The Effect of Wall Material Type on the Encapsulation Efficiency and Oxidative Stability of Fish Oils

Effect of High-Pressure Homogenization and Wall Material Composition on the Encapsulation of Polyunsaturated Fatty Acids from Fish Processing

Fish oil, a rich source of omega-3 polyunsaturated fatty acids (PUFA), is a vital nutritional component, but considering its susceptibility to oxidation, it could benefit from an effective encapsulation system. This study aims to optimize high-pressure homogenization (HPH) parameters (pressure, number of passes) and wall material composition to maximize the encapsulation efficiency (EE) of fish oil, using different concentrations of maltodextrin with Arabic gum or sodium alginate. Key metrics such as emulsion droplet size, encapsulation efficiency, color, and oxidation in the final freeze-dried product were evaluated. Optimal values were achieved at 60 MPa, resulting in the lowest mean droplet diameter (369.4 ± 3.8 nm) and narrow distribution (0.197 ± 0.011) of the fish oil micelles prepared with a mixture of Tween80 and sodium caseinate as an emulsifier, without significant oxidation after four cycles of homogenization, while 80 MPa led to the highest EE (up to 95.6%), but increased oxidation. The combination of 10% w/w Arabic gum or 1% w/w sodium alginate with 20% w/w maltodextrin achieved the highest EE (79.1-82.9%) and whiteness index (82.5-83.0), indicating neutral-colored well-encapsulated fish oil without oxidation, which is desirable for product stability. Selecting optimal HPH conditions and wall material is crucial for the encapsulation efficiency and oxidation stability of omega-3 PUFA delivered in dehydrated forms.

Encapsulation of ɣ-Aminobutyric Acid Compounds Extracted from Germinated Brown Rice by Freeze-Drying Technique

Gamma-aminobutyric acid (GABA) from plants has several bioactivities, such as neurotransmission, anti-cancer cell proliferation, and blood pressure control. Its bioactivities vary when exposed to pH, heat, and ultraviolet. This study analyzed the protective effect of the GABA encapsulation technique using gum arabic (GA) and maltodextrin (MD) and the freeze-drying method. The impact of different ratios of the wall material GA and MD on morphology, GABA content, antioxidant activity, encapsulation efficiency, process yield, and physical properties were analyzed. Results showed that the structure of encapsulated GABA powder was similar to broken glass pieces of various sizes and irregular shapes. The highest GABA content and encapsulation efficiency were, respectively, 90.77 mg/g and 84.36% when using the wall material GA:MD ratio of 2:2. The encapsulated powder's antioxidant activity was 1.09-1.80 g of encapsulation powder for each formula, which showed no significant difference. GA and MD as the wall material in a 2:2 (w/w) ratio showed the lowest bulk density. The high amount of MD showed the highest Hausner ratio (HR), and Carr's index (CI) showed high encapsulation efficiency and process yield. The stability of encapsulated GABA powder can be kept in clear glass with a screw cap at 35 °C for 42 days compared to the non-encapsulated one, which can be preserved for only 18 days under the same condition. In conclusion, this study demonstrated that the freeze-drying process for GABA encapsulation preserved GABA component extracts from brown rice while increasing its potential beneficial properties. Using a wall material GA:MD ratio of 2:2 resulted in the maximum GABA content, solubility, and encapsulation efficiency while having the lowest bulk density.

Revitalizing elixir with orange peel amplification of alginate fish oil beads for enhanced anti-aging efficacy

The research introduces a novel method for creating drug-loaded hydrogel beads that target anti-aging, anti-oxidative, and anti-inflammatory effects, addressing the interconnected processes underlying various pathological conditions. The study focuses on the development of hydrogel beads containing anti-aging compounds, antioxidants, and anti-inflammatory drugs to effectively mitigate various processes. The synthesis, characterization and in vitro evaluations, and potential applications of these multifunctional hydrogel beads are discussed. A polymeric alginate-orange peel extract (1:1) hydrogel was synthesized for encapsulating fish oil. Beads prepared with variable fish oil concentrations (0.1, 0.3, and 0.5 ml) were characterized, showing no significant decrease in size i.e., 0.5 mm and a reduction in pore size from 23 to 12 µm. Encapsulation efficiency reached up to 98% within 2 min, with controlled release achieved upto 45 to 120 min with increasing oil concentration, indicating potential for sustained delivery. Fourier-transform infrared spectroscopy confirmed successful encapsulation by revealing peak shifting, interaction between constituents. In vitro degradation studies showed the hydrogel's biodegradability improved from 30 to 120 min, alongside anti-inflammatory, anti-oxidative, anti-collagenase and anti-elastase activities, cell proliferation rate enhanced after entrapping fish oil. In conclusion, the synthesized hydrogel beads are a promising drug delivery vehicle because they provide stable and effective oil encapsulation with controlled release for notable anti-aging and regenerative potential. Targeted delivery for inflammatory and oxidative stress-related illnesses is one set of potential uses. Further research may optimize this system for broader applications in drug delivery and tissue engineering.

