Microporous Materials Based on Norbornadiene-Based Cross-Linked Polymers

Synthesis of Polynorbornadiene within the Pores of Activated Carbons: Effects on EDLC and Hydrogen Adsorption Performances

Norbornadiene (NBD) is adsorbed on activated carbon (AC), and the adsorbed NBD is polymerized within the pores of AC. Two kinds of ACs─AC-2 with only micropores of ∼2 nm and AC-4 with not only micropores but also mesopores below 4 nm─are examined to study the effects of the hybridized polynorbornadiene (PNBD) on the electric double-layer capacitor and hydrogen adsorption performance. Various measurements are performed to determine the form of the hybridized PNBD inside the pores of AC. Scanning and transmittance electron microscopy observations of the AC/PNBD hybrids confirm that PNBD is hybridized inside the pores of AC, and there is little PNBD on the surface of AC particles. The nitrogen adsorption/desorption measurement for the hybrids of AC-4 reveals that PNBD is not hybridized preferentially inside micropores rather than mesopores irrespective of the amount of PNBD. In addition, both micropore and mesopore volumes decrease at a constant rate with increasing amounts of PNBD. These results suggest that PNBD is hybridized not as a layer but as an agglomerate for both ACs, and the agglomerate delocalizes over the whole AC pores, which is supported by the results of electrochemical measurements and hydrogen adsorption behavior of the hybrids.

Synthesis and Gas Transport Properties of Addition Polynorbornene with Perfluorophenyl Side Groups

Polynorbornenes represent a fruitful class of polymers for structure–property study. Recently, vinyl-addition polynorbornenes bearing side groups of different natures were observed to exhibit excellent gas permeation ability, along with attractive C₄H₁₀/CH₄ and CO₂/N₂ separation selectivities. However, to date, the gas transport properties of fluorinated addition polynorbornenes have not been reported. Herein, we synthesized addition polynorbornene with fluoroorganic substituents and executed a study on the gas transport properties of the polymer for the first time. A norbornene-type monomer with a C₆F₅ group, 3-pentafluorophenyl-exo-tricyclononene-7, was successfully involved in addition polymerization, resulting in soluble, high-molecular-weight products obtained in good or high yields. By varying the monomer concentration and monomer/catalyst ratio, it was possible to reach M_w values of (2.93–4.35) × 10⁵. The molecular structure was confirmed by NMR and FTIR analysis. The contact angle with distilled water revealed the hydrophobic nature of the synthesized polymer as expected due to the presence of fluoroorganic side groups. A study of the permeability of various gases (He, H₂, O₂, N₂, CO₂, and CH₄) through the prepared polymer disclosed a synergetic effect, which was achieved by the presence of both bulky perfluorinated side groups and rigid saturated main chains. Addition poly(3-pentafluorophenyl-exo-tricyclononene-7) was more permeable than its metathesis analogue by a factor of 7–21, or the similar polymer with flexible main chains, poly(pentafluorostyrene), in relation to the gases tested. Therefore, this investigation opens the door to fluorinated addition polynorbornenes as new potential polymeric materials for membrane gas separation.

Microporous Organic Polymers: Synthesis, Characterization, and Applications

The presence of a certain degree of porosity in polymers is a feature that provides them with unique properties and with opportunities to be exploited in a number of technologically important applications [...].

Polyvinylnorbornene Gas Separation Membranes

Polynorbornenes are already used in a wide range of applications. They are also considered materials for polymer gas separation membranes because of their favorable thermal and chemical resistance, rigid backbone and varied chemistry. In this study, the use of 5-vinyl-2-norbornene (VNB), a new monomer in the field of gas separations, is investigated by synthesizing two series of polymers via a vinyl-addition polymerization. The first series investigates the influence of the VNB content on gas separation in a series of homo and copolymers with norbornene. The second series explores the influence of the crosslinking of polyvinylnorbornene (pVNB) on gas separation. The results indicate that while crosslinking had little effect, the gas separation performance could be fine-tuned by controlling the VNB content. As such, this work demonstrates an interesting way to significantly extend the fine-tuning possibilities of polynorbornenes for gas separations.