Prunus armeniaca Gum-Alginate Polymeric Microspheres to Enhance the Bioavailability of Tramadol Hydrochloride: Formulation and Evaluation

Malatya apricot gum: A source of natural gum and its physicochemical, functional and antioxidant properties

Gums are commonly used in the food industry for their functional properties. However, the growing demand for sustainable and alternative sources has drawn attention to the need for identifying and characterizing non-conventional gum sources with comparable or enhanced features. This study aimed to investigate the exudate gum from apricot trees (Prunus armeniaca) in Malatya as a potential alternative. Since the composition and physicochemical properties of plant exudates can be affected by climate and growing region, our aim was to investigate the differences in the properties of the gum collected from Malatya apricot trees. The crude gum (CG) was purified (PG) and analyzed for its composition and properties. Approximate compositional analysis showed that CG consisted of 68.20 % carbohydrates, 2.23 % protein, 12.37 % moisture, and 4.37 % ash. These values, except for moisture content and fat, increased upon purification. The gum had a molecular weight of 5.55 × 105 Da, which remained unchanged upon purification. Galactose and arabinose were the main components of the sugar composition of the gum, with minor contributions from xylose and rhamnose, which showed variations in ratio after purification. Color metrics also indicated an increase in lightness (L*) and yellowness (b*) and a decrease in greenness (a*) after purification. The native pH of PG solution was found to be similar to that of CG and below 7 due to the presence of uronic acid residues in the gum structure, as confirmed by FTIR analysis. The total phenolic content was determined to be 1.14 mg GAE/g in CG and 1.17 mg GAE/g in PG, resulting in a higher antioxidant capacity for the latter. Purification also increased the content of dietary fibers from 1.61 % to 2.85 %. DSC analysis revealed that PG had higher thermal stability compared to CG. SEM images demonstrated that the gum particles were irregularly shaped, non-uniformly sized, and had rough and indented surfaces. Based on their Carr's index and Hausner ratio, both forms of apricot gum were classified as good flowable powders. These findings demonstrate the similarity of apricot gum to other tree exudates and highlight its potential as a new gum source. However, further studies are needed to determine its potential for industrial applications.

Armeniacae semen amarum: a review on its botany, phytochemistry, pharmacology, clinical application, toxicology and pharmacokinetics

Armeniacae semen amarum-seeds of Prunus armeniaca L. (Rosaceae) (ASA), also known as Kuxingren in Chinese, is a traditional Chinese herbal drug commonly used for lung disease and intestinal disorders. It has long been used to treat coughs and asthma, as well as to lubricate the colon and reduce constipation. ASA refers to the dried ripe seed of diverse species of Rosaceae and contains a variety of phytochemical components, including glycosides, organic acids, amino acids, flavonoids, terpenes, phytosterols, phenylpropanoids, and other components. Extensive data shows that ASA exhibits various pharmacological activities, such as anticancer activity, anti-oxidation, antimicrobial activity, anti-inflammation, protection of cardiovascular, neural, respiratory and digestive systems, antidiabetic effects, and protection of the liver and kidney, and other activities. In clinical practice, ASA can be used as a single drug or in combination with other traditional Chinese medicines, forming ASA-containing formulas, to treat various afflictions. However, it is important to consider the potential adverse reactions and pharmacokinetic properties of ASA during its clinical use. Overall, with various bioactive components, diversified pharmacological actions and potent efficacies, ASA is a promising drug that merits in-depth study on its functional mechanisms to facilitate its clinical application.

Formulation, Characterization, and Evaluation of β-Cyclodextrin Functionalized Hypericin Loaded Nanocarriers

