Chitosan as a Functional Carrier for the Local Delivery Anti-Inflammatory Systems Containing Scutellariae baicalensis radix Extract

Azithromycin-Loaded Nanoparticles Incorporated in Chitosan-Based Soft Hydrogels: A Novel Approach for Dental Drug Delivery

Background: Azithromycin (AZC), a BCS class II/IV antibiotic with broad-spectrum antimicrobial activity, has poor water solubility, limiting its formulation potential. This study aimed to develop and optimize AZC-based soft hydrogels for the first time for improved solubility, local controlled drug release, and local dental applications. Methods: AZC nanoparticles (based on polyvinylpyrrolidone) were synthesized via electrospinning enhanced solubility 40-fold. These were incorporated into chitosan (CS) hydrogels with varying concentrations and degrees of deacetylation (DDA), optimized using a factorial design. Hydrogels were characterized for drug release, mucoadhesion, antioxidant, anti-inflammatory, and antimicrobial properties, with Principal Component Analysis (PCA) assessing correlations. Results: Soft hydrogels with 3% CS and 80% DDA achieved sustained drug release (62.9-94.7% over 48 h), strong mucoadhesion, and enhanced biological activity. Higher CS and DDA improved antioxidant and anti-inflammatory effects due to increased free amino groups. Antimicrobial tests showed efficacy against Streptococcus mutans and Staphylococcus aureus. PCA revealed an inverse correlation between AZC release and mucoadhesion and positive correlations between release and anti-inflammatory activity. Conclusions: AZC-based soft hydrogels significantly improved solubility, controlled release, and biological activity, showing strong potential for dental drug delivery. Further clinical validation and optimization are recommended.

Chitosan, a Natural Polymer, is an Excellent Sustained-Release Carrier for Amide Local Anesthetics

Local anesthetics, particularly amide types, play a crucial role in perioperative anesthesia to alleviate pain and manage chronic, long-term pain, with their brief effect period remaining a universal challenge that needs resolution. There is a high anticipation for creating materials that maintain prolonged effectiveness of local anesthetics through a straightforward administration technique. Chitosan is the most typical natural amino polymer, which is highly reactive and easy to modify. It has been widely and deeply used in the field of medicine. At present, it is mainly used in tissue regeneration and repair, hemostasis and wound healing, antibacterial and anti-infection, disease diagnosis and treatment detection, and drug delivery. In the field of anesthesia, chitosan is regarded as a potential perfect carrier for the sustained release of amide local anesthetics. This document aims to analyze the current application of chitosan as a prolonged-release substance in amide-type local anesthetics, encapsulate the associated research advancements, and subsequently investigate the practicality and prospects of its medical uses.

Implementing the Design of Experiments (DoE) Concept into the Development of Mucoadhesive Tablets Containing Orange Peel Extract as a Potential Concept for the Treatment of Oral Infections

This study explores for the first time the impact of chitosan (CS) with varying molecular weights (MW), orange peel extract concentration, and hydroxypropyl methylcellulose (HPMC) content on the formulation of buccal tablets for treating oral infections. Utilizing a statistical design of experiments (DoE), nine different formulations were evaluated for mechanical properties, dissolution behavior, mucoadhesion, and biological activity. A formulation with high CS MW, 60% orange peel extract, and 8% HPMC, emerged as the optimal formulation, demonstrating superior tabletability, compressibility, and compactibility. Dissolution studies indicated that hesperidin release followed the Higuchi model, with higher extract content enhancing this phenomenon. Mucoadhesion improved with increased HPMC and CS concentrations, although higher extract content reduced bioadhesion. Biological assays showed that higher extract levels boosted antioxidant activity, while CS primarily contributed to anti-inflammatory effects. The optimized formulation exhibited broad antimicrobial activity against key oral pathogens, surpassing the effectiveness of the individual components. Principal component analysis (PCA) further confirmed the significant influence of extract content on tablet properties. These findings suggest that the optimized tablet formulation holds promise for effective buccal delivery in the treatment of oral infections, warranting further investigation in clinical settings.

