Aggregation-Induced Emission Properties in Fully π-Conjugated Polymers, Dendrimers, and Oligomers

Tuning Optical Properties of Organic Thin Films through Intermolecular Interactions - Fundamentals, Advances and Strategies

In applications ranging from photon-energy conversion into electrical or chemical forms (such as photovoltaics or photocatalysis) to numerous sensor technologies based on organic solids, the role of supramolecular structures and chromophore interactions is crucial. This review comprehensively examines the critical intermolecular interactions between organic dyes and their impact on optical properties. We explore the range of changes in absorption or emission properties observed in molecular aggregates compared to single molecules. Each effect is dissected to reveal its physicochemical foundations, relevance to different application domains, and documented examples from the literature that illustrate the potential modulation of absorption or emission properties by molecular and supramolecular structural adjustments. This work aims to serve as a concise guide for exploiting supramolecular phenomena in the innovation of novel optical and optoelectronic organic materials, with emphasis on strategic application and exploitation.

Oligo(styryl)benzenes liposomal AIE-dots for bioimaging and phototherapy in an in vitro model of prostate cancer

Whilst the development of advanced organic dots with aggregation-induced emission characteristics (AIE-dots) is being intensively studied, their clinical translation in efficient biotherapeutic devices has yet to be tackled. This study explores the synergistic interplay of oligo(styryl)benzenes (OSBs), potent fluorogens with an increased emission in the aggregate state, and Indocyanine green (ICG) as dual Near Infrared (NIR)-visible fluorescent nanovesicles with efficient reactive oxygen species (ROS) generation capacity for cancer treatment using photodynamic therapy (PDT). The co-loading of OSBs and ICG in different nanovesicles has been thoroughly investigated. The nanovesicles' physicochemical properties were manipulated via molecular engineering by modifying the structural properties of the lipid bilayer and the number of oligo(ethyleneoxide) chains in the OSB structure. Diffusion Ordered Spectroscopy (DOSY) NMR and spectrofluorometric studies revealed key differences in the structure of the vesicles and the arrangement of the OSB and ICG in the bilayer. The in vitro assessment of these OSB-ICG nanovesicles revealed that the formulations can increase the temperature and generate ROS after photoirradiation, showing for the first time their potential as dual photothermal/photodynamic (PTT/PDT) agents in the treatment of prostate cancer. Our study provides an exciting opportunity to extend the range of applications of OSB derivates to potentiate the toxicity of phototherapy in prostate and other types of cancer.

Fluorescent polymer as a biosensing tool for the diagnosis of microbial pathogens

Diseases and diagnoses are predominant in the human population. Early diagnosis of etiological agents plays a vital role in the treatment of bacterial infections. Existing standard diagnostic platforms are laborious, time-consuming, and require trained personnel and cost-effective procedure, though they are producing promising results. These shortcomings have led to a thirst for rapid diagnostic procedures. Fluorescence-based diagnosis is one of the efficient rapid diagnostic methods that rely on specific and sensitive bacterial detection. Emerging bio-sensing studies on conducting polymers (CPs) are gaining popularity in medical diagnostics due to their promising properties of high fluorescence efficiency, good light stability, and low cytotoxicity. Poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV), is the first identified soluble polymer and model material for understanding the fundamental photophysics of conventional CPs. In this present study, MEH-PPV is used as a fluorescent dye for direct pathogen detection applications by interacting with the microbial cell surface. An optimized concentration of MEH-PPV solution used to confirm the presence of selective bacterial structures. The present study endeavours towards bacterial detection based on the emission from bacteria due to interfacial interaction between polymer and bacterial surface.

Dye Modified Phenylenediamine Oligomers: Theoretical Studies on Drug Binding for Their Potential Application in Drug Sensors

The present work reports, for the first time, synthesis of dye incorporated o-phenylenediamine (OBB) with a view to obtain a conjugated oligomer with enhanced functionality. The structure was confirmed by IR studies, while the electronic transitions were confirmed by UV visible studies. The dye modified oligomer showed one order higher fluorescence intensity than the pristine Bismarck Brown (BB) dye. Confocal imaging showed red emission which could be utilized in near infra-red imaging. Density functional theory (DFT) studies were carried out to predict the theoretical properties of the oligomers. The energies of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital orbital were computed to explore how the HOMO energies of the reactants initiated the electronic interactions between them. The interaction energies were correlated to conjugation/hyper conjugation stabilization energies of the natural bond orbitals (NBO) via the DFT method using the B3LYP functional with the 6-311G(d) basis set on Gaussian 09 software. Drug binding was evaluated through simulation of interaction energy, (ΔEA-x) with drugs such as captopril, propranolol, thiazide, and fentanyl. The results predicted that the oligomer could be developed into a fentanyl drug sensor.

