One-Step Synthesis of N-Succinimidyl-4-[18F]Fluorobenzoate ([18F]SFB)

Simple and Efficient Synthesis of N-Succinimidyl-4-[18F]fluorobenzoate ([18F]SFB)-An Important Intermediate for the Introduction of Fluorine-18 into Complex Bioactive Compounds

Background:N-succinimidyl-[18F]fluorobenzoate ([18F]SFB) is commonly prepared through a three-step procedure starting from [18F]fluoride ion. A number of methods for the single-step radiosynthesis of [18F]SFB have been introduced recently, including the radiofluorination of diaryliodonium salts and the Cu-mediated 18F-fluorination of pinacol aryl boronates and aryl tributyl stannanes, but they still have the drawbacks of lengthy product purification procedures. In the present work, two approaches for the direct labeling of [18F]SFB from diaryliodonium (DAI) salt (4) and pinacol aryl boronate (6) are evaluated, with a major focus on developing a fast and simple SPE-based purification procedure. Methods: DAI salt precursor 6 was labeled employing the common "minimalist" approach with a two-step reaction heating sequence. The Cu-mediated radiofluorination of 4 was accomplished using Bu4NOTf as a phase transfer catalyst for the elution of [18F]fluoride, followed by radiofluorination in the same solvent. Several types of SPE cartridges were tested in the elution and SPE procedures. Results: The Cu-mediated 18F-fluorination of the pinacol aryl boronate precursor afforded a higher RCC of 56 ± 3% (n = 7), making it better suited for the one-pot synthesis of [18F]SFB. SPE-based purification was achieved using cation exchange and reverse-phase polymer resin cartridges, connected in series. In a full-batch test, [18F]SFB was obtained with an RCY of 30% (n. d. c.), RCP > 99%, Am 96-155 GBq/µmol, and a synthesis time of ≤35 min. Conclusions: Compared to other published methods, [18F]SFB production via the Cu-mediated radiofluorination of pinacol aryl boronate precursor provides significant time and cost savings, coupled with an ease of implementation.

Recent Progress in Synthetic Applications of Hypervalent Iodine(III) Reagents

Hypervalent iodine(III) compounds have found wide application in modern organic chemistry as environmentally friendly reagents and catalysts. Hypervalent iodine reagents are commonly used in synthetically important halogenations, oxidations, aminations, heterocyclizations, and various oxidative functionalizations of organic substrates. Iodonium salts are important arylating reagents, while iodonium ylides and imides are excellent carbene and nitrene precursors. Various derivatives of benziodoxoles, such as azidobenziodoxoles, trifluoromethylbenziodoxoles, alkynylbenziodoxoles, and alkenylbenziodoxoles have found wide application as group transfer reagents in the presence of transition metal catalysts, under metal-free conditions, or using photocatalysts under photoirradiation conditions. Development of hypervalent iodine catalytic systems and discovery of highly enantioselective reactions using chiral hypervalent iodine compounds represent a particularly important recent achievement in the field of hypervalent iodine chemistry. Chemical transformations promoted by hypervalent iodine in many cases are unique and cannot be performed by using any other common, non-iodine-based reagent. This review covers literature published mainly in the last 7-8 years, between 2016 and 2024.

Arginine-Selective Bioconjugation Reagent for Effective 18F-labeling of Native Proteins

Protein-based 18F-PET tracers offer new possibilities in early disease detection and personalized medicine. Their development relies heavily on the availability and effectiveness of 18F-prosthetic groups. We prepared and evaluated a novel arginine-selective prosthetic group, 4-[18F]fluorophenylglyoxal ([18F]FPG). [18F]FPG was radiosynthesized by a one-pot, two-step procedure with a non-decay-corrected (n.d.c.) isolated radiochemical yield (RCY) of 41 ± 8% (n = 10). [18F]FPG constitutes a generic tool for 18F-labeling of various proteins, including human serum albumin (HSA), ubiquitin, interleukin-2, and interleukin-4 in ∼30-60% n.d.c. isolated RCYs. [18F]FPG conjugation with arginine residues is highly selective, even in the presence of a large excess of lysine, cysteine, and histidine. [18F]FPG protein conjugates are able to preserve the binding affinity of the native proteins while also demonstrating excellent in vivo stability. The [18F]FPG-HSA conjugate has prolonged blood retention, which can be applied as a potential blood pool PET imaging agent. Thus, [18F]FPG is an arginine-selective bioconjugation reagent that can be effectively used for the development of 18F-labeled protein radiopharmaceuticals.

