Microwave-Treated Physically Cross-Linked Sodium Alginate and Sodium Carboxymethyl Cellulose Blend Polymer Film for Open Incision Wound Healing in Diabetic Animals-A Novel Perspective for Skin Tissue Regeneration Application

Copper ions induces ferroptosis in Staphylococcus aureus and promotes healing of MRSA-induced wound infections

The emergence of multidrug-resistant bacteria, particularly methicillin-resistant Staphylococcus aureus (MRSA), poses a significant threat to public health, necessitating new antimicrobial strategies. Here, we demonstrate that low doses of copper sulfate (CuSO4) exhibit potent bactericidal effects against both S. aureus and MRSA by inducing ferroptosis. CuSO4 treatment causes bacterial cell membrane perforation, increases intracellular free copper (Cu+) and ferrous ions (Fe2+), elevates reactive oxygen species (ROS) production and lipid peroxidation, and triggers the intracellular Fenton reaction. The use of ROS scavengers, copper chelators, iron chelators, and iron oxidase inhibitors attenuated ROS levels and lipid peroxidation, reducing Cu2+-mediated cell death, confirming the role of ferroptosis. Proteomic analysis revealed that Cu2+ enhances the expression of Fur protein, mediates iron release from intracellular stores, and inhibits glutathione biosynthesis. Furthermore, we developed a sodium alginate hydrogel loaded with CuSO4 (Cu-SA), which significantly improved wound healing and reduced inflammation and organ damage in an MRSA-infected mouse skin model. Our findings suggest that Cu2+-induced ferroptosis offers a promising alternative to traditional antibiotics for treating MRSA infections, providing a novel strategy to combat antibiotic resistance in S. aureus.

Cellulose-based hydrogels enhanced with bioactive molecules for optimal chronic diabetic wound management

Hydrogels are three-dimensional structures that replicate natural tissues' extracellular matrix (ECM). They are essential for transporting exudates, gases, and moisture and facilitating cellular interactions in tissue engineering and wound healing. The choice of primary material in designing the scaffold is necessary to be paid more attention rather than common sources, including plant fibres like cotton, bamboo, and algae, as well as bacterial and marine-derived materials. Among them, cellulose-based polymers are especially valued for their biocompatibility and ability to promote wound healing. Chronic diabetic wounds pose unique treatment challenges, such as necrosis and infection risks. Consequently, a growing interest is in incorporating bioactive molecules into cellulose-based hydrogels. This article investigates how these infused hydrogels enhance the healing process in chronic diabetic wounds, examining various loading and crosslinking techniques alongside their clinical applications. It also discusses the benefits and limitations of bioactive molecules and their interactions with hydrogels to improve treatment strategies.

Advancement of Nanomaterials- and Biomaterials-Based Technologies for Wound Healing and Tissue Regenerative Applications

Patients and healthcare systems face significant social and financial challenges due to the increasing number of individuals with chronic external and internal wounds that fail to heal. The complexity of the healing process remains a serious health concern, despite the effectiveness of conventional wound dressings in promoting healing. Recent advancements in materials science and fabrication techniques have led to the development of innovative dressings that enhance wound healing. To further expedite the healing process, novel approaches such as nanoparticles, 3D-printed wound dressings, and biomolecule-infused dressings have emerged, along with cell-based methods. Additionally, gene therapy technologies are being harnessed to generate stem cell derivatives that are more functional, selective, and responsive than their natural counterparts. This review highlights the significant potential of biomaterials, nanoparticles, 3D bioprinting, and gene- and cell-based therapies in wound healing. However, it also underscores the necessity for further research to address the existing challenges and integrate these strategies into standard clinical practice.

