Kinetic, Isotherm, and Thermodynamic Studies for Ag(I) Adsorption Using Carboxymethyl Functionalized Poly(glycidyl methacrylate)

Preparation of polyethyleneimine modified cellulose/nano-CdS composite aerogel and its photocatalytic properties for organic dyes under visible light

Organic dyes are extensively used in industries such as textiles and printing, contributing to the increasing discharge of wastewater and posing significant risks to human health. Conventional photocatalysts, including metal oxides and sulfides, often exhibit limited pollutant adsorption capacities and suffer from charge carrier recombination. In this study, we synthesized a novel composite aerogel via the lyophilization of cellulose modified with polyethyleneimine and cadmium sulfide. This composite demonstrated exceptional efficacy in degrading of methyl orange (MO) and methylene blue (MB). The composite exhibits a unique three-dimensional structure characterized by a multitude of uneven pores, providing abundant active sites favorable for catalytic reactions. Furthermore, the material shows significant light absorption within the visible spectrum and has a low band gap. Under optimized conditions, the removal efficiencies of MO and MB reached 99.56 % and 100 %, respectively. After five consecutive cycles, the degradation rates of MO and MB remained high at 83 % and 87 %, respectively, showcasing excellent photocatalytic activity and stability. The amino and hydroxyl groups within the composite act as electron donors during photocatalytic reactions, with reaction kinetics following a quasi-first-order model. The mechanism of dye removal by the composite involves a synergistic interplay between adsorption and photocatalytic reduction, underscoring its potential for efficient wastewater treatment.

Unleashing the power of polymeric nanoparticles - Creative triumph against antibiotic resistance: A review

Antibiotic resistance (ABR) poses a universal concern owing to the widespread use of antibiotics in various sectors. Nanotechnology emerges as a promising solution to combat ABR, offering targeted drug delivery, enhanced bioavailability, reduced toxicity, and stability. This comprehensive review explores concepts of antibiotic resistance, its mechanisms, and multifaceted approaches to combat ABR. The review provides an in-depth exploration of polymeric nanoparticles as advanced drug delivery systems, focusing on strategies for targeting microbial infections and contributing to the fight against ABR. Nanoparticles revolutionize antimicrobial approaches, emphasizing passive and active targeting. The role of various molecules, including small molecules, antimicrobial peptides, proteins, carbohydrates, and stimuli-responsive systems, is being explored in recent research works. The complex comprehension mechanisms of ABR and strategic use of nanotechnology present a promising avenue for advancing antimicrobial tactics, ensuring treatment efficacy, minimizing toxic effects, and mitigating development of ABR. Polymeric nanoparticles, derived from natural or synthetic polymers, are crucial in overcoming ABR. Natural polymers like chitosan and alginate exhibit inherent antibacterial properties, while synthetic polymers such as polylactic acid (PLA), polyethylene glycol (PEG), and polycaprolactone (PCL) can be engineered for specific antibacterial effects. This comprehensive study provides a valuable source of information for researchers, healthcare professionals, and policymakers engaged in the urgent quest to overcome ABR.

Bottlebrush Polymers for Articular Joint Lubrication: Influence of Anchoring Group Chemistry on Lubrication Properties

The role of carboxylic, aldehyde, or epoxide groups incorporated into bottlebrush macromolecules as anchoring blocks (or cartilage-binding blocks) is investigated by measuring their lubricating properties and cartilage-binding effectiveness. Mica modified with amine groups is used to mimic the cartilage surface, while bottlebrush polymers functionalized with carboxylic, aldehyde, or epoxide groups played the role of the lubricant interacting with the cartilage surface. We demonstrate that bottlebrushes with anchoring blocks effectively reduce the friction coefficient on modified surfaces by 75-95% compared to unmodified mica. The most efficient polymer appears to be the one with epoxide groups, which can react spontaneously with amines at room temperature. In this case, the value of the friction coefficient is the lowest and equals 0.009 ± 0.001, representing a 95% reduction compared to measurements on nonmodified mica. These results show that the presence of the functional groups within the anchoring blocks has a significant influence on interactions between the bottlebrush polymer and cartilage surface. All synthesized bottlebrush polymers are also used in the preliminary lubrication tests carried out on animal cartilage surfaces. The developed materials are very promising for future in vivo studies to be used in osteoarthritis treatment.

