A Perfect Absorber Based on Similar Fabry-Perot Four-Band in the Visible Range

A high-performance ultra-compact plasmonic metamaterial structure for optical THz absorption

This study presents the design and analysis of a high-performance metamaterial absorber for the optical terahertz (THz) regime. The proposed absorber utilizes a unique nested flower-shaped structure composed of nickel (Ni) and silicon dioxide (SiO2), achieving an average absorption exceeding 97.91% with a broad bandwidth of 1320 THz (180 THz - 1500 THz). A unit cell size of 66 nm × 66 nm × 24 nm makes this design highly attractive for miniaturized devices. Strong absorption originates from localized surface plasmon resonance (LSPR), where light interacts with the electrons on the Ni surface. Notably, the design maintains excellent absorption performance even at oblique incident angles up to 60° with polarization insensitivity. These results highlight the Ultra-Compact Plasmonic Metamaterial (UCPM) absorber's potential for diverse applications due to its broad spectral response, high absorption efficiency, and minimal footprint, making it valuable for energy harvesting, infrared imaging, and electromagnetic stealth technologies.

Structures, principles, and properties of metamaterial perfect absorbers

Metamaterials are a kind of artificial material with special properties, showing huge potential for applications in fields such as infrared measurement, solar cells, optical sensors, and optical stealth. A metamaterial perfect absorber (MPA) is designed based on a metamaterial, featuring strong absorption, small volume, light weight, ultra-bandwidth, tunability and other characteristics. This paper introduces the absorption mechanism of MPAs from microwave to optical wave band, and four directions of absorber design are elaborated. Equivalent impedance matching, plasma resonance and interference effect are the main absorption mechanisms of MPA. Multiband perfect absorption, ultra-wideband and ultra-narrowband perfect absorption, polarization and angle insensitive absorption, and dynamically controllable tunable absorption are the main design aspects. Among them, the proposal of a dynamically tunable absorber realizes the dynamic absorption. Finally, the problems and challenges of metamaterial perfect absorber design are discussed.

Thin-Film Solar Energy Absorber Structure for Window Coatings for Self-Sufficient Futuristic Buildings

Energy-efficient buildings are a new demand in the current era. In this paper, we present a novel metamaterial design aimed at achieving efficient solar energy absorption through a periodic MMA structure composed of a W-GaAs-W. The proposed structure can be implemented as the window coating and in turn it can absorb the incident solar energy and, then, this energy can be used to fulfill the energy demand of the building. Our results reveal significant improvements, achieving an average absorptance of 96.94% in the spectral range. Furthermore, we explore the influence of the angle of incidence on the absorber's response, demonstrating its angle-insensitive behavior with high absorption levels (above 90%) for incidence angles up to 60° for TE polarization and 40° for TM polarization. The proposed structure presents a significant advancement in metamaterial-based solar energy absorption. By exploring the effects of structural parameters and incident angles, we have demonstrated the optimized version of our proposed absorber. The potential applications of this metamaterial absorber in self-sufficient futuristic building technologies and self-sustaining systems offer new opportunities for harnessing solar energy and are a valuable contribution to future developments in the fields of metamaterials and renewable energy.

An Innovative Polarisation-Insensitive Perfect Metamaterial Absorber with an Octagonal-Shaped Resonator for Energy Harvesting at Visible Spectra

Perfect metamaterial absorber (PMA) is an attractive optical wavelength absorber with potential solar energy and photovoltaic applications. Perfect metamaterials used as solar cells can improve efficiency by amplifying incident solar waves on the PMA. This study aims to assess a wide-band octagonal PMA for a visible wavelength spectrum. The proposed PMA consists of three layers: nickel, silicon dioxide, and nickel. Based on the simulations, polarisation-insensitive absorption transverse electric (TE) and transverse magnetic (TM) modes were achieved due to symmetry. The proposed PMA structure was subjected to computational simulation using a FIT-based CST simulator. The design structure was again confirmed using FEM-based HFSS to maintain pattern integrity and absorption analysis. The absorption rates of the absorber were estimated at 99.987% and 99.997% for 549.20 THz and 653.2 THz, respectively. The results indicated that the PMA could achieve high absorption peaks in TE and TM modes despite being insensitive to polarisation and the incident angle. Electric field and magnetic field analyses were performed to understand the absorption of the PMA for solar energy harvesting. In conclusion, the PMA possesses outstanding visible frequency absorption, making it a promising option.

