Biogenic Silver Nanoparticles Decorated with Methylene Blue Potentiated the Photodynamic Inactivation of Pseudomonas aeruginosa and Staphylococcus aureus

Antimicrobial photodynamic inactivation of Pseudomonas aeruginosa persister cells and biofilms

Pseudomonas aeruginosa is a hard-to-treat human pathogen for which new antimicrobial agents are urgently needed. P. aeruginosa is known for forming biofilms, a complex aggregate of bacteria embedded in a self-generated protective matrix that enhance its resistance to antibiotics and the immune system. Within the biofilm, persister cells, sub-populations of slow-growing or growth-arrested cells, are associated with recalcitrance of infections and antibiotic treatment failure. Here, we investigate the influence of the anionic photosensitiser chlorophyllin (CHL)1 exposed to red light alone and in combination with an activator of the mechanosensitive channels butylparaben (BP) on P. aeruginosa growing cells, persister cells, and biofilms. Antimicrobial susceptibility tests were performed using the broth microdilution checkerboard method. Serine hydroxamate (SHX) was used for the induction of persister cells. Under illumination, a combination of CHL (250 µg/ml) and BP (97.12 µg/ml) reduced the number of growing cells and persister cells by 2.2±0.46 log10 and 1.7±0.15 log10, respectively after 30 min of exposure at 79 J/cm2. A higher concentration of BP (194.23 µg/ml) or longer exposure time (60 min at 158 J/cm2) effectively eliminated approximately ≥99.99 % of growing and persister cells. Visual evidence from confocal and TEM images illustrates the influence of CHL and red light, which intensifies when combined with BP. Nevertheless, the addition of BP did not enhance the efficacy of CHL against biofilms; CHL (500 µg/ml) reduced biofilm viability by 2.6 log10 at 791 J/cm2. No toxicity has been observed in darkness. This study highlights the potential antimicrobial effect of CHL against P. aeruginosa.

Light-Activable Silver Nanoparticles for Combatting Antibiotic-Resistant Bacteria and Biofilms

Silver nanoparticles (AgNPs) are among the most widely used nanoparticulate materials for antimicrobial applications. The innate antibacterial properties of AgNPs are closely associated with the release of silver ions (Ag+) and the generation of reactive oxygen species (ROS). Multiple reports have elaborated on the synergistic effect against bacteria by combining photosensitizers with AgNPs (PS-AgNPs). This combination allows for the light-activated generation of Ag+ and ROS from PS-AgNPs. This is an efficient and controlled approach for the effective elimination of pathogens and associated biofilms. This review summarizes the design and synthetic strategies to produce PS-AgNPs reported in the literature. First, we explore multiple bacterial cell death mechanisms associated with AgNPs and possible pathways for resistance against AgNPs and Ag+. The next sections summarize the recent findings on the design and application of PS-AgNPs for the inactivation of resistant and non-resistant bacterial strains as well as the elimination and inhibition of biofilms. Finally, the review describes major outcomes in the field and provides a perspective on the future applications of this burgeoning area of research.

A systematic overview of strategies for photosensitizer and light delivery in antibacterial photodynamic therapy for lung infections

Antimicrobial photodynamic therapy (aPDT) emerges as a viable treatment strategy for infections resistant to conventional antibiotics. A complex interplay of factors, including intracellular photosensitizer (PS) accumulation, photochemical reaction type, and oxygen levels, determines the efficacy of aPDT. Recent progress includes the development of modified PSs with enhanced lipophilicity and target-specific strategies to improve bacterial cell wall penetration and targeting. Nanotechnology-based approaches, such as using nanomaterials for targeted PS delivery, have shown promise in enhancing aPDT efficacy. Advancements in light delivery methods for aPDT, such as transillumination of large lesions and local light delivery using fiber optic techniques, are also being explored to optimize treatment efficacy in clinical settings. The limited number of animal models and clinical trials specifically designed to assess the efficacy of aPDT for lung infections highlights the need for further research in this critical area. The potential prospects of aPDT for lung tissue infections originating from antibiotic-resistant bacterial infections are also discussed in this review.