Recovery of Ag(I) from Wastewater by Adsorption: Status and Challenges

Untreated or inadequately treated silver-containing wastewater may pose adverse effects on hu-man health and the ecological environment. Currently, significant progress has been made in the treatment of Ag(I) in wastewater using adsorption methods, with adsorbents playing a pivotal role in this process. This paper provides a systematic review of various adsorbents for the recovery and treatment of Ag(I) in wastewater, including MOFs, COFs, transition metal sulfides, metal oxides, biomass materials, and other polymeric materials. The adsorption mechanisms of these materials for Ag(I) are elaborated upon, along with the challenges currently faced. Furthermore, insights into optimizing adsorbents and developing novel adsorbents are proposed in this study.

Development of Antioxidant and Antimicrobial Membranes Based on Functionalized and Crosslinked Chitosan for Tissue Regeneration

Tissue engineering is an interdisciplinary field that develops new methods to enhance the regeneration of damaged tissues, including those of wounds. Polymer systems containing bioactive molecules can play an important role in accelerating tissue regeneration, mitigating inflammation process, and fighting bacterial infection. Chitosan (CS) has attracted much attention regarding its use in wound healing system fabrication thanks to its biocompatibility, biodegradability, and the presence of functional groups in its structure. In this work, bioactive chitosan-based membranes were obtained by both chemical and physical modifications of the polymer with glycidyl methacrylate and glycerol (GLY), respectively. The most suitable GLY concentration to obtain wound healing systems with good elongation at break, a good water vapor transmission rate (WVTR), and good wettability values was 20% (w/w). Afterwards, the membranes were crosslinked with different concentrations of ethylene glycol dimethacrylate (EGDMA). By using a concentration of 0.05 mM EGDMA, membranes with a contact angle and WVTR values suitable for the application were obtained. To make the system bioactive, 3,4-dihydrocinnamic acid (HCAF) was introduced into the membranes, either by imbibition or chemical reaction, using laccase as a catalyst. Thermal and mechanical analyses confirmed the formation of a cohesive network, which limited the plasticizing effect of GLY, particularly when HCAF was chemically bound. The HCAF-imbibed membrane showed a good antioxidant and antimicrobial activity, highlighting the potential of this system for the treatment of wound healing.

Antibacterial and angiogenic potential of iron oxide nanoparticles-stabilized acrylate-based scaffolds for bone tissue engineering applications

Pickering emulsion polymerization, stabilized by inorganic nanoparticles such as iron oxide nanoparticles (IONPs), can be used to fabricate scaffolds with the desired porosity and pore size. These nanoparticles create stable emulsions that can be processed under harsh polymerization conditions. IONPs, apart from serving as an emulsifier, impart beneficial bioactivities such as antibacterial and pro-angiogenic activity. Here, we coated IONPs with three different weights of oleic acid (5.0 g, 7.5 g, and 10.0 g) to synthesize oleic acid-IONPs (OA-IONPs) that possess the desired hydrophobicity (contact angle > 100°). Next, glycidyl methacrylate and trimethylolpropane triacrylate were polymerized using the Pickering emulsion polymerization technique stabilized by the OA-IONPs. The physicochemical properties of the resulting porous scaffolds were thoroughly characterized using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometry (VSM), and a universal testing machine (UTM). The SEM images confirmed the formation of a porous scaffold. The IONPs content, measured using inductively coupled plasma mass spectrometry (ICP-MS), was in the range of 22-26 µg/mg of the scaffold. The mechanical strengths of the scaffolds were in the range of cancellous bone. The degradation profile of the scaffolds varied between 29% and 41% degradation over 30 days. In vitro cytotoxicity studies conducted using the fibroblast (L929) and osteosarcoma (MG-63) cell lines proved that these scaffolds were non-toxic. SEM images showed that the MG-63 cells adhered firmly to the scaffolds and exhibited a well-spread morphology. The antibacterial activity was confirmed by percentage inhibition studies, SEM analysis of bacterial membrane distortion, and reactive oxygen species (ROS) generation in the bacteria. Chick chorioallantoic membrane assay showed that the total vessel length and branch points were significantly increased in the presence of the scaffolds. These results confirm the pro-angiogenic potential of the fabricated scaffolds. The physicochemical, mechanical, and biological properties of the material suggest that the developed scaffolds would be suitable for bone tissue engineering applications.

