Nickel Based Electrospun Materials with Tuned Morphology and Composition

Magnetic Response of Nano/Microparticles into Elastomeric Electrospun Fibers

Combining magnetic nanoparticles (MNPs) with high-voltage processes to produce ultra-thin magnetic nanofibers (MNFs) fosters the development of next-generation technologies. In this study, polycarbonate urethane nanofibers incorporating magnetic particles were produced via the electrospinning technique. Two distinct types of magnetic payload were used: (a) iron oxide nanoparticles (IONPs) with an average size and polydispersity index of 7.2 nm and 3.3%, respectively; (b) nickel particles (NiPs) exhibiting a bimodal size distribution with average sizes of 129 nanometers and 600 nanometers, respectively, and corresponding polydispersity indexes of 27.8% and 3.9%. Due to varying particle sizes, significant differences were observed in their aggregation and distribution within the nanofibers. Further, the magnetic response of the IONP and/or NiP-loaded fiber mats was consistent with their morphology and polydispersity index. In the case of IONPs, the remanence ratio (M_r/M_s) and the coercive field (H_c) were found to be zero, which agrees with their superparamagnetic behavior when the average size is smaller than 20-30 nm. However, the NiPs show M_r/M_s = 22% with a coercive field of 0.2kOe as expected for particles in a single or pseudo-single domain state interacting with each other via dipolar interaction. We conclude that magnetic properties can be modulated by controlling the average size and polydispersity index of the magnetic particles embedded in fiber mats to design magneto-active systems suitable for different applications (i.e., wound healing and drug delivery).

Electrospinning-Based Carbon Nanofibers for Energy and Sensor Applications

Carbon nanofibers (CNFs) are the most basic structure of one-dimensional nanometer-scale sp2 carbon. The CNF’s structure provides fast current transfer and a large surface area and it is widely used as an energy storage material and as a sensor electrode material. Electrospinning is a well-known technology that enables the production of a large number of uniform nanofibers and it is the easiest way to mass-produce CNFs of a specific diameter. In this review article, we introduce an electrospinning method capable of manufacturing CNFs using a polymer precursor, thereafter, we present the technologies for manufacturing CNFs that have a porous and hollow structure by modifying existing electrospinning technology. This paper also discusses research on the applications of CNFs with various structures that have recently been developed for sensor electrode materials and energy storage materials.

Nω-nitro-L-arginine, a nitric oxide synthase inhibitor, attenuates nickel-induced neurotoxicity

The various mediums of exposure to nickel (Ni) compounds have raised enormous public health concerns, as it has been illustrated to exert toxic effects in biological organs, including the brain. We have previously implicated the involvement of elevated nitric oxide (NO) in Ni-induced oxidative stress in the brain. Hence, the present study investigated the ameliorative potential of N^ω-nitro-L-arginine (L-NA), a NO synthase inhibitor, following Ni-induced neurotoxicity. Adult male rats were divided into four groups; control (normal saline), 10 mg/kg Ni chloride (NiCl₂) only, 1 mg/kg L-NA, or 2 mg/kg L-NA co-administered with NiCl₂. The administration was via daily intraperitoneal injections for three weeks. Neurobehavioural assessments performed thereafter ascertained short-term spatial memory and anxiety. Furthermore, histological evaluations of the cortex, hippocampus, and striatum were carried out using routine hematoxylin and eosin technique, while the phosphotungstic acid hematoxylin method was used to express the degree of astrogliosis. Biochemical analysis of NO levels was examined along with other oxidative stress markers (superoxide dismutase, catalase, glutathione, glutathione S transferase, glutathione peroxidase, myeloperoxidase, and lipid peroxidation). The results illustrated altered behavioral responses, a higher population of degenerating neurons, and astrocytes in the NiCl₂ group. There was also an elevation in the NO level and a corresponding reduction in antioxidant activities. However, these debilitating changes were ameliorated in the L-NA treated groups. These results demonstrate an association between alterations in NO synthesis pathway and Ni neurotoxicity, which may render neuronal cells susceptible to damage by oxidative stress. This may yet be another mechanism and useful therapeutic marker in deciphering Ni-induced neurotoxicity.

