Microstructured and Degradable Bacterial Cellulose⁻Gelatin Composite Membranes: Mineralization Aspects and Biomedical Relevance

Nisin-loaded gelatin microparticles for the enhanced bioactivity of bacterial nanocellulose

Bacterial nanocellulose (BnC) is of immense importance in medicine, although its lack of bioactivity present intriguing issue. We propose a method to modify BnC with gelatin and nisin biomolecules, and explore their synergistic effect on the antimicrobial activity. Gelatin microparticles (without/with nisin loading) with a size ~0.5 μm and ~ 1.3 μm were prepared by spray drying and stabilised by dehydrothermal treatment. Modified BnC-based membranes supported the formation of biologically relevant minerals and were non-cytotoxic to human gingival fibroblast cells (HGF). The presence of gelatin microparticles improved the viability of HGF by approximately 20 %, due to the effect of gelatin alone, independent of the addition of nisin. BnC coated with a nisin/gelatin solution reduces the viability of HGF by about 20 %, but this negative effect is not observed by nisin coated gelatin microparticles. The cell viability of BnC membranes was above 90 % in both porcine and human urothelial cells. The antimicrobial activity study confirmed an inhibitory effect of membranes modified with nisin-coated microparticles or a gelatin/nisin solution against Staphylococcus aureus at a non-cytotoxic nisin dose (150 μg/mL). The study demonstrates the structural effects of gelatin and gelatin/nisin mixtures on the bioactivity of BnC and provides a rationale for the modification procedure.

Development of a bacterial cellulose-gelatin composite as a suitable scaffold for cardiac tissue engineering

PURPOSE

Cardiac tissue engineering is suggested as a promising approach to overcome problems associated with impaired myocardium. This is the first study to investigate the use of BC and gelatin for cardiomyocyte adhesion and growth.

METHODS

Bacterial cellulose (BC) membranes were produced by Komagataeibacter xylinus and coated or mixed with gelatin to make gelatin-coated BC (BCG) or gelatin-mixed BC (mBCG) scaffolds, respectively. BC based-scaffolds were characterized via SEM, FTIR, XRD, and AFM. Neonatal rat-ventricular cardiomyocytes (nr-vCMCs) were cultured on the scaffolds to check the capability of the composites for cardiomyocyte attachment, growth and expansion.

RESULTS

The average nanofibrils diameter in all scaffolds was suitable (~ 30-65 nm) for nr-vCMCs culture. Pore diameter (≥ 10 µm), surface roughness (~ 182 nm), elastic modulus (0.075 ± 0.015 MPa) in mBCG were in accordance with cardiomyocyte requirements, so that mBCG could better support attachment of nr-vCMCs with high concentration of gelatin, and appropriate surface roughness. Also, it could better support growth and expansion of nr-vCMCs due to submicron scale of nanofibrils and proper elasticity (~ 0.075 MPa). The viability of nr-vCMCs on BC and BCG scaffolds was very low even at day 2 of culture (~ ≤ 40%), but, mBCG could promote a metabolic active state of nr-vCMCs until day 7 (~ ≥ 50%).

CONCLUSION

According to our results, mBCG scaffold was the most suitable composite for cardiomyocyte culture, regarding its physicochemical and cell characteristics. It is suggested that improvement in mBCG stability and cell attachment features may provide a convenient scaffold for cardiac tissue engineering.

Protein Immobilization on Bacterial Cellulose for Biomedical Application

New carriers for protein immobilization are objects of interest in various fields of biomedicine. Immobilization is a technique used to stabilize and provide physical support for biological micro- and macromolecules and whole cells. Special efforts have been made to develop new materials for protein immobilization that are non-toxic to both the body and the environment, inexpensive, readily available, and easy to modify. Currently, biodegradable and non-toxic polymers, including cellulose, are widely used for protein immobilization. Bacterial cellulose (BC) is a natural polymer with excellent biocompatibility, purity, high porosity, high water uptake capacity, non-immunogenicity, and ease of production and modification. BC is composed of glucose units and does not contain lignin or hemicellulose, which is an advantage allowing the avoidance of the chemical purification step before use. Recently, BC-protein composites have been developed as wound dressings, tissue engineering scaffolds, three-dimensional (3D) cell culture systems, drug delivery systems, and enzyme immobilization matrices. Proteins or peptides are often added to polymeric scaffolds to improve their biocompatibility and biological, physical-chemical, and mechanical properties. To broaden BC applications, various ex situ and in situ modifications of native BC are used to improve its properties for a specific application. In vivo studies showed that several BC-protein composites exhibited excellent biocompatibility, demonstrated prolonged treatment time, and increased the survival of animals. Today, there are several patents and commercial BC-based composites for wounds and vascular grafts. Therefore, further research on BC-protein composites has great prospects. This review focuses on the major advances in protein immobilization on BC for biomedical applications.

