Co-Zn-MOFs Derived N-Doped Carbon Nanotubes with Crystalline Co Nanoparticles Embedded as Effective Oxygen Electrocatalysts

Graphdiyne and Nitrogen-Doped Graphdiyne Nanotubes as Highly Efficient Electrocatalysts for Oxygen Reduction Reaction

Electrocatalysts with high efficiency and low cost are always urgently needed for oxygen reduction reaction (ORR). As a new carbon allotrope, graphdiyne (GDY) has received much attention due to its unique chemical structure containing sp- and sp2-hybridized carbons, and intrinsic electrochemical activity ascribed to its inherent conductivity. Herein, we prepared two graphdiyne materials named GDY nanotube and nitrogen-doped GDY (NGDY) nanotube via cross-coupling reactions on the surface of Cu nanowires. As metal-free catalysts, their electrocatalytic activities for ORR were demonstrated. The results showed that the NGDY nanotube presents more excellent electrochemical performance than that of the GDY nanotube, including more positive potential and faster kinetics and charge transfer process. The improvement can be ascribed to the greater number of structural electrocatalytic active sites from nitrogen atoms as well as the hollow nanotube morphology, which is beneficial to the adsorption of oxygen and acceleration of the catalytic reaction. This work helps develop high-quality graphdiyne-based electrocatalysts with well-defined chemical structures and morphologies for various electrochemical reactions.

Co3O4 Supported on Graphene-like Carbon by One-Step Calcination of Cobalt Phthalocyanine for Efficient Oxygen Reduction Reaction under Alkaline Medium

Exploiting cost-effective and durable non-platinum electrocatalysts for oxygen reduction reaction (ORR) is of great significance for the development of abundant renewable energy conversion and storage technologies. Herein, a series of Co₃O₄ supported on graphene-like carbon (Co₃O₄/C) samples were firstly effectively synthesized by one-step calcination of cobalt phthalocyanine and their electrocatalytic performances were measured for ORR under an alkaline medium. By systematically adjusting the calcination temperature of cobalt phthalocyanine, we found that the material pyrolyzed at 750 °C (Co₃O₄/C-750) shows the best ORR electrocatalytic performance (half-wave potentials of 0.77 V (vs. RHE) in 0.1 M KOH) among all the control samples. Moreover, it displays better stability and superior methanol tolerance than commercial 20% Pt/C. The further electrochemical test results reveal that the process is close in characteristics to the four-electron ORR process on Co₃O₄/C-750. In addition, Co₃O₄/C-750 applied in the zinc-air battery presents 1.34 V of open circuit potential. Based on all the characterizations, the enhanced electrocatalytic performances of Co₃O₄/C-750 composite should be ascribed to the synergistic effect between Co₃O₄ and the graphene-like carbon layer structure produced by pyrolysis of cobalt phthalocyanine, as well as its high specific surface area.

Nanofiber-Based Oxygen Reduction Electrocatalysts with Improved Mass Transfer Kinetics in a Meso-Porous Structure and Enhanced Reaction Kinetics by Confined Fe and Fe3C Particles for Anion-Exchange Membrane Fuel Cells

The development of high-performance nonprecious metal catalysts for oxygen reduction reactions is critical for the commercialization of fuel cells. In this paper, we report a non-precious catalyst with high-performance, in which Fe and Fe3C is embedded in nitrogen-doped carbon nanofibers (MIL-N-CNFs) by co-electrospinning Fe-MIL and polyacrylonitrile (PAN) and pyrolyzing. The mass ratio of Fe-MIL to PAN in the precursors and the pyrolysis temperature were optimized to be 1.5 and treated at 800 °C, respectively. The optimized catalyst exhibited an onset potential of 0.950 V and a half-wave potential of 0.830 V in alkaline electrolytes, thanks to the improved mass transfer kinetics in a meso-porous structure and enhanced reaction kinetics by confined Fe and Fe3C particles. Additionally, the optimized catalyst showed a better methanol tolerance than the commercial 20 wt.% Pt/C, indicating a potential application in direct methanol fuel cells. Serving as the cathode in CCM, the anion-exchange membrane fuel cell reaches a power density of 192 mW cm−2 at 428 mA cm−2 and 80 °C.

