Conducting Polymer Grafting: Recent and Key Developments

Nitroxide radical contrast agents for safe magnetic resonance imaging: progress, challenges, and perspectives

Magnetic resonance imaging (MRI) is considered one of the most valuable diagnostic technologies in the 21st century. To enhance the image contrast of anatomical features, MRI contrast agents have been widely used in clinical MRI diagnosis, especially those based on gadolinium, manganese, and iron oxide. However, these metal-based MRI contrast agents show potential toxicity to patients, which urges researchers to develop novel MRI contrast agents that can replace metal-based MRI contrast agents. Metal-free nitroxide radical contrast agents (NRCAs) effectively overcome the shortcomings of metal-based contrast agents and also have many advantages, including good biocompatibility, prolonged systemic circulation time, and easily functionalized structures. Importantly, since NRCAs acquire MRI signals with standard tissue water 1H relaxation mechanisms, they have great potential to realize clinical translation among many metal-free MRI contrast agents. At present, NRCAs have been proposed as an effective substitute for metal-based MRI contrast agents. Herein, this review first briefly introduces NRCAs, including their composition, classification, mechanism of action, application performances and advantages. Then, this review highlights the progress of NRCAs, including small molecule-based NRCAs and polymer-based NRCAs. Finally, this review also discusses the challenges and future perspectives of NRCAs.

Highly flexible yet strain-insensitive conjugated polymer

Imparting excellent electrical properties, mechanical robustness, suppleness, conduction stability during deformation, and self-healing to intrinsic conducting polymers is a challenging endeavor. The reversibly interlocked macromolecular networks (RILNs) approach is utilized to tackle this problem. Specifically, poly(3,4-ethylenedioxythiophene) (PEDOT) is mixed with flexible polysulfonic acid networks crosslinked by reversible Diels-Alder bonds, while rigid polyaniline networks crosslinked by reversible Schiff base bonds act as molecular staples. Owing to the joint actions of the doping effect of polyaniline on PEDOT, the specific interlocking architecture and synergy between the component materials, the electrical conductivity (59.3-980.5 S cm-1), tensile strength (8.4-81.6 MPa) and elongation at break (44.5-411.0%) of the resultant PEDOT/RILNs films is significantly tunable according to different usage scenarios by adjusting the PEDOT content from 1.48 to 22.24 wt%. More importantly, the electrical resistance of PEDOT/RILNs remains constant during not only a single large extension and deflection but also repeated stretching (up to 1500 cycles) and bending (up to 106 cycles). The built-in reversible covalent bonds enable the PEDOT/RILNs to autonomously restore damaged mechanical and electrical performance. These record-breaking results and the demonstration of self-powered sensor made of PEDOT/RILNs suggest that the proposed approach successfully satisfies various conflicting requirements of flexible electronics regarding the properties of conducting polymers.

Degradable π-Conjugated Polymers

The integration of next-generation electronics into society is rapidly reshaping our daily interactions and lifestyles, revolutionizing communication and engagement with the world. Future electronics promise stimuli-responsive features and enhanced biocompatibility, such as skin-like health monitors and sensors embedded in food packaging, transforming healthcare and reducing food waste. Imparting degradability may reduce the adverse environmental impact of next-generation electronics and lead to opportunities for environmental and health monitoring. While advancements have been made in producing degradable materials for encapsulants, substrates, and dielectrics, the availability of degradable conducting and semiconducting materials remains restricted. π-Conjugated polymers are promising candidates for the development of degradable conductors or semiconductors due to the ability to tune their stimuli-responsiveness, biocompatibility, and mechanical durability. This perspective highlights three design considerations: the selection of π-conjugated monomers, synthetic coupling strategies, and degradation of π-conjugated polymers, for generating π-conjugated materials for degradable electronics. We describe the current challenges with monomeric design and present options to circumvent these issues by highlighting biobased π-conjugated compounds with known degradation pathways and stable monomers that allow for chemically recyclable polymers. Next, we present coupling strategies that are compatible for the synthesis of degradable π-conjugated polymers, including direct arylation polymerization and enzymatic polymerization. Lastly, we discuss various modes of depolymerization and characterization techniques to enhance our comprehension of potential degradation byproducts formed during polymer cleavage. Our perspective considers these three design parameters in parallel rather than independently while having a targeted application in mind to accelerate the discovery of next-generation high-performance π-conjugated polymers for degradable organic electronics.

