Preparation and In Vivo Evaluation of a Lidocaine Self-Nanoemulsifying Ointment with Glycerol Monostearate for Local Delivery

Study of the preparation, characterization, and solubility of lidocaine complexed with 5-sulfosalicylic acid dihydrate

OBJECTIVE

This study was to prepare solid dispersions of lidocaine (Lid) with 5-sulfosalicylic acid dihydrate (SSA) by freeze-drying (freeze-dried [FD] Lid/SSA = 1/1) and to evaluate their physical properties.

METHODS

Here, we evaluated the physicochemical properties and solubility of solid dispersions of Lid and SSA prepared by freeze-drying (freeze-dried [FD] Lid/SSA = 1/1).

RESULTS

Differential scanning calorimetry measurements showed that after freeze-drying, the endothermic peak due to Lid melting, the dehydration peak, and the endothermic peak due to SSA melting disappeared. Powder X-ray diffraction results showed that the characteristic Lid and SSA peaks disappeared after freeze-drying, indicating a halo pattern. The near-infrared spectroscopy results suggested that Lid-derived -NH and -CH groups and the Lid-derived -OH and -CH groups from the SSA peak shifted and broadened after freeze-drying, suggesting their involvement in complex formation through Lid/SSA intermolecular interactions. Nuclear Overhauser effect spectroscopy-nuclear magnetic resonance (NMR) measurements showed a cross-peak due to the interaction between the Lid-derived -CH group and the SSA-derived -OH group, suggesting hydrogen bonding. Diffusion-ordered spectroscopy NMR measurements showed that the diffusion coefficients of Lid and SSA aggregated in FD Lid/SSA, suggesting a change in Lid dispersibility in the solvent owing to the formation of a complex with SSA. The solubility of FD Lid/SSA was approximately 88 mg/mL (∼20-fold higher than that of Lid).

CONCLUSIONS

These findings suggest that complex formation occurred in FD Lid/SSA; this enhanced the solubility of this dispersion.

Topical drug delivery by Sepineo P600 emulgel: Relationship between rheology, physical stability, and formulation performance

The objective of this present work was to develop and optimize oil-in-water (O/W) emulsion-based gels, namely emulgels that allow maximum topical drug delivery while having desired microstructure and acceptable physical stability. Emulgels containing 2.0 wt% lidocaine were prepared using various concentrations (0.75-5.0 wt%) of Sepineo P600. Their droplet size distribution, physical stability, rheological behaviors, in vitro drug release, and skin permeation profiles were evaluated. Results show that the concentration of Sepineo P600 significantly influenced the microstructure, rheology, and physical stability of the emulgel formulations. The physico-chemical properties also reveals that at least 1.0 wt% Sepineo P600 was needed to produce stable emulgel formulations. All formulations exhibited non-Newtonian shear-thinning properties which are desirable for topical applications. Both the release and permeation rates decreased with increasing viscosity and rigidity of the formulation. The lower the complex modulus of the emulgels, the higher the steady-state flux of the drug through the skin. Adding Sepineo P600 to emulgel systems resulted in increased rheological properties, which in turn slowed the diffusion of the drug for in vitro release. Although as expected skin permeation was rate limiting since in vitro release was 3 to 4 log-fold faster than skin flux. However, an interesting finding was that the derived skin/vehicle partition coefficient suggested the ionic interaction between lidocaine and Sepineo polymer reducing the free drug, i.e., thermodynamic activity and hence the flux with increasing Sepineo P600 concentration. Overall, this study has provided us with valuable insights into understanding the relationship between the microstructure (rheology), physical stability and skin drug delivery properties which will help to design and optimize topical emulgel formulations.

A simple, fast, and cost-effective smartphone-based digital imaging method for quantification of lidocaine hydrochloride in pharmaceutical formulations

OBJECTIVE

A simple, highly specific, accurate and fast method by smartphone-based digital imaging was developed for estimating lidocaine hydrochloride in pharmaceutical formulations.

MATERIAL AND METHODS

To obtain the images, a Galaxy A03 Core smartphone and an image acquisition device developed in the laboratory were used to control the incident factors in reproducibility of the measurements. The processing of the images was carried out with the Color Grab application. Finally, the absorbance values were calculated using the RGB intensity values of blank, standard, and sample solutions. The proposed method was compared with spectroscopic and chromatographic methods.

RESULTS

The reaction between copper and lidocaine hydrochloride was characterized, showing better results in an equimolar ratio and maintaining the pH of the solution above 11.5. The use of the device for the capture of digital images allowed to control those sensitive parameters for reproducibility so that the analytical measurements showed adequate precision and accuracy. Validation of the main parameters of the method showed compliance with acceptance criteria. The application of the method for the analysis of injectable samples achieved reliable results, which were statistically similar to other reference instrumental methods.

CONCLUSION

The proposed method presented figures of merit in relation to linearity, precision, selectivity, accuracy, and robustness; it was carried out by designing and manufacturing a device for capturing digital images on a smartphone, which were analyzed to obtain RGB intensity values. These data are finally used to calculate absorbance values of solutions. All these elements provide this work with innovative characteristics in the field of analysis for control of pharmaceutical formulations.