Plant and animal protein mixed systems as wall material for microencapsulation of Mānuka essential Oil: Characterization and in vitro release kinetics

Combination of plant and animal protein diet is becoming a valuable source of nutrition in the modern diet due to the synergistic functional properties inherent in these protein complexes. Moreover, the synergy between animal and plant proteins can contribute to the high stability and improved solubility of the encapsulated bioactive ingredients (e.g., essential oils). Therefore, the study was designed to evaluate the plant (pea protein (PP) and lupine protein (LP)) and animal protein (whey protein, WP) mixed systems as a wall material for microencapsulation of mānuka essential oil, as an example of bioactive compound. Moreover, physicochemical properties and in vitro release profile of encapsulated mānuka essential oil were studied. Mānuka essential oil microcapsules exhibited low moisture content (5.3-7.1 %) and low water activity (0.33-0.37) with a solubility of 53.7-68.1 %. Change in wall material ratio significantly affected the color of microcapsules, while microcapsules prepared with 1:1 protein/oil ratio demonstrated a high encapsulation efficiency (90.4 % and 89.4 %) for protein mixed systems (PP + WP and LP + WP), respectively. Microcapsules further showed low values for lipid oxidation with a high oxidative stability and antioxidant activity (62.1-87.0 %). The zero order and Korsmeyer-Peppas models clearly explained the release mechanism of encapsulated oil, which was dependent on the type and concentration of the protein mixed used. The findings demonstrated that the protein mixed systems successfully encapsulated the mānuka essential oil with controlled release and high oxidative stability, indicating the suitability of the protein mixed systems as a carrier in encapsulation and application potential in development of encapsulated functional foods.

The effect of octenyl succinic anhydride-modified chitosan coating on DHA-loaded nanoemulsions: Physichemical stability and in vitro digestibility

Octenyl succinic anhydride-modified chitosan (OSA-CS) was synthesized and applied as a coating material to enhance the stability of docosahexaenoic acid (DHA)-loaded nanoemulsion. Due to the presence of the positively charged OSA-CS coating, the nanoemulsion exhibited a high positive zeta potential and two different layers. Compared with natural CS-coated nanoemulsion, OSA-CS-coated nanoemulsion showed improved storage stability (physical and chemical stability) and stability against environmental stresses (ionic strengths, temperatures and pH). Besides, OSA-CS-coated nanoemulsion protected encapsulated DHA from simulated gastric fluid damage better than that of natural CS-coated nanoemulsion, suggesting that OSA-CS-coated nanoemulsion had the potential to deliver more DHA into the small intestine. In conclusion, based on the comparison of two coating materials, natural chitosan and OSA-CS, it was found that the encapsulated nutrient was better protected by the OSA-CS coating. Such a finding will provide insights to broaden the application of modified chitosan in food delivery systems.

Optimization of Hypericum Perforatum Microencapsulation Process by Spray Drying Method

Hypericum perforatum (HP) contains valuable and beneficial bioactive compounds that have been used to treat or prevent several illnesses. Encapsulation technology offers protection of the active compounds and facilitates to expose of the biologically active compounds in a controlled mechanism. Microcapsulation of the hydroalcoholic gum arabic and maltodextrin have hot been used as wall materials in the encapsulation of HP extract. Therefore, the optimum microencapsulation parameters of Hypericum perforatum (HP) hydroalcoholic extract were determined using response surface methodology (RSM) for the evaluation of HP extract. Three levels of three independent variables were screened using the one-way ANOVA. Five responses were monitored, including total phenolic content (TPC), 2,2-Diphenyl-1-picrylhydrazyl (DPPH), carr index (CI), hausner ratio (HR), and solubility. Optimum drying conditions for Hypericum perforatum microcapsules (HPMs) were determined: 180 °C for inlet air temperature, 1.04/1 for ratio of maltodextrin to gum arabic (w/w), and 1.98/1 for coating to core material ratio (w/w). TPC, antioxidant activity, CI, HR, and solubility values were specified as 316.531 (mg/g GAE), 81.912%, 6.074, 1.066, and 35.017%, respectively, under the optimized conditions. The major compounds of Hypericum perforatum (hypericin and pseudohypericin) extract were determined as 4.19 μg/g microcapsule and 15.09 μg/g microcapsule, respectively. Scanning electron microscope (SEM) analysis revealed that the mean particle diameter of the HPMs was 20.36 µm. Based on these results, microencapsulation of HPMs by spray drying is a viable technique which protects the bioactive compounds of HP leaves, facilitating its application in the pharmaceutical, cosmetic, and food industries.