Hydrogels Associated with Photodynamic Therapy Have Antimicrobial Effect against Staphylococcus aureus: A Systematic Review

Staphylococcus aureus (S. aureus) is a Gram-positive bacterium that causes infections ranging from mild superficial cases to more severe, potentially fatal conditions. Many photosensitisers used in photodynamic therapy are more effective against superficial infections due to limitations in treating deeper tissue infections. Recently, attention to this bacterium has increased due to the emergence of multidrug-resistant strains, which complicate antibiotic treatment. As a result, alternative therapies, such as antimicrobial photodynamic therapy (PDT), have emerged as promising options for treating non-systemic infections. PDT combines a photosensitiser (PS) with light and oxygen to generate free radicals that destroy bacterial structures. This systematic review evaluates the effectiveness of PDT delivered via different types of hydrogels in treating wounds, burns, and contamination by S. aureus. Following PRISMA 2020 guidelines, a bibliographic search was conducted in PubMed, Web of Science, and Scopus databases, including articles published in English between 2013 and 2024. Seven relevant studies were included, demonstrating evidence of PDT use against S. aureus in in vitro and in vivo studies. We concluded that PDT can effectively complement antimicrobial therapy in the healing of wounds and burns. The effectiveness of this technique depends on the PS used, the type of hydrogel, and the lesion location. However, further in vivo studies are needed to confirm the safety and efficacy of PDT delivered via hydrogels.

Antibiotic Nanoparticles-Loaded Wound Dressings Against Pseudomonas aeruginosa's Skin Infection: A Systematic Review

Pseudomonas aeruginosa (P. aeruginosa) is a common nosocomial pathogen that can cause severe infections in critically ill patients. Due to its resistance to multiple drugs, it is challenging to treat, which can result in serious illness and death. Conventional treatments for infected wounds often involve the topical or systemic application of antibiotics, which can lead to systemic toxicity and the development of drug resistance. The combination of wound dressings that promote wound healing with nanoparticles (NPs) represents a revolutionary strategy for optimizing the safety and efficacy of antibiotics. This review assesses a systematic search to identify the latest approaches where the evaluation of wound dressings loaded with antibiotic NPs is conducted. The properties of NPs, the features of wound dressings, the antimicrobial activity and biocompatibility of the different strategies are analyzed. The results indicate that most research in this field is focused on dressings loaded with silver NPs (57.1%) or other inorganic materials (22.4%). Wound dressings loaded with polymeric NPs and carbon-based NPs represent 14.3% and 6.1% of the evaluated studies, respectively. Nevertheless, there are no clinical trials that have evaluated the efficacy of NPs-loaded wound dressings in patients. Further research is required to ensure the safety of these treatments and to translate the findings from the bench to the bedside.

In vitro study: methylene blue-based antibacterial photodynamic inactivation of Pseudomonas aeruginosa

Pseudomonas aeruginosa is one of the most antibiotic-resistant and opportunistic pathogens in immunocompromised and debilitated patients. It is considered the cause of most severe skin infections and is frequently found in hospital burn units. Due to its high antibiotic resistance, eliminating P. aeruginosa from skin infections is quite challenging. Therefore, this study aims to assess the novel in vitro antibacterial activity of methylene blue using a 635-nm diode laser to determine the effective power and energy densities for inhibition of P. aeruginosa. The strain was treated with various concentrations of methylene blue and 635-nm diode laser at powers of 300 mW/cm2 and 250 mW/cm2. The diode laser's potency in the photo-destruction of methylene blue and its degradation through P. aeruginosa were also evaluated. Colony-forming unit (CFU)/ml, fluorescence spectroscopy, optical density, and confocal microscopy were used to measure the bacterial killing effect. As a result, the significant decrease of P. aeruginosa was 2.15-log10, 2.71-log10, and 3.48-log10 at 60, 75, and 90 J/cm2 after excitation of MB for 240, 300, and 360 s at a power of 250 mW/cm2, respectively. However, a maximum decrease in CFU was observed by 2.54-log10 at 72 J/cm2 and 4.32-log10 at 90 and 108 J/cm2 after 300 mW/cm2 of irradiation. Fluorescence images confirmed the elimination of bacteria and showed a high degree of photo-destruction compared to treatment with methylene blue and light alone. In conclusion, MB-induced aPDT demonstrated high efficacy, which could be a potential approach against drug-resistant pathogenic bacteria. KEY POINTS: • Combination of methylene blue with 635-nm diode laser for antibacterial activity. • Methylene blue photosensitizer is employed as an alternative to antibiotics. • aPDT showed promising antibacterial activity against Pseudomonas aeruginosa.