Spirocyclic Iodonium Ylides for Fluorine-18 Radiolabeling of Non-Activated Arenes: From Concept to Clinical Research

Positron emission tomography (PET) is a powerful imaging tool for drug discovery, clinical diagnosis, and monitoring of disease progression. Fluorine-18 is the most common radionuclide used for PET, but advances in radiotracer development have been limited by the historical lack of methodologies and precursors amenable to radiolabeling with fluorine-18. Radiolabeling of electron-rich (hetero)aromatic rings remains a long-standing challenge in the production of PET radiopharmaceuticals. In this personal account, we discuss the history of spirocyclic iodonium ylide precursors, from inception to applications in clinical research, for the incorporation of fluorine-18 into complex non-activated (hetero)aromatic rings.

Development of brain-penetrable antibody radioligands for in vivo PET imaging of amyloid-β and tau

Introduction

Alzheimer's disease (AD) is characterized by the misfolding and aggregation of two major proteins: amyloid-beta (Aβ) and tau. Antibody-based PET radioligands are desirable due to their high specificity and affinity; however, antibody uptake in the brain is limited by the blood-brain barrier (BBB). Previously, we demonstrated that antibody transport across the BBB can be facilitated through interaction with the transferrin receptor (TfR), and the bispecific antibody-based PET ligands were capable of detecting Aβ aggregates via ex vivo imaging. Since tau accumulation in the brain is more closely correlated with neuronal death and cognition, we report here our strategies to prepare four F-18-labeled specifically engineered bispecific antibody probes for the selective detection of tau and Aβ aggregates to evaluate their feasibility and specificity, particularly for in vivo PET imaging.

Methods

We first created and evaluated (via both in vitro and ex vivo studies) four specifically engineered bispecific antibodies, by fusion of single-chain variable fragments (scFv) of a TfR antibody with either a full-size IgG antibody of Aβ or tau or with their respective scFv. Using [18F]SFB as the prosthetic group, all four 18F-labeled bispecific antibody probes were then prepared by conjugation of antibody and [18F]SFB in acetonitrile/0.1 M borate buffer solution (final pH ~ 8.5) with an incubation of 20 min at room temperature, followed by purification on a PD MiniTrap G-25 size exclusion gravity column.

Results

Based on both in vitro and ex vivo evaluation, the bispecific antibodies displayed much higher brain concentrations than the unmodified antibody, supporting our subsequent F18-radiolabeling. [18F]SFB was produced in high yields in 60 min (decay-corrected radiochemical yield (RCY) 46.7 ± 5.4) with radiochemical purities of >95%, confirmed by analytical high performance liquid chromatography (HPLC) and radio-TLC. Conjugation of [18F]SFB and bispecific antibodies showed a 65%-83% conversion efficiency with radiochemical purities of 95%-99% by radio-TLC.

Conclusions

We successfully labeled four novel and specifically engineered bispecific antibodies with [18F]SFB under mild conditions with a high RCY and purities. This study provides strategies to create brain-penetrable F-18 radiolabeled antibody probes for the selective detection of tau and Aβ aggregates in the brain of transgenic AD mice via in vivo PET imaging.