Polymers and Polymer-Based Materials for the Detection of (Nitro-)explosives

Methods for the remote detection of warfare agents and explosives have been in high demand in recent times. Among the several detection methods, fluorescence methods appear to be more convenient due to their low cost, simple operation, fast response time, and naked-eye-visible sensory response. For fluorescence methods, a large variety of fluorescent materials, such as small-molecule-based fluorophores, aggregation-induced emission fluorophores/materials, and supramolecular systems, have been reported in the literature. Among them, fluorescent (bio)polymers/(bio)polymer-based materials have gained wide attention due to their excellent mechanical properties and sensory performance, their ability to recognize explosives via different sensing mechanisms and their combinations, and, finally, the so-called amplification of the sensory response. This review provides the most up-to-date data on the utilization of polymers and polymer-based materials for the detection of nitroaromatic compounds (NACs)/nitro-explosives (NEs) in the last decade. The literature data have been arranged depending on the polymer type and/or sensory mechanism.

Fluorescent and Magnetic Radical Dendrimers as Potential Bimodal Imaging Probes

Dual or multimodal imaging probes have emerged as powerful tools that improve detection sensitivity and accuracy in disease diagnosis by imaging techniques. Two imaging techniques that are complementary and do not use ionizing radiation are magnetic resonance imaging (MRI) and optical fluorescence imaging (OFI). Herein, we prepared metal-free organic species based on dendrimers with magnetic and fluorescent properties as proof-of-concept of bimodal probes for potential MRI and OFI applications. We used oligo(styryl)benzene (OSB) dendrimers core that are fluorescent on their own, and TEMPO organic radicals anchored on their surfaces, as the magnetic component. In this way, we synthesized six radical dendrimers and characterized them by FT-IR, ¹H NMR, UV-Vis, MALDI-TOF, SEC, EPR, fluorimetry, and in vitro MRI. Importantly, it was demonstrated that the new dendrimers present two properties: on one hand, they are paramagnetic and show the ability to generate contrast by MRI in vitro, and, on the other hand, they also show fluoresce emission. This is a remarkable result since it is one of the very few cases of macromolecules with bimodal magnetic and fluorescent properties using organic radicals as the magnetic probe.

Fluorescence by self-assembly: autofluorescent peptide vesicles and fibers

A series of oxidized cysteinyl peptides ([P-Cys-X-OMe]₂; P = Boc or H; X = Trp or Glu) showed vesicular and fibrillar assemblies. The anatomy of the self-assembled vesicles from the water-soluble cystine peptide [Cys-Trp-OMe]₂ (1a) has been investigated by using various fluorescent probes such as ammonium 8-anilinonaphthalene-1-sulfonate, Nile Red and pyrene. The morphological characterization was carried out by fluorescence lifetime imaging microscopy (FLIM) and super resolution-structured illumination microscopy (SR-SIM) utilizing the autofluorescence of the vesicles stemming from the self-assembly. The self-assembled structures are also observed in solution as evident from the quantitative phase images obtained using a dual-mode digital holographic microscope (DHM) system. Present investigations show that the self-assembly is enthalpy- and entropy-driven in the aqueous medium. Based on the CD spectral studies, we proposed that 1a organizes into vesicles through the sequestration of indole units. We observed that the solutions of dipeptides 1a-b exhibit autofluorescence in the blue region upon excitation at a wavelength >350 nm. Detailed spectroscopic studies on the peptides lacking tryptophan 2a-b unequivocally showed that the autofluorescence stems exclusively from peptide aggregation. Our experimental results with appropriate controls revealed that the clustering of carbonyl chromophores is central to autofluorescence. Autofluorescence was also used to probe the vesicle formation without using any external fluorescent probe. To the best of our knowledge, this is the first report on autofluorescent vesicles formed by the spontaneous association of dipeptides. We also found that the vesicles formed by 1a can act as a host for guests like C₆₀. The biocompatibility and biodegradability of these peptides along with the autofluorescent nature and guest binding ability of peptide-based vesicles offer numerous applications in the biomedical area.

