3D Hollow rGO Microsphere Decorated with ZnO Nanoparticles as Efficient Sulfur Host for High-Performance Li-S Battery

Manufacturing Shape-Controllable Flexible PEDOT/rGO Composite Electrodes for Planar Micro-Supercapacitors

Flexible electronic products, with their characteristics of flexibility and wearability, have attracted significant attention and have become an important direction in the research and development of the electronics industry. Planar micro-supercapacitors (MSCs) with flexible composite electrodes can provide reliable energy support for these products, propelling their further development. The research employed a quick, effective, and environmentally friendly method of laser scribing to create shape-controllable flexible composite electrodes on composite films of Poly(3,4-ethylenedioxythiophene) and graphene oxide (PEDOT/GO), which were subsequently assembled into MSCs. An analysis of the composite electrode morphology, structure, and elemental distribution was conducted through the utilization of SEM, TEM, and XPS techniques. Following this, a comprehensive evaluation of the electrochemical performance of the flexible MSCs was carried out, which included cyclic voltammetry (CV), galvanostatic charge/discharge (GCD), and assessment of cyclic stability. The analysis of the CV results indicated that the MSCs achieved the areal capacitance of 5.78 mF/cm2 at 5 mV/s. After 5000 cycles at a current density of 0.05 mA/cm2, the capacitance retention rate was 85.4%. The high areal capacitance and strong cycle stability of MSCs highlight the potential of PEDOT/reduced graphene oxide (PEDOT/rGO) electrodes in electrode applications.

Electrochemical coverage of reduced graphene oxide layers on sulfur supported by biochar for enhancing performance of Li-S battery

To improve the electrochemical performance of Li-S batteries, a cathodic material (rGO150/S/CF-75) was fabricated for Li-S batteries by adopting a melt-flow method to load sulfur on biomass-derived carbon fibers, then the reduced graphene oxide was electrochemically covered on the outside surface of the sulfur. The coverage of reduced graphite oxide layers endows the performance of S/CF-75 multiple improvements. The specific capacity of rGO150/S/CF-75 cathode delivers a specific capacity of 1451.4 mAh g-1 at 0.1 A g-1. The specific capacity of rGO150/S/CF-75 cathode can still maintain 537.3 mAh g-1 after 1000 cycles at 5 A g-1 (109 % capacity retention). The excellent performance of rGO150/S/CF-75 cathode is benefit from not only the conductive paths of reduced graphene oxide layers and protective function of reduced graphene oxide layers inhibiting that the soluble sulfur diffuse into bulk electrolyte, but also the redistribution of sulfur on conductive carbon components during the cycling process.

Advanced Nanostructured Materials for Electrocatalysis in Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are considered as among the most promising electrochemical energy storage devices due to their high theoretical energy density and low cost. However, the inherently complex electrochemical mechanism in Li-S batteries leads to problems such as slow internal reaction kinetics and a severe shuttle effect, which seriously affect the practical application of batteries. Therefore, accelerating the internal electrochemical reactions of Li-S batteries is the key to realize their large-scale applications. This article reviews significant efforts to address the above problems, mainly the catalysis of electrochemical reactions by specific nanostructured materials. Through the rational design of homogeneous and heterogeneous catalysts (including but not limited to strategies such as single atoms, heterostructures, metal compounds, and small-molecule solvents), the chemical reactivity of Li-S batteries has been effectively improved. Here, the application of nanomaterials in the field of electrocatalysis for Li-S batteries is introduced in detail, and the advancement of nanostructures in Li-S batteries is emphasized.

In Situ Constructing a Stable Solid Electrolyte Interface by Multifunctional Electrolyte Additive to Stabilize Lithium Metal Anodes for Li-S Batteries

Lithium (Li) metal is considered to be the most promising anode due to the ultrahigh capacity and extremely low electrochemical potential. The tricky thing is that the growth of dendritic Li brings huge safety hazards to Li metal batteries. Herein, we demonstrate cerium nitrate as a multifunctional electrolyte additive to form a stable solid electrolyte interface on the metallic Li anode surface for durable Li-S batteries. The presence of Ce³⁺ helps to modulate the electroplating/stripping of Li and inhibits the growth of dendritic Li. An excellent cycle life exceeding 1400 h at the current density of 1 mA cm^-2 can be realized in symmetric Li||Li cells. In addition, the in situ formed robust solid-electrolyte interface (SEI) layer containing cerium sulfide on the Li anode surface conduces to weaken the reducibility of Li and regulate the electrochemical dissolution/deposition reaction on the Li anode. Surprisingly, by virtue of cerium nitrate additive with a low concentration of 0.03 M, the Li-S batteries can afford a capacity of 553 mA h g^-1 at 5 C and a long cycle life at 1 C with a high capacity retention of 70.4%. Therefore, this study provides a novel idea to realize a uniform and dendrite-free Li anode for practical Li-S batteries.