The orchestration of sustained drug delivery by bacterial cellulose/gelatin nanocomposites reinforced with carboxylic carbon nanotubes

Recently, modifying bacterial cellulose (BC) by compositing it with other nano-biomaterials has become inevitable to achieve its desired properties in drug delivery. To address this, our study endeavors to utilize an in-situ fabrication method for the creation of a multifunctional BC/gelatin (BC/Gel) platform reinforced with carboxylic multi-walled carbon nanotubes (cMWCNTs) as a sustainable delivery model of biomolecules. Incipiently, cMWCNTs were loaded with human serum albumin (HSA) as a drug model, with an optimized nanoparticle-to-protein ratio of 1:5 and loading efficiency of 90.0 ± 1.0 % before incorporation into BC/Gel hydrogels. By comparison, nanocomposition improved the surface area and overall porosity of BC/Gel up to 58.0 ± 1.3 m2/g and 85.5 ± 1.1 %, respectively. Likewise, significant wettability of 44.0 ± 0.1° and dramatic biodegradation rate of 36.9 ± 1.2 % were other exceptionally gained attributes. Meanwhile, with a Zero-order kinetic mechanism, CNT-HSA integration facilitated the controlled release of 56.0 ± 0.9 % HSA over 7 days. Drug-loaded nanocomposites showcased >70 % viability during in vitro cellular trials using Human Foreskin Fibroblasts (HFF). Overall, BC/Gel/CNT-HSA nanocomposite exhibited favorable cell behavior, devoid of cytotoxic manifestations. Consequently, this BC-based nanocomposite scaffold implicates the premiere capability in the sustained delivery of an extended range of protein biomolecules, offering a promising therapeutic avenue for bolstering tissue regeneration.

Applications of Bacterial Cellulose-Based Composite Materials in Hard Tissue Regenerative Medicine

BACKGROUND

Cartilage, bone, and teeth, as the three primary hard tissues in the human body, have a significant application value in maintaining physical and mental health. Since the development of bacterial cellulose-based composite materials with excellent biomechanical strength and good biocompatibility, bacterial cellulose-based composites have been widely studied in hard tissue regenerative medicine. This paper provides an overview of the advantages of bacterial cellulose-based for hard tissue regeneration and reviews the recent progress in the preparation and research of bacterial cellulose-based composites in maxillofacial cartilage, dentistry, and bone.

METHOD

A systematic review was performed by searching the PubMed and Web of Science databases using selected keywords and Medical Subject Headings search terms.

RESULTS

Ideal hard tissue regenerative medicine materials should be biocompatible, biodegradable, non-toxic, easy to use, and not burdensome to the human body; In addition, they should have good plasticity and processability and can be prepared into materials of different shapes; In addition, it should have good biological activity, promoting cell proliferation and regeneration. Bacterial cellulose materials have corresponding advantages and disadvantages due to their inherent properties. However, after being combined with other materials (natural/ synthetic materials) to form composite materials, they basically meet the requirements of hard tissue regenerative medicine materials. We believe that it is worth being widely promoted in clinical applications in the future.

CONCLUSION

Bacterial cellulose-based composites hold great promise for clinical applications in hard tissue engineering. However, there are still several challenges that need to be addressed. Further research is needed to incorporate multiple disciplines and advance biological tissue engineering techniques. By enhancing the adhesion of materials to osteoblasts, providing cell stress stimulation through materials, and introducing controlled release systems into matrix materials, the practical application of bacterial cellulose-based composites in clinical settings will become more feasible in the near future.

