Aggregation-Induced Emission (AIE)-Labeled Cellulose Nanocrystals for the Detection of Nitrophenolic Explosives in Aqueous Solutions

A flavonol-labelled cellulose fluorescent probe combined with composite fluorescent film imaging and smartphone technology for the detection of Fe3

Fe3+ is one of the most widely distributed and abundant elements on earth. Realizing efficient and real-time monitoring of Fe3+ is of great significance for the natural environment and the health of living organisms. In this paper, a flavonol-labelled cellulose-based fluorescent probe (ACHM) was synthesized by using dialdehyde cellulose (DAC) as the backbone and combining with flavonol derivatives (AHM - 1). The mechanism of recognizing Fe3+ was verified by characterizing the structure of ACHM by NMR, HRMS (High Resolution Mass Spectrometry), FTIR (Fourier Transform Infrared Spectroscopy), XRD (X-ray Diffraction), TG (Thermogravimetry) and SEM (Scanning Electron Microscopy). The H2O solution of the probe ACHM showed good fluorescence properties. It has quenching fluorescence properties for Fe3+, with a low limit of detection (LOD) of 0.10 μM and a fast response time of only 20 s. In addition, in order to expand the application range of the probe, ACHM was prepared as a fluorescent composite film with an average tensile strength of 32.9 MPa and an average elongation at break of 3.39 %. It shows its superiority in mechanical properties. The probe also demonstrated its practical application value for detecting Fe3+ in smartphone imaging applications.

Light and pH dual-responsive spiropyran-based cellulose nanocrystals

Reversibly light and pH dual-responsive spiropyran-based cellulose nanocrystals (SP-CNCs) is synthesized by the attachment of carboxyl-containing spiropyran (SP-COOH) onto cellulose nanocrystals (CNCs). The resulting structure and properties of SP-CNCs are examined by Fourier transform infrared spectroscopy (FT-IR), elemental analysis, transmission electron microscopy (TEM), atomic force microscopy (AFM), dynamic laser light scattering (DSL), ζ-potential measurements and ultraviolet-visible (UV-Vis) light absorption spectroscopy. SP-CNCs exhibit excellent photochromic and photoswitching properties. Spiropyran moieties on SP-CNCs can be switched between open-ring merocyanine (MC) and closed ring spiropyran (SP) forms under UV/Vis irradiation, leading to color changes. Moreover, SP-CNCs display improved photoresponsiveness, photoreversibility, fatigue resistance, and stability in DMSO than in H₂O. We further investigate the pH-responsive behavior of SP-CNCs in H₂O. SP-CNCs aqueous solution display different colors at different pH values, which can be directly observed by naked eye, indicating that SP-CNCs can function as a visual pH sensor. These results suggest that light and pH dual-responsive SP-CNCs possess great potential for applications in reversible data storage, sensing, optical switching and light-controlled nanomaterials.

Fluorescent cellulose nanocrystals/waterborne polyurethane nanocomposites for anti-counterfeiting applications

The development of eco-friendly anti-counterfeiting materials with high optical transparency and bright luminescence in the aggregate state is tremendously challenging. Herein, waterborne polyurethane/tetraphenylethylene-cellulose nanocrystal (WPU/TPE-CNC) nanocomposite aqueous solutions and films were prepared via direct blending aggregation-induced emission (AIE) active fluorescent CNCs (TPE-CNCs) with WPU and then applied in the anti-counterfeiting field. TPE-CNCs are compatible with WPU and dispersed homogeneously in the nanocomposite aqueous solutions and films. The thermal stability and mechanical properties of these films significantly improved with the increase in the content of TPE-CNCs. WPU/TPE-CNC nanocomposite films display high transparency (above 80%), excellent fluorescence properties, high mechanical strength, and good flexibility and then successfully applied to anti-counterfeit marking. Moreover, the dispersions of the aqueous WPU/TPE-CNC nanocomposite were nearly colorless and demonstrated promise as fluorescent anti-counterfeiting inks. This novel eco-friendly nanocomposite exhibited the potential for applications in anti-counterfeiting, fluorescent transparent paper and coating, fluorescent 3D printing, and optical/sensing devices.