Fully automated 18F-fluorination of N-succinimidyl-4-[18F]fluorobenzoate ([18F]SFB) for indirect labelling of nanobodies

N-succinimidyl-4-[¹⁸F]fluorobenzoate ([¹⁸F]SFB), a widely used labeling agent to introduce the 4-[¹⁸F]fluorobenzoyl-prosthetic group, is normally obtained in three consecutive steps from [¹⁸F]fluoride ion. Here, we describe an efficient one-step labeling procedure of [¹⁸F]SFB starting from a tin precursor. This method circumvents volatile radioactive side-products and simplifies automatization. [¹⁸F]SFB was obtained after HPLC purification in a yield of 42 + 4% and a radiochemical purity (RCP) > 99% (n = 6). In addition, we investigate the automation of the coupling of [¹⁸F]SFB to a nanobody (cAbBcII10, targeting β-lactamase enzyme) and purification by size exclusion chromatography (PD-10 desalting column) to remove unconjugated reagent. Production and use of [¹⁸F]SFB were implemented on a radiosynthesis unit (Neptis^®). The fully automated radiosynthesis process including purification and formulation required 160 min of synthesis time. [¹⁸F]SFB-labeled nanobody was obtained in a yield of 21 + 2% (activity yield 12 + 1% non-decay corrected) and a radiochemical purity (RCP) of > 95% (n = 3). This approach simplifies [¹⁸F]SFB synthesis to one-step, enhances the yield in comparison to the previous report and enables the production of radiolabeled nanobody on the same synthesis module.

211At and 125I-labeling of (hetero)aryliodonium ylides: astatine wins again

Despite the growing interest in radioiodine and 211 At-labeled radiopharmaceuticals, the search for radiolabeling reactions has been somewhat neglected, resulting in a limited number of available radiosynthetic strategies. Herein we report a comparative study of nucleophilic 125 I and 211 At-labeling of aryliodonium ylides. Whereas radioiodination efficiency was low, 211 At-labeling performed efficiently on a broad scope of precursors. The most activated aryliodonium ylides led rapidly to quantitative reactions at room temperature in acetonitrile. For deactivated precursors, heating up to 90°C in glyme and addition of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) as radical scavenger appeared essential to avoid precursor degradation and to achieve high radiochemical yields and molar activity. The approach was applied successfully to the preparation of 4-[ 211 At]astatophenylalanine (4-APA), an amino acid derivative increasingly studied as radiotherapeutic drug for cancers. This validated aryliodonium ylides as a valuable tool for nucleophilic 211 At-labeling and will complement the short but now growing list of available astatination reactions.

Solid-Phase Synthesis of Selectively Mono-Fluorobenz(o)ylated Polyamines as a Basis for the Development of 18F-Labeled Radiotracers

Polyamines are highly attractive vectors for tumor targeting, particularly with regards to the development of radiolabeled probes for imaging by positron emission (PET) and single-photon emission computed tomography (SPECT). However, the synthesis of selectively functionalized derivatives remains challenging due to the presence of multiple amino groups of similar reactivity. In this work, we established a synthetic methodology for the selective mono-fluorobenz(o)ylation of various biogenic diamines and polyamines as lead compounds for the perspective development of substrate-based radiotracers for targeting polyamine-specific membrane transporters and enzymes such as transglutaminases. For this purpose, the polyamine scaffold was constructed by solid-phase synthesis of the corresponding oxopolyamines and subsequent reduction with BH₃/THF. Primary and secondary amino groups were selectively protected using Dde and Boc as protecting groups, respectively, in orientation to previously reported procedures, which enabled the selective introduction of the reporter groups. For example, N¹-FBz-spermidine, N⁴-FBz-spermidine, N⁸-FBz-spermidine, and N¹-FBz-spermine and N⁴-FBz-spermine (FBz = 4-fluorobenzoyl) were obtained in good yields by this approach. The advantages and disadvantages of this synthetic approach are discussed in detail and its suitability for radiolabeling was demonstrated for the solid-phase synthesis of N¹-[¹⁸F]FBz-cadaverine.

Radiolabeled Peptides for SPECT and PET Imaging in the Detection of Breast Cancer: Preclinical and Clinical Perspectives

Breast cancer is the most common cancer in women worldwide. Due to the heterogeneous nature of breast cancer, the optimal treatment and expected response for each patient may not necessarily be universal. Molecular imaging techniques could play an important role in the early detection and targeted therapy evaluation of breast cancer. This review focuses on the development of peptides labeled with SPECT and PET radionuclides for breast cancer imaging. We summarized the current status of radiolabeled peptides for different receptors in breast cancer. The characteristics of radionuclides and major techniques for peptide labeling are also briefly discussed.