Fabrication of Silver-Decorated Graphene Oxide Nanohybrids via Pulsed Laser Ablation with Excellent Antimicrobial and Optical Limiting Performance

Investigations on the Nonlinear Optical Properties of 0D, 1D, and 2D Boron Nitride Nanomaterials in the Visible Spectral Region

In recent years, boron nitride nanomaterials have attracted increasing attention due to their unique properties such as high temperature stability and high thermal conductivity. They are structurally analogous to carbon nanomaterials and can also be generated as zero-dimensional nanoparticles and fullerenes, one-dimensional nanotubes and nanoribbons, and two-dimensional nanosheets or platelets. In contrast to carbon-based nanomaterials, which have been extensively studied during recent years, the optical limiting properties of boron nitride nanomaterials have hardly been analysed so far. This work summarises a comprehensive study on the nonlinear optical response of dispersed boron nitride nanotubes, boron nitride nanoplatelets, and boron nitride nanoparticles using nanosecond laser pulses at 532 nm. Their optical limiting behaviour is characterised by means of nonlinear transmittance and scattered energy measurements and a beam profiling camera is used to analyse the beam characteristics of the transmitted laser radiation. Our results show that nonlinear scattering dominates the OL performance of all measured boron nitride nanomaterials. Boron nitride nanotubes show a large optical limiting effect, much stronger than the benchmark material, multi-walled carbon nanotubes, which makes them promising for laser protection applications.

Fluorescence and Nonlinear Optical Response of Graphene Quantum Dots Produced by Pulsed Laser Irradiation in Toluene

Graphene quantum dots (GQDs), the zero dimensional (0D) single nanostructures, have many exciting technological applications in diversified fields such as sensors, light emitting devices, bio imaging probes, solar cells, etc. They are emerging as a functional tool to modulate light by means of molecular engineering due to its merits, including relatively low extend of loss, large outstretch of spatial confinement and control via doping, size and shape. In this article, we present a one pot, facile and ecofriendly synthesis approach for fabricating GQDs via pulsed laser irradiation of an organic solvent (toluene) without any catalyst. It is a promising synthesis choice to prepare GQDs due to its fast production, lack of byproducts and further purification, as well as the control over the product by accurate tuning of laser parameters. In this work, the second (532 nm) and third harmonic (355 nm) wavelengths of a pulsed nanosecond Nd:YAG laser have been employed for the synthesis. It has been found that the obtained GQDs display fluorescence and is expected to have potential applications in optoelectronics and light-harvesting devices. In addition, nonlinear optical absorption of the prepared GQDs was measured using the open aperture z-scan technique (in the nanosecond regime). These GQDs exhibit excellent optical limiting properties, especially those synthesized at 532 nm wavelength.

Nanohybrids of oxides nanoparticles-chitosan and their antimicrobial properties

Growing international problem with pathogens acquiring resistance to antibiotics is the reason for the search for bactericidal substances against which microorganisms cannot become resistant. The aim of this study was to synthesize inorganic-organic nanohybrids and obtain materials with antimicrobial effects. Chitosan (CS) was deposited on nanocomposite carriers such as calcium oxide with titanium dioxide (CaO-TiO₂), magnesium oxide with titanium dioxide (MgO-TiO₂) and copper(II) oxide with titanium dioxide (CuO-TiO₂). The efficiency of the process was examined at varying concentrations of chitosan and temperature. The parameters for nanohybrids synthesis were selected based on the highest amount of nano-chitosan deposited on the nanohybrids-for each carrier, the process conditions were as follows: chitosan solution at 5 g l^-1and 20 °C. The materials were obtained using these parameters and were used for microbiological tests againstE. coliATCC 25922,S. aureusATCC 25923 andC. albicansATCC 10231. The growth inhibitory activity of the obtained materials was qualitatively defined. These results suggest that the synthesized nanohybrids and nanocomposites exhibit biostatic action. The material with the broadest effect was the CuO-TiO₂-CS hybrid, which had biostatic properties against all tested strains at a minimal concentration of 1250μg ml^-1. Further research is required to find eco-friendly, non-toxic, and more effective antimicrobials with a broad action to prevent the acquisition of resistance.

