Branched Polyurethanes Based on Synthetic Polyhydroxybutyrate with Tunable Structure and Properties

Perspectives and Limitations of Tartaric Acid Diamides as Phase Change Materials for Sustainable Heat Applications

Phase change materials (PCMs) with melting temperatures in the intermediate range (100-220 °C) have recently been in high demand for applications in solar and wind renewable energy storage. Such materials can help advance thermal battery technologies, e.g. Carnot batteries, that can reduce the amount of fossil fuels used to generate electricity, contributing to substantial savings in CO2 emissions. Recently, polyol esters have been recognized as robust PCMs with high stability and high energy storage density (up to 221 J g-1), additionally meeting sustainability and circularity criteria, being sourced from inexpensive, biorenewable tartaric acid (TA), which provides H-bonding, boosting the esters' thermal properties. However, the melting points of TA esters, which are below 100 °C, limit their suitability for applications in the intermediate temperature range. In this study, TA diamides are explored as candidates for thermal energy storage with improved melting temperatures ranging from 130 to 190 °C and melting enthalpies up to 173 J g-1. With the aid of differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and variable-temperature Fourier-transform infrared spectroscopy (FT-IR), various perspectives and limitations of designing TA-derived PCMs for sustainable heat use above 100 °C are investigated.

Mesoscale orchestration of collagen-based hierarchical mineralization

Mesoscale building blocks are instrumental in bridging multilevel hierarchical mineralization, endowing macroscale entities with remarkable functionality and mechanical properties. However, the mechanism orchestrating the homogeneous morphology of mesoscale mineralized motifs in collagen-based hard tissues remains unknown. Here, utilizing avian tendons as a mineralization model, we reveal a robust correlation between the mesoscale mineralized spherules and the presence of phosvitin. By designing a phosvitin-stabilized biomineral cluster medium, we replicate the well-defined mesoscale spherical structure within collagen matrix in vitro and ex vivo. In-depth studies reveal that phosvitin undergoes a conformational transition in the presence of biominerals at physiological concentrations, and self-assembles into mineral-dense amyloid-like aggregates. The spatial binding of these mineral-dense aggregates to collagen serves as a template for guiding the formation of mineralized spherules on the mesoscale. On the nanoscale, this binding facilitates mineral precursor release and diffusion into the fibrils for intrafibrillar mineralization. This discovery underscores the pivotal role of phosvitin-biomineral aggregates in templating hierarchical mineralization from the mesoscale to the nanoscale. This study not only elucidates the intricate mechanism underlying the collagen-based mineralization hierarchy but also promotes a cutting-edge advance in highly biomimetic material design and regenerative medicine.

Effect of ionic liquid as a surfactant in hydroxyapatite coatings for improvement corrosion resistance of Ti-6Al-4V substrates for implant applications

Research on hydroxyapatite (HAP) coatings for bone tissue applications has been investigated for decades due to their significant osteoconductive and bioactivity properties. HAP closely resembles the mineral component of human bone, making it ideal for biomedical applications such as implants. This study investigates the synthesis of hydroxyapatite nanoparticles (HAP-NPs) via the microemulsion method, which is essential for creating HAP coatings on the Ti-6Al-4V substrate. A variety of surfactants, including ionic liquid (IL; 2-hydroxyethyl ammonium octanoate ([HEA]OC)) and sodium lauryl sulfate (SLS), were employed to control the nucleation and crystal growth of HAP-NPs. The synthesized nanoparticles were dispersed in isopropanol and applied to the Ti-6Al-4V using the spin coating technique for creating HAP coatings. The samples were characterized using techniques such as FTIR, HNMR, XRD, FESEM, EDS, and AFM. Tafel and Electrochemical impedance spectroscopy (EIS) analyses were used to evaluate the corrosion resistance of the coatings in a simulated body fluid (SBF). The use of IL as a surfactant led to a significant reduction in nanoparticle size from 37.32 nm to 24.80 nm, which is critical for enhancing the coating's properties. Surface roughness decreased dramatically from 84.28 nm to 12.48 nm, indicating a smoother coating that can improve the adhesion strength of coatings. Electrochemical tests demonstrated improved corrosion resistance of coatings, with the charge transfer resistance (Rct) for the HAP-0.4 IL coating reaching 7.84 MΩ × cm2, compared to 0.11 MΩ × cm2 for the bare Ti-6Al-4V. [HEA]OC as a surfactant improved the protective quality and uniformity of the HAP-IL coatings and reduced the surface roughness. These results indicate that modifying the surface of Ti-6Al-4V with HAP-IL coatings is a promising approach for enhancing its performance in biomedical applications.