CVD Deposited Epoxy Copolymers as Protective Coatings for Optical Surfaces

Copolymer thin films of glycidyl methacrylate (GMA), ethylene glycol dimethacrylate (EGDMA) and 2,4,6,8-tetramethyl-2,4,6,8-tetravinylcyclotetrasiloxane (V4D4) were synthesized via initiated chemical vapor deposition (iCVD) as protective coatings for optical surfaces. Chemical durability in various solvents, corrosion resistance, adhesion to substrate, thermal resistance and optical transmittance of the films were evaluated. Crosslinked thin films exhibited high chemical resistance to strong organic solvents and excellent adhesion to substrates. Poly(GMA-co-EGDMA) and poly(GMA-co-V4D4) copolymers demonstrated protection against water (<1% thickness loss), high salt resistance (<1.5% thickness loss), and high optical transparency (~90% in visible spectrum) making them ideal coating materials for optical surfaces. Combining increased mechanical properties of GMA and chemical durability V4D4, the iCVD process provides a fast and low-cost alternative for the fabrication of protective coatings.

Introducing photo-crosslinked bio-nanocomposites based on polyvinylidene fluoride/poly(glycerol azelaic acid)-g-glycidyl methacrylate for bone tissue engineering

As a glycerol-based polyester, poly(glycerol azelaic acid) (PGAz) has shown great potential for biomedical applications, such as tissue engineering. However, it tends to show low mechanical strength and a relatively fast biodegradation rate, limiting its capability of mimicking and supporting a broad range of hard tissues such as bone. Moreover, the typical thermal curing process of poly(glycerol-co-diacids) is one of their drawbacks. To overcome these limitations, glycidyl methacrylate (GMA) moieties were first grafted on the backbone of PGAz herein to achieve a UV-curable PGAz-g-GMA (PGAG) resin. Then polyvinylidene fluoride (PVDF), nano-hydroxyapatite, and Cloisite Na⁺ nanoclay were used to fabricate photo-crosslinked PGAG/PVDF nanocomposites with efficient properties to mimic various hard tissues. Our results demonstrated that all nanocomposites possessed a semi-crystalline structure with noticeable PVDF β-phase fraction. The scaffolds yielded Young's modulus, ultimate tensile strength, and elongation at break of 15-24 MPa, 13-15 MPa, and 50-65%, respectively that could meet the requirements for supporting cancellous bone tissue. The presence of nanofillers improved the hydrophilicity and slightly accelerated the biodegradation rate of the scaffolds. Additionally, it was illustrated that the scaffolds had no noticeable in vitro cytotoxicity, and mouse fibroblast L929 cells and osteoblast MG-63 cells attached to and proliferated on their surface desirably. Our findings indicate that the PGAG/PVDF blend and its nanocomposites could be high-potential candidates for a range of hard tissues, specifically cancellous bones.

Chitosan-G-Glycidyl Methacrylate/Au Nanocomposites Promote Accelerated Skin Wound Healing

Herein, we report the synthesis of Au nanoparticles (AuNPs) in chitosan (CTS) solution by chemically reducing HAuCl₄. CTS was further functionalized with glycidyl methacrylate (chitosan-g-glycidyl methacrylate/AuNP, CTS-g-GMA/AuNP) to improve the mechanical properties for cellular regeneration requirements of CTS-g-GMA/AuNP. Our nanocomposites promote excellent cellular viability and have a positive effect on cytokine regulation in the inflammatory and anti-inflammatory response of skin cells. After 40 days of nanocomposite exposure to a skin wound, we showed that our films have a greater skin wound healing capacity than a commercial film (TheraForm^®), and the presence of the collagen allows better cosmetic ave aspects in skin regeneration in comparison with a nanocomposite with an absence of this protein. Electrical percolation phenomena in such nanocomposites were used as guiding tools for the best nanocomposite performance. Our results suggest that chitosan-based Au nanocomposites show great potential for skin wound repair.

Chelating polymers with valuable sorption potential for development of precious metal recycling technologies

A special attention is currently focused on the recovery of Au, Ag, Pt, Pd and Rh from both primary and secondary sources. From the wide range of sorbents that have been used in this respect, the required selectivity is proved only by the chelating polymers containing donor N, O and S atoms in their functional groups. This work presents the recent published researches on this topic, pointing out the capabilities of chelating sorbents based on organic synthetic polymers for a sustainable development. The chelating sorbents are differentiated and reviewed according to their synthesis strategy and compatibility with synthetic and real matrices. First, an overview on the novel functionalized polymers and impregnated resins with good selectivity for the recovery of most valuable precious metals from synthetic leach solutions is given. Subsequently, the performances of these materials in the selective and preconcentrative recovery of Au, Ag, Pt, Pd and Rh from simulated and real leachates are discussed. The viability of an integrated approach for the determination of precious metals from simulated solutions by solid phase spectrometry is highlighted. The transposition of chelating polymers’ potential in challenging technologies for precious metal recovery-reuse-recycling needs further research on directions that are proposed.