Near-perfect wide-band absorbers based on one-dimensional photonic crystal structures in 1-20 THz frequencies

This paper investigates the absorption behavior of one-dimensional (1D) photonic crystal (PhC) structures in the 1-20 THz region. The structures are analyzed by the transfer matrix method to achieve accurate results quickly with ordinary simulation facilities. The simulation results indicate a strong dependence of the absorber performance on the thickness and material of the PhC layers, as well as the frequency and angle of incident light. The combination of silica and titanium (Ti) materials as dielectric and metal layers presents a great choice for broadband high-absorption applications so that this structure can absorb, on average, more than 80% of the normal incident radiation in the studied frequency range. Additionally, this absorber has the lowest dependence on incident light with the angle varying from 0° to 80° compared to identical absorbers with silver, aluminum, gold, chromium, nickel, and tungsten metals. The excellent absorption feature of the Ti-based absorber compared to the other absorbers is attributed to the lower permittivity of Ti (in both real and imaginary parts) in comparison with the other metals. In addition to owning simple and fabrication-friendly structures, 1D PhCs can pave the way to achieve various absorption spectra proportional to the needs of photonics, communications, and aerospace applications.

Silicon-based asymmetric dimer-resonator grating for narrowband perfect absorption and sensing

In this work, a method for designing an ultra-narrowband absorber platform is presented with asymmetric silicon-based dimer-resonators grating. Within the infrared range of 3000 ∼ 4000 nm, two narrowband absorption peaks with absorptivity greater than 99% are produced by the absorber. Moreover, during the optical sensing, such an absorber platform shows high-performance sensitivity factors for the absorption wavelengths at λ₁ = 3468 nm (S = 3193 nm/RIU, FOM = 532) and at λ₂= 3562 nm (S = 3120 nm/RIU, FOM = 390). Strong scattering coupling and the magnetic resonances supported in this silicon based grating produce the high absorption. Otherwise, additional methods such as the polarization and incident angles are used to further tune the absorption responses in the intensity and wavelengths, indicating the feasibility for artificial manipulations. The achieved ultra-sharp perfect absorption and the related sensitive response hold the silicon based resonant scheme with wide applications in bio-sensing, spectral filtering and other fields.

Polarization-dependent wideband metamaterial absorber for ultraviolet to near-infrared spectral range applications

The need for wideband metamaterial absorbers (WBMA) for applications other than sensing and filtering has demanded modifications to the conventional three-layer metal-insulator-metal (MIM) absorber configuration. This modification often results in complex geometries and an increased number of layers requiring complex lithographic processes for fabrication. Here, we show that a metamaterial absorber with rectangular geometry in the simple MIM configuration can provide wideband absorption covering the ultraviolet and near-infrared spectral range. Due to its asymmetric nature, the WBMA is sensitive to the polarization of the incident light and independent of the angle of incidence up to about 45° depending on the polarization of the incident light. The characteristics of the WBMA presented here may be useful for applications such as detectors for wide spectral band applications.

Breaking the Symmetry of a Metal-Insulator-Metal-Based Resonator for Sensing Applications

This article designed a novel multi-mode plasmonic sensor based on a metal-insulator-metal waveguide side-coupled to a circular-shaped resonator containing an air path in the resonator. The electromagnet field distributions and transmittance spectra are investigated using finite element method-based simulations. Simulation results show that an air path in the resonator's core would impact the transmittance spectrum of SPPs. Besides, the air path is crucial in offering efficient coupling and generating multiple plasmon modes in the sensor system. The proposed structure has the advantage of multi-channel, and its sensitivity, figure of merit, and dipping strength can reach 2800 nm/RIU, 333.3 1/RIU, and 86.97%, respectively. The achieved plasmonic sensor can also apply for lab-on-chip in biochemical analysis for detecting the existence or nonappearance of diabetes through the human glucose concentration in urine.

