Recent Developments in Generation, Detection and Application of Nanobubbles in Flotation

Synergistic roles of carbon dioxide nanobubbles and biochar for promoting direct CO2 assimilation by plants and optimizing nutrient uptake efficiency

This study investigates the synergistic role of carbon dioxide nanobubbles (CNBs) and biochar (BC) on seed germination, plant growth, and soil quality, employing Solanum lycopersicum (tomato) and Phaseolus vulgaris (beans) as test plant species. CNBs, generated and dispersed in both distilled water (DW) and tap water (TW), exhibited distinct characteristics, with TW-CNBs being larger and more stable (peak values of around 18.17 nm and 299.5 nm, zeta potential (ZP) of -5.91 mV), while DW-CNBs have peak values of around 1.63 nm and 216.1 nm, ZP of -3.23 mV. The results suggest CNBs enhance seed germination by upto 20%. CNBs in BC amended soil further promoted plant height and leaf number. CNBs increased dissolved CO2 levels to 2-24 ppm within 40 min, while BC enriched soil organic carbon from 19.20 to 24.96 ppm in beans and 18.33 to 22.35 ppm in tomatoes. The pH levels decreased from 7.68 to 3.78 for TW-CNBs and from 7.41 to 2.13 for DW-CNBs. Additionally, the electrical conductivity (EC) decreased from 112.1 to 99.6 for TW-CNBs, while it increased from 4.15 to 32.1 for DW-CNBs. Together they significantly increased soil available phosphorus and potassium to 4.03-8.06 and 3.58-7.16 kg ha-1; and 5.67-55.74 and 17.57-43.79 kg ha-1 in bean and tomato, respectively. Variations in nutrient concentrations were observed, with substantial increase in Na (16.27% and 6.58%), Zn (3.39% and 0.46%), and Mg (5.05% and 1.44%) content for beans and tomatoes, respectively. Structural equation model and principal component analysis revealed differences between CNB and BC treated soils, highlighting positive impact on soil quality and plant growth compared to control. Integration of CNBs and BC presents a multifaceted approach to enhance soil quality and promote plant growth, offering promising solutions for sustainable agriculture and environmental management.

An Assessment of the Role of Combined Bulk Micro- and Nano-Bubbles in Quartz Flotation

Bulk micro-nano-bubbles (BMNBs) have been proven to be effective at improving the flotation recovery and kinetics of fine-grained minerals. However, there is currently no research reported on the correlation between the properties of BMNBs and flotation performance. For this purpose, aqueous dispersions with diverse properties were created by altering preparation time (0, 1, 2, 3, 5, and 7 min), aeration rate (0, 0.5, 1, 1.5, and 2 L/min) and aging time (0, 0.5, 1, and >3 min). Micro- and nano-bubbles were characterized using focused beam reflection measurements (FBRM) and nanoparticle tracking analysis (NTA), respectively. The micro-flotation of quartz particles was performed using an XFG-cell in the presence and absence of BMNBs with Cetyltrimethylammonium bromide (CTAB) as a collector. The characterization of bubble sizes showed that the bulk micro-bubble (BMB) and bulk nanobubble (BNB) diameters ranged from 1–10 μm and 50–400 nm, respectively. It was found that the preparation parameters and aging time considerably affected the number of generated bubbles. When BNBs and BMBs coexisted, the recovery of fine quartz particles significantly improved (about 7%), while in the presence of only BNBs the promotion of flotation recovery was not significant (2%). This was mainly related to the aggregate via bridging, which was an advantage for quartz flotation. In comparison, no aggregates were detected when only nano-bubbles were present in the bulk solution.

The Challenges and Prospects of Recovering Fine Copper Sulfides from Tailings Using Different Flotation Techniques: A Review

Flotation is a common mineral processing method used to upgrade copper sulfide ores; in this method, copper sulfide mineral particles are concentrated in froth, and associated gangue minerals are separated as tailings. However, a significant amount of copper is lost into tailings during the processing; therefore, tailings can be considered secondary resources or future deposits of copper. Particle–bubble collision efficiency and particle–bubble aggregate stability determines the recovery of target particles; this attachment efficiency plays a vital role in the selectivity process. The presence of fine particles in the flotation circuit is because of excessive grinding, which is to achieve a higher degree of liberation. Complex sulfide ores of markedly low grade further necessitate excessive grinding to achieve the maximum degree of liberation. In the flotation process, fine particles due to their small mass and momentum are unable to collide with rising bubbles, and their rate of flotation is very slow, further lowering the recovery of target minerals. This collision efficiency mainly depends on the particle–bubble size ratio and the concentration of particles present in the pulp. To overcome this problem and to maintain a favorable particle–bubble size ratio, different techniques have been employed by researchers to enhance particle–bubble collision efficiency either by increasing particle size or by decreasing bubble size. In this article, the mechanism of tailing loss is discussed in detail. In addition, flotation methods for fine particles recovery such as microbubble flotation, column flotation, nanobubble flotation, polymer flocculation, shear flocculation, oil agglomeration, and carrier flotation are reviewed, and their applications and limitations are discussed in detail.