Zn-MOF decorated bio activated carbon for photocatalytic degradation, oxygen evolution and reduction catalysis

An emerging global necessity for alternative resources combined with maximum catalytic efficiency, low cost, and eco-friendly composite remains a hotspot in the scientific society. Hereby, a novel protocol is approached to design a heterostructure of Zinc MOF decorated on the surface of 2D activated carbon (AC) through a simplistic approach. To begin with, analytical, morphological and spectroscopical studies were performed to identify the functional moieties, cruciate-flower like morphology and oxidative state of atoms present in the composite Zn-MOF @AC. The photocatalytic material aids in degrading both cationic and anionic dye in a UV (254 nm) irradiated environment at a rate of 86.4% and 77.5% within 90 mins. Subsequently, the hybrid materials are coated on the carbon substrate to evaluate the catalytic activity using oxygen evolution and reduction reaction process. The mechanical insight for the catalytic activity relies on the electronic transitions of atoms on the edges of the sheets ascribing to d-d energy levels between the interfacial electron movement. Our composite exhibits an overpotential of 0.7 V and a Tafel slope of 70 mV/dec for the oxygen reduction reaction. This study proposes an alternate approach for developing MOF decorated carbon-based composites for photocatalytic degradability and energy necessity.

Metal-Organic Framework Reinforced Acrylic Polymer Marine Coatings

Metal-organic frameworks (MOFs), a class of crystalline, porous, 3D materials synthesized by the linking of metal nodes and organic linkers are rapidly emerging as attractive materials in gas storage, electrodes in batteries, super-capacitors, sensors, water treatment, and medicine etc. However the utility of MOFs in coatings, especially in marine coatings, has not been thoroughly investigated. In this manuscript we report the first study on silver MOF (Ag-MOF) functionalized acrylic polymers for marine coatings. A simple and rapid microwave technique was used to synthesize a two-dimensional platelet structured Ag-MOF. Field tests on the MOF reinforced marine coatings exhibited an antifouling performance, which can be attributed to the inhibition of marine organisms to settle as evidenced by the anti-bacterial activity of Ag-MOFs. Our results indicate that MOF based coatings are highly promising candidates for marine coatings.

High-Level Oxygen Reduction Catalysts Derived from the Compounds of High-Specific-Surface-Area Pine Peel Activated Carbon and Phthalocyanine Cobalt

Non-platinum carbon-based catalysts have attracted much more attention in recent years because of their low cost and outstanding performance, and are regarded as one of the most promising alternatives to precious metal catalysts. Activated carbon (AC), which has a large specific surface area (SSA), can be used as a carrier or carbon source at the same time. In this work, stable pine peel bio-based materials were used to prepare large-surface-area activated carbon and then compound with cobalt phthalocyanine (CoPc) to obtain a high-performance cobalt/nitrogen/carbon (Co-N-C) catalyst. High catalytic activity is related to increasing the number of Co particles on the large-specific-area activated carbon, which are related with the immersing effect of CoPc into the AC and the rational decomposed temperature of the CoPc ring. The synergy with N promoting the exposure of CoNx active sites is also important. The Eonset of the catalyst treated with a composite proportion of AC and CoPc of 1 to 2 at 800 °C (AC@CoPc-800-1-2) is 1.006 V, higher than the Pt/C (20 wt%) catalyst. Apart from this, compared with other AC/CoPc series catalysts and Pt/C (20 wt%) catalyst, the stability of AC/CoPc-800-1-2 is 87.8% in 0.1 M KOH after 20,000 s testing. Considering the performance and price of the catalyst in a practical application, these composite catalysts combining biomass carbon materials with phthalocyanine series could be widely used in the area of catalysts and energy storage.

Tuning CuZn interfaces in metal–organic framework-derived electrocatalysts for enhancement of CO2 conversion to C2 products

CuZn alloy derived from a metal–organic framework shows a 5-fold enhancement in faradaic efficiency for CO2 reduction to C2 products compared to Cu alone. Density functional theory calculation provides important mechanistic insights.