Spray dried polymyxin B liposome for inhalation against gram-negative bacteria

This study aimed to provide an alternative and effective delivery system to combat polymyxin B (PMB) toxicity and bacterial resistance through inhalation therapy. PMB was formulated as liposomal dry powder for inhalation using thin-film hydration and spray-dried methods. PMB formulations were characterized physically. The aerodynamic properties were determined using next-generation impactor (NGI). In vitro drug release was done in a phosphate buffer pH 7.4 for 2 h. Cytotoxicity was evaluated by the MTT cell viability assay. Antimicrobiological activities were done using bioassay and flow cytometry. Particle sizes of the spay-dried formulations were between 259.83 ± 9.91 and 518.73 ± 27.08 nm while the zeta potentials ranged between 3.07 ± 0.27 and 4.323 ± 0.36 mV. The Fourier-transform infrared spectroscopy shows no interaction between PMB and other excipients. Differential scanning calorimetry thermograms revealed amorphousness of the formulated powders and SEM revealed spherical PMB formulations. Similarly, mass media aerodynamic diameter results were 1.72-2.75 nm, and FPF was 25%-26%. The cumulative release of the PMB formulations was 90.3 ± 0.6% within 2 h. The killing kinetics revealed total cell death at 12 and 24 h for Pseudomonas aeruginosa and Escherichia coli, respectively. The PMB inhalation liposome showed better activity and was safe for lung-associated cell lines.

Influence of the Molecular Weight of the Polycarbonate Polyol on the Intrinsic Self-Healing at 20 °C of Polyurethanes

Different polyurethanes (PUs) were synthesized with polycarbonate polyols of molecular weights of 500, 1000, and 2000 Da. Their self-healing abilities at 20 °C were tested, and their structural, thermal, and mechanical properties were analyzed. The PUs made with polycarbonates of molecular weights 500 (YC500) and 1000 Da (YC1000) exhibited self-healing at 20 °C, and the self-healing time of YC1000 was the shortest. The absence of crystallinity and the low degree of micro-phase separation favored self-healing at 20 °C in YC500. However, the presence of tack and the existence of allophanate species and urethane-carbonate and urea-carbonate hydrogen bonds disfavored self-healing. Consequently, the self-healing time at 20 °C of YC500 was longer than expected. On the other hand, YC1000 exhibited an "equilibrium" between urethane-carbonate and urea-carbonate hydrogen bonds and carbonate-carbonate interactions among the soft segments, so a particular structural order was produced that was associated with its fastest self-healing at 20 °C. The PU made with the polycarbonate of molecular weight 2000 Da did not exhibit self-healing at 20 °C because of its significant micro-phase separation, the presence of semi-crystalline soft domains, and the lower density of hydrogen bonds.

Controllable Regulation of the Oxygen Redox Process in Lithium-Oxygen Batteries by High-Configuration-Entropy Spinel with an Asymmetric Octahedral Structure

Designing bifunctional electrocatalysts to boost oxygen redox reactions is critical for high-performance lithium-oxygen batteries (LOBs). In this work, high-entropy spinel (Co0.2Mn0.2Ni0.2Fe0.2Cr0.2)3O4 (HEOS) is fabricated by modulating the internal configuration entropy of spinel and studied as the oxygen electrode catalyst in LOBs. Under the high-entropy atomic environment, the Co-O octahedron in spinel undergoes asymmetric deformation, and the reconfiguration of the electron structure around the Co sites leads to the upward shift of the d-orbital centers of the Co sites toward the Fermi level, which is conducive to the strong adsorption of redox intermediate LiO2 on the surface of the HEOS, ultimately forming a layer of a highly dispersed Li2O2 thin film. Thin-film Li2O2 is beneficial for ion diffusion and electron transfer at the electrode-electrolyte interface, which makes the product easy to decompose during the charge process, ultimately accelerating the kinetics of oxygen redox reactions in LOBs. Based on the above advantages, HEOS-based LOBs deliver high discharge/charge capacity (12.61/11.72 mAh cm-2) and excellent cyclability (424 cycles). This work broadens the way for the design of cathode catalysts to improve oxygen redox kinetics in LOBs.