From Nature to Lab: Sustainable Bacterial Cellulose Production and Modification with Synthetic Biology

Bacterial cellulose (BC) is a macromolecule with versatile applications in medicine, pharmacy, biotechnology, cosmetology, food and food packaging, ecology, and electronics. Although many bacteria synthesize BC, the most efficient BC producers are certain species of the genera Komagataeibacter and Novacetimonas. These are also food-grade bacteria, simplifying their utilization at industrial facilities. The basic principles of BC synthesis are known from studies of Komagataeibacter xylinus, which became a model species for studying BC at genetic and molecular levels. Cellulose can also be of plant origin, but BC surpasses its purity. Moreover, the laboratory production of BC enables in situ modification into functionalized material with incorporated molecules during its synthesis. The possibility of growing Komagataeibacter and Novacetimonas species on various organic substrates and agricultural and food waste compounds also follows the green and sustainable economy principles. Further intervention into BC synthesis was enabled by genetic engineering tools, subsequently directing it into the field of synthetic biology. This review paper presents the development of the fascinating field of BC synthesis at the molecular level, seeking sustainable ways for its production and its applications towards genetic modifications of bacterial strains for producing novel types of living biomaterials using the flexible metabolic machinery of bacteria.

Production efficiency and properties of bacterial cellulose membranes in a novel grape pomace hydrolysate by Komagataeibacter melomenusus AV436T and Komagataeibacter xylinus LMG 1518

The microbial production of cellulose using different bacterial species has been extensively examined for various industrial applications. However, the cost-effectiveness of all these biotechnological processes is strongly related to the culture medium for bacterial cellulose (BC) production. Herein, we examined a simple and modified procedure for preparing grape pomace (GP) hydrolysate, without enzymatic treatment, as a sole growth medium for BC production by acetic acid bacteria (AAB). The central composite design (CCD) was used to optimise the GP hydrolysate preparation toward the highest reducing sugar contents (10.4 g/L) and minimal phenolic contents (4.8 g/L). The experimental screening of 4 differently prepared hydrolysates and 20 AAB strains identified the recently described species Komagataeibacter melomenusus AV436^T as the most efficient BC producer (up to 1.24 g/L dry BC membrane), followed by Komagataeibacter xylinus LMG 1518 (up to 0.98 g/L dry BC membrane). The membranes were synthesized in only 4 days of bacteria culturing, 1 st day with shaking, followed by 3 days of static incubation. The produced BC membranes in GP-hydrolysates showed, in comparison to the membranes made in a complex RAE medium 34 % reduction of crystallinity index with the presence of diverse cellulose allomorphs, presence of GP-related components within the BC network responsible for the increase of hydrophobicity, the reduction of thermal stability and 48.75 %, 13.6 % and 43 % lower tensile strength, tensile modulus, and elongation, respectively. Here presented study is the first report on utilising a GP-hydrolysate without enzymatic treatment as a sole culture medium for efficient BC production by AAB, with recently described species Komagataeibacter melomenusus AV436^T as the most efficient producer in this type of food-waste material. The scale-up protocol of the scheme presented here will be needed for the cost-optimisation of BC production at the industrial levels.

Dopamine-Assisted Modification of Polypropylene Film to Attain Hydrophilic Mineral-Rich Surfaces

The presented study focuses on the modification of polypropylene (PP) film with tetraethyl orthosilicate (TEOS) under heterogeneous conditions via polydopamine/polyethylene imine (PDA/PEI) chemistry using a facile dip-coating procedure to attain hydrophilic mineral-rich surfaces. Thus, the resulting PP-based films were further immersed in ion-rich simulated body fluid (SBF) to deposit Ca-based minerals onto the film's surfaces efficiently. In addition, the chemical reaction mechanism on PP film was proposed, and mineralisation potential inspected by determination of functional groups of deposits, zeta potential, hydrophilicity and surface morphology/topography using Fourier transform infrared (FTIR) spectroscopy, streaming potential, water contact angle (WCA), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The obtained results show the improved wettability of samples on account of PDA inclusion (WCA was reduced from 103° for pure PP film to 28° for PDA-modified film), as well as the presence of functional groups, due to the PDA/PEI/TEOS surface functionalisation, increased the ability of minerals to nucleate on the PP film's surface when it was exposed to an SBF medium. Moreover, the higher surface roughness due to the silica coatings influenced the enhanced anchoring and attachment of calcium phosphate (CaP), revealing the potential of such a facile approach to modify the chemically inert PP films, being of particular interest in different fields, including regenerative medicine.