Photodynamic therapy for the treatment of Pseudomonas aeruginosa infections: A scoping review

BACKGROUND

Pseudomonas aeruginosa is a Gram-negative bacillus that causes superficial and deep infections, which can be minor to life-threatening. Recently, P. aeruginosa has gained significant relevance due to the increased incidence of multidrug-resistant (MDR) strains that complicate antibiotic treatment. Due to MDR strains, alternative therapies, such as antimicrobial photodynamic therapy (PDT), are presented as a good option to treat nonsystemic infections. PDT combines a photosensitizer agent (PS), light, and oxygen to generate free radicals that destroy bacterial structures such as the envelope, matrix, and genetic material. This work aimed to identify the development stage of the PDT applied to P. aeruginosa to conclude which research stage should be emphasized more.

METHODS

Systematic bibliographic search in various public databases was performed. Related articles were identified using keywords, and relevant ones were selected using inclusion and exclusion criteria according to the PRISMA protocol.

RESULTS

We found 29 articles that meet the criteria, constituting a good body of evidence associated with using PDT against P. aeruginosa in vitro and less developed for in vivo research.

CONCLUSIONS

We conclude that PDT could become an effective adjunct to antimicrobial therapy against P. aeruginosa. This effectiveness depends on the PS used and the location of the infection. Many PS already demonstrated efficacy in PDT, but the evidence is supported significantly by in vitro and very few in vivo studies. Therefore, we conclude that further research efforts should focus on demonstrating the safety and efficacy of these PSs in vivo in animal infection models.

Antibacterial nanophotosensitizers in photodynamic therapy: An update

Bacterial infections constitute a major challenge of clinical medicine, particularly in specialties such as dermatology and dental medicine. Antiseptics and antibiotics are the main adjunctive therapies to anti-infective procedures in these specialties. However, antibacterial photodynamic therapy (PDT) has been introduced as a novel and promising alternative to conventional antibacterial approaches. PDT relies on the formation of reactive oxygen species (ROS) by a photosensitizer (PS) after activation by a specific light source. Nanotechnology was later introduced to enhance the antibacterial efficacy of PS during PDT. In this review, we describe the different nanoparticles (NPs) used in PDT and their properties. Recent in vivo data of NPs in antibacterial PDT in dermatology and dental medicine and their safety concerns are also reviewed.

Characterization of Physical and Biological Properties of a Caries-Arresting Liquid Containing Copper Doped Bioglass Nanoparticles

