Mo-Doped Cu2S Multilayer Nanosheets Grown In Situ on Copper Foam for Efficient Hydrogen Evolution Reaction

Ag/Cu2O nanoarray sensors for rapid detection of Bio-H2S in human blood

The concentration of hydrogen sulfide (H2S) in human blood is closely associated with various chronic diseases. Therefore, it is imperative to design a sensor that can conveniently, rapidly, and accurately detect H2S in human blood at room temperature. In this work, we developed an Ag/Cu2O-based sensor using a two-dimensional electrodeposition in situ assembly method for detecting biological hydrogen sulfide (bio-H2S). The morphological and structural properties indicate that a distinct contact interface has been established between Ag and Cu2O. The sensor exhibits high selectivity, good stability, and a strong linear response within the range of 50-250 μM (R2 = 0.999 58). At room temperature, the sensor displayed a remarkable response of up to 12 704.35% when exposed to 250 μM bio-H2S in blood, with a response time of just 40 s. The great sensing ability of Ag/Cu2O nanoarray for bio-H2S detection is mainly attributed to Schottky barrier modulation of Ag/Cu2O, catalytic sensitization of Ag nanowires, and vulcanization reaction of Cu2O. These results provide significant perspectives for the early diagnosis of chronic diseases and the real-time monitoring of blood-related diseases.

Enhanced Catalytic Activity of CuO@CuS Core-Shell Structure for Highly Efficient HER Application

Using electrocatalytic water reduction to produce hydrogen fuel offers significant potential for clean energy, yet its large-scale adoption depends on developing cost-effective, non-precious, and efficient catalysts to replace expensive Pt-based state-of-the-art HER catalysts. The catalytic HER performance of an active catalyst largely depends on the available catalytic active sites, conductivity, and intrinsic electrochemical kinetics, all of which can be altered by incorporating a heteroatom into the active catalyst structure. Herein, we synthesized a unique nitrogen-doped CuO@CuS (NCOS) core-shell-structured catalyst through a facile hydrothermal process followed by an efficacious nitrogenation process, and its electrochemical performance for the HER was systematically analyzed. The NCOS core-shell-structured catalyst exhibits a reduced overpotential (55 mV) and Tafel slope (107 mV dec-1) compared to the pure CuS (CS; 179 mV and 201 mV dec-1) catalyst at a current density of 10 mA cm-2. Moreover, the NCOS core-shell-structured catalyst demonstrates excellent endurance for up to 50 h of chronopotentiometric testing at a driving current density rate of 10 and 100 mA cm-2. This excellent catalytic HER activity is a result of an increased electron transfer rate and a greater number of accessible active sites, attributed to a change in structural properties and the high electronic conductivity aroused from nitrogen incorporation, as evidenced from the TOF and EIS curve analyses.

Self-Supported Mn-Ni3Se2 Electrocatalysts for Water and Urea Electrolysis for Energy-Saving Hydrogen Production

Recently, there has been a huge research interest in developing robust, efficient, low-cost, and earth-abundant materials for water and urea electrolysis for hydrogen (H2) generation. Herein, we demonstrate the facile hydrothermal synthesis of self-supported Mn-Ni3Se2 on Ni foam for overall water splitting under wide pH conditions. With the optimized concentration of Mn in Ni3Se2, the overpotential for hydrogen evolution, oxygen evolution, and urea oxidation is significantly reduced by an enhanced electrochemical active surface area. Different electronic states of metal elements also produce a synergistic effect, which accelerates the rate of electrochemical reaction for water and urea electrolysis. Owing to the chemical robustness, Mn-doped Ni3Se2 shows excellent stability for long time duration, which is important for its practical applications. A two-electrode electrolyzer exhibits low cell voltages of 2.02 and 1.77 V for water and urea electrolysis, respectively, to generate a current density of 100 mA/cm2. Finally, the prepared nanostructured Mn-Ni3Se2@NF acts as an electrocatalyst for overall water splitting under wide pH conditions and urea electrolysis for energy-saving hydrogen production and wastewater treatment.

Transition Metals-Based Water Splitting Electrocatalysts on Copper-Based Substrates: The Integral Role of Morphological Properties

Electrocatalytic water splitting is a promising alternative to produce high purity hydrogen gas as the green substitute for renewable energy. Thus, development of electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are vital to improve the efficiency of the water splitting process particularly based on transition metals which has been explored extensively to replace the highly active electrocatalytic activity of the iridium and ruthenium metals-based electrocatalysts. In situ growth of the material on a conductive substrate has also been proven to have the capability to lower down the overpotential value significantly. On top of that, the presence of substrate has given a massive impact on the morphology of the electrocatalyst. Among the conductive substrates that have been widely explored in the field of electrochemistry are the copper based substrates mainly copper foam, copper foil and copper mesh. Copper-based substrates possess unique properties such as low in cost, high tensile strength, excellent conductor of heat and electricity, ultraporous with well-integrated hierarchical structure and non-corrosive in nature. In this review, the recent advancements of HER and OER electrocatalysts grown on copper-based substrates has been critically discussed, focusing on their morphology, design, and preparation methods of the nanoarrays.

Highly Durable Nanoporous Cu2-xS Films for Efficient Hydrogen Evolution Electrocatalysis under Mild pH Conditions

Copper-based hydrogen evolution electrocatalysts are promising materials to scale-up hydrogen production due to their reported high current densities; however, electrode durability remains a challenge. Here, we report a facile, cost-effective, and scalable synthetic route to produce Cu2-xS electrocatalysts, exhibiting hydrogen evolution rates that increase for ∼1 month of operation. Our Cu2-xS electrodes reach a state-of-the-art performance of ∼400 mA cm-2 at -1 V vs RHE under mild conditions (pH 8.6), with almost 100% Faradaic efficiency for hydrogen evolution. The rise in current density was found to scale with the electrode electrochemically active surface area. The increased performance of our Cu2-xS electrodes correlates with a decrease in the Tafel slope, while analyses by X-ray photoemission spectroscopy, operando X-ray diffraction, and in situ spectroelectrochemistry cooperatively revealed the Cu-centered nature of the catalytically active species. These results allowed us to increase fundamental understanding of heterogeneous electrocatalyst transformation and consequent structure-activity relationship. This facile synthesis of highly durable and efficient Cu2-xS electrocatalysts enables the development of competitive electrodes for hydrogen evolution under mild pH conditions.

Recent advances in understanding and design of efficient hydrogen evolution electrocatalysts for water splitting: A comprehensive review

An unsustainable reliance on fossil fuels is the primary cause of the vast majority of greenhouse gas emissions, which in turn lead to climate change. Green hydrogen (H₂), which may be generated by electrolyzing water with renewable power sources, is a possible substitute for fossil fuels. On the other hand, the increasing intricacy of hydrogen evolution electrocatalysts that are presently being explored makes it more challenging to integrate catalytic theories, catalytic fabrication procedures, and characterization techniques. This review will initially present the thermodynamics, kinetics, and associated electrical and structural characteristics for HER electrocatalysts before highlighting design approaches for the electrocatalysts. Secondly, an in-depth discussion regarding the rational design, synthesis, mechanistic insight, and performance improvement of electrocatalysts is centered on both the intrinsic and extrinsic influences. Thirdly, the most recent technological advances in electrocatalytic water-splitting approaches are described. Finally, the difficulties and possibilities associated with generating extremely effective HER electrocatalysts for water-splitting applications are discussed.