Functionalized magnetic nanomaterials as recyclable adsorbents for efficient flavonoid enrichment in Scutellaria Radix

A magnetic composite (Fe3O4@SiO2@PNIPAM-co-NHMA) with high adsorption capacity and recoverability was developed for the enrichment and determination of flavonoids in Scutellaria Radix (SR). A magnetic solid-phase extraction (MSPE) technique using Fe3O4@SiO2@PNIPAM-co-NHMA absorbent in combination with high-performance liquid chromatography (HPLC) was developed for selectively enrichment and determination of the biologically active flavonoids in the aqueous extract of SR, including baicalein, baicalin, wogonoside and wogonin. Under the optimized experimental conditions, the magnetic adsorbent could adsorb up to 77.0 ± 0.98 % - 98.15 ± 0.15 % of four representative flavonoids from SR, with elution rates varying from 55.10 ± 0.25 % to 91.94 ± 1.85 %. The limits of detection (LOD) and limits of quantitation (LOQ) were 0.01-0.35 μg/mL and 0.03-0.98 μg/mL, respectively. In addition, it remained effective after six replicates, demonstrating its potential as a recoverable adsorbent for enriching flavonoids in traditional Chinese medicine.

Electrospun Nanofibers with Pomegranate Peel Extract as a New Concept for Treating Oral Infections

Pomegranate peel extract is known for its potent antibacterial, antiviral, antioxidant, anti-inflammatory, wound healing, and probiotic properties, leading to its use in treating oral infections. In the first stage of this work, for the first time, using the Design of Experiment (DoE) approach, pomegranate peel extract (70% methanol, temperature 70 °C, and three cycles per 90 min) was optimized and obtained, which showed optimal antioxidant and anti-inflammatory properties. The optimized extract showed antibacterial activity against oral pathogenic bacteria. The second part of this study focused on optimizing an electrospinning process for a combination of polycaprolactone (PCL) and polyvinylpyrrolidone (PVP) nanofibers loaded with the optimized pomegranate peel extract. The characterization of the nanofibers was confirmed by using SEM pictures, XRPD diffractograms, and IR-ATR spectra. The composition of the nanofibers can control the release; in the case of PVP-based nanofibers, immediate release was achieved within 30 min, while in the case of PCL/PVP, controlled release was completed within 24 h. Analysis of the effect of different scaffold compositions of the obtained electrofibers showed that those based on PCL/PVP had better wound healing potential. The proposed strategy to produce electrospun nanofibers with pomegranate peel extract is the first and innovative approach to better use the synergy of biological action of active compounds present in extracts in a patient-friendly pharmaceutical form, beneficial for treating oral infections.

Chitosan/Pomegranate Seed Oil Emulgel Composition as a New Strategy for Dermal Delivery of Hydrocortisone

Multifunctional delivery systems capable of modulating drug release and exerting adjunctive pharmacological activity have attracted particular attention. Chitosan (CS) and pomegranate seed oil (PO) appear to be attractive bioactive components framing the strategy of complex therapy and multifunctional drug carriers. This research is aimed at evaluating the potential of CS in combination with PO in studies on topical emulgels containing hydrocortisone as a model anti-inflammatory agent. Its particular goal was to distinguish alterations in anti-inflammatory action followed with drug dissolution or penetrative behavior between the designed formulations that differ in CS/PO weight ratio. All formulations favored hydrocortisone release with up to a two-fold increase in the drug dissolution rate within first 5 h as compared to conventional topical preparations. The clear effect of CS/PO on the emulgel biological performance was observed, and CS was found to be prerequisite for the modulation of hydrocortisone absorption and accumulation. In turn, a greater amount of PO played the predominant role in the inhibition of hyaluronidase activity and enhanced the anti-inflammatory effect of preparation E-3. Emulgels showed a negligible reduction in mouse fibroblasts' L929 cell viability, confirming their non-irritancy with skin cells. Overall, the designed formulation with a CS/PO ratio of 6:4 appeared to be the most promising topical carrier for the effective treatment of inflammatory skin diseases among the tested subjects.

Anti-Aging Properties of Chitosan-Based Hydrogels Rich in Bilberry Fruit Extract

Photoaging is a process related to an increased level of reactive oxygen species (ROS). Polyphenols can scavenge free radicals in the body, which can delay skin aging. Therefore, our work aimed to prepare a biologically active extract from dry fruits of Vaccinium myrtillus or Vaccinium corymbosum and use it for the preparation of hydrogels for topical application. Therefore, eight different extracts (using V. myrtillus and V. corymbosum and different extraction mixtures: methanol, methanol-water 1:1, water, acetone-water 1:1) were prepared and their phytochemical (total polyphenolic content, total flavonoid content, total anthocyanin content) and biological properties (antioxidant, anti-hyaluronidase, and anti-tyrosinase activity) were assessed. Cytotoxicity towards HaCaT keratinocytes was also determined. Based on the results, the acetone-water extract from V. myrtillus was selected for further study. Using the Design of Experiments approach, chitosan-based hydrogels with bilberry fruit extract were prepared. The content of extract and chitosan were selected as independent factors. The activity of hydrogels depended on the extract content; however, the enzyme-inhibiting (anti-hyaluronidase and anti-tyrosinase) activity resulted from the presence of both the extract and chitosan. Increased concentration of chitosan in the hydrogel base led to increased viscosity of the hydrogel and, consequently, a slower release of active compounds. To get optimal hydrogel characteristics, 1% extract and 2.5% MMW chitosan were utilized. The research suggests the validity of using bilberry fruit extracts in topical preparations with anti-aging properties.