Bacterial Cellulose Cultivations Containing Gelatin Form Tunable, Highly Ordered, Laminae Structures with Fourfold Enhanced Productivity

Manipulation of bacterial cellulose (BC) morphology is important to tune BC properties to meet specific application requirements. In this study, gelatin was added to cultivation media at 0.1-7.5 wt %. After cultivations, gelatin was removed from the BC matrix, and its effects on BC matrix characteristics and fermentation production efficiency were determined. Higher contents of gelatin in cultivation media (up to 5%) resulted in BC that, from scanning electron microscopy observations, had larger pore sizes and formation of a lamina morphology that was highly unidirectional. Crystallinity remained unchanged between 0.1 and 5 wt % gelatin concentrations (92-95%); however, it decreased to 86% at a gelatin concentration of 7.5 wt %. Mechanical properties showed a positive trend as both the specific modulus and specific strength values increased as the gelatin concentration increased to 5 wt %. A breakdown in the ordered structure of the BC matrix occurs at 7.5 wt % gelatin, with corresponding decreases in the specific modulus and specific strength of the BC. The productivity increased by almost 4-fold relative to the control, reaching 1.64 g·L^-1h^-1 at the 2.5 wt % gelatin content. Also, the water holding capacity increased by 3-fold relative to the control, reaching 306.6 g of water per g BC at the 5.0 wt % gelatin content. The changes observed in these BC metrics can be explained based on literature findings associated with the formation of gelatin aggregates in the cultivation media and an increase in gel stiffness seen at higher media gelatin concentrations. Overall, this work provides a roadmap for manipulating BC properties while creating highly organized lamina morphologies.

Stimuli-responsive composite hydrogels with three-dimensional stability prepared using oxidized cellulose nanofibers and chitosan

Stimuli-responsive hydrogels have garnered the attention of the hydrogel industry, as they are able to change their physical and chemical properties based on changing external stimuli such as pH, temperature, ionic strength, electromagnetic fields, and light. However, stimuli-responsive hydrogel applications are hindered due to their inevitable swelling and shrinkage. Bacterial cellulose (BC), a natural hydrogel with tightly packed cellulose nanofibers (CNFs) was oxidized into dialdehyde BC (DABC) and was composited with chitosan (CS), a readily available natural polymer, to develop a mechanically adaptive hydrogel composite under different pH conditions. Composites exhibit pH sensitivity by presenting higher mechanical properties under acidic conditions and lower mechanical properties under basic conditions owing to the protonation of amino groups of the chitosan chains. Osmotic pressure is built up under acidic conditions, increasing the mechanical strength of the composites. The good three-dimensional stability of composites enables them to consistently maintain their volume when exposed to acidic or basic conditions.

Bacterial cellulose and its potential for biomedical applications

Bacterial cellulose (BC) is an important polysaccharide synthesized by some bacterial species under specific culture conditions, which presents several remarkable features such as microporosity, high water holding capacity, good mechanical properties and good biocompatibility, making it a potential biomaterial for medical applications. Since its discovery, BC has been used for wound dressing, drug delivery, artificial blood vessels, bone tissue engineering, and so forth. Additionally, BC can be simply manipulated to form its derivatives or composites with enhanced physicochemical and functional properties. Several polymers, carbon-based nanomaterials, and metal nanoparticles (NPs) have been introduced into BC by ex situ and in situ methods to design hybrid materials with enhanced functional properties. This review provides comprehensive knowledge and highlights recent advances in BC production strategies, its structural features, various in situ and ex situ modification techniques, and its potential for biomedical applications.

Advanced Functional Materials Based on Nanocellulose for Pharmaceutical/Medical Applications

Nanocelluloses (NCs), with their remarkable characteristics, have proven to be one of the most promising "green" materials of our times and have received special attention from researchers in nanomaterials. A diversity of new functional materials with a wide range of biomedical applications has been designed based on the most desirable properties of NCs, such as biocompatibility, biodegradability, and their special physicochemical properties. In this context and under the pressure of rapid development of this field, it is imperative to synthesize the successes and the new requirements in a comprehensive review. The first part of this work provides a brief review of the characteristics of the NCs (cellulose nanocrystals-CNC, cellulose nanofibrils-CNF, and bacterial nanocellulose-BNC), as well as of the main functional materials based on NCs (hydrogels, nanogels, and nanocomposites). The second part presents an extensive review of research over the past five years on promising pharmaceutical and medical applications of nanocellulose-based materials, which have been discussed in three important areas: drug-delivery systems, materials for wound-healing applications, as well as tissue engineering. Finally, an in-depth assessment of the in vitro and in vivo cytotoxicity of NCs-based materials, as well as the challenges related to their biodegradability, is performed.