A multichannel color filter with the functions of optical sensor and switch

This paper reports a multichannel color filter with the functions of optical sensor and switch. The proposed structure comprises a metal-insulator-metal (MIM) bus waveguide side-couples to six circular cavities with different sizes for filtering ultra-violet and visible lights into individual colors in the wavelength range of 350-700 nm. We used the finite element method to analyze the electromagnetic field distributions and transmittance properties by varying the structural parameters in detail. The designed plasmonic filter takes advantage of filtering out different colors since the light-matter resonance and interference between the surface plasmon polaritons (SPPs) modes within the six cavities. Results show that the designed structure can preferentially select the desired colors and confine the SPPS modes in one of the cavities. This designed structure can filter eleven color channels with a small full width at half maximum (FWHM) ~ 2 nm. Furthermore, the maximum values of sensitivity, figure of merit, quality factor, dipping strength, and extinction ratio can achieve of 700 nm/RIU, 350 1/RIU, 349.0, 65.04%, and 174.50 dB, respectively, revealing the excellent functions of sensor performance and optical switch, and offering a chance for designing a beneficial nanophotonic device.

Terahertz Broadband Absorber Based on a Combined Circular Disc Structure

To solve the problem of complex structure and narrow absorption band of most of today's terahertz absorbers, this paper proposes and utilizes the finite element (COMSOL) method to numerically simulate a broadband absorber based on a straightforward periodic structure consisting of a disk and concentric ring. The final results show that our designed absorber has an absorption rate of over 99% in the broadband range of 9.06 THz to 9.8 THz and an average of over 97.7% in the ultra-broadband range of 8.62 THz to 10 THz. The reason for the high absorption is explained by the depiction of the electric field on the absorber surface at different frequencies. In addition, the materials for the top pattern of the absorber are replaced by Cu, Ag, or Al, and the absorber still achieves perfect absorption with different metal materials. Due to the perfect symmetry of the absorber structure, the absorber is very polarization-insensitive. The overall design is simple, easy to process and production. Therefore, our research will offer great potential for applications in areas such as terahertz electromagnetic stealth, sensing, and thermal imaging.

Preparation of ZnO/Bi2O3 Composites as Heterogeneous Thin Film Materials with High Photoelectric Performance on FTO Base

In recent years, ZnO nanomaterials have achieved great performance in solar energy applications. How to synthesize a ZnO nanocomposite structure with high photoelectric conversion efficiency has become an urgent problem to solved. In this paper, a narrow band gap bismuth trioxide (Bi2O3) coated on a ZnO nanoarray by magnetron sputtering was used to prepare a composite heterojunction ZnO/Bi2O3. Studies have found that ZnO/Bi2O3 exhibits excellent photoelectric conversion performance. By preparing a composite heterostructure of ZnO/Bi2O3, it can effectively compensate for the insufficient absorption of ZnO in the visible light range and inhibit the recombination of carriers within the material. The influence of Bi2O3 thickness on the microstructure and electronic structure of the ZnO/Bi2O3 composite structure was explored and analyzed. The energy gap width of the composite heterostructure decreases with the increase in the Bi2O3 thickness on the surface of the ZnO nanorod array. At the same time, the conductive glass composite film structure is simple to prepare and is very environmentally friendly. The ZnO/Bi2O3 composite heterogeneous material prepared this time is suitable for solar cells, photodetectors, photocatalysis and other fields.