Biotin-streptavidin sandwich integrated PDA-ZnO@Au nanocomposite based SPR sensor for hIgG detection

SPR is a mature optical biosensor technology for detecting biomolecular interactions without fluorescence or enzyme labeling. In this paper, we acquire a sensitive SPR biosensor based on ZnO@Au nanomaterial, and the classical sandwich strategy using biotin-streptavidin for secondary signal amplification system was used to detect human IgG (hIgG). Nano-zinc oxide (ZnO) has the dual characteristics of nanocomposite and traditional zinc oxide, with large specific surface area and high chemical activity. Besides, the gold-coated ZnO nanocrystals improve the optical properties of ZnO and enlarge the loading capacity with better biocompatibility. Therefore, a sensing platform based on PDA-ZnO@Au nanomaterial was constructed on gold film modified with mercaptan. Meanwhile, the biotin-avidin system in SPR sensor field has been rapidly developed and applied. Due to the highly selection of streptavidin (SA) and biotin interact with each other, GNRs-SA-biotin-Ab₂ (GSAB-Ab₂) were constructed to obtain the secondary enhancement of SPR signal. The influences of experimental conditions were also discussed. With optimal experimental conditions, introducing GSAB-Ab₂ conjugate combined with a sandwich format, the resulting SPR biosensor provides a favourable range for hIgG determination of 0.0375-40 μg mL^-1. The minimum detection concentration of hIgG that can be obtained by this method is approximately 67-fold lower than the conventional SPR sensor based on gold film. The sensitivity of SPR biosensor is significantly improved in a certain range.

Surface-Enhanced Raman Sensing of Semi-Volatile Organic Compounds by Plasmonic Nanostructures

Facile detection of indoor semi-volatile organic compounds (SVOCs) is a critical issue to raise an increasing concern to current researchers, since their emissions have impacted the health of humans, who spend much of their time indoors after the recent incessant COVID-19 pandemic outbreaks. Plasmonic nanomaterial platforms can utilize an electromagnetic field to induce significant Raman signal enhancements of vibrational spectra of pollutant molecules from localized hotspots. Surface-enhanced Raman scattering (SERS) sensing based on functional plasmonic nanostructures has currently emerged as a powerful analytical technique, which is widely adopted for the ultra-sensitive detection of SVOC molecules, including phthalates and polycyclic aromatic hydrocarbons (PAHs) from household chemicals in indoor environments. This concise topical review gives updated recent developments and trends in optical sensors of surface plasmon resonance (SPR) and SERS for effective sensing of SVOCs by functionalization of noble metal nanostructures. Specific features of plasmonic nanomaterials utilized in sensors are evaluated comparatively, including their various sizes and shapes. Novel aptasensors-assisted SERS technology and its potential application are also introduced for selective sensing. The current challenges and perspectives on SERS-based optical sensors using plasmonic nanomaterial platforms and aptasensors are discussed for applying indoor SVOC detection.

A detection method of Escherichia coli O157:H7 based on immunomagnetic separation and aptamers-gold nanoparticle probe quenching Rhodamine B's fluorescence: Escherichia coli O157:H7 detection method based on IMS and Apt-AuNPs probe quenching Rho B' s fluorescence

This research aimed to detect Escherichia coli O157:H7 in milk based on immunomagnetic probe separation technology and quenching effect of gold nanoparticles to Rhodamine B. Streptavidin-modified magnetic beads (MBs) were combined with biotin-modified antibodies to capture E. coli O157:H7 specifically. Gold nanoparticle (AuNPs) was incubated with sulfhydryl-modified aptamers (SH-Aptamers) to obtain the Aptamers-AuNPs probe. After magnetic beads captured target bacteria and formed a sandwich structure with the gold nanoprobe, Rhodamine B was added into complex to obtain fluorescent signal changes. Our results demonstrated that the established method could detect E. coli O157:H7 in the range of 101-107 CFU/mL, and the limit of detection (LOD) was 0.35 CFU/mL in TBST buffer (pH = 7.4). In milk simulation samples, the LOD of this method was 1.03 CFU/mL. Our research provides a promising approach on the detection of E. coli O157:H7.

An Overview of Functionalized Graphene Nanomaterials for Advanced Applications

Interest in the development of graphene-based materials for advanced applications is growing, because of the unique features of such nanomaterials and, above all, of their outstanding versatility, which enables several functionalization pathways that lead to materials with extremely tunable properties and architectures. This review is focused on the careful examination of relationships between synthetic approaches currently used to derivatize graphene, main properties achieved, and target applications proposed. Use of functionalized graphene nanomaterials in six engineering areas (materials with enhanced mechanical and thermal performance, energy, sensors, biomedical, water treatment, and catalysis) was critically reviewed, pointing out the latest advances and potential challenges associated with the application of such materials, with a major focus on the effect that the physicochemical features imparted by functionalization routes exert on the achievement of ultimate properties capable of satisfying or even improving the current demand in each field. Finally, current limitations in terms of basic scientific knowledge and nanotechnology were highlighted, along with the potential future directions towards the full exploitation of such fascinating nanomaterials.