Synthesis, Characterization and Sorption Capacity Examination for a Novel Hydrogel Composite Based on Gellan Gum and Graphene Oxide (GG/GO)

A novel hydrogel composite based on gellan gum and graphene oxide (GG/GO) was synthesized, characterized and tested for sorption capacity in this work. The microstructural, thermogravimetric and spectroscopic analysis confirmed the formation of the GG/GO composite. Comparative batch sorption experiments revealed a sorption capacity of the GG/GO composite for Zn (II) ions of approximately 2.3 higher than that of pure GG. The GG/GO composite exhibits a maximum sorption capacity of 272.57 mg/g at a pH of Zn (II) initial solution of 6. Generally, the sorption capacity of the sorbents is approximately 1.5 higher in slightly acidic conditions (pH 6) comparative with that for strong acidic conditions (pH 3). The sorption isotherms revealed that the sorption followed a monolayer/homogenous behavior. The sorption kinetic data were well fitted by the pseudo-second-order kinetic model, and were consistent with those derived from sorption isotherms. The intraparticle diffusion was considered to be the rate-determining step. Two main sorption mechanisms for Zn (II) were identified namely, ion exchange at low pH values, and both ion exchange and chemisorption in weekly acidic conditions.

Enhanced Simultaneous Nitrogen and Phosphorus Removal in A Denitrifying Biological Filter Using Waterworks Sludge Ceramsite Coupled with Iron-Carbon

In this study, waterworks sludge ceramsite (WSC) was combined with 3% iron-carbon matrix in a denitrifying biological filter (ICWSC-DNBF) to enhance the simultaneous removal of carbon, nitrogen and phosphorus in secondary effluent of wastewater treatment plant (SE-WTP). The chemical oxygen demand (COD) and nitrogen removal, as well as phosphorus removal and the adsorbed forms of phosphorus were measured and the removal mechanism of these pollutants by the ICWSC-DNBF system for treating SE-WTP were investigated. The results showed that the ICWSC-DNBF achieved good removals of COD, NH₄⁺-N, NO₃^--N, total N and total P; effluent concentrations were 17.23 mg/L, 3.72 mg/L, 14.32 mg/L, 17.38 mg/L and 0.82 mg/L, respectively. WSC enhanced the P removal due to its high specific surface area and the high number of adsorption sites. Fe-P and Al-P were the main forms of P adsorbed by WSC, accounting for 78.53% of the total adsorbed P. WSC coupled with Fe and C improved the biodegradability of SE-WTP and promoted the removal of organic matter. The removal of N was attributed to the abundant denitrifying microorganisms in the system and the electrochemical effect produced by the internal electrolysis of Fe and C.

Application of Response Surface Methodology and Desirability Function in the Optimization of Adsorptive Remediation of Arsenic from Acid Mine Drainage Using Magnetic Nanocomposite: Equilibrium Studies and Application to Real Samples

A magnetic multi-walled carbon nanotube/zeolite nanocomposite was applied for the adsorption and removal of arsenic ions in simulated and real acid mine drainage samples. The adsorption mechanism was investigated using two-parameter (Langmuir, Freundlich, Temkin) and three-parameter (Redlich–Peterson, and Sips) isotherm models. This was done in order to determine the characteristic parameters of the adsorptive removal process. The results showed that the removal process was described by both mono- and multilayer adsorptions. Adsorption studies demonstrated that a multi-walled carbon nanotube/zeolite nanocomposite could efficiently remove arsenic in simulated samples within 35 min. Based on the Langmuir isotherm, the adsorption capacity for arsenic was found to be 28 mg g⁻¹. The nanocomposite was easily separated from the sample solution using an external magnet and the regeneration was achieved by washing the adsorbent with 0.05 mol L⁻¹ hydrochloric acid solution. Moreover, the nanoadsorbent was reusable for at least 10 cycles of adsorption-desorption with no significant decrease in the adsorption capacity. The nanoadsorbent was also used for the arsenic removal from acid mine drainage. Overall, the adsorbent displayed excellent reusability and stability; thus, they are promising nanoadsorbents for the removal of arsenic from acid mine drainage.