Protective Spinel Coating for Li1.17Ni0.17Mn0.50Co0.17O2 Cathode for Li-Ion Batteries through Single-Source Precursor Approach

Limiting voltage and capacity fade of lithium-rich, low cobalt Li1.2Ni0.13Mn0.54Fe0.1Co0.03O2 by controlling the upper cut-off voltage

A new Li1.2Ni0.13Mn0.54Fe0.1Co0.03O2 material with a higher content of Fe and lower content of Co was designed via a simple sol-gel method. Moreover, the effect of upper cut-off voltage on the structural stability, capacity and voltage retention was studied. The Li1.2Ni0.13Mn0.54Fe0.1Co0.03O2 electrode delivers a discharge capacity of 250 mA h g-1 with good capacity retention and coulombic efficiency at 4.6 V cut-off voltage. Importantly, improved voltage retention of 94% was achieved. Ex situ XRD and Raman proved that the electrodes cycled at 4.8 V cut-off voltage showed huge structural conversion from layered-to-spinel explaining the poor capacity and voltage retention at this cut-off voltage. In addition, ex situ FT-IR demonstrates that the upper cut-off voltage of 4.8 V exhibits a higher intensity of SEI-related peaks than 4.6 V, suggesting that reducing the upper cut-off voltage can inhibit the growth of the SEI layer. In addition, when the Li1.2Ni0.13Mn0.54Fe0.1Co0.03O2 cathode was paired with a synthesized phosphorus-doped TiO2 anode (P-doped TiO2) in a complete battery cell, it exhibits good capacity and cycling stability at 1C rate. The material developed in this study represents a promising approach for designing high-performance Li-rich, low cobalt cathodes for next-generation lithium-ion batteries.

Electrochemical Performance of Layer-Structured Ni0.8Co0.1Mn0.1O2 Cathode Active Materials Synthesized by Carbonate Co-Precipitation

The layered Ni-rich NiCoMn (NCM)-based cathode active material Li[Ni_xCo_(1-x)/2Mn_(1-x)/2]O₂ (x ≥ 0.6) has the advantages of high energy density and price competitiveness over an LiCoO₂-based material. Additionally, NCM is beneficial in terms of its increasing reversible discharge capacity with the increase in Ni content; however, stable electrochemical performance has not been readily achieved because of the cation mixing that occurs during its synthesis. In this study, various layer-structured Li_1.0[Ni_0.8Co_0.1Mn_0.1]O₂ materials were synthesized, and their electrochemical performances were investigated. A NiCoMnCO₃ precursor, prepared using carbonate co-precipitation with Li₂CO₃ as the lithium source and having a sintering temperature of 850 °C, sintering time of 25 h, and metal to Li molar ratio of 1.00-1.05 were found to be the optimal parameters/conditions for the preparation of Li_1.0[Ni_0.8Co_0.1Mn_0.1]O₂. The material exhibited a discharge capacity of 160 mAhg^-1 and capacity recovery rate of 95.56% (from a 5.0-0.1 C-rate).

Understanding anion-redox reactions in cathode materials of lithium-ion batteries throughin situcharacterization techniques: a review

As the demand for rechargeable lithium-ion batteries (LIBs) with higher energy density increases, the interest in lithium-rich oxide (LRO) with extraordinarily high capacities is surging. The capacity of LRO cathodes exceeds that of conventional layered oxides. This has been attributed to the redox contribution from both cations and anions, either sequentially or simultaneously. However, LROs with notable anion redox suffer from capacity loss and voltage decay during cycling. Therefore, a fundamental understanding of their electrochemical behaviors and related structural evolution is a prerequisite for the successful development of high-capacity LRO cathodes with anion redox activity. However, there is still controversy over their electrochemical behavior and principles of operation. In addition, complicated redox mechanisms and the lack of sufficient analytical tools render the basic study difficult. In this review, we aim to introduce theoretical insights into the anion redox mechanism andin situanalytical instruments that can be used to prove the mechanism and behavior of cathodes with anion redox activity. We summarized the anion redox phenomenon, suggested mechanisms, and discussed the history of development for anion redox in cathode materials of LIBs. Finally, we review the recent progress in identification of reaction mechanisms in LROs and validation of engineering strategies to improve cathode performance based on anion redox through various analytical tools, particularly,in situcharacterization techniques. Because unexpected phenomena may occur during cycling, it is crucial to study the kinetic properties of materialsin situunder operating conditions, especially for this newly investigated anion redox phenomenon. This review provides a comprehensive perspective on the future direction of studies on materials with anion redox activity.

Application of Electrospun Nanofibers for Fabrication of Versatile and Highly Efficient Electrochemical Devices: A Review

Electrochemical devices convert chemical reactions into electrical energy or, vice versa, electricity into a chemical reaction. While batteries, fuel cells, supercapacitors, solar cells, and sensors belong to the galvanic cells based on the first reaction, electrolytic cells are based on the reversed process and used to decompose chemical compounds by electrolysis. Especially fuel cells, using an electrochemical reaction of hydrogen with an oxidizing agent to produce electricity, and electrolytic cells, e.g., used to split water into hydrogen and oxygen, are of high interest in the ongoing search for production and storage of renewable energies. This review sheds light on recent developments in the area of electrospun electrochemical devices, new materials, techniques, and applications. Starting with a brief introduction into electrospinning, recent research dealing with electrolytic cells, batteries, fuel cells, supercapacitors, electrochemical solar cells, and electrochemical sensors is presented. The paper concentrates on the advantages of electrospun nanofiber mats for these applications which are mostly based on their high specific surface area and the possibility to tailor morphology and material properties during the spinning and post-treatment processes. It is shown that several research areas dealing with electrospun parts of electrochemical devices have already reached a broad state-of-the-art, while other research areas have large space for future investigations.

Ni-Rich Layered Oxide with Preferred Orientation (110) Plane as a Stable Cathode Material for High-Energy Lithium-Ion Batteries

The cathode, a crucial constituent part of Li-ion batteries, determines the output voltage and integral energy density of batteries to a great extent. Among them, Ni-rich LiNi_xCo_yMn_zO₂ (x + y + z = 1, x ≥ 0.6) layered transition metal oxides possess a higher capacity and lower cost as compared to LiCoO₂, which have stimulated widespread interests. However, the wide application of Ni-rich cathodes is seriously hampered by their poor diffusion dynamics and severe voltage drops. To moderate these problems, a nanobrick Ni-rich layered LiNi_0.6Co_0.2Mn_0.2O₂ cathode with a preferred orientation (110) facet was designed and successfully synthesized via a modified co-precipitation route. The galvanostatic intermittent titration technique (GITT) and electrochemical impedance spectroscopy (EIS) analysis of LiNi_0.6Co_0.2Mn_0.2O₂ reveal its superior kinetic performance endowing outstanding rate performance and long-term cycle stability, especially the voltage drop being as small as 67.7 mV at a current density of 0.5 C for 200 cycles. Due to its unique architecture, dramatically shortened ion/electron diffusion distance, and more unimpeded Li-ion transmission pathways, the current nanostructured LiNi_0.6Co_0.2Mn_0.2O₂ cathode enhances the Li-ion diffusion dynamics and suppresses the voltage drop, thus resulting in superior electrochemical performance.