St. John's wort in western Europe has been extensively utilized for the treatment of mild to moderate depression. Hypericin, a red pigment, is found to be responsible for its antidepressant activity. The aim of the current study was to prepare a nanoemulsion (O/W) of hypericin designed for immediate delivery of the drug to the brain for the treatment of depression. The nanoemulsion was prepared by means of a homogenization technique, and that was followed by its physicochemical evaluation. Tween-80, Span-80, β-cyclodextrin, ethanol, and eucalyptus oil were utilized for the manufacturing of the nanoemulsion. Morphological studies have revealed globular structures of nanosize that were confirmed by the zeta analysis. The consistency of particles was revealed by the low polydispersity values. pH values of all formulations lay within the range of nasal pH. The viscosity of the prepared formulations was affected by the increase in concentrations of β-cyclodextrin. After passing from the centrifugation and freeze-thaw studies, the prepared formulations showed good stability. Formulation F2 having a composition of oil phase (0.125 mL), aqueous phase (1.25 mL), and β-cyclodextrin (8%) showed the best results out of all the formulations, and F2 had a pH of 5.7, 5.35 cP viscosity, 1.332 refractive index, 148.8 globule size, and -10.8 zeta potential. The mean percentage drug release and in vitro and ex vivo percentage drug permeations were observed to be 71.75, 76, and 75.07%, respectively. Meanwhile, formulation F2 showed the maximum drug release and permeation. In vivo behavior studies including the open field test, elevated plus maze test, and tail suspension test were conducted to see the antidepressant effect of hypericin along with comparison with a commercially available treatment. In conclusion, the prepared formulation shows good efficacy as an antidepressant and can be considered as a natural alternative over synthetic drugs.

A novel pH-responsive hydrogel system based on Prunus armeniaca gum and acrylic acid: Preparation and evaluation as a potential candidate for controlled drug delivery

pH-responsive hydrogels have become effective and attractive materials for the controlled release of drugs at pre-determined destinations. In the present study, a novel hydrogel system based on Prunus armeniaca gum (PAG) and acrylic acid (AA) was prepared by a free radical mechanism using N, N-methylene bisacrylamide (MBA) as cross-linker and potassium persulfate (KPS) as initiator. A series of hydrogels varying PAG, AA, and MBA concentration was developed to determine the impact of these components. Formulated hydrogels were characterized for pH-responsive swelling, drug release, gel content, and porosity. Structural analysis was performed by FTIR, XRD, and SEM analysis. TGA study was applied to assess thermal stability. Oral acute toxicity and in vivo drug release were performed in rabbits. Hydrogels exhibited pH-dependent swelling and drug release. Swelling, drug loading and release, and porosity increased by increasing PAG and AA concentration while decreased by increasing MBA. The gel content of formulations was increased by increasing all three components. FTIR studies confirmed the development of copolymeric networks and the loading of drug. XRD studies revealed that hydrogels were amorphous, and the crystalline drug was changed into an amorphous form during loading. TGA results indicated that hydrogels were stable up to 600 °C. Acute oral toxicity results confirm that hydrogels were nontoxic up to a dose of 2 g/kg body weight in rabbits. The pharmacokinetic evaluation revealed that hydrogels prolonged the availability of the drug and the peak plasma concentration of the drug was obtained in 6 h as compared to the oral solution of the drug. Tramadol hydrochloride (THC) was used as a model drug. Hence, pH-responsive swelling and release, nontoxic nature and improved pharmacokinetics support that PAG-based hydrogels may be considered as potential controlled-release polymeric carriers.

Mimosa pudica mucilage nanoparticles of losartan potassium: Characterization and pharmacodynamics evaluation

The current research was to develop nanoparticles based on Mimosa pudica mucilage (MPM) that could encapsulate losartan potassium (LP). Nanoparticles (NPs) produced through ionic-gelation method; the polymerization of the mucilage carried out using calcium chloride as cross-linking agent. The MPMLP-NPs demonstrated vastly enhanced pharmaceutical characteristics, presented discrete surface with spherical shape of 198.4-264.6 nm with PDI ranging 0.326-0.461 and entrapment efficiency was in the range of 80.65 ± 0.82-90.79 ± 0.96%. FTIR and DSC indicated the stability of drug during the formulation of nanoparticles. An acute oral toxicity investigation found no significant alterations in behavior and histopathology criteria. The MPMLP-NPs formulation revealed the better rates and sustained effect as assessed with the commercial product. Moreover, low dose of MPMLP-NPs showed similar anti-hypertensive effect as assessed with the marketed tablet.