Significantly enhanced coupling effect and gap plasmon resonance in a MIM-cavity based sensing structure

Herein, we design a high sensitivity with a multi-mode plasmonic sensor based on the square ring-shaped resonators containing silver nanorods together with a metal–insulator-metal bus waveguide. The finite element method can analyze the structure's transmittance properties and electromagnetic field distributions in detail. Results show that the coupling effect between the bus waveguide and the side-coupled resonator can enhance by generating gap plasmon resonance among the silver nanorods, increasing the cavity plasmon mode in the resonator. The suggested structure obtained a relatively high sensitivity and acceptable figure of merit and quality factor of about 2473 nm/RIU (refractive index unit), 34.18 1/RIU, and 56.35, respectively. Thus, the plasmonic sensor is ideal for lab-on-chip in gas and biochemical analysis and can significantly enhance the sensitivity by 177% compared to the regular one. Furthermore, the designed structure can apply in nanophotonic devices, and the range of the detected refractive index is suitable for gases and fluids (e.g., gas, isopropanol, optical oil, and glucose solution).

Ultra-Wideband and Wide-Angle Perfect Solar Energy Absorber Based on Titanium and Silicon Dioxide Colloidal Nanoarray Structure

In this paper, we designed an ultra-wideband solar energy absorber and approved it numerically by the finite-difference time-domain simulation. The designed solar energy absorber can achieve a high absorption of more than 90% of light in a continuous 3.506 μm (0.596 μm-4.102 μm) wavelength range. The basic structure of the absorber is based on silicon dioxide colloidal crystal and Ti. Since the materials have a high melting point, the designed solar energy absorber can work normally under high temperature, and the structure of this solar energy absorber is simpler than most solar energy absorbers fabricated with traditional metal. In the entire wavelength band researched, the average absorption of the colloidal crystal-based solar energy absorber is as high as 94.3%, demonstrating an excellent performance under the incidence light of AM 1.5 solar spectrum. In the meantime, the absorption spectrum of the solar energy absorber is insensitive to the polarization of light. In comparison to other similar structures, our designed solar energy absorber has various advantages, such as its high absorption in a wide spectrum range and that it is low cost and easy to make.

Broadband Solar Absorber Based on Square Ring cross Arrays of ZnS

Solar energy is an inexhaustible clean energy. However, how to improve the absorption efficiency in the visible band is a long-term problem for researchers. Therefore, an electromagnetic wave absorber with an ultra-long absorption spectrum has been widely considered by researchers of optoelectronic materials. A kind of absorbing material based on ZnS material is presented in this paper. Our purpose is for the absorber to achieve a good and wide spectrum of visible light absorption performance. In the wide spectrum band (553.0 THz-793.0 THz) of the absorption spectrum, the average absorption rate of the absorber is above 94%. Using surface plasmon resonance (SPR) and gap surface plasmon mode, the metamaterial absorber was studied in visible light. In particular, the absorber is insensitive to both electric and magnetic absorption. The absorber can operate in complex electromagnetic environments and at high temperatures. This is because the absorber is made of refractory metals. Finally, we discuss and analyze the influence of the parameters regulating the absorber on the absorber absorption efficiency. We have tried to explain why the absorber can produce wideband absorption.

Design of Narrow-Band Absorber Based on Symmetric Silicon Grating and Research on Its Sensing Performance

In this paper, using the surface plasmon and Fabry–Pérot (FP) cavity, the design of a symmetric silicon grating absorber is proposed. The time-domain finite difference method is used for simulation calculations. The basic unit structure is a dielectric grating composed of silicon dioxide, metal and silicon. Through the adjustment of geometric parameters, we have achieved the best of the symmetric silicon grating absorber. A narrowband absorption peak with an absorption rate greater than 99% is generated in the 3000–5000 nm optical band, and the wavelength of the absorption peak is λ = 3750 nm. The physical absorption mechanism is that silicon light generates surface plasmon waves under the interaction with incident light, and the electromagnetic field coupling of surface plasmon waves and light causes surface plasmon resonance, thereby exciting strong light response modulation. We also explore the influence of geometric parameters and polarization angle on the performance of silicon grating absorbers. Finally, we systematically study the refractive index sensitivity of these structures. These structures can be widely used in optical filtering, spectral sensing, gas detection and other fields.