Silver diamine fluoride (SDF) is an outstanding dental material for arresting and preventing caries, but some drawbacks, such as high flowability due to low viscosity and cytotoxicity to the pulp, have been reported. To overcome these problems, copper-doped bioactive glass nanoparticles (CuBGns) were combined with SDF. After synthesis, CuBGns were examined by physical analysis and added in SDF at different weight/volume% (SDF@CuBGn). After assessing physical properties (viscosity and flowability) of SDF@CuBGn, physicochemical properties (morphology before and after simulated body fluid (SBF) immersion and ion release) of SDF@CuBGn-applied hydroxyapatite (HA) discs were evaluated. Biological properties were further evaluated by cytotoxicity test to pulp stem cells and antibacterial effect on cariogenic organisms (Streptococcus mutans and Staphylococcus aureus). Combining CuBGns in SDF increased the viscosity up to 3 times while lowering the flowability. More CuBGns and functional elements in SDF (Ag and F) were deposited on the HA substrate, even after SBF immersion test for 14 days, and they showed higher Cu, Ca, and Si release without changing F and Ag release. Cell viability test suggested lower cytotoxicity in SDF@CuBGn-applied HA, while CuBGns in SDF boosted antibacterial effect against S. aureus, ~27% in diameter of agar diffusion test. In conclusion, the addition of CuBGn to SDF enhances viscosity, Ag and F deposition, and antibacterial effects while reducing cell toxicity, highlighting the role of bioactive CuBGns for regulating physical and biological effects of dental materials.

Biodegradable MoO x @MB incorporated hydrogel as light-activated dressing for rapid and safe bacteria eradication and wound healing

Wounds infected with drug-resistant bacteria are hard to treat, which remains a serious problem in clinical practice. An innovative strategy for treating wound infections is thus imperative. Herein, we describe the construction of a nanocomposite from biocompatible poly(vinyl alcohol) (PVA)/polyethylene glycol (PEG) hydrogel loaded biodegradable MoO x nanoparticles (NPs) and photosensitizer methylene blue (MB), denoted as MoO x @MB-hy. By incorporating MoO x @MB NPs, the nanocomposite hydrogel can act as a photoactivated wound dressing for near-infrared-II 1064 nm and 660 nm laser synergetic photothermal-photodynamic therapy (PTT-PDT). The key to PTT-induced heat becomes the most controllable release of MB from MoO x @MB-hy to produce more 1O2 under 660 nm irradiation. Importantly, MoO x @MB-hy can consume glutathione (GSH) and trap bacteria nearer to the distance limit of ROS damage to achieve a self-migration-enhanced accumulation of reactive oxygen species (ROS), thereby conquering the intrinsic shortcomings of short diffusion distance and lifetime of ROS. Consequently, MoO x @MB-hy has high antibacterial efficiencies of 99.28% and 99.16% against Ampr E. coli and B. subtilis within 15 min. Moreover, the light-activated strategy can rapidly promote healing in wounds infected by drug-resistant bacteria. This work paves a way to design a novel nanocomposite hydrogel dressing for safe and highly-efficient antibacterial therapy.

Applications of Antimicrobial Photodynamic Therapy against Bacterial Biofilms

Antimicrobial photodynamic therapy and allied photodynamic antimicrobial chemotherapy have shown remarkable activity against bacterial pathogens in both planktonic and biofilm forms. There has been little or no resistance development against antimicrobial photodynamic therapy. Furthermore, recent developments in therapies that involve antimicrobial photodynamic therapy in combination with photothermal hyperthermia therapy, magnetic hyperthermia therapy, antibiotic chemotherapy and cold atmospheric pressure plasma therapy have shown additive and synergistic enhancement of its efficacy. This paper reviews applications of antimicrobial photodynamic therapy and non-invasive combination therapies often used with it, including sonodynamic therapy and nanozyme enhanced photodynamic therapy. The antimicrobial and antibiofilm mechanisms are discussed. This review proposes that these technologies have a great potential to overcome the bacterial resistance associated with bacterial biofilm formation.

Screening of Chitosan Derivatives-Carbon Dots Based on Antibacterial Activity and Application in Anti-Staphylococcus aureus Biofilm

Introduction

Pathogenic bacteria, especially the ones with highly organized, systematic aggregating bacteria biofilm, would cause great harm to human health. The development of highly efficient antibacterial and antibiofilm functional fluorescent nanomaterial would be of great significance.