Covalent Conjugates of Allylbenzenes and Terpenoids as Antibiotics Enhancers with the Function of Prolonged Action

The drug resistance of pathogenic bacteria is often due efflux pumps-specific proteins that remove foreign compounds from bacterial cells. To overcome drug resistance, adjuvants are often used that can inhibit efflux pumps or other systems that ensure the resistance of bacteria to the action of antibiotics. We assumed that a new level of effectiveness with the use of an antibiotic + an adjuvant pair could be achieved by their joint delivery into the pathogen. To test this hypothesis, we constructed a series of molecular carriers based on poly-(olygo-, dendry)mers based on cyclodextrin-grafted PEI or mannan, as well as glycol chitosan, covalently bound to antibiotic, adjuvant, and the oligosaccharide ligand to the macrophage mannose receptor (CD206), which we studied earlier and showed high efficiency and selectivity of delivery of a therapeutic "cargo" to macrophages. Moxifloxacin was used as an antibiotic, and terpenoid and allylbenzene compounds were used as adjuvants, for which we previously discovered the ability to inhibit bacterial efflux pumps. We show that: (a) the resulting structures were stable in vitro for a long time (up to 10 days); (b) they were adsorbed on bacterial cells, providing a local increase in the concentration of the antibiotic and adjuvant in pathogen cells; (c) they were internalized by bacterial cells, ensuring the accumulation of both antibiotic and adjuvant inside bacterial cells; (d) the adjuvant, after entering the bacterial cell, provided inhibition of the efflux pumps; (e) due to this action of the adjuvant, combined with the targeted delivery by the carrier, the antibiotic's half-life in rats increased by more than 2 times, the effective concentration of the drug in the blood plasma (AUC) increased up to 8-10 times; (f) a significant increase in the effectiveness of the antibacterial action against Gram+ and Gram- cells was achieved (up to 3 times). Potentially, such an approach would significantly increase the effectiveness of therapies for a number of infectious and other diseases, reduce the dosage of antibiotics, shorten the duration of treatment, and reduce the risk of developing bacterial resistance. Moreover, the use of a polymer carrier with covalently bound organic molecules of different structures will avoid problems linked to different (suboptimal) solubility and bio-distribution of the administered molecules, which would be almost inevitable when using the same compounds separately. It would be very difficult to find antibiotic/adjuvant pairs that simultaneously achieve optimal concentrations in the same target cells. In our case, terpenoids and alkylbenzenes used as adjuvants are practically insoluble as individual compounds, and their unacceptable pharmacological properties would not allow them to be used as efflux pump inhibitors.

Hot Melt Extrusion as an Effective Process in the Development of Mucoadhesive Tablets Containing Scutellariae baicalensis radix Extract and Chitosan Dedicated to the Treatment of Oral Infections

Hot Melt Extrusion (HME) technology was developed to obtain blends containing lyophilized Scutellariae baicalensis root extract and chitosan in order to improve the rheological properties of the obtained blends, including tableting and compressibility properties. (Hydroxypropyl)methyl cellulose (HPMC) in 3 different ratios was used as amorphous matrix formers. The systems were characterized using X-ray powder diffraction (PXRD), Fourier Transform Infrared Spectroscopy with Attenuated Total Reflectance (FTIR-ATR), and in vitro release, permeability, and microbiological activity studies. Then, the extrudates were used to prepare tablets in order to give them the appropriate pharmaceutical form. HPMC-based systems released baicalin more slowly, resulting in delayed peaks in the acceptor fluid. This behavior can be explained by the fact that HPMC swells significantly, and the dissolved substance must have diffused through the polymer network before being released. The best tabletability properties are provided by the formulation containing the extrudate with lyophilized extract HPMC 50:50 w/w. These tablets offer a valuable baicalin release profile while maintaining good mucoadhesive properties that condition the tablet’s retention in the application site and the effectiveness of therapy.