Progress on Optical Fiber Biochemical Sensors Based on Graphene

Unveiling with Density Functional Theory the Optical Property Variations of Three Kinds of Graphene for Acetaminophen Sensor Design

Understanding the interactions between molecules and sensing elements is crucial to improving sensors. We present one step toward getting closer to the breach between theory and empirical sensor development. Through density functional theory (DFT) calculations, we explored the changes in some optical properties of pristine graphene (G), graphene oxide (GO), and reduced graphene oxide (rGO) interacting with one molecule of acetaminophen (APAP). The main goal is to unveil which graphene-G, GO, and rGO-works better as a substrate to detect APAP for sensor applications based on UV/vis and near-infrared absorption, refractive index changes, and plasmon resonances. For this effort, we used Quantum ESPRESSO software. We calculated each supercell's adsorption energy and recovery time containing the APAP and one graphene variant. Afterward, we calculated the optical absorption, refractive index, reflectivity, and electron energy loss spectroscopy (EELS), a technique to identify the material's plasmons. Then, we analyzed the changeovers in the optical properties mentioned for each graphene layer with and without APAP. We found that G works for UV/vis and plasmon sensors operating in blue and UV-C regions; GO has the highest performance range in UV/vis and plasmonic sensors operating in UV-C; rGO has the highest performance range in UV/vis sensors working on near-infrared and UV-C. Additionally, rGO plasmonic sensors present an "oscillation of percentage variations" from visible to UV. Our study offers a strategy for creating a map to select the best substrate to develop selective APAP optical sensors.

Topic Editorial on Fiber-Optic Sensors

Fiber-optic sensors are highly significant in modern technology due to their unique abilities and versatility [...].

Renewable regeneration optic fiber glucose sensor based on succinylaminobenzenoboronic acid modified excessively tilted fiber grating

BACKGROUND

Optical fiber sensors have been used to detect glucose owing to advantages such as low cost, small size, and ease of operation etc. phenylboronic acid is one of the commonly used receptors for glucose detection, however phenylboronic acid based regenerative optical fiber sensors are commonly cumulative regeneration, renewable regeneration sensor has been missing from the literature.

RESULTS

In this work, instead of using phenylboronic acid, we synthesized succinylaminobenzenoboronic acid molecule (BPOA) by introducing a short chain containing carboxyl group at the other end of phenylboronic acid then covalently bonded BPOA on the surface of excessively tilted fiber grating (Ex-TFG). This provides a very stable platform for renewable regeneration and the regenerative buffer was also optimized. The proposed renewable regeneration method exhibited higher linearity and sensitivity (R2 = 0.9992, 8 pm/mM) in relative to the conventional cumulative regeneration method (R2 = 0.9718, 4.9 pm/mM). The binding affinity between BPOA and glucose was found to be almost constant over 140 bind/release cycles with a variation of less than 0.3 % relative standard deviation.

SIGNIFICANCE

The regenerative and label-free sensing capacity of the proposed device provides a theoretical foundation for label-free saccharide detection and the development of wearable glucose monitoring devices based on fiber optic sensors.

Point-of-care diagnosis of pre-eclampsia based on microfiber Bragg grating biosensor

Pre-eclampsia is a serious multi-organ complication that severely threatens the safety of pregnant women and infants. To accurate and timely diagnose pre-eclampsia, point-of-care (POC) biosensing of the specific biomarkers is urgently required. However, one of the key biomarkers of pre-eclampsia, placental growth factor (PlGF), has a reduced level of expression in patients, which challenges the quantification capability and Limit-of-detection (LOD) of biosensors. Herein, we reported a microfiber Bragg grating biosensor for the quantification of PlGF in clinical serum samples. The Bragg grating was inscribed in a unilateral tapered fiber to generate the segmented Fabry-Perot spectrum for improving the capability of detection. Furthermore, a temperature-calibrated Bragg grating was added to enable dual parametric detection of PlGF and temperature simultaneously for removing the crosstalk. Finally, the biosensor was envisaged to be perfectly compatible with microfluidic chips, and thus dramatically reducing the sample consumption to as small as 10 μL. The proposed biosensor can respond to PlGF with concentrations ranging from 5 to 120 pg mL-1, attaining a LOD of 5 pg mL-1 of clinical relevance. More importantly, the biosensor achieved micro volume detection of clinical serum samples from patients, and the ROC curve with an AUC of 0.977 confirmed the viability of the device. Our study paves the way to a new idea for cost-effective and high-precision screening of patients with pre-eclampsia, and hence envisages a promising prospect for point-of-care (POC) diagnosis of patients with pre-eclampsia.

