Aspartic Acid Stabilized Iron Oxide Nanoparticles for Biomedical Applications

Critical Evaluation of Combined Cu and Fe3O4 Nanodots with Gum Arabic Nano-Hybrids Using in-vitro Model: Flow Cytometry and Cell Viability Studies

Background

Previous studies on synthesis and cytotoxicity effect of copper (Cu) and magnetite (Fe3O4) nanodots against kidney and lung cancer cells Lines.

Purpose

Investigation of the effects of Cu and Fe3O4 nanodots on the reduction in viability of lung cancer (A549) and human embryonic kidney (HEK239T) cells lines.

Methods

Cu and Fe3O4 nanodots/Gum Arabic (GA) hybrids were chemically synthesized, characterized, and assessed by MTT and flow cytometry for their cytotoxicity against A549 and HEK239T cells lines.

Results

Novel hybrids of Cu and Fe3O4 nanodots were effectively synthesized by chemical deposition method in combination with GA stabilizing agent. The stabilized Cu and Fe3O4 nanodots by GA have median particle size of 4.7 nm and 7 nm respectively. Furthermore, the biological activities of Cu nanodots/ GA hybrids showed a strong reduction in viability for both A549 and HEK239T cells at 50 and 100 ng/µL, owing to their small size and high surface-area-to-volume ratio compared to Fe3O4 nanoparticles. Pre-apoptosis effect of the Cu nanodots/ GA hybrid on the treated A549 cells were 40% for 0.1 ng/µL, 91.4% for 1 ng/µL, 88% for 50 ng/ µL, and 87.7% for 100 ng/µL. However, in the treated human embryonic kidney (HEK293T) cells, the pre-apoptosis was found under different concentrations conditions of 89.9% for 0.1 ng/µL, 94.2% for 1 ng/µL, 76.2% for 50 ng/µL and 70.5% for 100 ng/µL. After treatment of both A549 and HEK293T cells with 100 ng/µL of Cu nanodots/GA hybrid, many cell deaths and reformed nanoparticles crystals were observed.

Conclusion

Cu nanodots/GA hybrid strongly reduce the viability of both A549 and HEK239T cells at 50 and 100 ng/µL. However, Fe3O4 nanodots/GA hybrid did not show any significant effect.

Improving the Theranostic Potential of Magnetic Nanoparticles by Coating with Natural Rubber Latex for Ultrasound, Photoacoustic Imaging, and Magnetic Hyperthermia: An In Vitro Study

BACKGROUND/OBJECTIVES

Magnetic nanoparticles (MNPs) have gained attention in theranostics for their ability to combine diagnostic imaging and therapeutic capabilities in a single platform, enhancing targeted treatment and monitoring. Surface coatings are essential for stabilizing MNPs, improving biocompatibility, and preventing oxidation that could compromise their functionality. Natural rubber latex (NRL) offers a promising coating alternative due to its biocompatibility and stability-enhancing properties. While NRL-coated MNPs have shown potential in applications such as magnetic resonance imaging, their effectiveness in theranostics, particularly magnetic hyperthermia (MH) and photoacoustic imaging (PAI), remains underexplored.

METHODS

In this study, iron oxide nanoparticles were synthesized via coprecipitation, using NRL as the coating agent. The samples were labeled by NRL amount used during synthesis: NRL-100 for 100 μL and NRL-400 for 400 μL.

RESULTS

Characterization results showed that NRL-100 and NRL-400 samples exhibited improved stability with zeta potentials of -27 mV and -30 mV, respectively and higher saturation magnetization values of 79 emu/g and 88 emu/g of Fe3O4. Building on these findings, we evaluated the performance of these nanoparticles in biomedical applications, including magnetomotive ultrasound (MMUS), PAI, and MH. NRL-100 and NRL-400 samples showed greater displacements and higher contrast in MMUS than uncoated samples (5, 8, and 9 µm) at 0.5 wt%. In addition, NRL-coated samples demonstrated an improved signal-to-noise ratio (SNR) in PAI. SNR values were 24.72 (0.51), 31.44 (0.44), and 33.81 (0.46) dB for the phantoms containing uncoated MNPs, NRL-100, and NRL-400, respectively. Calorimetric measurements for MH confirmed the potential of NRL-coated MNPs as efficient heat-generating agents, showing values of 43 and 40 W/g for NRL-100 and NRL-400, respectively.

