A Comprehensive Review of Patented Technologies to Fabricate Orodispersible Films: Proof of Patent Analysis (2000–2020)

Next-generation pharmaceuticals: the rise of sildenafil citrate ODF for the treatment of men with erectile dysfunction

Orodispersible film (ODF) is one of the novel formulations that disintegrate rapidly in the mouth without the requisite for water compared to other conventional oral solid dosage formulations. This delivery system serves as a convenient mode of administration, especially in patients who have dysphagia and fluid restriction, being beneficial to pediatric, geriatric, and bedridden patients. A novel sildenafil ODF containing sildenafil citrate is formulated to be used in patients with erectile dysfunction (ED). This review discusses the advantages of ODF in improving compliance and satisfaction in these patients and describes the manufacturing techniques, evaluation tests, bioequivalence, and stability studies of sildenafil ODF. This formulation offers unique benefit to patients with ED by improving their acceptance and compliance and respecting their privacy and the need for a discreet treatment. Moreover, the comparison of pharmacokinetic parameters between the sildenafil ODF administered with and without water and the conventional film-coated tablet were similar. It also demonstrated reliable performance that yielded a consistent product, meeting all specifications at release and after three weeks of storage under stressed conditions (60°C). Sildenafil ODF warrants improved ease of intake, taste, portability, storage, and compliance among ED patients, making it the potential most preferred formulation and drug of choice.

Assessment of Alginate Gel Films as the Orodispersible Dosage Form for Meloxicam

The aim of this study was to obtain films based on sodium alginate (SA) for disintegration in the oral cavity. The films were prepared with a solvent-casting method, and meloxicam (MLX) as the active ingredient was suspended in a 3% sodium alginate solution. Two different solid-dosage-form additives containing different disintegrating agents, i.e., VIVAPUR 112® (MCC; JRS Pharma, Rosenberg, Germany) and Prosolve EASYtabs SP® (MIX; JRS Pharma, Rosenberg, Germany), were used, and four different combinations of drying time and temperature were tested. The influence of the used disintegrant on the properties of the ODFs (orodispersible films) was investigated. The obtained films were studied for their appearance, elasticity, mass uniformity, water content, meloxicam content and, finally, disintegration time, which was studied using two different methods. The films obtained with the solvent-casting method were flexible and homogeneous in terms of MLX content. Elasticity was slightly better when MIX was used as a disintegrating agent. However, these samples also revealed worse uniformity and mechanical durability. It was concluded that the best properties of the films were achieved using the mildest drying conditions. The type of the disintegrating agent had no effect on the amount of water remaining in the film after drying. The water content depended on the drying conditions. The disintegration time was not affected by the disintegrant type, but some differences were observed when various drying conditions were applied. However, regardless of the formulation type and manufacturing conditions, the analyzed films could not be classified as fast disintegrating films, as the disintegration time exceeded 30 s in all of the tested formulations.

Orodispersible Films: Current Innovations and Emerging Trends

Orodispersible films (ODFs) are thin, mechanically strong, and flexible polymeric films that are designed to dissolve or disintegrate rapidly in the oral cavity for local and/or systemic drug delivery. This review examines various aspects of ODFs and their potential as a drug delivery system. Recent advancements, including the detailed exploration of formulation components, such as polymers and plasticizers, are briefed. The review highlights the versatility of preparation methods, particularly the solvent-casting production process, and novel 3D printing techniques that bring inherent flexibility. Three-dimensional printing technology not only diversifies active compounds but also enables a multilayer approach, effectively segregating incompatible drugs. The integration of nanoparticles into ODF formulations marks a significant breakthrough, thus enhancing the efficiency of oral drug delivery and broadening the scope of the drugs amenable to this route. This review also sheds light on the diverse in vitro evaluation methods utilized to characterize ODFs, ongoing clinical trials, approved marketed products, and recent patents, providing a comprehensive outlook of the evolving landscape of orodispersible drug delivery. Current patient-centric approaches involve developing ODFs with patient-friendly attributes, such as improved taste masking, ease of administration, and enhanced patient compliance, along with the personalization of ODF formulations to meet individual patient needs. Investigating novel functional excipients with the potential to enhance the permeation of high-molecular-weight polar drugs, fragile proteins, and oligonucleotides is crucial for rapid progress in the advancing domain of orodispersible drug delivery.