Methods

This paper reports the preparation of a series of antibacterial functional carbon dots (CDs) with chitosan (CS) and its derivatives as raw materials through one-step route, and the impact of various experiment parameters upon the optical properties and the antibacterial abilities have been explored, including the structures of the raw materials, excipients, and solvents.

Results

The CDs prepared by quaternary ammonium salt of chitosan (QCS) and ethylenediamine (EDA) exhibit multiple antibacterial effects through membrane breaking, DNA and protein destroying, and the production of singlet oxygen. The CDs showed excellent broad-spectrum inhibitory activity against a variety of bacteria (Gram-positive and negative bacteria), in particular, to the biofilm of Staphylococcus aureus with minimum inhibitory concentration at 10 µg/mL, showing great potential in killing bacteria and biofilms. The biocompatibility experiments proved that QCS-EDA-CDs are non-toxic to human normal hepatocytes and have low haemolytic effect. Furthermore, the prepared QCS-EDA-CDs have been successfully used in bacterial and biofilm imaging thanks to their excellent optical properties.

Conclusion

This paper explored the preparation and application of functional CDs, which can be used as the visual probe and therapeutic agents in the treatment of infections caused by bacteria and biofilm.

Optical clearing of tissues: Issues of antimicrobial phototherapy and drug delivery

This review presents principles and novelties in the field of tissue optical clearing (TOC) technology, as well as application for optical monitoring of drug delivery and effective antimicrobial phototherapy. TOC is based on altering the optical properties of tissue through the introduction of immersion optical cleaning agents (OCA), which impregnate the tissue of interest. We also analyze various methods and kinetics of delivery of photodynamic agents, nanoantibiotics and their mixtures with OCAs into the tissue depth in the context of antimicrobial and antifungal phototherapy. In vitro and in vivo studies of antimicrobial phototherapies, such as photodynamic, photothermal plasmonic and photocatalytic, are summarized, and the prospects of a new TOC technology for effective killing of pathogens are discussed.

Antimicrobial Photodynamic Therapy: Latest Developments with a Focus on Combinatory Strategies

Antimicrobial photodynamic therapy (aPDT) has become a fundamental tool in modern therapeutics, notably due to the expanding versatility of photosensitizers (PSs) and the numerous possibilities to combine aPDT with other antimicrobial treatments to combat localized infections. After revisiting the basic principles of aPDT, this review first highlights the current state of the art of curative or preventive aPDT applications with relevant clinical trials. In addition, the most recent developments in photochemistry and photophysics as well as advanced carrier systems in the context of aPDT are provided, with a focus on the latest generations of efficient and versatile PSs and the progress towards hybrid-multicomponent systems. In particular, deeper insight into combinatory aPDT approaches is afforded, involving non-radiative or other light-based modalities. Selected aPDT perspectives are outlined, pointing out new strategies to target and treat microorganisms. Finally, the review works out the evolution of the conceptually simple PDT methodology towards a much more sophisticated, integrated, and innovative technology as an important element of potent antimicrobial strategies.

Latest trends on photodynamic disinfection of Gram-negative bacteria: photosensitizer's structure and delivery systems

Antimicrobial resistance is threatening to overshadow last century's medical advances. Etiological agents of previously eradicated infectious diseases are now resurgent as multidrug-resistant strains, especially for Gram-negative strains. Finding new therapeutic solutions is a real challenge for our society. In this framework, Photodynamic Antimicrobial ChemoTherapy relies on the generation of toxic reactive oxygen species in the presence of light, oxygen, and a photosensitizer molecule. The use of reactive oxygen species is common for disinfection processes, using chemical agents, such as chlorine and hydrogen peroxide, and as they do not have a specific molecular target, it decreases the potential of tolerance to the antimicrobial treatment. However, light-driven generated reactive species result in an interesting alternative, as reactive species generation can be easily tuned with light irradiation and several PSs are known for their low environmental impact. Over the past few years, this topic has been thoroughly studied, exploring strategies based on single-molecule PSs (tetrapyrrolic compounds, dipyrrinate derivatives, metal complexes, etc.) or on conjunction with delivery systems. The present work describes some of the most relevant advances of the last 6 years, focusing on photosensitizers design, formulation, and potentiation, aiming for the disinfection of Gram-negative bacteria.

