β-Keto-enol Tethered Pyridine and Thiophene: Synthesis, Crystal Structure Determination and Its Organic Immobilization on Silica for Efficient Solid-Liquid Extraction of Heavy Metals

Mesoporous Silica Modified with 2-Phenylimidazo[1,2-a] pyridine-3-carbaldehyde as an Effective Adsorbent for Cu(II) from Aqueous Solutions: A Combined Experimental and Theoretical Study

In this study, we will present an efficient and selective adsorbent for the removal of Cu(II) ions from aqueous solutions. The silica-based adsorbent is functionalized by 2-phenylimidazo[1,2-a] pyridine-3-carbaldehyde (SiN-imd-py) and the characterization was carried out by applying various techniques including FT-IR, SEM, TGA and elemental analysis. The SiN-imd-py adsorbent shows a good selectivity and high adsorption capacity towards Cu(II) and reached 100 mg/g at pH = 6 and T = 25 °C. This adsorption capacity is important compared to other similar adsorbents which are currently published. The adsorption mechanism, thermodynamics, reusability and the effect of different experimental conditions, such as contact time, pH and temperature, on the adsorption process, were also investigated. In addition, a theoretical study was carried out to understand the adsorption mechanism and the active sites of the adsorbent, as well as the stability of the complex formed and the nature of the bonds.

An Insight into All Tested Small Molecules against Fusarium oxysporum f. sp. Albedinis: A Comparative Review

Bayoud disease affects date palms in North Africa and the Middle East, and many researchers have used various methods to fight it. One of those methods is the chemical use of synthetic compounds, which raises questions centred around the compounds and common features used to prepare targeted molecules. In this review, 100 compounds of tested small molecules, collected from 2002 to 2022 in Web of Sciences, were divided into ten different classes against the main cause of Bayoud disease pathogen Fusarium oxysporum f. sp. albedinis (F.o.a.) with structure-activity relationship (SAR) interpretations for pharmacophore site predictions as (δ^-···δ^-), where 12 compounds are the most efficient (one compound from each group). The compounds, i.e., (Z)-1-(1.5-Dimethyl-1H-pyrazole-3-yl)-3-hydroxy but-2-en-1-one 7, (Z)-3-(phenyl)-1-(1,5-dimethyl-1H-pyrazole-3-yl)-3-hydroxyprop-2-en-1-one 23, (Z)-1-(1,5-Dimethyl-1H-pyrazole-3-yl)-3-hydroxy-3-(pyridine-2-yl)prop-2-en-1-one 29, and 2,3-bis-[(2-hydroxy-2-phenyl)ethenyl]-6-nitro-quinoxaline 61, have antifungal pharmacophore sites (δ^-···δ^-) in common in N1---O4, whereas other compounds have only one δ^- pharmacophore site pushed by the donor effect of the substituents on the phenyl rings. This specificity interferes in the biological activity against F.o.a. Further understanding of mechanistic drug-target interactions on this subject is currently underway.

Synthesis, Biochemical Characterization, and Theoretical Studies of Novel β-Keto-enol Pyridine and Furan Derivatives as Potent Antifungal Agents

In the present study, we report the design and synthesis of new derivatives of the β-keto-enol grafted on pyridine and furan moieties (L ₁ -L ₁₁ ). Structures of compounds were fully confirmed by Fourier transform infrared spectroscopy (FT-IR), ¹H NMR, ¹³C NMR, electrospray ionization/liquid chromatography-mass spectrometry (ESI/LC-MS), and elemental analysis. The compounds were screened for antifungal and antibacterial activities (Escherichia coli, Bacillus subtilis, and Micrococcus luteus). In vitro evaluation showed significant fungicidal activity for L ₁ , L ₄ , and L ₅ against fungal strains (Fusarium oxysporum f.sp albedinis) compared to the reference standard. Especially, the exceptional activity has been demonstrated for L ₁ with IC₅₀ = 12.83 μg/mL. This compound and the reference benomyl molecule also showed a correlation between experimental antifungal activity and theoretical predictions by Petra/Osiris/Molinspiration (POM) calculations and molecular coupling against the Fgb1 protein. The highest inhibition of bacterial growth for L ₁ is due to its strongest binding to the target protein. This report may stimulate the further synthesis of examples of this substance class for the development of new drugs.

New hybrid adsorbent based on porphyrin functionalized silica for heavy metals removal: Synthesis, characterization, isotherms, kinetics and thermodynamics studies

The pollution of water resources due to the disposal of toxic heavy metals has been a growing global concern for the last decades. For this purpose, the search for effective and economic material based adsorbents is required, due to the efficiency of the process. In this work, a novel inorganic-organic hybrid material based on silica chemically modified with a porphyrin (SiNTPP), with a high metal removal efficiency, was developed. The new material was characterized using a set of suitable techniques such as ¹³C NMR of the solid state, elemental analysis, FTIR, nitrogen adsorption-desorption isotherm, BET surface area, BJH pore sizes and scanning electron microscopy (SEM). The new material surface exhibits good chemical and thermal stability based on the obtained thermogravimetric curves (TGA). An adsorption study was accomplished to investigate the effect of porphyrin-silica hybrid on the removal of Pb(II), Zn(II), Cd(II) and Cu(II) from aqueous solutions using a batch method. The effect of various parameters, such as initial metal concentration, pH, temperature, as well as the kinetics and thermodynamics for sorption on SiNTPP were investigated. The studies demonstrate that adsorption is fast, as proved by the equilibrium achievement within 25min. The metals removal from aqueous solution are better adapted to the Langmuir isotherm model than to the Freundlich model. The thermodynamic parameters (ΔG°, ΔH° and ΔS°) disclose that the process was endothermic and spontaneous in nature, and the adsorption process follows a pseudo-second order kinetics. The adsorbent can be regenerated continuously without affecting its extraction percentage. Its effectiveness is highly justified compared to previous described materials.

