Narrowband Light Reflection Resonances from Waveguide Modes for High-Quality Sensors

Non-polarized and ultra-narrow band filter in MIR based on multilayer metasurface

We propose an ultra narrow-band filter in the mid infrared region (MIR) using artificial metamaterials (AMM), which is suitable for the design of on-chip photonic spectrometers. 2-D rectangular holes with a cross-like layerout are adopted to enhance the filter's efficiency and precision. Considering the penetration depth of electromagnetic (EM) waves in the metal film, we opt for multi-layer films composed of metal layers and dielectric layers, instead of a single metal layer, to improve the structure's performance in the MIR. This multilayer configuration significantly enhances the efficiency and precision of the AMM structures in the MIR. The transmission peak, with a full width at half maximum (FWHM) of 30 nm, can be achieved and tuned in the wavelength range from 3.0 μm to 10.0 μm by changing the periods of the unit cell (enlarging the unit cell from 3.0 to 10.0 μm). The proposed AMM structures, with tunable narrow band transmittance in MIR, exhibit promising potential in the fabrication of narrow band photonic detectors and on-chip spectrometers.

Tunable Antireflection Properties with Self-Assembled Nanopillar and Nanohole Structure

Nanostructure engineering has proven to be one of the most effective strategies to improve the efficiency of photoelectric devices. Herein, we numerically investigate and experimentally demonstrate a self-assembled silicon-based nanopillars and nanoholes structures, to improve the light absorption of photoelectric devices by an antireflection enhancement. The nanopillars and nanoholes structures are fabricated by the air-liquid interface self-assembly method based on polystyrene (PS) nanospheres. Additionally, the tunable antireflective properties with the different operation wavelength and nanostructures parameters have been discussed based on the Finite-Difference Time-Domain (FDTD) method. The experimental result shows that the self-assembled silicon-based nanopillars and nanoholes structures can achieve the lowest reflectivity of 1.42% (nanopillars) and 5.83% (nanoholes) in the wavelength range of 250-800 nm, which reduced 95.97% and 84.83%, respectively, compared with the plane silicon. The operation mechanism of the tunable antireflective property of self-assembled nanopillars and nanoholes structures is also analyzed in the simulation. Our study suggests that the self-assembled nanopillars and nanoholes structures are potentially attractive as improving efficiency of photoelectric devices.

Towards scalable plasmonic Fano-resonant metasurfaces for colorimetric sensing

Transitioning plasmonic metasurfaces into practical, low-cost applications requires meta-atom designs that focus on ease of manufacturability and a robustness with respect to structural imperfections and nonideal substrates. It also requires the use of inexpensive, earth-abundant metals such as Al for plasmonic properties. In this study, we focus on combining two aspects of plasmonic metasurfaces-visible coloration and Fano resonances-in a morphology amenable to scalable manufacturing. The resulting plasmonic metasurface is a candidate for reflective colorimetric sensing. We examine the potential of this metasurface for reflective strain sensing, where the periodicity of the meta-atoms could ultimately be modified by a potential flexion, and for localized surface plasmon resonance refractive index sensing. This study evaluates the potential of streamlined meta-atom design combined with low-cost metallization for inexpensive sensor readout based on human optical perception.

Optical Fiber-Based Continuous Liquid Level Sensor Based on Rayleigh Backscattering

This work reports an optical fiber-based continuous liquid level sensor for cryogenic propellant mass gauging, which has significant advantages over the existing liquid level sensors in terms of accuracy, simplicity, and reliability. Based on Rayleigh backscattering coherent optical frequency domain reflectometry, every point of the sensing fiber is a liquid sensor which is able to distinguish liquid and vapor. We obtained a measurement accuracy of 1 mm for the optical fiber sensor by measuring both liquid nitrogen and water levels. For the first time, for practical applications, we experimentally studied the influence of ambient temperature and strain changes on the sensing performance as well as the repeatability of the optical fiber-based liquid level sensor's measurements.

The Light Absorption Enhancement in Graphene Monolayer Resulting from the Diffraction Coupling of Surface Plasmon Polariton Resonance

In this study, we investigate a physical mechanism to improve the light absorption efficiency of graphene monolayer from the universal value of 2.3% to about 30% in the visible and near-infrared wavelength range. The physical mechanism is based on the diffraction coupling of surface plasmon polariton resonances in the periodic array of metal nanoparticles. Through the physical mechanism, the electric fields on the surface of graphene monolayer are considerably enhanced. Therefore, the light absorption efficiency of graphene monolayer is greatly improved. To further confirm the physical mechanism, we use an interaction model of double oscillators to explain the positions of the absorption peaks for different array periods. Furthermore, we discuss in detail the emerging conditions of the diffraction coupling of surface plasmon polariton resonances. The results will be beneficial for the design of graphene-based photoelectric devices.

Low-Threshold Nanolaser Based on Hybrid Plasmonic Waveguide Mode Supported by Metallic Grating Waveguide Structure

A high Q-factor of the nanocavity can effectively reduce the threshold of nanolasers. In this paper, a modified nanostructure composed of a silver grating on a low-index dielectric layer (LID) and a high-index dielectric layer (HID) was proposed to realize a nanolaser with a lower lasing threshold. The nanostructure supports a hybrid plasmonic waveguide mode with a very-narrow line-width that can be reduced to about 1.79 nm by adjusting the thickness of the LID/HID layer or the duty ratio of grating, and the Q-factor can reach up to about 348. We theoretically demonstrated the lasing behavior of the modified nanostructures using the model of the combination of the classical electrodynamics and the four-level two-electron model of the gain material. The results demonstrated that the nanolaser based on the hybrid plasmonic waveguide mode can really reduce the lasing threshold to 0.042 mJ/cm², which is about three times lower than the nanolaser based on the surface plasmon. The lasing action can be modulated by the thickness of the LID layer, the thickness of the HID layer and the duty cycle of grating. Our findings could provide a useful guideline to design low-threshold and highly-efficient miniaturized lasers.

Multipolar Plasmonic Resonances of Aluminum Nanoantenna Tuned by Graphene

We numerically investigate the multipolar plasmonic resonances of Aluminum nanoantenna tuned by a monolayer graphene from ultraviolet (UV) to visible regime. It is shown that the absorbance of the plasmonic odd modes (l = 1 and l = 3) of graphene-Al nanoribbon structure is enhanced while the absorption at the plasmonic even modes (l = 2) is suppressed, compared to the pure Al nanoribbon structure. With the presence of the monolayer graphene, a change in the resonance strength of the multipolar plasmonic modes results from the near field interactions of the monolayer graphene with the electric fields of the multipolar plasmonic resonances of the Al resonator. In particular, a clear absorption peak with a high quality (Q)-factor of 27 of the plasmonic third-order mode (l = 3) is realized in the graphene-Al nanoribbon structure. The sensitivity and figure of merit of the plasmonic third-order mode of the proposed Graphene-Al nanoribbon structure can reach 25 nm/RIU and 3, respectively, providing potential applications in optical refractive-index sensing.