Photoactive electrospun cellulose acetate/polyethylene oxide/methylene blue and trilayered cellulose acetate/polyethylene oxide/silk fibroin/ciprofloxacin nanofibers for chronic wound healing

This study aimed to synthesize cellulose acetate (CA)-based electrospun nanofibers as drug delivery dressings for chronic wound healing. For the first time, CA was blended with polyethylene oxide (PEO) using acetone and formic acid. Methylene blue (MB) was incorporated into monolayered random CA/PEO nanofibers. They had a diameter of 400-600 nm, were hydrophilic, and generated reactive oxygen species upon irradiation. Thus, they mediated antimicrobial photodynamic inactivation (aPDI) against isolated biofilm-forming Staphylococcus aureus, Klebsiella pneumoniae, and Pseudomonas aeruginosa. Bacterial survival, biofilm mass, and produced pyocyanin of the treated groups declined by 90%, 80%, and 3 folds, respectively. On the other hand, ciprofloxacin (Cipro) was loaded into an innovative trilayered aligned nanofiber consisting of CA/PEO surrounding a blank layer of silk fibroin. Cipro and MB release followed the Korsmeyer-Peppas model. An infected diabetic wound mouse model was established and treated with either MB-aPDI or Cipro. A combined therapy group of MB-aPDI followed by Cipro was included. The combined therapy showed significantly better results than monotherapies delineated by elevation in re-epithelization, collagen deposition, CD34, and TGF-β expression, along with a decline in CD95+ cells. This study deduced that drug-loaded CA electrospun nanofibers might be exploited in multimodal chronic wound healing.

Simultaneous exposure to intracellular and extracellular photosensitizers for the treatment of Staphylococcus aureus infections

Staphylococcus aureus is a serious threat to public health due to the rise of antibiotic resistance in this organism, which can prolong or exacerbate skin and soft tissue infections (SSTIs). Methicillin-resistant S. aureus is a Gram-positive bacterium and a leading cause of SSTIs. As such, many efforts are underway to develop therapies that target essential biological processes in S. aureus. Antimicrobial photodynamic therapy is effective alternative to antibiotics, therefore we developed an approach to simultaneously expose S. aureus to intracellular and extracellular photoactivators. A near infrared photosensitizer was conjugated to human monoclonal antibodies (mAbs) that target the S. aureus Isd heme acquisition proteins. Additionally, the compound VU0038882 was developed to increase photoactivatable porphyrins within the cell. Combinatorial PDT treatment of drug-resistant S. aureus exposed to VU0038882 and conjugated anti-Isd mAbs proved to be an effective antibacterial strategy in vitro and in a murine model of SSTIs.

A Review on Silver Nanoparticles: Classification, Various Methods of Synthesis, and Their Potential Roles in Biomedical Applications and Water Treatment

Recent developments in nanoscience have appreciably modified how diseases are prevented, diagnosed, and treated. Metal nanoparticles, specifically silver nanoparticles (AgNPs), are widely used in bioscience. From time to time, various synthetic methods for the synthesis of AgNPs are reported, i.e., physical, chemical, and photochemical ones. However, among these, most are expensive and not eco-friendly. The physicochemical parameters such as temperature, use of a dispersing agent, surfactant, and others greatly influence the quality and quantity of the synthesized NPs and ultimately affect the material’s properties. Scientists worldwide are trying to synthesize NPs and are devising methods that are easy to apply, eco-friendly, and economical. Among such strategies is the biogenic method, where plants are used as the source of reducing and capping agents. In this review, we intend to debate different strategies of AgNP synthesis. Although, different preparation strategies are in use to synthesize AgNPs such as electron irradiation, optical device ablation, chemical reduction, organic procedures, and photochemical methods. However, biogenic processes are preferably used, as they are environment-friendly and economical. The review covers a comprehensive discussion on the biological activities of AgNPs, such as antimicrobial, anticancer anti-inflammatory, and anti-angiogenic potentials of AgNPs. The use of AgNPs in water treatment and disinfection has also been discussed in detail.

