σ18 PAHs content (from 4.03 mg/kg to 3.38 mg/kg). RFA analysis of SS and BC showed that pyrolysis treatment multiplies chromium (Cr) (2.2 times), nickel (Ni) (2.96 times), lead (Pb) (2.13 times), zinc (Zn) (2.79 times), iron (Fe) (1.26 times) in the obtained BC, but based on an ecotoxicological test with earthworms Eisenia fetida, we conclude that pyrolysis treatment reduced the amount of available forms of heavy metals in BC compared to SS. We demonstrated by a pot experiment with a maize that a 1% addition of BC increased soil pH, decreased EC and Cinorg and had no significant effect on heavy metal accumulation in plant tissues. According to the results of the three-level germination test, it also does not affect the germination of cress seeds (Lepidium sativum). There was a significant effect of 1% BC addition on soil microbial community, and we observed a decrease in total microbial biomass and an increase in fungal species variability in the soil. Based on these results, we conclude that BC represents a promising material that can serve as a soil additive and source of nutritionally important elements after optimization of the pyrolysis process.

Materials for Heavy Metals Removal from Waters

Although heavy metal ions are naturally present in the environment, their concentrations have significantly increased due to industrial activities [...].

Rice Husk Cellulose-Based Adsorbent to Extract Rare Metals: Preparing and Properties

Adsorption is one of the common stages in the hydrometallurgy of rare metals. Its efficiency is largely determined by the quality of the sorbent used. The purpose of this work was to create an activated sorbent based on rice husk cellulose for the extraction of rhenium from aqueous solutions. Two types of cellulose were obtained by treating rice husk with a 1.5% NaOH solution (alkaline cellulose) and a nitric acid solution in ethyl alcohol (Kürschner and Hoffer cellulose). They were tested by IR, SEM, TA, TPD-MS, and XRD methods. It was found that Kürschner and Hoffer cellulose does not contain lignin and retains structural order to a greater extent. By means of this cellulose carbonization at 600 °C and activation by physical, chemical, and combined methods, a series of sorbents were prepared and studied by different methods. It was determined that the sorbent KHC4-600VA obtained by combined activation of cellulose carbonizate by water vapor at 850 °C, followed by an alkaline treatment, has the best textural characteristics: S-~1200 m2·g-1, V-1.22 cm3·g-1, and R-2.05 nm. KHC4-600VA provides 90% recovery of Re (VII) ions from aqueous solutions. According to the Freundlich model, sorption proceeds favorably on the sorbent's heterogeneous surface.

Pristine biochar performance investigation to remove metals in primary and secondary treated municipal wastewater for groundwater recharge application

In this study, pristine biochar derived from date palm at 500°C was used in batch reactors (simulating blending adsorbent in aeration tank) and fixed-bed columns (simulating holding adsorbent in fixed-bed reactors). The removal performance of the biochar was assessed toward single and mixed-metal solutions as well as synthetic primary and secondary treated wastewater for copper (Cu2+), iron (Fe2+), nickel (Ni2+) and zinc (Zn2+). The order of maximum adsorption capacities of the metal ions at pH 7 followed: Fe2+ (2.92/2.94 mg/g)>Cu2+(2.69/2.78 mg/g) >Zn2+(2.03/2.19 mg/g)>Ni2+(1.69/1.02 mg/g) in single/mixed-metal solutions and Zn2+(2.91/11.26 mg/g)>Fe2+(0.60/5.29 mg/g)>Cu2+(0.56/5.05 mg/g)>Ni2+(0.13/2.02 mg/g) in synthetic primary/secondary treated wastewater. Blending biochar in aeration tank reduced metal concentrations. The metal ion concentrations in the final effluent were below the World Health Organization drinking water limits (2, 0.3, 0.1 and 3 mg/L for Cu2+, Fe2+, Ni2+ and Zn2+, respectively) suggesting that treated secondary wastewater can be spread into potable aquifers following disinfection. The Freundlich and the Pseudo-second order models fit best the batch experimental data. Experimental data from column analysis fit well to the Thomas model. The adsorption of metal ions on the surface of biochar was confirmed by Scanning electron microscopy, Energy dispersive X-ray studies, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and X-ray diffraction. Desorption studies using different eluents demonstrated the reusability potential of the studied biochar.