All-Optical Planar Polymer Waveguide-Based Biosensor Chip Designed for Smartphone-Assisted Detection of Vitamin D

An all-optical plasmonic sensor platform designed for smartphones based on planar-optical waveguide structures integrated in a polymer chip is reported for the first time. To demonstrate the applicability of the sensor system for biosensing purposes, the detection of 25-hydroxyvitamin D (25OHD) in human serum samples using an AuNP-enhanced aptamer-based assay was demonstrated. With the aid of the developed assay sensitivity of 0.752 pixel/nM was achieved for 25OHD concentrations ranging from 0–100 nM. The waveguide structure of the sensor enables miniaturisation and parallelisation, thus, demonstrates the potential for simultaneous detection of various analytes including biomarkers. The entire optical arrangement can be integrated into a single polymer chip which allows for large scale and cost-efficient sensor fabrication. The broad utilization and access of smartphone electronics make the proposed design most attractive for its wider use in lab-on-chip applications.

Dansyl-Labelled Ag@SiO2 Core-Shell Nanostructures-Synthesis, Characterization, and Metal-Enhanced Fluorescence

The present work describes synthesis, characterization, and use of a new dansyl-labelled Ag@SiO2 nanocomposite as an element of a new plasmonic platform to enhance the fluorescence intensity. Keeping in mind that typical surface plasmon resonance (SPR) characteristics of silver nanoparticles coincide well enough with the absorption of dansyl molecules, we used them to build the core of the nanocomposite. Moreover, we utilized 10 nm amino-functionalized silica shell as a separator between silver nanoparticles and the dansyl dye to prevent the dye-to-metal energy transfer. The dansyl group was incorporated into Ag@SiO2 core-shell nanostructures by the reaction of aminopropyltrimethoxysilane with dansyl chloride and we characterized the new dansyl-labelled Ag@SiO2 nanocomposite using transmission electron microscopy (TEM) and Fourier-transform infrared spectroscopy (FTIR). Additionally, water wettability measurements (WWM) were carried out to assess the hydrophobicity and hydrophilicity of the studied surface. We found that the nanocomposite deposited on a semitransparent silver mirror strongly increased the fluorescence intensity of dansyl dye (about 87-fold) compared with the control sample on the glass, proving that the system is a perfect candidate for a sensitive plasmonic platform.

Ultra-Broadband High-Efficiency Solar Absorber Based on Double-Size Cross-Shaped Refractory Metals

In this paper, a theoretical simulation based on a finite-difference time-domain method (FDTD) shows that the solar absorber can reach ultra-broadband and high-efficiency by refractory metals titanium (Ti) and titanium nitride (TiN). In the absorption spectrum of double-size cross-shaped absorber, the absorption bandwidth of more than 90% is 1182 nm (415.648–1597.39 nm). Through the analysis of the field distribution, we know the physical mechanism is the combined action of propagating plasmon resonance and local surface plasmon resonance. After that, the paper has a discussion about the influence of different structure parameters, polarization angle and angle of incident light on the absorptivity of the absorber. At last, the absorption spectrum of the absorber under the standard spectrum of solar radiance Air Mass 1.5 (AM1.5) is studied. The absorber we proposed can be used in solar energy absorber, thermal photovoltaics, hot-electron devices and so on.

Fabrication of ZnO@Ag@Ag3PO4 Ternary Heterojunction: Superhydrophilic Properties, Antireflection and Photocatalytic Properties

A ZnO seed layer was formed on the fluorine-doped tin oxide substrate by magnetron sputtering, and then a ZnO nanorod was grown on the ZnO seed layer by a hydrothermal method. Next, we prepared a single-crystal Ag seed layer by magnetron sputtering to form a ZnO@Ag composite heterostructure. Finally, Ag₃PO₄ crystals were grown on the Ag seed layer by a stepwise deposition method to obtain a ZnO@Ag@Ag₃PO₄ ternary heterojunction. The composite heterostructure of the material has super strong hydrophilicity and can be combined with water-soluble pollutants very well. Besides, it has excellent anti-reflection performance, which can absorb light from all angles. When Ag exists in the heterojunction, it can effectively improve the separation of photo-generated electrons and holes, and improve the photoelectric conversion performance. Based on the above characteristics, this nano-heterostructure can be used in the fields of solar cells, sensors, light-emitting devices, and photocatalysis.