CONCLUSIONS

Overall, NRL-coated MNPs showed great promise as contrast agents in MMUS and PAI imaging, as well as in MH applications.

Efficiency enhancement of electrocoagulation, ion-exchange resin and reverse osmosis (RO) membrane filtration by prior organic precipitation for treatment of anaerobically-treated palm oil mill effluent

Anaerobically-treated palm oil mill effluent (POME) still has unacceptable properties for water recycling and reuse, with an unpleasant appearance due to the brownish color caused by tannins and phenolic compounds. This study proposes an approach for treating anaerobically-treated POME for water recycling by combining organic precipitation, electrocoagulation (EC), and ion-exchange resin, followed by reverse osmosis (RO) membrane filtration in series. The results indicated that the organic precipitation enhanced the efficiency of EC treatment in reducing the concentrations of tannins, color, and chemical oxygen demand (COD) of the anaerobically-treated POME effluent, with reductions of 95.73%, 96.31%, and 93.96% for tannin, color, and COD, respectively. Moreover, organic precipitation affected the effectiveness of Ca2+ and Mg2+ ion removal using ion exchange resin and RO membrane filtration. Without prior organic precipitation, the ion-exchange resin process required a longer contact time, and the RO membrane filtration treatment was hardly effective in removing total dissolved solids (TDS). The combined process gave a water quality that meets the criteria set by the Thailand Ministry of Industry for industrial boiler use (COD 88 mg/L, TDS <0.001 mg/L, water hardness <5 mg-CaCO3/L, and pH 6.9).

Breaking boundaries in microbiology: customizable nanoparticles transforming microbial detection

The detection and identification of microorganisms are crucial in microbiology laboratories. Traditionally, detecting and identifying microbes require extended periods of incubation, significant manual effort, skilled personnel, and advanced laboratory facilities. Recent progress in nanotechnology has provided novel opportunities for detecting and identifying bacteria, viruses, and microbial metabolites using customized nanoparticles. These improvements are thought to have the ability to surpass the constraints of existing procedures and make a substantial contribution to the development of rapid microbiological diagnosis. This review article examines the customizability of nanoparticles for detecting bacteria, viruses, and microbial metabolites and discusses recent cutting-edge studies demonstrating the use of nanotechnology in biomedical research.

Sustainable magnetically recoverable Iridium-coated Fe3O4 nanoparticles for enhanced catalytic reduction of organic pollutants in water

The reduction of nitroarenes to aromatic amines is one of the potential pathways to remediate the hazardous impact of toxic nitroarenes on the aquatic environment. Aromatic amines obtained from the reduction of nitroaromatics are not only less toxic than nitroaromatics but also act as important intermediates in the synthesis of dyes, drugs, pigments, herbicides, and polymers. There is a huge demand for the development of cost-effective, and eco-friendly catalysts for the efficient reduction of nitroarenes. In the present study, Fe₃O₄@trp@Ir nanoparticles were explored as efficient catalysts for the reduction of nitroarenes. Fe₃O₄@trp@Ir magnetic nanoparticles were fabricated by surface coating of Fe₃O₄ with tryptophan and iridium by co-precipitation method. As-prepared Fe₃O₄@trp@Ir nanoparticles are environmentally benign efficient catalysts for reducing organic pollutants such as 4-nitrophenol (4-NP), 4-nitroaniline (4-NA), and 1-bromo-4-nitrobenzene (1-B-4-NB). The key parameters that affect the catalytic activity like temperature, catalyst loading, and the concentration of reducing agent NaBH₄ were optimized. The obtained results proved that Fe₃O₄@trp@Ir is an efficient catalyst for reducing nitroaromatics at ambient temperature with a minimal catalyst loading of 0.0025%. The complete conversion of 4-nitrophenol to 4-aminophenol took only 20 s with a minimal catalyst loading of 0.0025% and a rate constant of 0.0522 s^-1. The high catalytic activity factor (1.040 s^-1 mg^-1) and high turnover frequency (9 min^-1) obtained for Fe₃O₄@trp@Ir nanocatalyst highlight the possible synergistic effect of the two metals (Fe and Ir). The visible-light photocatalytic degradation of 4-NP was also investigated in the presence of Fe₃O₄@trp@Ir. The photocatalytic degradation of 4-NP by Fe₃O₄@trp@Ir is completed in 20 min with 95.15% efficiency, and the rate of photodegradation of 4-NP (0.1507 min^-1) is about twice the degradation rate of 4-NP in the dark (0.0755 min^-1). The catalyst was recycled and reused for five cycles without significant reduction in the conversion efficiency of the catalyst.