Bioarchitectural Design of Bioactive Biopolymers: Structure-Function Paradigm for Diabetic Wound Healing

Chronic wounds such as diabetic ulcers are a major complication in diabetes caused by hyperglycemia, prolonged inflammation, high oxidative stress, and bacterial bioburden. Bioactive biopolymers have been found to have a biological response in wound tissue microenvironments and are used for developing advanced tissue engineering strategies to enhance wound healing. These biopolymers possess innate bioactivity and are biodegradable, with favourable mechanical properties. However, their bioactivity is highly dependent on their structural properties, which need to be carefully considered while developing wound healing strategies. Biopolymers such as alginate, chitosan, hyaluronic acid, and collagen have previously been used in wound healing solutions but the modulation of structural/physico-chemical properties for differential bioactivity have not been the prime focus. Factors such as molecular weight, degree of polymerization, amino acid sequences, and hierarchical structures can have a spectrum of immunomodulatory, anti-bacterial, and anti-oxidant properties that could determine the fate of the wound. The current narrative review addresses the structure-function relationship in bioactive biopolymers for promoting healing in chronic wounds with emphasis on diabetic ulcers. This review highlights the need for characterization of the biopolymers under research while designing biomaterials to maximize the inherent bioactive potency for better tissue regeneration outcomes, especially in the context of diabetic ulcers.

Bringing innovative wound care polymer materials to the market: Challenges, developments, and new trends

The development of innovative products for treating acute and chronic wounds has become a significant topic in healthcare, resulting in numerous products and innovations over time. The growing number of patients with comorbidities and chronic diseases, which may significantly alter, delay, or inhibit normal wound healing, has introduced considerable new challenges into the wound management scenario. Researchers in academia have quickly identified promising solutions, and many advanced wound healing materials have recently been designed; however, their successful translation to the market remains highly complex and unlikely without the contribution of industry experts. This review article condenses the main aspects of wound healing applications that will serve as a practical guide for researchers working in academia and industry devoted to designing, evaluating, validating, and translating polymer wound care materials to the market. The article highlights the current challenges in wound management, describes the state-of-the-art products already on the market and trending polymer materials, describes the regulation pathways for approval, discusses current wound healing models, and offers a perspective on new technologies that could soon reach consumers. We envision that this comprehensive review will significantly contribute to highlighting the importance of networking and exchanges between academia and healthcare companies. Only through the joint of these two actors, where innovation, manufacturing, regulatory insights, and financial resources act in harmony, can wound care products be developed efficiently to reach patients quickly and affordably.

Recent Advances in Long-Acting Drug Delivery and Formulations

Conventional immediate-release delivery systems are simple, industrially reproducible, acceptable, and easy-to-use by most patients [...].

TiB2-Derived Nanosheets Enhance the Tensile Strength and Controlled Drug Release of Biopolymeric Films Used in Wound Healing

Wound healing using an alginate-based biopolymeric film is one of the most preferred treatments. However, these films lack mechanical strength (elasticity and tensile strength), show higher initial burst release, and exhibit high vapor permeability. The present study reports the development of nanosheets derived from titanium diboride (10 nm) (NTB)-incorporated biopolymeric films (0.025, 0.05, and 0.1% w/v) using sodium alginate (SA) and carboxymethyl cellulose (CMC) to overcome the shortfalls. The surface properties of the film, nanosheet distribution within the film, and possible interactions with the film are explored by using scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), Fourier transform infrared (FTIR), and X-ray diffraction (XRD). These analyses confirm that nanosheets are uniformly distributed in the film and introduce unevenness on the film's surface. The tensile strength of the nanosheet-incorporated film (0.1% NTB film) using UTM is found to be 24.30 MPa (six times higher compared to the blank film), equivalent to human skin. The water vapor transmission rate of the film is also found to be in the desired range (i.e., 2000-2500 g/m2 day). The biocompatibility of the NTB film is confirmed by the MTT assay test using NIH/3T3 cells and HEK 293 cells. Furthermore, the scratch assay shows that the developed films promote cell migration and proliferation. The antibacterial activity of the film is also demonstrated using a model drug, tetracycline hydrochloride (TCl). Besides, the film exhibits the sustained release of TCl and follows the Korsmeyer-Peppas model for drug release. Overall, the 0.1% w/v NTB film is easy to fabricate, biocompatible and shows superior mechanical properties.

