Biotechnological Aspects and Mathematical Modeling of the Biodegradation of Plastics under Controlled Conditions

Microplastic pollution in marine environments: An in-depth analysis of advanced monitoring techniques, removal technologies, and future challenges

Microplastics, recognized as toxic contaminants, have pervaded terrestrial, atmospheric, and marine environments, transitioning from emerging pollutants to pervasive threats. About 10 % of the plastic produced worldwide enters into the ocean which constitutes 85 % of marine litter. Microplastic distribution holds the highest concentration in the Atlantic Ocean whereas the Southern Ocean holds the lowest. Concerning microplastics, reports state that each year about 1.3 million metric tons of microplastics enter the ocean. The microparticles account for about 90 % of the floating ocean debris and over 75 % of these particles originate from land-based sources which include urban runoff, and mismanaged wastes. This review offers a thorough examination of the sources of microplastics and their environmental consequences and ecological impacts. The ubiquity of microplastics necessitates robust control measures, starting with their monitoring and detection in aquatic ecosystems to assess the effectiveness of mitigation strategies. Current removal methods, including physical, chemical, and bio-based techniques, are detailed, alongside advances in filtration, separation, and integrated hybrid approaches for microplastic control. The review concludes with perspectives on the limitations of existing methods and directions for future research in microplastic monitoring, detection, and removal.

Comprehensive analysis of bioplastics: life cycle assessment, waste management, biodiversity impact, and sustainable mitigation strategies

Bioplastics are emerging as a promising alternative to traditional plastics, driven by the need for more sustainable options. This review article offers an in-depth analysis of the entire life cycle of bioplastics, from raw material cultivation to manufacturing and disposal, with a focus on environmental impacts at each stage. It emphasizes the significance of adopting sustainable agricultural practices and selecting appropriate feedstock to improve environmental outcomes. The review highlights the detrimental effects of unsustainable farming methods, such as pesticide use and deforestation, which can lead to soil erosion, water pollution, habitat destruction, and increased greenhouse gas emissions. To address these challenges, the article advocates for the use of efficient extraction techniques and renewable energy sources, prioritizing environmental considerations throughout the production process. Furthermore, the methods for reducing energy consumption, water usage, and chemical inputs during manufacturing by implementing eco-friendly technologies. It stresses the importance of developing robust disposal systems for biodegradable materials and supports recycling initiatives to minimize the need for new resources. The holistic approach to sustainability, including responsible feedstock cultivation, efficient production practices, and effective end-of-life management. It underscores the need to evaluate the potential of bioplastics to reduce plastic pollution, considering technological advancements, infrastructure development, and increased consumer awareness. Future research should focus on enhancing production sustainability, understanding long-term ecological impacts, and advancing bioplastics technology for better performance and environmental compatibility. This comprehensive analysis of bioplastics' ecological footprint highlights the urgent need for sustainable solutions in plastic production.

Polyurethane degradation by extracellular urethanase producing bacterial isolate Moraxella catarrhalis strain BMPPS3

Plastic waste has become a global issue and a threat to the ecosystem. The present study isolated polyurethane (PU) degrading bacterial species from soil dumped with plastic wastes. Four bacterial isolates, RS1, RS6, RS9 and RS13 were obtained and their ability to degrade PU in a synthetic medium with PU as a sole source of carbon was assessed individually. After thirty days of incubation, the highest PU weight loss of 67.36 ± 0.32% was recorded in the medium containing RS13 isolate. The results of FTIR revealed the occurrence of carbonyl peaks. The putative isolate RS13 confirmed with the genus Moraxella according to 16S rRNA gene sequencing and the isolate was specified as Moraxella catarrhalis strain BMPPS3. The restriction analysis of Moraxella catarrhalis strain BMPPS3 revealed that the GCAT content to 51% and 49% correspondingly. Moraxella catarrhalis strain BMPPS3 was able to colonize on PU surface and form a biofilm as revealed by SEM investigation. Fatty acids and alkanes were found to be the degradation products by GC-MS analysis. The presence of these metabolites facilitated the growth of strain RS13 and suggested that ester hydrolysis products had been mineralized into CO2 and H2O. Extracellular biosurfactant synthesis has also been found in Moraxella catarrhalis strain BMPPS13 inoculated with synthetic media and mineral salt media containing PU and glucose as carbon sources, respectively with a significant level of cell-surface hydrophobicity (32%). The production and activity of extracellular esterase showed consistent increase from day 1-15 which peaked (1.029 mM/min/mg) on day 24 significantly at P < 0.001. Crude biosurfactants were lipopeptide-based, according to the characteristic investigation. According to this study findings, Moraxella catarrhalis produces biosurfactants of the esterase, urethanase and lipase (lipopeptide) types when carbon source PU is present.