The Influence of an Isocyanate Structure on a Polyurethane Delivery System for 2'-Deoxycytidine-5'-monophosphate

The delivery of nucleosides represents an interesting research trend in recent years due to their application in various viral infections. The main aims of this study were to develop and to characterize polyurethane particles that are intended to be used for the transport of nucleosides. Three samples have been prepared using aliphatic diisocyanates, a mixture of polyethylene glycol, polycaprolactone, and diols, respectively. The samples were characterized through refractivity measurements, drug loading efficacy, release and penetration rate investigations, FTIR and Raman spectroscopy, thermal analyses, Zetasizer, SEM, HDFa cells viability, and irritation tests on mice skin. The results indicate the obtaining of particles with sizes between 132 and 190 nm, positive Zeta potential values (28.3-31.5 mV), and a refractivity index around 1.60. A good thermal stability was found, and SEM images show a medium tendency to agglomerate. The samples' color, pH, and electrical conductivity have changed only to a small extent over time, and the evaluations indicate an almost 70% encapsulation efficacy, a prolonged release, and that around 70% of particles have penetrated an artificial membrane in the first 24 h. The synthesized products should be tested in further clinical trials, and the current tests on cell cultures and mice skin revealed no side effects.

Stability and Antibiotic Potency Improvement of Levofloxacin by Producing New Salts with 2,6- and 3,5-Dihydroxybenzoic Acid and Their Comprehensive Structural Study

Recently, solid-state engineering has become a promising approach to improving the stability and potency of antibiotics. Levofloxacin (LF) is a broad-spectrum fluoroquinolone antibiotic marketed in solid and solution dosage forms. However, this substance forms solid hydrates under ambient conditions and degrades due to lighting, which may change its solid properties and dose. In addition, resistance cases have been reported due to long-time antibiotic usage. This research aims to allow LF to react with antioxidant dihydroxybenzoic acid (DHBA), which has low antimicrobial activity, to produce a more stable compound under water and lighting conditions and improve LF's potency. The experiment begins with a screening to select potential DHBA isomers that can react with LF and predict the stoichiometric ratio using phase diagrams, which show that 2,6-DHBA and 3,5-DHBA are prospective antioxidants that can react with LF in a (1:1) molar ratio. Multicomponent systems are prepared by dissolving the LF-DHBA mixture in (1:1) ethanol-methanol (95% grade) and evaporating it. Then, the new solid phase formation is confirmed by thermal analysis and powder X-ray diffractometry. Next, infrared spectrophotometry and neutron magnetic resonance analyses are used to identify the LF-DHBA's interactions. Finally, single-crystal X-ray diffractometry is used to solve the three-dimensional structure of the multicomponent system. We then conduct a hygroscopicity and stability test followed by a lighting and potency test using the microdilution method. Our data reveal that both reactions produce salts, which are named LF-26 and LF-35, respectively. Structurally, LF-26 is found in an anhydrous form with a triclinic crystal packing, while LF-35 is a hemihydrate in a monoclinic system. Afterward, both salts are proven more stable regarding water adsorption and UV lighting than LF. Finally, both multicomponent systems have an approximately two-fold higher antibiotic potency than LF. LF-26 and LF-35 are suitable for further development in solid and liquid dosage formulations, especially LF-35, which has superior stability compared with LF-26.