Enhancing the Washing Durability and Electrical Longevity of Conductive Polyaniline-Grafted Polyester Fabrics

The demand for wearable electronics has driven the development of conductive fabrics, particularly those incorporating polyaniline (PANI) that is known for its high electrical conductivity, flexibility, and ease of fabrication. However, the limited stability and durability of the conductive fabric, especially during washing, present significant challenges. The drawbacks can be traced by weak physical attachment between the fabric and the conductive coating, leading to a decrease in conductivity over time. These drawbacks significantly impact the fabric's functionality and performance, highlighting the need for effective solutions to enhance its stability and durability. This study focuses on addressing these challenges by employing a thermochemical treatment. A hydrophilic surface of the polyester fabric is obtained after the treatment (hydrolysis), followed by grafting of PANI on it. The adhesion between PANI and the polyester fabrics was found to be enhanced, as proved by contact angle analysis. Furthermore, the PANI-hydrolyzed fabrics (treated) demonstrated stable conductivity (∼10-3 S cm-3) even after 10 washing cycles, showcasing their excellent durability. In comparison, the unhydrolyzed PANI fabric experienced a drop in conductivity by three orders of magnitude. X-ray photoelectron spectroscopy via N 1s core line spectra showed chemical shifts and quantified the level of doping through PANI's protonation level. We found that PANI-hydrolyzed fabrics preserved their dedoping level from 44.77 to 42.68%, indicating improved stability and extension of their electrical properties' lifetime after washing as compared to unhydrolyzed (untreated) fabrics, from 36.99 to 26.61%. This investigation demonstrates that the thermochemical approach can effectively enhance the durability of conductive PANI fabrics, enabling them to withstand the washing process while preserving their electrical endurance.

Polymer Grafting and its chemical reactions

Polymer grafting is a technique to improve the morphology, chemical, and physical properties of the polymer. This technique has the potential to improve the existing conduction and properties of polymers other than charge transport; as a result, it enhances the solubility, nano-dimensional morphology, biocompatibility, bio-communication, and other property of parent polymer. A polymer's physicochemical properties can be modified even further by creating a copolymer with another polymer or by grafting. Here in the various chemical approaches for polymer grafting, like free radical, click reaction, amide formation, and alkylation have been discussed with their importance, moreover the process and its importance are covered comprehensively with their scientific explanation. The present review also covers the effectiveness of the graft-to approaches and its application in various fields, which will give reader a glimpse about polymer grafting and its uses.

Brush-like Polyaniline with Optical and Electroactive Properties at Neutral pH and High Temperature

In this research, a brush-like polyaniline (poly(2-acrylamide-2-methyl-1-propanesulfonate)-g-polyaniline)-b-poly(N-vinylcarbazole) (BL PAni) was developed as a strategy to overcome the limited processability and dedoping above pH 4 of conventional polyaniline (PAni). For the BL PAni synthesis, RAFT polymerization (homopolymer), RAFT-mediated surfactant-free emulsion polymerization (block copolymer), and interfacial oxidative polymerization were applied to graft the PAni chains. NMR and FT-IR spectroscopies were performed to confirm the structural elucidation of the reaction pathways, while the thermal properties were analyzed by TGA and DSC. Notably, the BL PAni presents absorption throughout the visible region and up to the near-infrared, showing dedoping resistance at up to 80 °C and at a neutral pH. The absorption range of the BL PAni, block copolymer, and homopolymer were studied by UV–Vis spectroscopy in solid-state and dispersion/solution, highlighting BL PAni and poly(anilinium 2-acrylamide-2-methyl-1-propanesulfonate)-b-poly(N-vinylcarbazole) (PAAMP-b-PVK) due to the π-stacking between the anilinium and carbazole groups. The cyclic voltammetry confirmed the persistence of electroactivity at a pH near 7.