Characterization and Bio-Evaluation of the Synergistic Effect of Simvastatin and Folic Acid as Wound Dressings on the Healing Process

Wound healing is a significant healthcare problem that decreases the patient's quality of life. Hence, several agents and approaches have been widely used to help accelerate wound healing. The challenge is to search for a topical delivery system that could supply long-acting effects, accurate doses, and rapid healing activity. Topical forms of simvastatin (SMV) are beneficial in wound care. This study aimed to develop a novel topical chitosan-based platform of SMV with folic acid (FA) for wound healing. Moreover, the synergistic effect of combinations was determined in an excisional wound model in rats. The prepared SMV-FA-loaded films (SMV-FAPFs) were examined for their physicochemical characterizations and morphology. Box-Behnken Design and response surface methodology were used to evaluate the tensile strength and release characteristics of the prepared SMV-FAPFs. Additionally, Fourier transform infrared (FT-IR), differential scanning calorimetry (DSC), X-ray diffraction pattern (XRD), and animal studies were also investigated. The developed SMV-FAPFs showed a contraction of up to 80% decrease in the wound size after ten days. The results of the quantitative real-time polymerase chain reaction (RT-PCR) analysis demonstrated a significant upregulation of dermal collagen type I (CoTI) expression and downregulation of the inflammatory JAK3 expression in wounds treated with SMV-FAPFs when compared to control samples and individual drug treatments. In summary, it can be concluded that the utilization of SMV-FAPFs holds great potential for facilitating efficient and expeditious wound healing, hence presenting a feasible substitute for conventional topical administration methods.

Nanofiber Scaffolds as Drug Delivery Systems Promoting Wound Healing

Nanofiber scaffolds have emerged as a revolutionary drug delivery platform for promoting wound healing, due to their unique properties, including high surface area, interconnected porosity, excellent breathability, and moisture absorption, as well as their spatial structure which mimics the extracellular matrix. However, the use of nanofibers to achieve controlled drug loading and release still presents many challenges, with ongoing research still exploring how to load drugs onto nanofiber scaffolds without loss of activity and how to control their release in a specific spatiotemporal manner. This comprehensive study systematically reviews the applications and recent advances related to drug-laden nanofiber scaffolds for skin-wound management. First, we introduce commonly used methods for nanofiber preparation, including electrostatic spinning, sol-gel, molecular self-assembly, thermally induced phase separation, and 3D-printing techniques. Next, we summarize the polymers used in the preparation of nanofibers and drug delivery methods utilizing nanofiber scaffolds. We then review the application of drug-loaded nanofiber scaffolds for wound healing, considering the different stages of wound healing in which the drug acts. Finally, we briefly describe stimulus-responsive drug delivery schemes for nanofiber scaffolds, as well as other exciting drug delivery systems.

State of Innovation in Alginate-Based Materials

This review article presents past and current alginate-based materials in each application, showing the widest range of alginate's usage and development in the past and in recent years. The first segment emphasizes the unique characteristics of alginates and their origin. The second segment sets alginates according to their application based on their features and limitations. Alginate is a polysaccharide and generally occurs as water-soluble sodium alginate. It constitutes hydrophilic and anionic polysaccharides originally extracted from natural brown algae and bacteria. Due to its promising properties, such as gelling, moisture retention, and film-forming, it can be used in environmental protection, cosmetics, medicine, tissue engineering, and the food industry. The comparison of publications with alginate-based products in the field of environmental protection, medicine, food, and cosmetics in scientific articles showed that the greatest number was assigned to the environmental field (30,767) and medicine (24,279), whereas fewer publications were available in cosmetic (5692) and food industries (24,334). Data are provided from the Google Scholar database (including abstract, title, and keywords), accessed in May 2023. In this review, various materials based on alginate are described, showing detailed information on modified composites and their possible usage. Alginate's application in water remediation and its significant value are highlighted. In this study, existing knowledge is compared, and this paper concludes with its future prospects.

Polymer Gels: Classification and Recent Developments in Biomedical Applications

Polymer gels are a valuable class of polymeric materials that have recently attracted significant interest due to the exceptional properties such as versatility, soft-structure, flexibility and stimuli-responsive, biodegradability, and biocompatibility. Based on their properties, polymer gels can be used in a wide range of applications: food industry, agriculture, biomedical, and biosensors. The utilization of polymer gels in different medical and industrial applications requires a better understanding of the formation process, the factors which affect the gel's stability, and the structure-rheological properties relationship. The present review aims to give an overview of the polymer gels, the classification of polymer gels' materials to highlight their important features, and the recent development in biomedical applications. Several perspectives on future advancement of polymer hydrogel are offered.