Application of Iron Nanoparticle-Based Materials in the Food Industry

Due to their different properties compared to other materials, nanoparticles of iron and iron oxides are increasingly used in the food industry. Food technologists have especially paid attention to their ease of separation by magnetic fields and biocompatibility. Unfortunately, the consumption of increasing amounts of nanoparticles has raised concerns about their biotoxicity. Hence, knowledge about the applicability of iron nanoparticle-based materials in the food industry is needed not only among scientists, but also among all individuals who are involved in food production. The first part of this article describes typical methods of obtaining iron nanoparticles using chemical synthesis and so-called green chemistry. The second part of this article describes the use of iron nanoparticles and iron nanoparticle-based materials for active packaging, including the ability to eliminate oxygen and antimicrobial activity. Then, the possibilities of using the magnetic properties of iron nano-oxides for enzyme immobilization, food analysis, protein purification and mycotoxin and histamine removal from food are described. Other described applications of materials based on iron nanoparticles are the production of artificial enzymes, process control, food fortification and preserving food in a supercooled state. The third part of the article analyzes the biocompatibility of iron nanoparticles, their impact on the human body and the safety of their use.

Superparamagnetic Iron Oxide Nanoparticles (SPION): From Fundamentals to State-of-the-Art Innovative Applications for Cancer Therapy

Despite significant advances in cancer therapy over the years, its complex pathological process still represents a major health challenge when seeking effective treatment and improved healthcare. With the advent of nanotechnologies, nanomedicine-based cancer therapy has been widely explored as a promising technology able to handle the requirements of the clinical sector. Superparamagnetic iron oxide nanoparticles (SPION) have been at the forefront of nanotechnology development since the mid-1990s, thanks to their former role as contrast agents for magnetic resonance imaging. Though their use as MRI probes has been discontinued due to an unfavorable cost/benefit ratio, several innovative applications as therapeutic tools have prompted a renewal of interest. The unique characteristics of SPION, i.e., their magnetic properties enabling specific response when submitted to high frequency (magnetic hyperthermia) or low frequency (magneto-mechanical therapy) alternating magnetic field, and their ability to generate reactive oxygen species (either intrinsically or when activated using various stimuli), make them particularly adapted for cancer therapy. This review provides a comprehensive description of the fundamental aspects of SPION formulation and highlights various recent approaches regarding in vivo applications in the field of cancer therapy.

Impact of Magnetite Nanoparticles Coated with Aspartic Acid on the Growth, Antioxidant Enzymes Activity and Chlorophyll Content of Maize

In recent decades, magnetite nanoparticles received greater attention in nanobiotechnology due to wide applications. This study presents the influence of the oxidative stress caused by magnetite nanoparticles coated with aspartic acid (A-MNP) of 9.17 nm mean diameter size, on maize (Zea mays) seedlings, in terms of growth, enzymatic activity and chlorophyll content as evaluated in exposed plant tissues. Diluted suspensions of colloidal magnetite nanoparticles stabilized in water were added to the culture medium of maize seeds, such as to equate nanoparticle concentrations varying from 0.55 mg/L to 11 mg/L. The obtained results showed that the growth of maize was stimulated by increasing the level of A-MNPs. Plant samples treated with different concentrations of A-MNP proved increased activities of catalase and peroxidase, and chlorophyll content, as well. The exposure of plants to magnetite nanoparticles may induce oxidative stress, which activates the plant defense/antioxidant mechanisms.