Construction of Fluorescent Conjugated Polytriazole Containing Double-Decker Silsesquioxane: Click Polymerization and Thermal Stability

This study synthesized two azide-functionalized monomers through p-dichloro xylene and double-decker silsesquioxane (DDSQ) units with NaN₃ to form DB-N₃ and DDSQ-N₃ monomers, respectively. In addition, five different propargyl-functionalized monomers were also prepared from hydroquinone, bisphenol A, bis(4-hydroxyphenyl)methanone, 2,4-dihydroxybenzaldehyde (then reacted with hydrazine hydrate solution) and 1,2-bis(4-hydroxyphenyl)-1,2-diphenylethene with propargyl bromide to form P-B, P-BPA, P-CO, P-NP, and P-TPE monomers, respectively. As a result, various DDSQ-based main chain copolymers could be synthesized using Cu(I)-catalyzed click polymerization through DDSQ-N₃ with different propargyl-functionalized monomers, of which the chemical structure and molecular weight could be confirmed by using Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and gel permeation chromatography (GPC) analyses. Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscope (SEM), transmission electron microscopy (TEM), and photoluminescence (PL) spectroscopy analyses also could characterize the thermal stability, morphology, and optical behaviors of these DDSQ-based copolymers. All results indicate that the incorporation of an inorganic DDSQ cage could improve the thermal stability such as thermal decomposition temperature and char yield, because of the DDSQ dispersion homogeneously in the copolymer matrix, and this would then affect the optical properties of NP and TPE units in this work.

pH-Responsive fluorescent supramolecular nanoparticles based on tetraphenylethylene-labelled chitosan and a six-fold carboxylated tribenzotriquinacene

We synthesized a new tetraphenylethylene-modified chitosan bioconjugate, CS-TPE, that shows the aggregation-induced emission effect. It can self-assemble into fluorescent polymeric nanoparticles in an aqueous solution at pH 5.3 either alone or with the water-soluble bowl-shaped six-fold carboxylated tribenzotriquinacene derivative TBTQ-C₆ via host-guest binding. The spherical nanoparticles formed by CS-TPE amphiphiles or TBTQ-C₆/CS-TPE supra-amphiphiles disintegrated under alkaline stimulation at pH 10.4 and the dispersion of the aggregates after the collapse in the presence of TBTQ-C₆ was greatly improved. In addition, the fluorescence of CS-TPE was significantly enhanced by introducing TBTQ-C₆, and remained relatively stable with variations in pH for both CS-TPE and TBTQ-C₆/CS-TPE. Such pH-responsive supramolecular spherical nanoparticles with stable fluorescence emission based on CS-TPE or TBTQ-C₆/CS-TPE may find applications in various fields, including the development of visual oral drug delivery systems.

Assembly of AIEgen-Based Fluorescent Metal-Organic Framework Nanosheets and Seaweed Cellulose Nanofibrils for Humidity Sensing and UV-Shielding

Integrating synthetic low-dimensional nanomaterials such as metal-organic framework (MOF) nanosheets with a sustainable biopolymer is a promising strategy to endow composites with attractive structural and functional properties for expanded applications. Herein, aggregation-induced-emission luminogen (AIEgen)-based MOF bulk crystals are successfully exfoliated into ultrathin 2D nanosheets. Seaweed cellulose nanofibrils (CNFs) are assembled with low amounts (0.3 to 4.0 wt%) of the 2D nanosheets to generate luminescent composites. The 2D nanosheets are adsorbed onto the CNFs in dilute water suspensions owing to the flexibility of the MOF nanosheets and the high aspect ratio of the CNFs. Transparent films are prepared by solution casting from a water suspension of the CNF-MOF assembly. The fluorescence emission of the composite films is enhanced because of the favored affinity between MOF nanosheets and CNFs. Remarkably, these films demonstrate excellent UV-shielding capacity and high optical transmittance at the visible wavelength range. The composite films also show reversible changes in fluorescence emission intensity in response to ambient humidity. The tensile strength and modulus of the composite films are also enhanced owing to the increased adhesion between CNFs through the adsorbed MOF nanosheets. This work provides a novel pathway to fabricate luminescent CNFs-based composites with tunable optical properties for functional materials.