Highly Selective Removal of Pb(II) by a Pyridylpyrazole-β-ketoenol Receptor Covalently Bonded onto the Silica Surface

Efficient materials capable of capturing toxic metals from water are widely needed. Herein, a new pyridylpyrazole-β-ketoenol receptor, X-ray diffraction analyzed, was covalently incorporated into the silica surface to produce solid and recyclable adsorbent particles. The new material, fully characterized, revealed extremely efficient removal of toxic metals from water, with a selectivity order of Pb(II) > Zn(II) > Cu(II) > Cd(II). The adsorption was exceptionally rapid at optimum pH and concentrations, showing Pb(II) removal of 93 mg g-1 within 5 min and maximum Pb(II) adsorption of 110 mg g-1 after only 20 min. Sorption isotherms agreed well with the Langmuir model suggesting a monolayer adsorption, whereas kinetics agreed with the pseudo-second-order model suggesting a chemisorption binding mechanism. Thermodynamics of adsorption were fitted with an endothermic and spontaneous process. The material, recyclable for at least five cycles, is therefore promising for the cleanup of water polluted by toxic metals, especially lead.

Removal of toxic heavy metals from river water samples using a porous silica surface modified with a new β-ketoenolic host

A new hybrid adsorbent material for the efficient removal of heavy metals from natural real water solutions (Moroccan river water samples) was prepared by the immobilization of a new conjugated β-ketoenol-pyridine-furan ligand onto a silica matrix. The thermodynamical properties including pH, adsorption isotherms, competitive adsorption, selectivity and regeneration were studied to investigate the effect of ketoenol-pyridine-furan-silica (SiNL) on the removal of Zn(II), Pb(II), Cd(II) and Cu(II) from aqueous solutions. An increase in adsorption as a function of pH and fast adsorption was reached within 25 min. The maximum sorption capacities for Zn(II), Pb(II), Cd(II) and Cu(II) were 96.17, 47.07, 48.30 and 32.15 mg·g^-1, respectively. Furthermore, the material proved to be very stable - its adsorption capacity remained greater than 98% even after five cycles of adsorption/desorption. Compared to literature results, this material can be considered a high-performing remediation adsorbent for the extraction of Zn(II) from natural real water solution.

Synthesis, crystal structure, DFT studies and biological activity of (Z)-3-(3-bromophenyl)-1-(1,5-dimethyl-1H-pyrazol-3-yl)-3-hydroxyprop-2-en-1-one

BACKGROUND

Nowadays, is emerging a new generation of highly promising inhibitors bearing the β-ketoenol functionality. The present work relates to the first synthesis, the structure determination, the DFT studies and the use of a new biomolecule designed with a β-ketoenol group bounded to a pyrazolic moiety.

RESULT

A novel β-ketoenol-pyrazole has been synthesized, well characterized and its structure was confirmed by single crystal X-ray diffraction. The electron densities and the HOMO-LUMO gap have been calculated using the DFT method with BLYP, PW91, PWC functionals and 6-31G* basis set. An evaluation of the molecule stability is provided by a NBO analysis and the calculated Fukui and Parr functions have been used to locate the reactive electrophile and nucleophile centers in the molecule. The synthesized compound, screened for its in vitro antifungal behavior against the Fusarium oxysporum f.sp. albedinis FAO fungal strains, shows a moderate activity with an inhibition percentage of 46%. The product was also tested against three bacterial strains (Escherichia coli, Bacillus subtilis and Micrococcus luteus), but no significant effect was observed against these organisms.

CONCLUSIONS

Density functional calculations are used to evaluate the HOMO-LUMO energy gap, the molecular electrostatic potential and to provide a natural bond orbital analysis. The measured antimicrobial activities encourage us to continue searching for other structures, likely to be good antifungal candidates.

Crystal structure of 4-amino-3-(thio-phen-3-ylmeth-yl)-1H-1,2,4-triazole-5(4H)-thione

In the title compound, C7H8N4S2, the thio-phene ring shows rotational disorder over two orientations in a 0.6957 (15):0.3043 (15) ratio. The plane of the 1,2,4-triazole ring makes a dihedral angle of 75.02 (17)° with the major-disorder component of the thiophene ring. In the crystal, two types of inversion dimers, described by the graph-set motifs R22(8) and R22(10), are formed by N-H⋯S inter-actions. Chains of mol-ecules running in the [101] direction are linked by weaker N-H⋯N inter-actions. The thio-phene ring is involved in π-π and C-H⋯π inter-actions.

A novel environment-friendly hybrid material based on a modified silica gel with a bispyrazole derivative for the removal of ZnII, PbII, CdIIand CuIItraces from aqueous solutions

New surface-functionalized with bispyrazole receptor was designed for efficient removal of heavy metals. The architecture of host–guest on the surface was identified.