Single-Step Electrospun Ir/IrO2 Nanofibrous Structures Decorated with Au Nanoparticles for Highly Catalytic Oxygen Evolution Reaction

Nanocomposites of gold (Au) and iridium (Ir) oxide with various compositions (denoted as Au _xIr_{1- x}O _y, x = 0.05, 0.10, or 0.33, Au precursor molar ratio to Ir precursor) were synthesized via electrospinning and subsequent calcination method with two different solvent composition ratios of ethanol to N, N-dimethylformamide (DMF) in the electrospinning solution (ethanol/DMF = 70:30 or 50:50% v/v). Simple single-step electrospinning successfully fabricated a hierarchical nanostructure having Au nanoparticles formed on fibrous main frames of Ir/IrO₂. Different solvent composition in the electrospinning solution induced the formation of main frames with distinct nanostructures; nanoribbons (Au _xIr_{1- x}O _y-70) with ethanol/DMF = 70:30; and nanofibers (Au _xIr_{1- x}O _y-50) with ethanol/DMF = 50:50. The pure Ir or Au counterparts (IrO _y and Au) were also prepared by the same synthetic procedure as Au _xIr_{1- x}O _y. Oxygen evolution reaction (OER) activities of as-synthesized Au _xIr_{1- x}O _y were investigated in 0.5 M H₂SO₄ and compared to those of IrO _y, Au, and commercial iridium (Ir/C, 20% Ir loading on Vulcan carbon). Among them, Au_0.10Ir_0.90O _y-50 exhibited the best OER activity, even better than previously reported catalysts containing both Ir and Au. The high OER activity of Au_0.10Ir_0.90O _y-50 was mainly attributed to the fiber frame structure and the optimal interfacial areas between Au and Ir/IrO₂, which are electrophilic OER active sites. The stability of Au_0.10Ir_0.90O _y-50 was also evaluated to be much higher than that of Ir/C during OER. The current study suggests that the presence of Au on the Ir/IrO₂ surface improves the OER activity of Ir/IrO₂.

Ni(ii)-catalyzed mono-selective ortho-arylation of unactivated aryl C–H bonds utilizing amino acids as a directing group

The nickel(ii)-catalyzed ortho-arylation of unactivated C–H bonds utilizing amino acids as directing groups with aryl iodides or bromides as coupling electrophiles is described.

Preparation of Ni@Pt core@shell conformal nanofibre oxygen reduction electrocatalysts via microwave-assisted galvanic displacement

Ni@Pt core@shell nanofibres with controlled platinum shell thickness and Pt/Ni ratio are synthesised by an extremely fast and reproducible route, allowing their direct use as electrocatalysts.

Fabrication of Functional Polyurethane/Rare Earth Nanocomposite Membranes by Electrospinning and Its VOCs Absorption Capacity from Air

Volatile organic compounds (VOCs) are a source of air pollution and are harmful to both human health and the environment. In this study, we fabricated polyurethane/rare earth (PU/RE) composite nanofibrous membranes via electrospinning with the aim of removing VOCs from air. The morphological structure of PU/RE nanofibrous mats was investigated using field emission scanning electron microscopy (FE-SEM), fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) experimental analyses. A certain amount of RE (up to 50 wt. % compared to PU pellets) nanoparticles (NPs) could be loaded on/into PU fibers. The tensile strength of PU/RE nanofibrous membranes decreased slightly with the increasing RE powder content. The PU nanofiber containing 50 wt. % RE powder had the smallest fiber diameter of 356 nm; it also showed the highest VOC absorption capacity compared with other composite membranes, having an absorption capacity about three times greater than pure PU nanofibers. In addition, all of the PU/RE nanofibrous membranes readily absorbed styrene the most, followed by xylene, toluene, benzene and chloroform. Therefore, the PU/RE nanofibrous membrane can play an important role in removing VOCs from the air, and its development prospects are impressive because they are emerging materials.

Influence of Solution Properties and Process Parameters on the Formation and Morphology of YSZ and NiO Ceramic Nanofibers by Electrospinning

The fabrication process of ceramic yttria-stabilized zirconia (YSZ) and nickel oxide nanofibers by electrospinning is reported. The preparation of hollow YSZ nanofibers and aligned nanofiber arrays is also demonstrated. The influence of the process parameters of the electrospinning process, the physicochemical properties of the spinning solutions, and the thermal treatment procedure on spinnability and final microstructure of the ceramic fibers was determined. The fiber diameter can be varied from hundreds of nanometers to more than a micrometer by controlling the solution properties of the electrospinning process, while the grain size and surface roughness of the resulting fibers are mainly controlled via the final thermal annealing process. Although most observed phenomena are in qualitative agreement with previous studies on the electrospinning of polymeric nanofibers, one of the main differences is the high ionic strength of ceramic precursor solutions, which may hamper the spinnability. A strategy to control the effective ionic strength of precursor solutions is also presented.