Recent Research Advances in Nano-Based Drug Delivery Systems for Local Anesthetics

From a clinical perspective, local anesthetics have rather widespread application in regional blockade for surgery, postoperative analgesia, acute/chronic pain control, and even cancer treatments. However, a number of disadvantages are associated with traditional local anesthetic agents as well as routine drug delivery administration ways, such as neurotoxicity, short half-time, and non-sustained release, thereby limiting their application in clinical practice. Successful characterization of drug delivery systems (DDSs) for individual local anesthetic agents can support to achieve more efficient drug release and prolonged duration of action with reduced systemic toxicity. Different types of DDSs involving various carriers have been examined, including micromaterials, nanomaterials, and cyclodextrin. Among them, nanotechnology-based delivery approaches have significantly developed in the last decade due to the low systemic toxicity and the greater efficacy of non-conventional local anesthetics. Multiple nanosized materials, including polymeric, lipid (solid lipid nanoparticles, nanostructured lipid carriers, and nanoemulsions), metallic, inorganic non-metallic, and hybrid nanoparticles, offer a safe, localized, and long-acting solution for pain management and tumor therapy. This review provides a brief synopsis of different nano-based DDSs for local anesthetics with variable sizes and structural morphology, such as nanocapsules and nanospheres. Recent original research utilizing nanotechnology-based delivery systems is particularly discussed, and the progress and strengths of these DDSs are highlighted. A specific focus of this review is the comparison of various nano-based DDSs for local anesthetics, which can offer additional indications for their further improvement. All in all, nano-based DDSs with unique advantages provide a novel direction for the development of safer and more effective local anesthetic formulations.

Influence of Manufacturing Process on the Microstructure, Stability, and Sensorial Properties of a Topical Ointment Formulation

The manufacturing process for ointments typically involves a series of heating, cooling, and mixing steps. Precise control of the level of mixing through homogenization and the cooling rate, as well as temperature at different stages, is important in delivering ointments with the desired quality attributes, stability, and performance. In this work, we investigated the influence of typical plant processing conditions on the microstructure, stability, and sensorial properties of a model ointment system through a Design of Experiments (DoE) approach. Homogenization speed at the cooling stage after the addition of the solvent (propylene glycol, PG) was found to be the critical processing parameter that affects stability and the rheological and sensorial properties of the ointment. A lower PG addition temperature was also found to be beneficial. The stabilization of the ointment at a lower PG addition temperature was hypothesized to be due to more effective encapsulation by crystallizing mono- and diglycerides at the lower temperature. The in vitro release profiles were found to be not influenced by the processing parameters, suggesting that for the ointment platform studied, processing affects the microstructure, but the effects do not translate into the release profile, a key performance indicator. Our systematic study represents a Quality-by-Design (QbD) approach to the design of a robust manufacturing process for delivering stable ointments with the desired performance attributes and properties.

Inhaled deep eutectic solvent based-nanoemulsion of pirfenidone in idiopathic pulmonary fibrosis

Pirfenidone (PRF), the first FDA-approved drug to treat idiopathic pulmonary fibrosis (IPF) and formulated as an oral dosage form, has many side effects. To enhance the therapeutic effect, we discovered a high-load nanoemulsion using a novel deep eutectic solvent (DES) and developed an inhalation drug with improved bioavailability. The DES of PRF and N-acetylcysteine were discovered, and their physicochemical properties were evaluated in this study. The mechanism of DES formation was confirmed by FT-IR and ¹H NMR and suggested to involve hydrogen bonding. The DES nanoemulsion in which the nano-sized droplets were dispersed is optimized by mixing the DES and distilled water in a ratio. The in vivo pharmacokinetic study showed that the pulmonary route of administration is superior to that of the oral route, and the DES nanoemulsion is superior to that of the PRF solution in achieving better bioavailability and lung distribution. The therapeutic effect of PRF for IPF could be confirmed through in vivo pharmacodynamics studies, including lung function assessment, enzyme-linked immunosorbent assay, histology, and micro-computed tomography using the bleomycin-induced IPF rat model. In addition, the pulmonary route administration of PRF is advantageous in reducing the toxicity risk.

Amphiphilic Chitosan Porous Membranes as Potential Therapeutic Systems with Analgesic Effect for Burn Care

Eliminating or at least lessening the pain is a crucial aspect of burns management, as pain can negatively affect mental health and quality of life, and it can also induce a delay on wound healing. In this context, new amphiphilic chitosan 3D porous membranes were developed and investigated as burns therapeutic systems with analgesic effect for delivery of lidocaine as local anesthetic. The highly porous morphology of the membranes and the structural modifications were evidenced by scanning electron microscopy (SEM), energy dispersive X-ray (EDX) analysis and infrared spectroscopy (FTIR). Improved compression mechanical properties, long-term hydrolytic degradation (28 days) evaluation and high swelling capacities (ranging from 8 to 22.6 g/g) indicate an increased capacity of the prepared membranes to absorb physiological fluids (burns exudate). Lidocaine in vitro release efficiency was favored by the decreased content of cross-linking agent (reaching maximum value of 95.24%) and the kinetic data modeling, indicating that lidocaine release occurs by quasi-Fickian diffusion. In addition to the in vitro evaluation of analgesic effect, lidocaine-loaded chitosan membranes were successfully investigated and proved antibacterial activity against most common pathogens in burns infections: Staphylococcus aureus and Methicillin-resistant Staphylococcus aureus.

