Modification of Whey Proteins by Sonication and Hydrolysis for the Emulsification and Spray Drying Encapsulation of Grape Seed Oil

Optimizing Encapsulation: Comparative Analysis of Spray-Drying and Freeze-Drying for Sustainable Recovery of Bioactive Compounds from Citrus x paradisi L. Peels

Spray-drying and freeze-drying are indispensable techniques for microencapsulating biologically active compounds, crucial for enhancing their bioavailability and stability while protecting them from environmental degradation. This study evaluates the effectiveness of these methods in encapsulating Citrus x paradisi L. (grapefruit) peel extract, focusing on sustainable recovery from waste peels. Key objectives included identifying optimal wall materials and assessing each encapsulation technique's impact on microencapsulation. The investigation highlighted that the choice of wall material composition significantly affects the microencapsulation's efficiency and morphological characteristics. A wall material mixture of 17 g maltodextrin, 0.5 g carboxymethylcellulose, and 2.5 g β-cyclodextrin was optimal for spray drying. This combination resulted in a sample with a wettability time of 1170 (s), a high encapsulation efficiency of 91.41%, a solubility of 60.21%, and a low moisture content of 5.1 ± 0.255%. These properties indicate that spray-drying, particularly with this specific wall material composition, offers a durable structure and can be conducive to prolonged release. Conversely, varying the precise compositions used in the freeze-drying process yielded different results: quick wettability at 132.6 (s), a solubility profile of 61.58%, a moisture content of 5.07%, and a high encapsulation efficiency of 78.38%. The use of the lyophilization technique with this latter wall material formula resulted in a more porous structure, which may facilitate a more immediate release of encapsulated compounds and lower encapsulation efficiency.

Enhancing Encapsulation Efficiency of Chavir Essential Oil via Enzymatic Hydrolysis and Ultrasonication of Whey Protein Concentrate-Maltodextrin

This study focused on the characterization of emulsions and microparticles encapsulating Chavir essential oil (EO) by application of modified whey protein concentrate-maltodextrin (WPC-MD). Different physical, chemical, morphological, thermal, and antioxidant properties and release behavior of spray-dried microparticles were assessed. Antioxidant, solubility, emulsifying, and foaming activities of modified WPC were increased compared to those of primary material. The results indicated that the particle size distribution varied depending on the type of carriers used, with the smallest particles formed by hydrolyzed WPC (HWPC). Binary blends of modified WPC-MD led to improved particle sizes. The spray-drying yield ranged from 64.1% to 85.0%, with higher yields observed for blends of MD with sonicated WPC (UWPC). Microparticles prepared from primary WPC showed irregular and wrinkled surfaces with indentations and pores, indicating a less uniform morphology. The UWPC as a wall material led to microparticles with increased small cracks and holes on their surface. However, HWPC negatively affected the integrity of the microparticles, resulting in broken particles with irregular shapes and surface cracks, indicating poor microcapsule formation. Encapsulating EO using WPC-MD increased the thermal stability of EO significantly, enhancing the degradation temperature of EO by 2 to 2.5-fold. The application of primary WPC (alone or in combination with MD) as wall materials produced particles with the lowest antioxidant properties because the EO cannot migrate to the surface of the particles. Enzymatic hydrolysis of WPC negatively impacted microparticle integrity, potentially increasing EO release. These findings underscore the crucial role of wall materials in shaping the physical, morphological, thermal, antioxidant, and release properties of spray-dried microparticles, offering valuable insights for microencapsulation techniques.

Rice proteins: A review of their extraction, modification techniques and applications

Rice protein is highly nutritious and easy to digest and absorb. Its hydrolyzed peptides have significant effects on lowering blood pressure and cholesterol. First, a detailed and comprehensive explanation of rice protein extraction methods was given, and it was found that the combination of enzymatic and physical methods could improve the extraction rate of rice protein, but it was only suitable for laboratory studies. Second, the methods for improving the functional properties of rice protein were introduced, including physical modification, chemical modification, and enzymatic modification. Enzymatic modification of the solubility of rice protein to improve its functional properties has certain limitations due to the low degree of hydrolysis, the long time required, the low utilization of the enzyme, and the possible undesirable taste of the product. Finally, the development and utilization of rice protein was summarized and the future research direction was suggested. This paper lists the advantages and disadvantages of various extraction techniques, points out the shortcomings of existing extraction techniques, aims to fill the gap in the field of rice protein extraction, and then provides a possible improvement method for the extraction and development of rice protein in the future.

Improved encapsulation effect and structural properties of whey protein isolate by dielectric barrier discharge cold plasma

The whey protein isolate (WPI) was modified by dielectric barrier discharge cold plasma (DBD) in order to improve its encapsulation efficiency of rutin. In this work, the effect of DBD treatment on structure and physicochemical properties of WPI and the interaction between DBD-treated WPI and rutin were investigated. The results showed that the structural change of WPI leaded to the exposure of internal hydrophobic groups, increasing the interaction site with rutin. The encapsulation efficiency of DBD-treated WPI (30 kV, 30 s) on rutin was improved by 12.42 % compared with control group. The results of multispectral analysis showed that static quenching occurred in the process of interaction between DBD-treated and rutin, hydrogen bond and van der Waals force were the main forces between them. Therefore, DBD treatment can be used as a method to improve the encapsulation efficiency of WPI on hydrophobic active substances.

Modifications of whey proteins for emulsion based applications: Current status, issues and prospectives

Whey proteins are a major group of dairy proteins with high potential for various food based applications. Whey protein isolate has a limited range of functionalities. This functional range can be expanded using diverse modification methods to suit specific applications. This review summarizes the recent advances in the modifications of whey proteins using chemical, physical, and enzymatic methods and their combinations as well as the modification effects on the physicochemical properties. The uses of these modified whey proteins in emulsion based food and beverage systems are described. The limitations in the studies summarized are critically discussed, while future research directions are suggested on how to better utilize whey proteins for emulsion based uses through modifications.

Physicochemical characteristics and antioxidant stability of spray-dried soy peptide fractions

The direct addition of health-promoting peptides to food products is limited due to their physicochemical instability and bitter taste as well as their bio-functionality may be influenced by M_W. In this study, SPI hydrolysate (SPIH) was Alcalase-prepared, size-fractionated (<10, 10-30, and 30-100 kD), and the amino acid composition of peptide fractions determined. The physicochemical properties, morphology, and antioxidant stability of the fractions were also investigated after spray-drying encapsulation in maltodextrin-WPC carrier. The two low M_W peptide fractions (especially, PF < 10) were more active than intact SPI, SPIH, and high M_W peptide fraction in scavenging free radicals and chelating transition metal ions. As compared to the particles containing SPIH, those containing the smallest peptide fraction (PF < 10) had higher solubility and hygroscopicity, lower production yield and wettability, and more wrinkles, indentations and surface roughness. The highest antioxidant stability during spray-drying was observed for the two low M_W peptide fractions, which examined by scavenging of free radicals of DPPH (88%), ABTS (97%), OH (93%) and NO (80%), chelating of iron (88%) and copper (87-90%) ions, reducing power (93%), and total antioxidant activity (90%). This finding reflects more structural and biological stability of the low M_W fractions to shear stress and dehydration during spray-drying, as compared with SPIH. The spray-drying encapsulated soy peptide fractions may be used as nutraceuticals for the development of functional foods.