Development of photoresponsive zinc oxide nanoparticle - encapsulated lignin functionalized with 2-[(E)-(2-hydroxy naphthalen-1-yl) diazenyl] benzoic acid: A promising photoactive agent for antimicrobial photodynamic therapy

BACKGROUND

By coalescing nanotechnology with photochemistry and microbiology, a new type of photoactive antimicrobial agent based on zinc oxide nanoparticles incorporated into biomacromolecular lignin was formulated, which possesses a wide-spectrum antimicrobial activity, providing effects in the field of antimicrobial photodynamic therapy.

METHODS

The biomacromolecule lignin was functionally modified with 2-[(E)-(2-hydroxy naphthalen-1-yl) diazenyl] benzoic acid by Steglich esterification, and loaded with zinc oxide nanoparticles. The products were characterized by UV-Visible, FTIR, and NMR spectroscopic techniques, and by SEM, TEM, and X-ray diffraction analysis (XRD). The photoresponsive behavior of the dye, functionally modified lignin-dye ester and its nanoparticle dispersed product was investigated. The photoinduced antibacterial and antifungal effects of zinc oxide nanoparticle encapsulated functionally modified lignin were explicated in detail.

RESULTS

The photostabilization property of the chromophoric system was found to be enhanced when attached to lignin, and was further improved by the encapsulation of photoactive zinc oxide nanoparticles. The detailed studies on the photoinduced antibacterial and antifungal property revealed that upon light irradiation the antibacterial and antifungal efficacies of the test system got magnified.

CONCLUSIONS

Incorporation of photoactive zinc oxide nanoparticles into the functionalized macromolecular system could make important changes in their photoresponsive abilities such as enhanced light absorption behavior and photostabilization properties enriched with photoinduced antimicrobial efficacy, which rendered the functionally modified system a potential photoinduced antimicrobial agent. They may find use in various biomedical applications especially in antimicrobial photodynamic therapy.

Enhanced Antibacterial and Anti-Biofilm Activities of Antimicrobial Peptides Modified Silver Nanoparticles

Background

The biofilms could protect bacteria from antibiotics and promote the production of drug-resistant strains, making the bacteria more difficult to be eradicated. Thus, we developed an AMP@PDA@AgNPs nanocomposite, which is formed by modifying silver nanoparticles (AgNPs) with antimicrobial peptides (AMP) modified nanocomposite to destroy biofilm in this study.

Methods

The AMP@PDA@AgNPs nanocomposite was prepared with polymerization method and characterized by using ultraviolet-visible (UV-vis) spectroscopy, dynamic light scattering (DLS), Fourier transform-infrared spectroscopy (FT-IR), and transmission electron microscope (TEM). The antibacterial effects of the nanocomposite were investigated by using agar diffusion method and minimum inhibitory concentration (MIC) test. The quantitative analysis of the biofilm formation by the nanocomposite was conducted using crystal violet staining and confocal laser scanning microscope (CLSM).

Results

The DLS and TEM analysis showed it was a spherical nanocomposite with 200 nm size and well dispersed . The results of UV-vis and FT-IR confirmed the presence of AMP and AgNPs. The nanocomposite had an excellent biocompatibility at 100 μg/mL. And the AMP@PDA@AgNPs nanocomposite showed superior antimicrobial activity against both Gram-negative (E. coli, P. aeruginosa) and Gram-positive (S. aureus) bacteria than AgNPs or AMP. Importantly, the mRNA expression of biofilm-related genes were decreased under the action of the nanocomposites.

