Theoretical and Experimental Study of the Effect of Plasma Characteristics on the Mechanical Properties of Ihram Cotton Fabric

Improving the Mechanical, Thermoelectric Insulations, and Wettability Properties of Acrylic Polymers: Effect of Silica or Cement Nanoparticles Loading and Plasma Treatment

The acrylic polymer composites in this study are made up of various weight ratios of cement or silica nanoparticles (1, 3, 5, and 10 wt%) using the casting method. The effects of doping ratio/type on mechanical, dielectric, thermal, and hydrophobic properties were investigated. Acrylic polymer composites containing 5 wt% cement or silica nanoparticles had the lowest abrasion wear rates and the highest shore-D hardness and impact strength. The increase in the inclusion of cement or silica nanoparticles enhanced surface roughness, water contact angle (WCA), and thermal insulation. Acrylic/cement composites demonstrated higher mechanical, electrical, and thermal insulation properties than acrylic/silica composites because of their lower particle size and their low thermal/electrical conductivity. Furthermore, to improve the surface hydrophobic characteristics of acrylic composites, the surface was treated with a dielectric barrier discharge (DBD) plasma jet. The DBD plasma jet treatment significantly enhanced the hydrophobicity of acrylic polymer composites. For example, the WCA of acrylic composites containing 5 wt% silica or cement nanoparticles increased from 35.3° to 55° and 44.7° to 73°, respectively, by plasma treatment performed at an Ar flow rate of 5 L/min and for an exposure interval of 25 s. The DBD plasma jet treatment is an excellent and inexpensive technique for improving the hydrophobic properties of acrylic polymer composites. These findings offer important perspectives on the development of materials coating for technical applications.

Energy Recovery and Economic Evaluation for Industrial Fuel from Plastic Waste

Plasma gasification is considered an environmentally friendly process to convert plastic waste into fuel oil; a prototype system is described to test and validate the plasma treatment of plastic waste as a strategic vision. The proposed plasma treatment project will deal with a plasma reactor with a waste capacity of 200 t/day. The annual plastic waste production in tons in all regions of Makkah city during 27 years for all months in the years 1994 to 2022 is evaluated. A statistics survey of plastic waste displays the average rate generation ranging from 224 thousand tons in the year 1994 to 400 thousand tons in the year 2022, with an amount of recovered pyrolysis oil; 3.17 × 10⁵ t with the equivalent energy; 12.55 × 10⁹ MJ, and an amount of recovered diesel oil; 2.7 × 10⁵ t with an amount of electricity for sale 2.96 × 10⁶ MW.h. The economic vision will be estimated, using the results of energy generated from diesel oil as an industrial fuel extracted from plastic waste equivalent to 0.2 million barrels of diesel oil, with sales revenue and cash recovery of USD 5 million, considering the sale of each one barrel of diesel extracted from plastic waste in the range of USD 25. It is important to consider that the equivalent barrels of petroleum cost, according to the organization of the petroleum-exporting countries' basket prices, up to USD 20 million. The sales profit (2022) is as follows: for diesel with a sales revenue of diesel oil, USD 5 million, with a rate of return of 4.1%, and a payback period of 3.75 years. The generated electricity reached USD 32 million for households and USD 50 million for factories.