Quantum Dot-Induced Blue Shift of Surface Plasmon Spectroscopy

We experimentally demonstrate the spectral blue shift of surface plasmon resonance through the resonant coupling between quantum dots (QDs) and surface plasmons, surprisingly in contrast to the conventionally observed red shift of plasmon spectroscopy. Multimode optical fibers are used for extended resonant coupling of surface plasmons with excited states of QDs adsorbed to the plasmonic metal surface. The long-lived nature of excited QDs permits QD-induced negative change in the local refractive index near the plasmonic metal surface to cause such a blue shift. The analysis utilizes the physical causality-driven optical dispersion relation, the Kramers-Kronig (KK) relation, attempting to understand the abnormal behavior of the QDs-induced index dispersion extracted from blue shift measurement. Properties of QDs' gain spectrally resonating with plasmons can account for such blue shift, though their absorbance properties never allow the negative index change for the blue shift observed according to the KK relation. We also discuss the limited applicability of the KK relation and possible QDs gain saturation for the experiment-theory disagreement. This work may contribute to the understanding of the photophysical properties critical for plasmonic applications, such as plasmonic local index engineering required in analyte labeling QDs coupled with plasmons for biomedical imaging or assay.

Synthesis and Physicochemical Characteristics of Chitosan-Based Polyurethane Flexible Foams

The use of shrimp waste to obtain chitosan (Ch) is an essential issue, considering a circular economy, waste management, and its application to environmentally friendly materials. In this study, northern prawn shells were utilized to obtain Ch, which could then be used for synthesizing chitosan-based polyurethane (PUR+Ch) foams with different Ch concentration. The chemical structure, morphology, hardness, thermal properties, viscoelastic properties, and sorption properties in relation to oil and water of these materials were determined. The results present that the addition of Ch into PUR influences the physicochemical characteristics and properties of the tested materials. PUR+Ch foams with 1–3 wt% Ch had more open cells and were softer than neat PUR. PUR+Ch1 had the best thermal properties. PUR+Ch2 foam with 2 wt% Ch as a whole was characterized as having the highest water sorption. The PUR+Ch1 foam with 1 wt% Ch had the best oil sorption. This paper shows that the modification of PUR by Ch is a very promising solution, and PUR+Ch foams can be applied in the water treatment of oil spills, which can be dangerous to the water environment.

Light-Activated Adhesion and Debonding of Underwater Pressure-Sensitive Adhesives

Pressure-sensitive adhesives (PSAs) such as sticky notes and labels are a ubiquitous part of modern society. PSAs with a wide range of peel adhesion strength are designed by tailoring the bulk and surface properties of the adhesive. However, designing an adhesive with strong initial adhesion but showing an on-demand decrease in adhesion has been an enduring challenge in the design of PSAs. To address this challenge, we designed alkoxyphenacyl-based polyurethane (APPU) PSAs that show a photoactivated increase and decrease in peel strength. With increasing time of light exposure, the failure mode of our PSAs shifted from cohesive to adhesive failure, providing residue-free removal with up to 83% decrease in peel strength. The APPU-PSAs also adhere to substrates submerged underwater and show a similar photoinduced decrease in adhesion strength.

Engineering High-Spin State Cobalt Cations in Spinel Zinc Cobalt Oxide for Spin Channel Propagation and Active Site Enhancement in Water Oxidation

Spinel zinc cobalt oxide (ZnCo₂ O₄ ) is not considered as a superior catalyst for the electrochemical oxygen evolution reaction (OER), which is the bottleneck reaction in water-electrolysis. Herein, taking advantage of density functional theory (DFT) calculations, we find that the existence of low-spin (LS) state cobalt cations hinders the OER activity of spinel zinc cobalt oxide, as the t_2g ⁶ e_g ⁰ configuration gives rise to purely localized electronic structure and exhibits poor binding affinity to the key reaction intermediate. Increasing the spin state of cobalt cations in spinel ZnCo₂ O₄ is found to propagate a spin channel to promote spin-selected charge transport during OER and generate better active sites for intermediates adsorption. The experiments find increasing the calcination temperature a facile approach to engineer high-spin (HS) state cobalt cations in ZnCo₂ O₄ , while not working for Co₃ O₄ . The activity of the best spin-state-engineered ZnCo₂ O₄ outperforms other typical Co-based oxides.