Nanolipogel Loaded with Tea Tree Oil for the Management of Burn: GC-MS Analysis, In Vitro and In Vivo Evaluation

The GC-MS analysis of tea tree oil (TTO) revealed 38 volatile components with sesquiterpene hydrocarbons (43.56%) and alcohols (41.03%) as major detected classes. TTO efficacy is masked by its hydrophobicity; nanoencapsulation can address this drawback. The results showed that TTO-loaded solid lipid nanoparticles (SLN1), composed of glyceryl monostearate (2% w/w) and Poloxamer188 (5% w/w), was spherical in shape with a core-shell microstructure. TTO-SLN1 showed a high entrapment efficiency (96.26 ± 2.3%), small particle size (235.0 ± 20.4 nm), low polydispersity index (0.31 ± 0.01), and high negative Zeta potential (−32 mV). Moreover, it exhibited a faster active agent release (almost complete within 4 h) compared to other formulated TTO-SLNs as well as the plain oil. TTO-SLN1 was then incorporated into cellulose nanofibers gel, isolated from sugarcane bagasse, to form the ‘TTO-loaded nanolipogel’ which had a shear-thinning behavior. Second-degree thermal injuries were induced in Wistar rats, then the burned skin areas were treated daily for 7 days with the TTO-loaded nanolipogel compared to the unmedicated nanolipogel, the TTO-loaded conventional gel, and the normal saline (control). The measurement of burn contraction proved that TTO-loaded nanolipogel exhibited a significantly accelerated skin healing, this was confirmed by histopathological examination as well as quantitative assessment of inflammatory infiltrate. This study highlighted the success of the proposed nanotechnology approach in improving the efficacy of TTO used for the repair of skin damage induced by burns.

Crystallization and Rheology of Mono- and Diglycerides and Their Role in Stabilization of Emulsion Droplets in Model Topical Ointments

The crystallization behavior of commercial mono- and diglycerides (MDG) in paraffin oil is studied to develop an in-depth understanding of the polymorphic transitions useful for the physical stability of petroleum oil-based topical emulsions. Optical microscopy and differential scanning calorimetry measurements showed the formation of plate-like and spherulite crystals at high and low temperatures, in sequence, while cooling a solution of MDG dissolved in oil. High-resolution NMR and X-ray scattering demonstrate that 1-monoglycerides (mixture of 1-glyceride monostearate and 1-glyceride monopalmitate) cocrystallize to an inverse-lamellar structure (L_α polymorph) that mainly forms plate-like crystals at a higher temperature. The L_α polymorph is seen to exist up to room temperature during the cooling process. At lower temperatures, 1,3-diglycerides (mixture of 1,3-glyceryl distearate and 1,3-glyceryl dipalmitate) crystallize into β-polymorphs that form spherulites. The spherulites tend to assemble into elongated strands via aggregation, leading to the formation of a percolating network structure. The sizes of both types of crystals decrease with an increasing cooling rate, leading to a higher mechanical modulus due to the increased network connectivity of spherulites. In an emulsion, monoglycerides in the form of L_α polymorphs having plate-like crystal morphology show a higher affinity to the polar liquid/oil interface, thereby providing better interfacial stability compared to the spherulitic β-polymorphs. However, diglycerides in the form of spherulites form bulk network structures which provide network stabilization to the suspended droplets. This work demonstrates that MDG, a commercially available ingredient that combines the differential functionality of monoglycerides and diglycerides, is an effective, bifunctional, emulsifying agent for petrolatum-based topical emulsions.

Self-emulsifying drug delivery systems: a novel approach to deliver drugs

Self-emulsifying drug delivery systems (SEDDS) are a proven method for poorly soluble substances works by increasing the solubility and bioavailability. SEDDS and isotropic mixtures, are composed of oils, surfactants, and occasionally cosolvents. The ability of these formulations and methods to produce microemulsions or fine oil-in-water (o/w) emulsions after moderate stirring and dilution by water phase along the GI tract might be a promising technique for lipophilic agents with dissolution rate-limited absorption. This review provides an outline of SEDDS's numerous advances and biopharmaceutical elements, types, manufacturing, characterization, limitations, and future prospects. The evaluation of SEDDS and its applications are also discussed, focusing on the advances of SEDDS's solid self-emulsifying delivery mechanism and dosage form. By integrating suitable polymer into the formulation, SEDDS may be studied for the creation of a formulation with sustained drug release. This technology's improvement might lead to a new application in the field of medicine delivery. SEDDS has been demonstrated to be quite efficient in increasing oral bioavailability of lipophilic products. SEDDS is one of the promising methods for controlling the characteristics of medications that are not great choices for oral delivery. It is also worth mentioning that SEDDS may be made in variety of solid dosage forms that are acceptable for both oral and parenteral administration.