Initiated Chemical Vapor Deposition of Crosslinked Organic Coatings for Controlling Gentamicin Delivery

Glucose-Responsive Boronic Acid Hydrogel Thin Films Obtained via Initiated Chemical Vapor Deposition

Glucose-responsive materials are of great importance in the field of monitoring the physiological glucose level or smart insulin management. This study presents the first vacuum-based deposition of a glucose-responsive hydrogel thin film. The successful vacuum-based synthesis of a glucose-responsive hydrogel may open the door to a vast variety of new applications, where, for example, the hydrogel thin film is applied on new possible substrates. In addition, vacuum-deposited films are free of leachables (e.g., plasticizers and residual solvents). Therefore, they are, in principle, safe for in-body applications. A hydrogel made of but-3-enylboronic acid units, a boronic acid compound, was synthesized via initiated chemical vapor deposition. The thin film was characterized in terms of chemical composition, surface morphology, and swelling response toward pH and sucrose, a glucose–fructose compound. The film was stable in aqueous solutions, consisting of polymerized boronic acid and the initiator unit, and had an undulating texture appearance (rms 2.1 nm). The hydrogel was in its shrunken state at pH 4–7 and swelled by increasing the pH to 9. The pK_a was 8.2 ± 0.2. The response to glucose was observed at pH 10 and resulted in thickness shrinking.

Initiated Chemical Vapor Deposition Kinetics of Poly(4-aminostyrene)

Initiated Chemical Vapor Deposition (iCVD) is a free-radical polymerization technique used to synthesize functional polymer thin films. In the context of drug delivery, the conformality of iCVD coatings and the variety of functional chemical moieties make them excellent materials for encapsulating pharmaceutics. Poly(4-aminostyrene) (PAS) belongs to a class of functionalizable materials, whose primary amine allows decoration of the delivery vehicles with biomolecules that enable targeted delivery or biocompatibility. Understanding kinetics of PAS polymerization in iCVD is crucial for such deployments because drug release kinetics in thin-film encapsulation have been shown to be determined by the film thickness. Nevertheless, the effects of deposition conditions on PAS growth kinetics have not been studied systematically. To bridge that knowledge gap, we report the kinetics of iCVD polymerization as a function of fractional saturation pressure of the monomer (i.e., Pm/Psat) in a dual-regime fashion, with quadratic dependence under low Pm/Psat and linear dependence under high Pm/Psat. We uncovered the critical Pm/Psat value of 0.2, around which the transition also occurs for many other iCVD monomers. Because existing theoretical models for the iCVD process cannot fully explain the dual-regime polymerization kinetics, we drew inspiration from solution-phase polymerization and proposed updated termination mechanisms that account for the transition between two regimes. The reported model builds upon existing iCVD theories and allows the synthesis of PAS thin films with precisely controlled growth rates, which has the potential to accelerate the deployment of iCVD PAS as a novel biomaterial in controlled and targeted drug delivery with designed pharmacokinetics.

Controlled Release Utilizing Initiated Chemical Vapor Deposited (iCVD) of Polymeric Nanolayers

This review will focus on the controlled release of pharmaceuticals and other organic molecules utilizing polymeric nanolayers grown by initiated chemical vapor deposited (iCVD). The iCVD layers are able conform to the geometry of the underlying substrate, facilitating release from one- and two-dimensional nanostructures with high surface area. The reactors for iCVD film growth can be customized for specific substrate geometries and scaled to large overall dimensions. The absence of surface tension in vapor deposition processes allows the synthesis of pinhole-free layers, even for iCVD layers <10 nm thick. Such ultrathin layers also provide rapid transport of the drug across the polymeric layer. The mild conditions of the iCVD process avoid damage to the drug which is being encapsulated. Smart release is enabled by iCVD hydrogels which are responsive to pH, temperature, or light. Biodegradable iCVD layers have also be demonstrated for drug release.

Drug-zein@lipid hybrid nanoparticles: Electrospraying preparation and drug extended release application

The reasonable selection and elaborate conversion of raw materials into desired functional products represent a main topic in modern material engineering. In this study, zein (a plant protein) and lipids (extracted from egg yolk) are converted into a new type of drug-polymer@lipid hybrid nanoparticles (HNPs) via modified coaxial electrospraying. Tamoxifen citrate (TC) is used as a model anticancer drug to prepare TC-zein monolithic nanocomposites (MNCs) via traditional blended electrospraying; these MNCs are then used for comparison. Modified coaxial electrospraying is a continuous and robust process for the preparation of solid particles because of the action of unsolidifiable shell lipid solutions. HNPs have a round morphology with clear core-shell nanostructures, whereas MNCs have an indented flat morphology. Although both hold the drug in an amorphous state because of the fine compatibility of TC and zein, HNPs demonstrate a better sustained release of TC compared with MNCs in terms of retarding initial burst release (6.7 %±2.9 % vs. 37.2 %±4.3 %) and prolonged linear release period (20.47 h vs. 4.97 h for releasing 90 % of the loaded drug). Mechanisms by which the shell's lipid layer adjusts the release behavior of TC molecules are proposed. The present protocol based on coaxial electrospraying shows a new strategy of combining edible protein and lipids to fabricate advanced functional nanomaterials.

Conformal Coating of Powder by Initiated Chemical Vapor Deposition on Vibrating Substrate

Encapsulation of pharmaceutical powders within thin functional polymer films is a powerful and versatile method to modify drug release properties. Conformal coating over the complete surface of the particle via chemical vapor deposition techniques is a challenging task due to the compromised gas–solid contact. In this study, an initiated chemical vapor deposition reactor was adapted with speakers and vibration of particles was achieved by playing AC/DC’s song “Thunderstruck” to overcome the above-mentioned problem. To show the possibilities of this method, two types of powder of very different particle sizes were chosen, magnesium citrate (3–10 µm, cohesive powder) and aspirin (100–500 µm, good flowability), and coated with poly-ethylene-glycol-di-methacrylate. The release curve of coated magnesium citrate powder was retarded compared to uncoated powder. However, neither changing the thickness coating nor vibrating the powder during the deposition had influence on the release parameters, indicating, that cohesive powders cannot be coated conformally. The release of coated aspirin was as well retarded as compared to uncoated aspirin, especially in the case of the powder that vibrated during deposition. We attribute the enhancement of the retarded release to the formation of a conformal coating on the aspirin powder.