Application of Shrimp Waste for the Synthesis of Polyurethane–Chitosan Materials with Potential Use in Sorption of Oil Micro-Spills in Water Treatment

Shrimp waste is a common waste in seafood processing. It is used as part of the fish meal which is added to feed. Bearing in mind the Green Deal and sustainability development, it was proposed to use northern prawn shells to obtain chitosan (Ch), which could then be used for polyurethane (PUR) modification. In ports, oil micro-spills often flow into the waters of gulfs and, consequently, into the sea. Systematic chemical and petroleum water pollution may pose a threat to flora and fauna. In this study, chitosan, which was obtained from shrimp shells, was used to synthesize polyurethane–chitosan foams (PUR+Ch) with different chitosan concentrations. Selected physico-chemical and sorption properties in relation to oil and water of these materials were determined. It was found that the amount of Ch added to the foam affected its morphology, hardness, density, and thermal and sorption properties. PUR foam with a 1.5% weight of Ch was characterized as having the highest water and oil sorption. The advantages of the tested material as an innovative product with potentially significant proecological values were estimated using strengths–weaknesses–opportunities–threats (SWOT) analysis. The conducted preliminary research made it possible to demonstrate the use of these materials in the processes of water treatment with the mentioned micropollutants.

Predicted Studies of Branched and Cross-Linked Polyurethanes Based on Polyhydroxybutyrate with Polycaprolactone Triol in Soft Segments

The number of cross-links in the non-linear polyurethane structure is the basic factor affecting its properties. Selected properties of aliphatic polyurethanes with soft segments made of different amounts of polycaprolactonetriol, polycaprolactonediol and synthetic, telechelic poly([R,S]-3-hydroxybutyrate) were determined. On the basis of changes in polyurethane properties, the correlation between these properties and the construction of soft segments was found. The structure of polyurethanes, their morphology, hydrophilicity, thermal and mechanical properties were examined. These properties were changed linearly up to 15% content of polycaprolactonetriol in soft segments. A further increase in the amount of triol causes that these properties are mainly determined by the high number of cross-links.

Influence of Polyol/Crosslinker Blend Composition on Phase Separation and Thermo-Mechanical Properties of Polyurethane Thin Films

Polyurethanes (PUs) from Polyethylene glycol (PEG) and polycaprolactone diol (PCL) and a crosslinker, Pentaerythritol (PE), were synthetized with isophorone diisocyanate (IPDI). In this study, we investigated the effect of polyol and crosslinker composition on phase separation and thermo-mechanical properties. The properties were studied through dynamic mechanical analysis, X-ray scattering, atomic force microscopy (AFM), and thermogravimetric analysis (TGA). The results showed changes in PUs properties, microphase structure, and separation due to the composition of polyol/crosslinker blend. So, the largest concentration of PE produced multimodal loss factor patterns, indicating segment segregation while PUs with a PEG/PCL = 1 displayed a monomodal loss factor pattern, indicating a homogeneously distributed microphase separation. Additionally, the increase of the PEG concentration enhanced the damping capacity. On the other hand, agglomeration and thread-like structures of hard segments (HS) were observed through AFM. Finally, the thermal behavior of PUs was affected by chemical composition. Lower concentration of PE reduced the crosslinking; hence, the temperature with the maximum degradation rate.

Morphology and Physicochemical Properties of Branched Polyurethane/Biopolymer Blends

The aim of this study is the analyze the structure of branched polyurethanes based on synthetic poly([R,S]-3-hydroxybutyrate) and their blends with biopolymers and montmorillonite. The properties which would predict the potential susceptibility of these materials to degradation are also estimated. Fourier-transform infrared spectroscopy with attenuated total reflection analysis shows that poly([d,l]-lactide) is on the surfaces of polyurethanes, whereas chitosan and starch are included inside the blend network. Atomic force microscopy images have shown that the surfaces of investigated samples are heterogenous with the formation of spherulites in case of pure polyurethanes. The presence of biopolymers in the blend reduced the crystallinity of polyurethanes. Thermal stability of blends of polyurethanes with poly([d,l]-lactide) and polysaccharides decreased in comparison to pure polyurethanes. Although the tensile strength is reduced after the blending of polyurethanes with biopolymers, the elongation at break increased, especially in the case of polyurethane/poly([d,l]-lactide) blends. The presence of polysaccharides in the obtained blends caused the significant reduction of contact angle after one minute from water drop immersion. This hydrophilizing effect is the highest when montmorillonite has been incorporated into the chitosan blend. The estimated properties of the obtained materials suggest their potential sensitivity on environmental conditions.