Optical Fibre-Based Sensors-An Assessment of Current Innovations

Optical fibre sensors are an essential subset of optical fibre technology, designed specifically for sensing and measuring several physical parameters. These sensors offer unique advantages over traditional sensors, making them gradually more valuable in a wide range of applications. They can detect extremely small variations in the physical parameters they are designed to measure, such as analytes in the case of biosensing. This high sensitivity allows them to detect subtle variations in temperature, pressure, strain, the refractive index of analytes, vibration, and other environmental factors with exceptional accuracy. Moreover, these sensors enable remote sensing capabilities. Since light signals are used to carry information, the sensing elements can be placed at distant or inaccessible sites and still communicate the data back to the central monitoring system without signal degradation. In recent times, different attractive configurations and approaches have been proposed to enhance the sensitivity of the optical fibre-based sensor and are briefly explained in this review. However, we believe that the choice of optical fibre sensor configuration should be designated based on the specific application. As these sensors continue to evolve and improve, they will play an increasingly vital role in critical monitoring and control applications across various industries.

A Density Functional Theory (DFT) Perspective on Optical Absorption of Modified Graphene Interacting with the Main Amino Acids of Spider Silk

We investigated the possible adsorption of each of the main building blocks of spider silk: alanine, glycine, leucine, and proline. This knowledge could help develop new biocompatible materials and favors the creation of new biosensors. We used ab initio density functional theory methods to study the variations in the optical absorption, reflectivity, and band structure of a modified graphene surface interacting with these four molecules. Four modification cases were considered: graphene with vacancies at 5.55% and fluorine, nitrogen, or oxygen doping, also at 5.55%. We found that, among the cases considered, graphene with vacancies is the best candidate to develop optical biosensors to detect C=O amide and differentiate glycine and leucine from alanine and proline in the visible spectrum region. Finally, from the projected density of states, the main changes occur at deep energies. Thus, all modified graphene's electronic energy band structure undergoes only tiny changes when interacting with amino acids.

Ultrasensitive refractive index fiber sensor based on high-order harmonic Vernier effect and a cascaded FPI

This paper proposes and demonstrates an ultrasensitive refractive index (RI) sensor based on harmonic Vernier effect (HEV) and a cascaded Fabry-Perot interferometer (FPI). The sensor is fabricated by sandwiching a hollow-core fiber (HCF) segment between a lead-in single-mode fiber (SMF) pigtail and a reflection SMF segment with an offset of 37 µm between two fiber centers to form a cascaded FPI structure, where the HCF is the sensing FPI, and the reflection SMF is the reference FPI. To excite the HEV, the optical path of the reference FPI must be multiple times (>1) that of the sensing FPI. Several sensors have been made to conduct RI measurements of gas and liquid. The sensor's ultrahigh RI sensitivity of up to ∼378000 nm/RIU can be achieved by reducing the detuning ratio of the optical path and increasing the harmonic order. This paper also proved that the proposed sensor with a harmonic order of up to 12 can increase the fabricated tolerances while achieving high sensitivity. The large fabrication tolerances greatly increase the manufacturing repeatability, reduce production costs, and make it easier to achieve high sensitivity. In addition, the proposed RI sensor has advantages of ultrahigh sensitivity, compactness, low production cost (large fabrication tolerances), and capability to detect gas and liquid samples. This sensor has promising potentials for biochemical sensing, gas or liquid concentration sensing, and environmental monitoring.