Maximizing the extraction yield of plant gum exudate using response surface methodology and artificial neural networking and pharmacological characterization

Prunus armeniaca gum is used as food additive and ethno medicinal purpose. Two empirical models response surface methodology and artificial neural network were used to search for optimized extraction parameters for gum extraction. A four-factor design was implemented for optimization of extraction process for maximum yield which was obtained under the optimized extraction parameter (temperature, pH, extraction time, and gum/water ratio). Micro and macro-elemental composition of gum was determined by using laser induced breakdown spectroscopy. Gum was evaluated for toxicological effect and pharmacological properties. The maximum predicted yield obtained by response surface methodology and artificial neural network was 30.44 and 30.70% which was very close to maximum experimental yield 30.23%. Laser induced breakdown spectroscopic spectra confirmed the presence Calcium, Potassium, Magnesium, Sodium, Lithium, Carbon, Hydrogen, Nitrogen and Oxygen. Acute oral toxicity study showed that gum is non-toxic up to 2000 mg/Kg body weight in rabbits, accompanied by high cytotoxic effects of gum against HepG2 and MCF-7cells by MTT assay. Overall, Aqueous solution of gum showed various pharmacological activities with significant value of antioxidant, antibacterial, anti-nociceptive, anti-cancer, anti-inflammatory and thrombolytic activities. Thus, optimization of parameters using mathematical models cans offer better prediction and estimations with enhanced pharmacological properties of extracted components.

Application of Biomedical Microspheres in Wound Healing

Tissue injury, one of the most common traumatic injuries in daily life, easily leads to secondary wound infections. To promote wound healing and reduce scarring, various kinds of wound dressings, such as gauze, bandages, sponges, patches, and microspheres, have been developed for wound healing. Among them, microsphere-based tissue dressings have attracted increasing attention due to the advantage of easy to fabricate, excellent physicochemical performance and superior drug release ability. In this review, we first introduced the common methods for microspheres preparation, such as emulsification-solvent method, electrospray method, microfluidic technology as well as phase separation methods. Next, we summarized the common biomaterials for the fabrication of the microspheres including natural polymers and synthetic polymers. Then, we presented the application of the various microspheres from different processing methods in wound healing and other applications. Finally, we analyzed the limitations and discussed the future development direction of microspheres in the future.

Formulation, Statistical Optimization, and In Vivo Pharmacodynamics of Cydonia oblonga Mucilage/Alginate Mucoadhesive Microspheres for the Delivery of Metformin HCl

In recent years, attention has shifted toward the utilization of natural polymers for encapsulation and sustained release of health-hazardous drugs. The purpose of this work is to define and assess the sustained delivery potential and mucoadhesive potential of a Cydonia oblonga mucilage (COM) and sodium alginate (Na-Alg)-constituting polymeric delivery carrier of antidiabetic drugs with a specific end goal to retain metformin HCl in the stomach while expanding the drug's bioavailability. Metformin HCl was encapsulated in mucoadhesive microspheres by an ionic gelation method. Polymers with different combinations were tried, and the resulting mucoadhesive COM/Na-Alg microspheres were assessed for particle size (mm) PS/Y₁, drug encapsulation efficiency DEE (%)/Y₂, and in vitro percentage cumulative drug release R_12h/Y₃ using Drug Design Expert software version 10. The response surface methodology by a 3²-central composite design predicted optimal synthesis parameters for the microspheres to be 295 mg for COM and 219 mg for Na-Alg. An optimized formulation was prepared under these conditions and used to evaluate the micrometric properties, morphology and structural characteristics, swelling behavior, in vitro drug release, and kinetics. Acute toxicity studies were carried out on blank COM/Na-Alg microspheres to deem them safe for in vivo studies. The DEE (%) was calculated to be 85.8 ± 1.67, whereas scanning electron microscopy (SEM) showed a coarse surface with characteristic wrinkles and cracks with an optical microscopic particle size of 0.96 ± 2.45. The ex vivo tests showed great mucoadhesive properties and good swelling behavior with pH-responsive drug release and a significant reduction in in vivo blood glucose levels. The results advocated the use of optimized microspheres to enhance the bioactivity with a possible dose reduction, making it less symptomatic, reducing the expense of the treatment, and subsequently facilitating better patient compliance.