Comparison of Hydroxypropyl Methylcellulose and Alginate Gel Films with Meloxicam as Fast Orodispersible Drug Delivery

The aim of the study was the preparation and comparison of two types of orodispersible gel films (ODF) by the solvent casting method. Natural polymers: sodium alginate (ALG) or hydroxypropyl methylcellulose (HPMC) were used as the gel film formers, and Kollidon or microcrystalline cellulose was used as the disintegrant. Meloxicam (MLX), the drug used to treat rheumatic diseases for children and adults, was proposed as the active pharmaceutical ingredient (API). The influence of the polymer and disintegrant on the properties of ODF was investigated. The evaluation of prepared gel films was based on appearance description, mass uniformity measurement, disintegration time, API content, film wettability, and water content. Also, the dissolution test was prepared in a basket apparatus using artificial salvia (pH = 6.8) as the medium. The obtained API release profiles were analyzed for the similarity factors (f2) with the DDSolver software. The results showed that independently of the polymer or disintegrant, using the solvent casting method, gel films have a similar appearance and active substance content close to the theoretical value and water content of less than 10%. Only the type of polymer influences the release profiles of MLX. However, the disintegration time was longer than 30 s, which makes the films non-fast-dissolving drug delivery systems. This means that for the ODF system, further evaluation is required, and some changes in the composition of the film have to be done.

Emerging Strategies to Improve the Design and Manufacturing of Biocompatible Therapeutic Materials

Currently, the field of medicine is drastically advancing, mainly due to the progress in emerging areas such as nanomedicine, regenerative medicine, and personalized medicine. For example, the development of novel drug delivery systems in the form of nanoparticles is improving the liberation, absorption, distribution, metabolism, and excretion (LADME) properties of the derived formulations, with a consequent enhancement in the treatment efficacy, a reduction in the secondary effects, and an increase in compliance with the dosage guidelines. Additionally, the use of biocompatible scaffolds is translating into the possibility of regenerating biological tissues. Personalized medicine is also benefiting from the advantages offered by additive manufacturing. However, all these areas have in common the need to develop novel materials or composites that fulfill the requirements of each application. Therefore, the aim of this Special Issue was to identify novel materials/composites that have been developed with specific characteristics for the designed biomedical application.

Technological Aspects and Evaluation Methods for Polymer Matrices as Dental Drug Carriers

The development of polymer matrices as dental drug carriers takes into account the following technological aspects of the developed formulations: the composition and the technology used to manufacture them, which affect the properties of the carriers, as well as the testing methods for assessing their behavior at application sites. The first part of this paper characterizes the methods for fabricating dental drug carriers, i.e., the solvent-casting method (SCM), lyophilization method (LM), electrospinning (ES) and 3D printing (3DP), describing the selection of technological parameters and pointing out both the advantages of using the mentioned methods and their limitations. The second part of this paper describes testing methods to study the formulation properties, including their physical and chemical, pharmaceutical, biological and in vivo evaluation. Comprehensive in vitro evaluation of carrier properties permits optimization of formulation parameters to achieve prolonged retention time in the dynamic oral environment and is essential for explaining carrier behavior during clinical evaluation, consequently enabling the selection of the optimal formulation for oral application.

Orodispersible Films-Current State of the Art, Limitations, Advances and Future Perspectives

Orodispersible Films (ODFs) are drug delivery systems manufactured with a wide range of methods on a big scale or for customized medicines and small-scale pharmacy. Both ODFs and their fabrication methods have certain limitations. Many pharmaceutical companies and academic research centers across the world cooperate in order to cope with these issues and also to find new formulations for a wide array of APIs what could make their work profitable for them and beneficial for patients as well. The number of pending patent applications and granted patents with their innovative approaches makes the progress in the manufacturing of ODFs unquestionable. The number of commercially available ODFs is still growing. However, some of them were discontinued and are no longer available on the markets. This review aims to summarize currently marketed ODFs and those withdrawn from sale and also provides an insight into recently published studies concerning orodispersible films, emphasizing of utilized APIs. The work also highlights the attempts of scientific communities to overcome ODF's manufacturing methods limitations.

Orodispersible Film (ODF) Platform Based on Maltodextrin for Therapeutical Applications

Orodispersible film (ODF) is a new dosage form that disperses rapidly in the mouth without water or swallowing. The main ingredient of an ODF is a polymer that can be both of natural or synthetic origin. Maltodextrin is a natural polymer, mainly used in pharmaceutical and nutraceutical fields. This review aims to examine the literature regarding ODFs based on maltodextrin as the platform for developing new products for therapeutical application. ODFs based on maltodextrin contain plasticizers that enhance their flexibility and reduce their brittleness. Surfactants; fillers, such as homopolymer and copolymer of vinylacetate; flavour and sweetener were introduced to improve ODF characteristics. Both water-soluble and insoluble APIs were introduced up to 100 mg per dosage unit. The solvent casting method and hot-melt extrusion are the most useful techniques for preparing ODFs. In particular, the solvent casting method allows manufacturing processes to be developed from a lab scale to an industrial scale. ODFs based on maltodextrin are characterized in terms of mechanical properties, dissolution rate, taste and stability. ODFs made of maltodextrin, developed by IBSA, were tested in vivo to evaluate their bioequivalence and efficacy and were demonstrated to be a valid alternative to the marketed oral dosage forms.