Conductive Inks Based on Melamine Intercalated Graphene Nanosheets for Inkjet Printed Flexible Electronics

Microscopic Techniques for Nanomaterials Characterization: A Concise Review

Nanomaterials have been gaining interest due to their remarkable properties at the nanoscale. The surface area of particles becomes high at the nanoscale because of this virtue, they have been used in a bundle of applications like electronics, biomedical, agriculture, wastewater treatment, semiconductor industry, cosmetics, drug delivery, paints, and so forth. The morphology (size and shape) of nanomaterials plays an important role because each application requires the appropriate morphology for better performance. Generally, there are a few microscopic techniques used to characterize nanomaterial morphology, AFM (atomic force microscopy), TEM (transmission electron microscopy), SEM (scanning electron microscopy), and others. In this review, the principles, operations, advantages, and limitations of these microscopic techniques for nanomaterial morphology characterization have been briefly discussed. The existing difficulties and path forward for the development of these techniques have also been highlighted.

Fully Inkjet-Printed Flexible Graphene-Prussian Blue Platform for Electrochemical Biosensing

Prussian Blue (PB) is commonly incorporated into screen-printed enzymatic devices since it enables the determination of the enzymatically produced hydrogen peroxide at low potentials. Inkjet printing is gaining popularity in the development of electrochemical sensors as a substitute for screen printing. This work presents a fully inkjet-printed graphene-Prussian Blue platform, which can be paired with oxidase enzymes to prepare a biosensor of choice. The graphene electrode was inkjet-printed on a flexible polyimide substrate and then thermally and photonically treated with intense pulsed light, followed by inkjet printing of a PB nanoparticle suspension. The optimization of post-printing treatment and electrode deposition conditions was performed to yield a platform with minimal sheet resistance and peak potential differences. A thorough study of PB deposition was conducted: the fully inkjet-printed system was compared against sensors with PB deposited chemically or by drop casting the PB suspension on different kinds of carbon electrodes (glassy carbon, commercial screen-printed, and in-house inkjet-printed electrodes). For hydrogen peroxide detection, the fully inkjet-printed platform exhibits excellent sensitivity, a wider linear range, better linearity, and greater stability towards higher concentrations of peroxide than the other tested electrodes. Finally, lactate oxidase was immobilized in a chitosan matrix, and the prepared biosensor exhibited analytical performance comparable to other lactate sensors found in the literature in a wide, physiologically relevant linear range for measuring lactate concentration in sweat. The development of mediator-modified electrodes with a single fabrication technology, as demonstrated here, paves the way for the scalable production of low-cost, wearable, and flexible biosensors.

Self-Assembled Lubricin (PRG-4)-Based Biomimetic Surface-Enhanced Raman Scattering Sensor for Direct Droplet Detection of Melamine in Undiluted Milk

Surface-enhanced Raman scattering (SERS) is a powerful optical sensing platform that amplifies the target signals by Raman scattering. Despite SERS enabling a meager detection limit, even at the single-molecule level, SERS also tends to equally enhance unwanted molecules due to the non-specific binding of noise molecules in clinical samples, which complicates its use in complex samples such as bodily fluids, environmental water, or food matrices. To address this, we developed a novel non-fouling biomimetic SERS sensor by self-assembling an anti-adhesive, anti-fouling, and size-selective Lubricin (LUB) coating on gold nanoparticle (AuNP) functionalized glass slide surfaces via a simple drop-casting method. Compared to a conventional AuNPs-SERS substrate, the biomimetic SERS meets the requirements of simple preparation and enables direct droplet detection without any sample pre-treatment. Atomic force microscopy was used to confirm the self-assembled Lubricin coating on the AuNP surface, acting as an anti-fouling and size-selective protection layer. A series of Raman spectra were collected using melamine as the target analyte, which was spiked into 150 mM NaCl solution or undiluted milk. It was demonstrated that the LUB coating effectively prevents the detrimental fouling generated by the proteins and fats in milk, ensuring the clear detection of melamine. Our sensor showed high selectivity and could detect melamine in milk at concentrations as low as 1 ppm. Given that the EU/US legal limit for melamine in food is 2.5 ppm, this sensor offers a promising, cost-effective solution for routine screening and has potential applications for detecting food adulteration in the food safety, environmental monitoring, aquaculture, and biomedical fields.

Flexible ammonium ion-selective electrode based on inkjet-printed graphene solid contact

Miniaturization and mass-production of potentiometric sensor systems is paving the way towards distributed environmental sensing, on-body measurements and industrial process monitoring. Inkjet printing is gaining popularity as a highly adaptable and scalable production technique. Presented here is a scalable and low-cost route for flexible solid-contact ammonium ion-selective electrode fabrication by inkjet printing. Utilization of inkjet-printed melamine-intercalated graphene nanosheets as the solid-contact material significantly improved charge transport, while evading the detrimental water-layer formation. External polarization was investigated as a means of improving the inter-electrode reproducibility: the standard deviations of E0 values were reduced after electrode polarization, the linear region of the response was extended to the range 10-1-10-6 M of NH4Cl and LODs reduced to 0.88 ± 0.17 μM. Finally, we have shown that the electrodes are adequate for measurements in a complex real sample: ammonium concentration was determined in landfill leachate water, with less than 4 % deviation from the reference method.

Sustainable, cytocompatible and flexible electronics on potato starch-based films

Environmental concerns and climate protection are gaining increasing emphasis nowadays. A growing number of industries and scientific fields are involved in this trend. Sustainable electronics is an emerging research strand. Environmentally friendly and biodegradable or biobased raw materials can be used for the development of green flexible electronic devices, which may serve to reduce the pollution generated by plastics and electronics waste. In this work, we present cytocompatible, electrically conductive structures of nanocarbon water-soluble composites based on starch films. To accomplish this goal, potato starch-based films with glycerol as a plasticiser were developed along with a water-soluble vehicle for nanocarbon-based electroconductive pastes specifically dedicated to screen printing technology. Films were characterized by optical microscopy, scanning electron microscopy (SEM) mechanical properties and surface free energy.

Graphene for Electronics

Graphene is an allotrope of carbon consisting of a single layer of atoms arranged in a two-dimensional (2D) honeycomb lattice [...].

Amphiphilic Silver Nanoparticles for Inkjet-Printable Conductive Inks

The large-scale manufacturing of flexible electronics is nowadays based on inkjet printing technology using specially formulated conductive inks, but achieving adequate wetting of different surfaces remains a challenge. In this work, the development of a silver nanoparticle-based functional ink for printing on flexible paper and plastic substrates is demonstrated. Amphiphilic silver nanoparticles with narrow particle size distribution and good dispersibility were prepared via a two-step wet chemical synthesis procedure. First, silver nanoparticles capped with poly(acrylic acid) were prepared, followed by an amidation reaction with 3-morpholynopropylamine (MPA) to increase their lipophilicity. Density functional theory (DFT) calculations were performed to study the interactions between the particles and the dispersion medium in detail. The amphiphilic nanoparticles were dispersed in solvents of different polarity and their physicochemical and rheological properties were determined. A stable ink containing 10 wt% amphiphilic silver nanoparticles was formulated and inkjet-printed on different surfaces, followed by intense pulsed light (IPL) sintering. Low sheet resistances of 3.85 Ω sq^-1, 0.57 Ω sq^-1 and 19.7 Ω sq^-1 were obtained for the paper, coated poly(ethylene terephthalate) (PET) and uncoated polyimide (PI) flexible substrates, respectively. Application of the nanoparticle ink for printed electronics was demonstrated via a simple flexible LED circuit.