Adsorption of Dye Molecules and Its Potential for the Development of Photoactive Hybrid Materials Based on Layered Silicates

The present paper gives a brief account of the latest advances in understanding of the mechanism and implications of dye adsorption with a special focus on layered silicate surfaces. It has been clearly demonstrated that the controlled adsorption of novel or already well-known dyes has equally great yet unexplored potential. In principle, the well-engineered surface confinement of the molecules may lead to their aggregation, adsorption, or intercalation-induced fluorescence emission even with conventional dyes, which are not considered as luminophores in solutions or in the solid state. We envision the utilization of silicate-based heterogeneous systems to produce novel polymer blended films or structured liquids, as well as to develop a plethora of other photophysical and biomedical applications.

Yellow to blue switching of fluorescence by the tuning of the pentaphenylphosphole structure: phosphorus electronic state vs. ring conjugation

The interaction between diphenylacetylene and dichlorophenylphosphine under various conditions is a simple method for the preparation of pentaphenylphosphole derivatives exhibiting fluorescence properties. Depending on the electronic state of the various centers of the phospholic structure, it was possible to obtain molecules with fluorescence, as in the blue area for 1,2,3,4,5-pentaphenyl-2,5-dihydro-phosphole-1-oxide (H₂PPPO), in the yellow area for 1,2,3,4,5-pentaphenylphosphole-1-oxide (PPPO) and in the cyan area for 1,2,3,4,5-pentaphenylphosphole (PPP). The effect of the structure and π-conjugation on the optical properties of these compounds was studied using PPP derivatives as examples. Unusual changes in the optical properties of PPP derivatives in solution and in the crystalline state are explained. In the case of agglomeration of PPPO and PPP molecules, the effect of aggregation-induced emission (AIE) was observed to have weak fluorescence in solution and strong fluorescence in the aggregated state. However, for H₂PPPO, the AIE effect remains mild. With the help of experimental studies, supported by theoretical calculations, the main mechanism of the optical properties of pentaphenylphosphole derivatives has been revealed. It was observed that the intramolecular motions of PPPO and PPP are more limited in the solid state than the motions of H₂PPPO, which is associated with less conjugation of the phenyl rotors of H₂PPPO. The analysis of the structure and distribution of electron density showed why hydrogenation of the phosphole ring leads to a sharp change in the optical properties of pentaphenylphosphole derivatives, while the oxidation of phosphorus does not lead to the disappearance of the AIE effect and to a lesser extent affects the change in the fluorescence wavelength. Thus, it was shown how the regulation of various structural features of the phospholic ring helps to control the optical properties of such compounds.

Synthesis of Poly(arylenevinylene)s by Rhodium-Catalyzed Stitching Polymerization/Alkene Isomerization

Poly(arylenevinylene)s constitute an important class of π-conjugated polymers for their potential utility as optoelectronic materials. Herein, we developed a sequence of rhodium-catalyzed stitching polymerization of 1,2-dialkynyl(hetero)arenes and aromatization-driven alkene isomerization for the synthesis of new poly(arylenevinylene)s. The polymerization and subsequent alkene isomerization proceeded smoothly with high degree of stitching efficiency by employing a Rh/tfb complex as the catalyst, and not only diynes but also triynes and tetraynes could be polymerized to give poly(arylenevinylene)s that are not easily accessible by existing synthetic methods. The polymers obtained by the present method were thermally stable, and their optical properties could be varied depending on the repeating unit structure.

Highly fluorescent carbon nitride oligomer with aggregation-induced emission characteristic for plastic staining

Polymeric carbon nitride often displays weak photoluminescence in solid state due to the aggregation-caused quenching effect. Herein, highly fluorescent carbon nitride oligomer (CNO) with aggregation-induced emission (AIE) characteristic was prepared via one-step solid-phase thermal condensation of 2,4-diamino-6-phenyl-1,3,5-triazine (DPT) at 350 °C. CNO is mainly composed of DPT dimer connected by rotatable imine groups, and exhibits weak fluorescence in the dispersed state and strong blue-green emission in the aggregated state and solid state. Density functional theory calculations indicate that the restriction of phenyl and triazine ring twisting motions is the main origin of the AIE phenomenon of CNO. Finally, CNO was preliminarily applied for fluorescent staining of plastic pellets. This work not only provides a solid-state strategy to synthesize fluorescent material with AIE characteristic but also extends the application of polymeric carbon nitride.

