Synthesis of Mo2C by Thermal Decomposition of Molybdenum Blue Nanoparticles

Intensification of Dry Reforming of Methane on Membrane Catalyst: Confirmation and Development of the Hypothesis

This article presents an analysis of kinetic studies of dry methane reforming (DRM) in a reactor with a membrane catalyst (RMC) in the modes of a contactor with "diffusion" and "forced" mass transfer. Comparison of the specific rate constants of the methane dissociation reaction in membrane and traditional reactors confirmed the phenomenon of intensification of dry methane reforming in a membrane catalyst (MC). It has been experimentally established that during DRM, a temperature gradient arises in the channels of the pore structure of the membrane catalyst, characterized by a decrease in temperature towards the inner volume of the MC, and initiates the phenomenon of thermal slip. The features of this phenomenon are highlighted and must be considered in the analysis of kinetic data. The main provisions of the hypothesis explaining the effect of intensification by the occurrence of thermal slip in the channels of the pore structure of the MC are formulated. The proposed hypothesis, based on thermal slip, explains the difference in rate constants of traditional and membrane catalysts, and substantiates the phenomenological scheme of DRM stages in a reactor with a membrane catalyst.

Metal (Mo, W, Ti) Carbide Catalysts: Synthesis and Application as Alternative Catalysts for Dry Reforming of Hydrocarbons-A Review

Dry reforming of hydrocarbons (DRH) is a pro-environmental method for syngas production. It owes its pro-environmental character to the use of carbon dioxide, which is one of the main greenhouse gases. Currently used nickel catalysts on oxide supports suffer from rapid deactivation due to sintering of active metal particles or the deposition of carbon deposits blocking the flow of gases through the reaction tube. In this view, new alternative catalysts are highly sought after. Transition metal carbides (TMCs) can potentially replace traditional nickel catalysts due to their stability and activity in DR processes. The catalytic activity of carbides results from the synthesis-dependent structural properties of carbides. In this respect, this review presents the most important methods of titanium, molybdenum, and tungsten carbide synthesis and the influence of their properties on activity in catalyzing the reaction of methane with carbon dioxide.

Formation of Molybdenum Blue Nanoparticles in the Organic Reducing Area

Molybdenum blue dispersions were synthesized by reducing an acidic molybdate solution with glucose, hydroquinone and ascorbic acid. The influence of the H/Mo molar ratio on the rate of formation of molybdenum particles was established. For each reducing agent, were determined the rate constant and the order of the particle formation and were established the conditions for the formation of aggregative stable dispersion with the maximum concentration of particles. The dispersed phase is represented by toroidal molybdenum oxide nanoclusters, which was confirmed by the results of UV/Vis, FTIR, XPS spectroscopy and DLS.

Simple Synthesis of Molybdenum Carbides from Molybdenum Blue Nanoparticles

In recent years, much attention has been paid to the development of a new flexible and variable method for molybdenum carbide (Mo₂C) synthesis. This work reports the applicability of nano-size clusters of molybdenum blue to molybdenum carbide production by thermal treatment of molybdenum blue xerogels in an inert atmosphere. The method developed made it possible to vary the type (glucose, hydroquinone) and content of the organic reducing agent (molar ratio R/Mo). The effect of these parameters on the phase composition and specific surface area of molybdenum carbides and their catalytic activity was investigated. TEM, UV–VIS spectroscopy, DTA, SEM, XRD, and nitrogen adsorption were performed to characterize nanoparticles and molybdenum carbide. The results showed that, depending on the synthesis conditions, variants of molybdenum carbide can be formed: α-Mo₂C, η-MoC, or γ-MoC. The synthesized samples had a high specific surface area (7.1–203.0 m²/g) and meso- and microporosity. The samples also showed high catalytic activity during the dry reforming of methane. The proposed synthesis method is simple and variable and can be successfully used to obtain both Mo₂C-based powder and supports catalysts.

Molybdenum-Tungsten Blue Nanoparticles as a Precursor for Ultrafine Binary Carbides

Herein, we demonstrate a promising method for the synthesis of ultrafine carbide particles using dispersions of molybdenum–tungsten nanoparticles. Dispersions of molybdenum–tungsten blue nanoparticles with different initial molar ratios of molybdenum/tungsten were synthesized through the reduction of molybdate and tungstate ions by ascorbic acid in an acidic medium (pH = 1.0–2.5). Molybdenum–tungsten blue nanoparticles were characterized by ultraviolet–visual (UV–VIS), infrared (FTIR), and X-ray photoelectron (XPS) spectroscopies; transmission electronic microscopy (TEM); and dynamic light scattering (DLS). We demonstrated that molybdenum–tungsten blue nanoparticles belong to toroidal polyoxometalate clusters (λ_max = 680–750 nm) with a predominant particle size of 4.0 nm. Molybdenum–tungsten blue dispersions were shown to be monodispersed systems with a small particle size and long-term stability (>30 days) and are suitable for further catalytic applications.

Synthesis of Microporous Mo2C-W2C Binary Carbides by Thermal Decomposition of Molybdenum-Tungsten Blues

Molybdenum and tungsten carbides are perspective catalytic systems. Their activity in many reactions is comparable to the activity of platinum group metals. The development of the synthesis method for of highly dispersed binary molybdenum and tungsten carbides is an important task. Dispersions of molybdenum-tungsten blue were used as a precursor for synthesis of binary molybdenum and tungsten carbides. The synthesis of carbides was carried out by thermal decomposition of molybdenum-tungsten blue xerogels in an inert atmosphere. The binary carbides were characterized by XRD, TGA, SEM and nitrogen adsorption. The influence of the molar ratio reducing agent/Me [R]/[ΣMe], molar ratio molybdenum/tungsten [Mo]/[W] on phase composition, and morphology and porous structure of binary carbides was investigated. Samples of binary molybdenum and tungsten carbides with a highly developed porous structure and a specific surface area were synthesized.