Conclusion

An AMP@PDA@AgNPs nanocomposite with good biocompatibility was successfully prepared. The nanocomposite could destruct bacterial biofilms by inhibiting the expression of biofilm-related genes. The synergistic strategy of AMPs and AgNPs could provide a new perspective for the treatment of bacterial infection.

Antimicrobial Polymer-Based Assemblies: A Review

An antimicrobial supramolecular assembly (ASA) is conspicuous in biomedical applications. Among the alternatives to overcome microbial resistance to antibiotics and drugs, ASAs, including antimicrobial peptides (AMPs) and polymers (APs), provide formulations with optimal antimicrobial activity and acceptable toxicity. AMPs and APs have been delivered by a variety of carriers such as nanoparticles, coatings, multilayers, hydrogels, liposomes, nanodisks, lyotropic lipid phases, nanostructured lipid carriers, etc. They have similar mechanisms of action involving adsorption to the cell wall, penetration across the cell membrane, and microbe lysis. APs, however, offer the advantage of cheap synthetic procedures, chemical stability, and improved adsorption (due to multipoint attachment to microbes), as compared to the expensive synthetic routes, poor yield, and subpar in vivo stability seen in AMPs. We review recent advances in polymer-based antimicrobial assemblies involving AMPs and APs.

Photodynamic Therapy—An Up-to-Date Review

The healing power of light has attracted interest for thousands of years. Scientific discoveries and technological advancements in the field have eventually led to the emergence of photodynamic therapy, which soon became a promising approach in treating a broad range of diseases. Based on the interaction between light, molecular oxygen, and various photosensitizers, photodynamic therapy represents a non-invasive, non-toxic, repeatable procedure for tumor treatment, wound healing, and pathogens inactivation. However, classic photosensitizing compounds impose limitations on their clinical applications. Aiming to overcome these drawbacks, nanotechnology came as a solution for improving targeting efficiency, release control, and solubility of traditional photosensitizers. This paper proposes a comprehensive path, starting with the photodynamic therapy mechanism, evolution over the years, integration of nanotechnology, and ending with a detailed review of the most important applications of this therapeutic approach.

Best served small: nano battles in the war against wound biofilm infections

The global challenge of antimicrobial resistance is of increasing concern, and alternatives to currently used antibiotics or methods to improve their stewardship are sought worldwide. Microbial biofilms, complex 3D communities of bacteria and/or fungi, are difficult to treat with antibiotics for several reasons. These include their protective coats of extracellular matrix proteins which are difficult for antibiotics to penetrate. Nanoparticles (NP) are one way to rise to this challenge; whilst they exist in many forms naturally there has been a profusion in synthesis of these small (<100 nm) particles for biomedical applications. Their small size allows them to penetrate the biofilm matrix, and as well as some NP being inherently antimicrobial, they also can be modified by doping with antimicrobial payloads or coated to increase their effectiveness. This mini-review examines the current role of NP in treating wound biofilms and the rise in multifunctionality of NP.

Design of Photosensitizing Agents for Targeted Antimicrobial Photodynamic Therapy

Photodynamic inactivation of microorganisms has gained substantial attention due to its unique mode of action, in which pathogens are unable to generate resistance, and due to the fact that it can be applied in a minimally invasive manner. In photodynamic therapy (PDT), a non-toxic photosensitizer (PS) is activated by a specific wavelength of light and generates highly cytotoxic reactive oxygen species (ROS) such as superoxide (O2-, type-I mechanism) or singlet oxygen (1O2*, type-II mechanism). Although it offers many advantages over conventional treatment methods, ROS-mediated microbial killing is often faced with the issues of accessibility, poor selectivity and off-target damage. Thus, several strategies have been employed to develop target-specific antimicrobial PDT (aPDT). This includes conjugation of known PS building-blocks to either non-specific cationic moieties or target-specific antibiotics and antimicrobial peptides, or combining them with targeting nanomaterials. In this review, we summarise these general strategies and related challenges, and highlight recent developments in targeted aPDT.