Fluorescent cellulose nanocrystals based on AIE luminogen for rapid detection of Fe3+ in aqueous solutions

Previously, we found that aggregation-induced emission (AIE) luminogen tetraphenylethylene (TPE) based fluorescent cellulose nanocrystals (TPE-CNCs) showed excellent AIE-active fluorescence properties and high selectivity and sensitivity for detecting nitrophenol explosives in aqueous solutions. Here, we further develop the application of TPE-CNCs for fluorescence detection of Fe³⁺ in aqueous solutions. The fluorescence of TPE-CNC aqueous suspensions is rapidly quenched (response time less than 10 s) due to the electron-transfer process between TPE and Fe³⁺ upon addition of Fe³⁺. TPE-CNCs have high sensitivity and selectivity toward Fe³⁺ over a broad pH range from 4 to 10. The limit of detection is determined to be 264 nM, which is below the World Health Organization (WHO) recommendations (5.36 μM) for Fe³⁺. Given the superior properties of TPE-CNCs, it has huge potential to be applied as a rapid and visual evaluation tool for drinking water quality. Collectively, we explore and develop fluorescent cellulose nanocrystals for multi-functional applications and TPE-CNCs can be used for practical applications in sensing, sewage treatment and bioimaging.

AIE-active fluorescent cellulose nanocrystals (TPE-CNCs) is developed as a high selectivity and sensitivity fluorescent probe for rapid detection of Fe³⁺ in aqueous solutions.

Colanic Acid: Biosynthetic Overproduction by Engineering Escherichia coli and Physical Property Characterization

Colanic acid has promising applications in food, cosmetic, and healthcare fields. In this study, a recombinant WQM003/pRAU was constructed by deleting genes lon and hns and overexpressing genes rcsA and galU in E. coli MG1655Δ(L-Q). After systematic optimization of fermentation conditions, colanic acid yield in WQM003/pRAU reached 19.79 g/L, the highest yield reported so far. The colanic acid produced by WQM003/pRAU was purified and its structure and physical properties were determined. This colanic acid shows a triple-helical structure and is stable up to 102 °C, and its melting temperature is 253.9 °C. This colanic acid shows a sphere-like chain conformation in aqueous solution. The viscosity of this colanic acid solution is related to concentration, shear rate, salt, temperature, and pH. At high concentrations, this colanic acid shows both viscous and elastic behaviors. These results suggest that the colanic acid produced by WQM003/pRAU has broad application prospects.

Design of an AIE-Active Flexible Self-Assembled Monolayer Probe for Trace Nitroaromatic Compound Explosive Detection

In this work, a series of molecules TPE-PA-n (n = 3-11) were designed with classic aggregation-induced emission (AIE) 1,1,2,2-tetraphenylethene (TPE) for self-assembled monolayers (SAMs), which are applied for the detection of trace nitroaromatic compound (NAC) explosives. Phosphoric acid that acts as an anchor is used to connect with TPE through alkyl chains of various lengths. It is found that the alkyl chains play a role in pulling TPE luminogens to aggregate for light emission, which can affect the fluorescence and sensing performance of the SAMs. Ulteriorly, a model is built to explore the influence of the alkyl chain length on the device performance, which is determined by the three effects of the alkyl chain: flexibility, the coupling effect, and the odd-even effect. By comparison, the functional molecules with the chain length of 8 were finally selected and further applied for NAC sensors. By means of fluorescence spectra, the SAM sensor was proved to have good stability, reversibility, selectivity, and sensitivity, and its detection limits for trinitrotoluene, dinitrotoluene, and nitrobenzene were 1.2, 6.0, and 35.7 ppm, respectively. This work provides new ideas for the design and preparation of flexible sensors for trace NAC detection with high performance, low cost, and easy operation.

Supramolecular assemblies of glycoclusters with aggregation-induced emission for sensitive phenol detection

Hypercrosslinked AIE-active glycocluster nano aggregates are facilely synthesized as fluorescent probes for the detection of phenols.