Carbon-based biosensors from graphene family to carbon dots: A viewpoint in cancer detection

According to the latest report by International Agency for Research on Cancer, 19.3 million new cancer cases and 10 million cancer deaths were globally reported in 2020. Early diagnosis can reduce these numbers significantly, and biosensors have appeared to be a solution to this problem as, unlike the traditional methods, they have low cost, rapid process, and do not need experts present on site for use. These devices have been incorporated to detect many cancer biomarkers and measure cancer drug delivery. To design these biosensors, a researcher must know about their different types, properties of nanomaterials, and cancer biomarkers. Among all types of biosensors, electrochemical and optical biosensors are the most sensitive and promising sensors for detecting complicated diseases like cancer. The carbon-based nanomaterial family has attracted lots of attention due to their low cost, easy preparation, biocompatibility, and significant electrochemical and optical properties. In this review, we have discussed the application of graphene and its derivatives, carbon nanotubes (CNTs), carbon dots (CDs), and fullerene (C60), for designing different electrochemical and optical cancer-detecting biosensors. Furthermore, the application of these carbon-based biosensors for detecting seven widely studied cancer biomarkers (HER2, CEA, CA125, VEGF, PSA, Alpha-fetoprotein, and miRNA21) is reviewed. Finally, various fabricated carbon-based biosensors for detecting cancer biomarkers and anticancer drugs are comprehensively summarized as well.

Studying the effect of polymethyl methacrylate polymer opticals fibers (POFs) on the performance of composite materials based on the polyether ether ketone (PEEK) polymer matrix

More recently, various techniques have been implemented for the sensors manufacturing purpose, such as fiber Bragg gratings fibers (FBG) that allows variable core refractive index suitable for a large scale of measurements types, fiber optic evanescent waves (FOEW) for water parameters measurement, microstructured and crystal photonic optical fibers, polymers optical fiber (POFs), and so on. In this perspective, the objective of this work is to study the reliability and the origin of the resistance of each fiber-matrix interface of the composite materials PMMA/PEEK, Topas/PEEK, and Topas-Zeonex/PEEK. The genetic simulation is based on the probabilistic approach of Weibull to calculate the damage at the interface by crossing the two damages of the matrix and the fiber respectively. The results show that the PMMA/PEEK composite is the most resistant to the mechanical stresses applied compared to those Topas/PEEK and Topas-Zeonex/PEEK; these results were confirmed by the level of damage to the interface observed for the studied materials. The performed calculations are in good agreement with the analytical results of Cox, where he demonstrated that Young's modulus of fibers have an important influence on the shear strength of the fiber-matrix interface of composite materials. Based on the obtained results, the present study gives the opportunity for the proposed materials (PMMA/PEEK and Zeonex/PEEK) to be as potential candidates for the smart digital applications and telecoms aims.

Studying the effect of polymethyl methacrylate polymer opticals fibers (POFs) on the performance of composite materials based on the polyether ether ketone (PEEK) polymer matrix

More recently, various techniques have been implemented for the sensors manufacturing purpose, such as fiber Bragg gratings fibers (FBG) that allows variable core refractive index suitable for a large scale of measurements types, fiber optic evanescent waves (FOEW) for water parameters measurement, microstructured and crystal photonic optical fibers, polymers optical fiber (POFs), and so on. In this perspective, the objective of this work is to study the reliability and the origin of the resistance of each fiber-matrix interface of the composite materials PMMA/PEEK, Topas/PEEK, and Topas-Zeonex/PEEK. The genetic simulation is based on the probabilistic approach of Weibull to calculate the damage at the interface by crossing the two damages of the matrix and the fiber respectively. The results show that the PMMA/PEEK composite is the most resistant to the mechanical stresses applied compared to those Topas/PEEK and Topas-Zeonex/PEEK; these results were confirmed by the level of damage to the interface observed for the studied materials. The performed calculations are in good agreement with the analytical results of Cox, where he demonstrated that Young's modulus of fibers have an important influence on the shear strength of the fiber-matrix interface of composite materials. Based on the obtained results, the present study gives the opportunity for the proposed materials (PMMA/PEEK and Zeonex/PEEK) to be as potential candidates for the smart digital applications and telecoms aims.