Preparing printable bacterial cellulose based gelatin gel to promote in vivo bone regeneration

The naturally tight entanglement of fibers in bacterial cellulose (BC) results in low printability when BC is used as a bioink for printing scaffolds. In this study, neat BC was treated by TEMPO-mediated oxidation (TO-BC) and maleic acid (MA-BC) to prepare homogeneous BC dispersions to fabricate scaffolds for bone regeneration. Results showed that the treatments released individual fibrils in the corresponding uniform dispersions without impairing inherent crystalline properties. Compared with TO-BC, MA-BC hybridized with gelatin could endow the gel with improved rheological properties and compression modulus for 3D printing. Both TO-BC and MA-BC dispersions showed good osteoblast viability. However, MA-BC possessed more pronounced ability to express osteogenic marker genes and formation of mineralized nodules in vitro. Compared with TO-BC-based gelatin scaffolds, MA-BC-based gelatin scaffolds showed a better ability to stimulate the regeneration of rat calvaria, demonstrating a higher bone mineral density of newly formed bone and trabecular thickness in vivo.

Ternary nano-biocomposite films using synergistic combination of bacterial cellulose with chitosan and gelatin for tissue engineering applications

Ternary nano-biocomposite films of bacterial cellulose-chitosan-gelatin (BC-C-G) were fabricated by immersing the BC pellicles into chitosan and gelatin mixture and subsequently freeze-drying. Scanning electron microscopy (SEM) images of the nano-biocomposite films revealed the presence of interconnected pores, with fibre diameter 20-150 nm. The composite films have a porosity of 95.3%, and showed good hydrophilicity with swelling ratio of 19 ± 1.8 and in vitro degradability. X-ray diffraction, attenuated total reflectance Fourier transform infrared spectroscopy, and thermogravimetric (TG) analysis results showed some interactions among the molecules of BC, gelatin, and chitosan within the film. The composite film offered good matrix for adhesion and proliferation of L929 fibroblasts cells as indicated by the cell attachment study, FE-SEM of cell-film constructs and cytocompatibility assay. Thus, the nano-biocomposite films of BC-C-G could be of paramount importance as tissue engineering scaffold. The "all-natural" ternary polymer composite films of BC-C-G have not been evaluated before for biomedical applications.

Bacterial Cellulose as a Versatile Platform for Research and Development of Biomedical Materials

The unique pool of features found in intracellular and extracellular bacterial biopolymers attracts a lot of research, with bacterial cellulose (BC) being one of the most versatile and common. BC is an exopolysaccharide consisting solely of cellulose, and the variation in the production process can vary its shape or even its composition when compounding is applied in situ. Together with ex situ modification pathways, including specialised polymers, particles or exclusively functional groups, BC provides a robust platform that yields complex multifunctional compounds that go far beyond ultra-high purity, intrinsic hydrophilicity, mechanical strength and biocompatibility to introduce bioactive, (pH, thermal, electro) responsive, conductive and ‘smart’ properties. This review summarises the research outcomes in BC-medical applications, focusing mainly on data from the past decade (i.e., 2010–2020), with special emphasis on BC nanocomposites as materials and devices applicable in medicine. The high purity and unique structural/mechanical features, in addition to its capacity to closely adhere to irregular skin surfaces, skin tolerance, and demonstrated efficacy in wound healing, all stand as valuable attributes advantageous in topical drug delivery. Numerous studies prove BC compatibility with various human cells, with modifications even improving cell affinity and viability. Even BC represents a physical barrier that can reduce the penetration of bacteria into the tissue, but in its native form does not exhibit antimicrobial properties, therefore carious modifications have been made or specific compounds added to confer antimicrobial or anti-inflammatory properties. Progress in the use of BC-compounds as wound dressings, vascular grafts, and scaffolds for the treatment of cartilage, bone and osteochondral defects, the role as a basement membrane in blood-brain barrier models and many more are discussed to particular extent, emphasising the need for BC compounding to meet specific requirements.

