Nanostructured Perovskite Solar Cells

Challenges in the design and synthesis of self-assembling molecules as selective contacts in perovskite solar cells

Self-assembling molecules (SAMs), as selective contacts, play an important role in perovskite solar cells (PSCs), determining the performance and stability of these photovoltaic devices. These materials offer many advantages over other traditional materials used as hole-selective contacts, as they can be easily deposited on a large area of metal oxides, can modify the work function of these substrates, and reduce optical and electric losses with low material consumption. However, the most interesting thing about SAMs is that by modifying the chemical structure of the small molecules used, the energy levels, molecular dipoles, and surface properties of this assembled monolayer can be modulated to fine-tune the desired interactions between the substrate and the active layer. Due to the important role of organic chemistry in the field of photovoltaics, in this review, we will cover the current challenges for the design and synthesis of SAMs PSCs. Discussing, the structural features that define a SAM, (ii) disclosing how commercial molecules inspired the synthesis of new SAMs; and (iii) detailing the pros- and cons- of the reported synthetic protocols that have been employed for the synthesis of molecules for SAMs, helping synthetic chemists to develop novel structures and promoting the fast industrialization of PSCs.

Synthesis and evaluation of composite TiO2@ZnO quantum dots on hybrid nanostructure perovskite solar cell

This research is an interdisciplinary study aimed at helping the environment and producing clean energy. Therefore, one of the goals of this research towards the field of nanotechnology is the application of nanotechnology in the preparation of solar cells and the provision of optimal and efficient cells. Perovskite solar cells are of particular importance because of the high efficiencies that they have achieved in recent years. The use of quantum dots has also played an important role in the efficiency of these cells and their efficiency. The TiO₂@ZnO nanocomposite was selected and synthesized for this study. The application of this nanocomposite with different ratios of TiO₂ and ZnO quantum dots was investigated and their efficiency was determined. Although the efficiency of the fabricated cell was reported to be about 5% in a solar cell made of TiO₂@ZnO composite, the efficiency can be increased by optimizing conditions such as the optimal location for these cells or by compositing with other materials.

Phase-selective synthesis of lead-free CsMnBr3 and Cs3MnBr5 nanocrystals dependent on solvent concentration

We demonstrate the crystal phase-selective synthesis for lead-free cesium manganese bromine perovskite nanocrystals synthesized by the modified hot-injection method due to changing the concentration of solvent (trioctylphosphine; TOP). The compositions synthesized were determined by the amount of TOP solvent, and the structure phase of the nanocrystals was selected from hexagonal CsMnBr₃ to tetragonal Cs₃MnBr₅ as the amount of TOP solvent increased. The emission peaks of CsMnBr₃ and Cs₃MnBr₅ nanocrystals were observed at 650 nm (red) and 520 nm (green), respectively. After a durability test at 85°C and 85% humidity for 24 h, the lead-free perovskite CsMnBr₃ nanocrystal powder maintained its initial emission intensity, and the metal halide Cs₃MnBr₅ nanocrystal powder exhibited an increase in red emission due to the post-synthesis of CsMnBr₃ nanocrystals.

Structural Insight into La0.5Ca0.5Mn0.5Co0.5O3 Decomposition in the Methane Combustion Process

Perovskite-like solid solution La_0.5Ca_0.5Mn_0.5Co_0.5O₃ was tested during the total methane combustion reaction. During the reaction, there is a noticeable decrease in methane conversion, the rate of catalyst deactivation increasing with an increase in temperature. The in situ XRD and HRTEM methods show that the observed deactivation occurs as a result of the segregation of calcite and cobalt oxide particles on the perovskite surface. According to the TGA, the observed drop in catalytic activity is also associated with a large loss of oxygen from the perovskite structure.

Lateral Structured Phototransistor Based on Mesoscopic Graphene/Perovskite Heterojunctions

Due to their outstanding optical properties and superior charge carrier mobilities, organometal halide perovskites have been widely investigated in photodetection and solar cell areas. In perovskites photodetection devices, their high optical absorption and excellent quantum efficiency contribute to the responsivity, even the specific detectivity. In this work, we developed a lateral phototransistor based on mesoscopic graphene/perovskite heterojunctions. Graphene nanowall shows a porous structure, and the spaces between graphene nanowall are much appropriated for perovskite crystalline to mount in. Hot carriers are excited in perovskite, which is followed by the holes’ transfer to the graphene layer through the interfacial efficiently. Therefore, graphene plays the role of holes’ collecting material and carriers’ transporting channel. This charge transfer process is also verified by the luminescence spectra. We used the hybrid film to build phototransistor, which performed a high responsivity and specific detectivity of 2.0 × 10³ A/W and 7.2 × 10¹⁰ Jones, respectively. To understand the photoconductive mechanism, the perovskite’s passivation and the graphene photogating effect are proposed to contribute to the device’s performance. This study provides new routes for the application of perovskite film in photodetection.

CsPbBr3 Nanocrystals-Based Polymer Nanocomposite Films: Effect of Polymer on Spectroscopic Properties and Moisture Tolerance

Metal halide perovskites nanocrystals (NCs) represent an emerging class of materials that find increasing application in optoelectronic and photovoltaic devices, thanks to their intriguing optical properties, including high absorption coefficient, high fluorescence quantum yield (PL QY) and fast charge carrier separation. However, their opening to market is still hindered by their limited reliability, due to an intrinsic structural instability and degradation of their photophysical properties upon air, moisture, and light exposure. The incorporation of perovskite NCs in polymer matrix can limit some of the NC instability issues, with advantages in film processability, device fabrication and mechanical performance, being also useful for fundamental studies. In this regard, here, nanocomposites based on polymethylmethacrylate or polystyrene embedding all-inorganic CsPbBr3 NCs have been prepared and processed in the form of flexible free-standing films. A systematic spectrofluorimetric study, comprising steady state photoluminescence (PL), PL quantum yield (QY) and PL decay of the free-standing films before and after exposure to relative humidity condition (RH% 85%, at 25 °C) is performed and discussed. Phase segregation phenomena, changes in NC passivation and recombination dynamics are evaluated as a function of polymer loading and its molecular structure and finally the efficacy of the polymer as moisture barrier investigated.