Co-encapsulation of fish oil with essential oils and lutein/curcumin to increase the oxidative stability of fish oil powder

The oxidation-resistant and multi-functional fish oil powders were produced by co-encapsulating fish oil with essential oils, lutein, and curcumin. The ovalbumin/alginate complex was used as the wall, and the wall-to-oil ratio was fixed at 1:1 based on yield, oil recovery, and internalization efficiency (IE). Surface oil was removed to better understand the characteristics of the fish oil powders. Scanning electron microscopy (SEM) results indicated that the freeze-dried fish oil powders had irregular shapes with visible pores on the surface. Covalent bonds and electrostatic interactions within the ovalbumin/alginate complex were detected through FTIR. The garlic essential oil-added sample showed the strongest oxidative stability throughout the storage period (30 days). This work showed that fish oil had been encapsulated successfully and multi-functional fish oil powders could be produced by dissolving lipophilic bioactive compounds in fish oil before encapsulation.

Preparation of Colorimetric Sensor Array System to Evaluate the Effects of Alginate Edible Coating on Boiled-Dried Anchovy

The colorimetric sensor array (CSA) is a simple, rapid, and cost-effective system widely used in food science to assess food quality by identifying undesirable volatile organic compounds. As a prospective alternative to conventional techniques such as total volatile basic nitrogen, peroxide value, and thiobarbituric acid reactive substance analysis, the CSA system has garnered significant attention. This study evaluated the quality of edible-coated food products using both conventional and CSA methods in order to demonstrate that the CSA approach is a feasible alternative to conventional methods. Boiled-dried anchovies (BDA) were selected as the model food product, and the sample's quality was assessed as a function of storage temperature and incubation period using conventional techniques and the CSA system. The surface of BDA was coated with an edible alginate film to form the surface-modified food product. The conventional methods revealed that an increase in storage temperature and incubation time accelerated the lipid oxidation process, with the uncoated BDA undergoing lipid oxidation at a faster rate than the coated BDA. Utilizing multivariate statistical analysis, the CSA approach essentially yielded the same results. In addition, the partial least square regression technique revealed a strong correlation between the CSA system and conventional methods, indicating that the CSA system may be a feasible alternative to existing methods for evaluating the quality of food products with surface modifications.

Oxidative stability and sensory evaluation of sodium caseinate-based yak butter powder

Yak butter's high unsaturated fatty acid level predisposes it to oxidation, hence must be converted into more stable forms like powder. This study aimed to spray dry yak butter using 10% yak butter and four sodium caseinate (NaCas) formulations: sample A: 100% NaCas; sample B: 50% NaCas, 50% lactose; sample C: 75% NaCas, 25% lactose; and sample D: 25% NaCas, 75% maltodextrin. The powders were vacuum and hermetically sealed, and evaluated for oxidative stability, physical and sensory properties during storage at 65 ℃ for 30 days. The results showed that samples B and D had similar and most favorable physical properties (such as, moisture, water activity, particle size, bulk density re-dispersion time, and encapsulation efficiency); though sample B, together with sample C, browned the most during storage. The majority of the sensory panelists preferred samples B and D; observed high caking in samples C and B; and the least whiteness loss and caking in samples D and A but high off-flavors in samples A and C. After storage, peroxide and thiobarbituric acid values of powder samples ranged from 34.98 to 69.54 meqO2/kg and 1.85-9.43 mg MD/kg, respectively, in the decreasing order of A, C, B, and D. Sample D, followed by B, showed the highest radical scavenging activity. Therefore, for optimum yak butter powder physical properties and oxidative stability, 50%:50%, NaCas: lactose, and 25%:75%, NaCas: maltodextrin formulations should be used. This study provides essential knowledge for butter powder processors.

Microencapsulation of Citrus aurantifolia essential oil with the optimized CaCl2 crosslinker and its antibacterial study for cosmetic textiles

A functional fabric immobilized by the microcapsules of C. aurantifolia lime essential oil (LO) was prepared and characterized. A varied amount of CaCl2 crosslinker was optimized to coacervate LO using alginate-gelatin biopolymers and Tween 80 emulsifier. A further evaluation of the immobilized LO microcapsules for the antibacterial effect against both Gram-positive and Gram-negative bacteria was conducted. The optimized alginate/gelatin-based microcapsules were effectively crosslinked by 15% CaCl2 with an yield, oil content (OC), and encapsulation efficiency (EE) of 39.91 ± 3.10%, 78.33 ± 7.53%, and 90.27 ± 5.84%, respectively. A spherical shape of LO microcapsules was homogeneously found with an average particle size of 1.394 μm. A first-order kinetics mechanism for the release of LO out of the microcapsules was modeled by Avrami's kinetic equation (k = 1.60 ± 3.68 × 10-5 s-1). The LO microcapsules demonstrated good thermal stability up to 100 °C and maintained 51.07% OC and 43.56% EE at ambient temperature for three weeks. Using a pad dry method and citric acid binder, LO microcapsules were successfully immobilized on a cloth with a % add on 30.60 ± 1.80%. The LO microcapsules and the immobilized one exhibited a moderate ZoI of bacterial growth for Gram-positive S. aureus and S. epidermidis as well as Gram-negative E. coli and K. pneumonia. Further washing test toward the functional fabric showed that the LO microcapsules incorporated into the fabric were resistant to five cycles of normal washing with a mass reduction of 22.01 ± 1.69%.