Fluorescent Polymers Conspectus

The development of luminescent materials is critical to humankind. The Nobel Prizes awarded in 2008 and 2010 for research on the development of green fluorescent proteins and super-resolved fluorescence imaging are proof of this (2014). Fluorescent probes, smart polymer machines, fluorescent chemosensors, fluorescence molecular thermometers, fluorescent imaging, drug delivery carriers, and other applications make fluorescent polymers (FPs) exciting materials. Two major branches can be distinguished in the field: (1) macromolecules with fluorophores in their structure and (2) aggregation-induced emission (AIE) FPs. In the first, the polymer (which may be conjugated) contains a fluorophore, conferring photoluminescent properties to the final material, offering tunable structures, robust mechanical properties, and low detection limits in sensing applications when compared to small-molecule or inorganic luminescent materials. In the latter, AIE FPs use a novel mode of fluorescence dependent on the aggregation state. AIE FP intra- and intermolecular interactions confer synergistic effects, improving their properties and performance over small molecules aggregation-induced, emission-based fluorescent materials (AIEgens). Despite their outstanding advantages (over classic polymers) of high emission efficiency, signal amplification, good processability, and multiple functionalization, AIE polymers have received less attention. This review examines some of the most significant advances in the broad field of FPs over the last six years, concluding with a general outlook and discussion of future challenges to promote advancements in these promising materials that can serve as a springboard for future innovation in the field.

A Brief Overview of Polymers Science and Technology, in Spain

This Special Issue State-of-the-Art on Polymer Science and Technology in Spain is comprised of a collection of 42 publications/contributions related to very different topics undertaken by the numerous research groups working in Spain in Polymer Science and Technology. This monograph collects the contributions of more than 200 different authors from 24 different national Institutions (>30 different centers/departments) from Universities and CSIC centers distributed throughout the whole of Spain. Two-thirds of the contributions to this Special Issue arise from Institutional collaborations, half of which are international collaborations with European research groups and the other half with other international research groups outside Europe including China, Australia or United States of America among others. This brief overview communication provides a general overview of the research lines in Polymer Science and Technology covered in Spain and show most of the representative polymer groups and their distribution throughout Spain. Most of Spanish polymer groups belong to the Grupo Especializado de Polímeros (GEP) being part of the European Polymer Federation (EPF). It also shows how Spanish science about polymers is positioned at European level.

Altering Chain Flexibility of Aliphatic Polyesters for Yellow-Green Clusteroluminescence in 38 % Quantum Yield

Preparation of non-conjugated polymers with long-wavelength emission and high quantum yield (QY) is still a huge challenge. Herein, we report the first example of linear non-conjugated polyester exhibiting yellow-green clusteroluminescence (CL) and a high QY of 38 %. We discovered that the polyester P3 with balanced flexibility and rigidity showed the longest CL wavelength and highest QY. Systematically photophysical characterization unravel the key role of ester cluster in the CL and the cluster formation via the aggregate of ester units was visualized. Moreover, P3 was demonstrated to be a highly selective, quick-responsive (ca. 1.2 min) and sensitive detector (detection limit is 0.78 μM) for irons owing to the fast disassociation of clusters by irons. This work not only gains further mechanistic insight into CL but also provides a new strategy to design high-efficiency and long-wavelength CL, meanwhile, enlightens the glorious application prospect of luminescent polyester.

Molecular Encapsulation of Naphthalene Diimide (NDI) Based π-Conjugated Polymers: A Tool for Understanding Photoluminescence

Conjugated polymers are an important class of chromophores for optoelectronic devices. Understanding and controlling their excited state properties, in particular, radiative and non-radiative recombination processes are among the greatest challenges that must be overcome. We report the synthesis and characterization of a molecularly encapsulated naphthalene diimide-based polymer, one of the most successfully used motifs, and explore its structural and optical properties. The molecular encapsulation enables a detailed understanding of the effect of interpolymer interactions. We reveal that the non-encapsulated analogue P(NDI-2OD-T) undergoes aggregation enhanced emission; an effect that is suppressed upon encapsulation due to an increasing π-interchain stacking distance. This suggests that decreasing π-stacking distances may be an attractive method to enhance the radiative properties of conjugated polymers in contrast to the current paradigm where it is viewed as a source of optical quenching.