Rheological Properties of Different Graphene Nanomaterials in Biological Media

Pipette-operable microfluidic devices with hydrophobic valves in sequential dispensing with various liquid samples: multiplex disease assay by RT-LAMP

Microfluidic dispensing technologies often require additional equipment, posing challenges for their integration into point-of-care testing (POCT) applications. In response to this challenge, we have developed a pipette-operable microfluidic device fabricated using 3D printing technology for precise liquid dispensing. This device features three reaction chambers and three distinct hydrophobic valves to control the flow direction of liquids. Through these valves, the pipette-operable microfluidic device can sequentially dispense and isolate the liquid into the three reaction chambers, allowing for the individual conduction of three distinct reactions. These hydrophobic valves, with optimized flow resistance and burst pressure, can sustain a volumetric flow rate of up to 25 μL s-1, making them compatible with a standard pipette, a syringe, or a dropper operation. Furthermore, the device is successfully used to operate with various liquids, including BSA, DMEM, FBS, plasma, and blood, representing that the device has the potential to be used for various applications. Additionally, distinct RT-LAMP primer sets have been incorporated for diagnosing SARS-CoV-2, influenza A, and influenza B within each chamber through lyophilization. This pipette-operable microfluidic device serves as a versatile tool for diagnosing these three diseases using a single loading process, with results readable by the naked eye or image assay within 30 minutes of incubation. Finally, the design concepts are extended to engineer a microfluidic device with 20 reaction chambers, offering significant potential for multi-disease diagnostics.

Impact of the Curing Temperature on the Manufacturing Process of Multi-Nanoparticle-Reinforced Epoxy Matrix Composites

This study aims to analyze the effect of the curing temperature of nano-reinforcements during the manufacturing process on the mechanical properties of composites involving graphene (GNP), carbon nanofibers (CNFs), and a hybrid mixture of these two nanoparticles. In this context, the type of nanoparticles, their content, their type of resin, and their hybridization were considered. The results showed that both nanoparticles increased the viscosity of the resin suspension, with an increase of between 16.3% and 38.2% for GNP nanoparticles and 45.4% and 74% for CNFs depending on the type of resin. Shrinkage was also affected by the addition of nanoparticles, as the highest results were obtained with GNP nanoparticles, with a 91% increase compared with the neat resin, and the lowest results were obtained with CNFs, with a decrease of 77% compared with the neat resin. A curing temperature of 5 °C promoted the best bending and hardness performance for all composites regardless of the type of resin and reinforcement used, with improvements of up to 24.8% for GNP nanoparticles and 13.52% for CNFs compared with the neat resin at 20 °C. Hybridization led to further improvements in bending properties and hardness compared with single-reinforcement composites due to a synergistic effect. However, the effectiveness of hybridization depends on the type of resin.

Stability Study of Graphene Oxide-Bovine Serum Albumin Dispersions

In this work, a stability study of dispersions of graphene oxide and graphene oxide functionalized with polyethylene glycol (PEG) in the presence of bovine serum albumin is carried out. First, a structural characterization of these nanomaterials is performed by scanning electron microscopy, atomic force microscopy, and ultraviolet visible spectroscopy, comparing the starting nanomaterials with the nanomaterials in contact with the biological material, i.e., bovine fetal serum. The different experiments were performed at different concentrations of nanomaterial (0.125-0.5 mg/mL) and BSA (0.01-0.04 mg/mL), at different incubation times (5-360 min), with and without PEG, and at different temperatures (25-40 °C). The SEM results show that BSA is adsorbed on the surface of the graphene oxide nanomaterial. Using UV-Vis spectrophotometry, the characteristic absorption peaks of BSA are observed at 210 and 280 nm, corroborating that the protein has been adsorbed. When the time increases, the BSA protein can be detached from the nanomaterial due to a desorption process. The stability of the dispersions is reached at a pH between 7 and 9. The dispersions behave like a Newtonian fluid with viscosity values between 1.1 and 1.5 mPa·s at a temperature range of 25 to 40 °C. The viscosity values decrease as the temperature increases.