Efficiency of Differently Processed Membranes Based on Cellulose as Cationic Dye Adsorbents

In order to minimize the pollution caused by the reuse of textile dyes, technologies and materials have been developed that purify waste water in an efficient and cost-effective manner before it is discharged into a water body. In this context, the presented research investigates the potential of two types of fully cellulose-based membranes as adsorbents for cationic dyes used in the textile industry. The first type combines cellulose nanofibrils (CNFs) and carboxymethylated cellulose (CMC) using the solvent casting process and an esterification coupling reaction, while the second type uses commercial bacterial cellulose (BC) in a native and sodium periodate-treated form (BCox). The corresponding membranes were comprehensively evaluated by means of Fourier Transform Infrared (FTIR) Spectroscopy. Results confirm the esterification process within the CNF/CMC membranes, as well as BC oxidation after periodate treatment, as shown by bands at 1726.2 cm⁻¹ and 895 cm⁻¹, respectively. The Potentiometric Titration shows the highest total negative charge of 1.07 mmol/g for 4CNF/4CMC, which is assigned to the presence of COO⁻ within CMC polymers, and lowest (0.21 mmol/g) for BCox. The Contact Angle Goniometry data confirm the hydrophilicity of all membranes, and the angle increased from 0 ° (in pure BC) to 34.5 ° in CMC-rich and to 31.4 ° in BCox membranes due to the presence of CH₂COO⁻ and CHO groups, respectively. Confocal Fluorescent Microscopy (CFM) demonstrated the highest µ-roughness in 4CNF/4CMC, while Scanning Electron Microscopy (SEM) depicted diverse morphological features between the membranes, from ultrafine nanofiber networks (in BC and BCox) to larger fiber bundles connected within the polymer phase in CNF/CMC membranes. The adsorption experiment followed by UV–VIS spectroscopy, showed ~100% dye removal efficiency in both CNF/CMC-based membranes, while BC and BCox adsorbed only 24.3% and 23.6%, respectively, when anthraquinone dye was used. Azo dye was only adsorbed with an efficiency of 7–9% on CMC/CNF-based membranes, compared with 5.57% on BC and 7.33% on BCox membranes. The adsorption efficiency at equilibrium was highest for BC (1228 mg/g) and lowest for 7CNF/1CMC (419.24 mg/g) during anthraquinone dye adsorption. In the case of azo dye, the BCox was most effective, with 445.7 mg/g. Applicability of a pseudo second-order model was confirmed for both dyes and all membranes, except for BCox in combination with azo dye, showing the fastest adsorption rate in the case of the 7CNF/1CMC membrane.

Bacterial Cellulose: Production, Modification and Perspectives in Biomedical Applications

Bacterial cellulose (BC) is ultrafine, nanofibrillar material with an exclusive combination of properties such as high crystallinity (84%-89%) and polymerization degree, high surface area (high aspect ratio of fibers with diameter 20-100 nm), high flexibility and tensile strength (Young modulus of 15-18 GPa), high water-holding capacity (over 100 times of its own weight), etc. Due to high purity, i.e., absence of lignin and hemicellulose, BC is considered as a non-cytotoxic, non-genotoxic and highly biocompatible material, attracting interest in diverse areas with hallmarks in medicine. The presented review summarizes the microbial aspects of BC production (bacterial strains, carbon sources and media) and versatile in situ and ex situ methods applied in BC modification, especially towards bionic design for applications in regenerative medicine, from wound healing and artificial skin, blood vessels, coverings in nerve surgery, dura mater prosthesis, arterial stent coating, cartilage and bone repair implants, etc. The paper concludes with challenges and perspectives in light of further translation in highly valuable medical products.

"Tree to Bone": Lignin/Polycaprolactone Nanofibers for Hydroxyapatite Biomineralization

Bone contains an organic matrix composed of aligned collagen fibers embedded with nanosized inorganic hydroxyapatite (HAp). Many efforts are being made to mimic the natural mineralization process and create artificial bone scaffolds that show elaborate morphologies, excellent mechanical properties, and vital biological functions. This study reports a newly discovered function of lignin mediating the formation of human bone-like HAp. Lignin is the second most abundant organic material in nature, and it exhibits many attractive properties for medical applications, such as high durability, stability, antioxidant and antibacterial activities, and biocompatibility. Numerous phenolic and aliphatic hydroxyl moieties exist in the side chains of lignin, which donate adequate reactive sites for chelation with Ca²⁺ and the subsequent nucleation of HAp through coprecipitation of Ca²⁺ and PO₄^3-. The growth of HAp crystals was facilitated by simple incubation of the electrospun lignin/polycaprolactone (PCL) matrix in a simulated body fluid. Multiple analyses revealed that HAp crystals were structurally and mechanically similar to the native bone. Furthermore, the mineralized lignin/PCL nanofibrous films facilitated efficient adhesion and proliferation of osteoblasts by directing filopodial extension. Our results underpin the expectations for this lignin-based biomaterial in future biointerfaces and hard-tissue engineering.