Light-Triggered Polymersome-Based Anticancer Therapeutics Delivery

Polymersomes are biomimetic cell membrane-like model structures that are self-assembled stepwise from amphiphilic copolymers. These polymeric (nano)carriers have gained the scientific community's attention due to their biocompatibility, versatility, and higher stability than liposomes. Their tunable properties, such as composition, size, shape, and surface functional groups, extend encapsulation possibilities to either hydrophilic or hydrophobic cargoes (or both) and their site-specific delivery. Besides, polymersomes can disassemble in response to different stimuli, including light, for controlling the "on-demand" release of cargo that may also respond to light as photosensitizers and plasmonic nanostructures. Thus, polymersomes can be spatiotemporally stimulated by light of a wide wavelength range, whose exogenous response may activate light-stimulable moieties, enhance the drug efficacy, decrease side effects, and, thus, be broadly employed in photoinduced therapy. This review describes current light-responsive polymersomes evaluated for anticancer therapy. It includes light-activable moieties' features and polymersomes' composition and release behavior, focusing on recent advances and applications in cancer therapy, current trends, and photosensitive polymersomes' perspectives.

Thermo/pH dual-responsive micelles based on the host-guest interaction between benzimidazole-terminated graft copolymer and β-cyclodextrin-functionalized star block copolymer for smart drug delivery

Novel temperature and pH dual-sensitive amphiphilic micelles were fabricated exploiting the host-guest interaction between benzimidazole-terminated PHEMA-g-(PCL-BM) and β-CD-star-PMAA-b-PNIPAM. The fabricated graft copolymer had a brush-like structure with star side chains. The micelles were utilized as dual-responsive nanocarriers and showed the LCST between 40 and 41 °C. The acidic pH promoted the dissociation of the PHEMA-g-(PCL-BM: β-CD-star-PMAA-b-PNIPAM) micelles. DOX.HCl was loaded into the core of the micelles during self-assembly in an aqueous solution with a high encapsulation efficacy (97.3%). The average size of the amphiphilic micelles was about 80 nm, suitable size for the enhanced permeability and retention effect in tumor vasculature. In an aqueous environment, these micelles exhibited very good self-assembly ability, low CMC value, rapid pH- and thermo-responsiveness, optimal drug loading capacity, and effective release of the drug. The biocompatibility was confirmed by the viability assessment of human breast cancer cell line (MCF-7) through methyl tetrazolium assay. DOX-loaded micelles displayed excellent anti-cancer activity performance in comparison with free DOX.

Well-defined polyindole–Au NPs nanobrush as a platform for electrochemical oxidation of ethanol

Over the recent decades, conducting polymers have received great interest in many fields including microelectronics, energy conversion devices, and biosensing due to their unique properties like electrical conductivity, stability, and simple synthesis. Modification of conducting polymers with noble metals e.g. gold enhances their properties and opens new opportunities to also apply them in other fields like electrocatalysis. Here, we focus on the synthesis of hybrid material based on polyindole (PIN) nanobrush modified with gold nanoparticles and its application towards electrooxidation of ethanol. The paper presents systematic studies from synthesis to electrochemical sensing applications. For the characterization of PIN–Au composites, scanning electron microscopy and X-ray diffraction analyses were used. The electrocatalytic performance of the proposed hybrid material towards alcohol oxidation was studied in alkaline media by cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy techniques. The results show that PIN–Au hybrid can be employed as an effective and sensitive platform for the detection of alcohols, which makes it a promising material in electrocatalysis or sensors. Moreover, the proposed composite exhibits electrocatalytic activity towards ethanol oxidation, which combined with its good long-term stability opens the opportunity for its application in fuel cells.

New Light in Polymer Science: Photoinduced Reversible Addition-Fragmentation Chain Transfer Polymerization (PET-RAFT) as Innovative Strategy for the Synthesis of Advanced Materials

Photochemistry has attracted great interest in the last decades in the field of polymer and material science for the synthesis of innovative materials. The merging of photochemistry and reversible-deactivation radical polymerizations (RDRP) provides good reaction control and can simplify elaborate reaction protocols. These advantages open the doors to multidisciplinary fields going from composite materials to bio-applications. Photoinduced Electron/Energy Transfer Reversible Addition-Fragmentation Chain-Transfer (PET-RAFT) polymerization, proposed for the first time in 2014, presents significant advantages compared to other photochemical techniques in terms of applicability, cost, and sustainability. This review has the aim of providing to the readers the basic knowledge of PET-RAFT polymerization and explores the new possibilities that this innovative technique offers in terms of industrial applications, new materials production, and green conditions.