Microbial Biofilms: Features of Formation and Potential for Use in Bioelectrochemical Devices

Microbial biofilms present one of the most widespread forms of life on Earth. The formation of microbial communities on various surfaces presents a major challenge in a variety of fields, including medicine, the food industry, shipping, etc. At the same time, this process can also be used for the benefit of humans-in bioremediation, wastewater treatment, and various biotechnological processes. The main direction of using electroactive microbial biofilms is their incorporation into the composition of biosensor and biofuel cells This review examines the fundamental knowledge acquired about the structure and formation of biofilms, the properties they have when used in bioelectrochemical devices, and the characteristics of the formation of these structures on different surfaces. Special attention is given to the potential of applying the latest advances in genetic engineering in order to improve the performance of microbial biofilm-based devices and to regulate the processes that take place within them. Finally, we highlight possible ways of dealing with the drawbacks of using biofilms in the creation of highly efficient biosensors and biofuel cells.

Effects of turning aeration and the initial carbon/nitrogen ratio on the biodegradation of polylactic acid under controlled conditions

Plastic pollution is primarily caused by the accumulation of petroleum-derived plastics, as they tend to degrade slowly. Sustainable alternatives to these materials are bio-based and biodegradable plastics, such as polylactic acid (PLA). In this study, we assessed how turning aeration and the initial carbon/nitrogen (C/N) ratio impact PLA biodegradation. The study was carried out under controlled composting conditions, over 180 days, with the aim of decreasing the biodegradation time of the PLA. Apple pomace, rice husk, grape pomace compost, and PLA were used as substrates in the composting process. The experiments were conducted using three types of turning aeration: without turning, one turn per week, and two turns per week. Three initial C/N ratios were used: 20, 30, and 40. A stepwise temperature ramp was designed and implemented to simulate industrial composting conditions, which influence microbial activity and thus the rate of decomposition of substrates, including PLA. The data showed behavior; hence, a nonlinear regression model based on the logistic growth equation was used to predict the PLA biodegradation at the end of the composting process. The results showed that two turns per week with an initial C/N ratio of 30 or 40 led to a 90 % biodegradation of the PLA in 130 days. This degradation was verified by Fourier-Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM).

Novel methods to monitor the biodegradation of polylactic acid (PLA) by Amycolatopsis orientalis and Amycolatopsis thailandensis

Plastics are essential in modern life, but their conventional production is problematic due to environmental pollution and waste management issues. Polylactic acid (PLA) is a widely used bioplastic that is bio-based and biodegradable, making it a key player in the bioeconomy. PLA has been proven to be degradable in various settings, including aqueous, soil, and compost environments. However, monitoring and optimizing PLA biodegradation remains challenging. This study proposes methods to improve the quantification of PLA biodegradation by Amycolatopsis spp. Ultrasound treatments (10 s) significantly improved the enumeration of viable Amycolatopsis cells by breaking the pellets into quantifiable individual cells. A separation technique combining ultrasound (120 s) and 40 μm cell strainers effectively isolated PLA particles from biomass to quantify PLA weight loss. This enabled the monitoring of PLA biofragmentation. Finally, CO2 production was measured according to ISO 14852 to quantify mineralization. Integrating these methods provides an improved quantification for PLA biodegradation along its different stages. In a case study, this led to the construction of a carbon balance where 85.1% of initial carbon content was successfully tracked. The developed techniques for monitoring of PLA biodegradation are essential to design future waste management strategies for biodegradable plastics.

Assessment of biodegradation of lignocellulosic fiber-based composites - A systematic review

Lignocellulosic fiber-reinforced polymer composites are the most extensively used modern-day materials with low density and better specific strength specifically developed to render better physical, mechanical, and thermal properties. Synthetic fiber-reinforced composites face some serious issues like low biodegradability, non-environmentally friendly, and low disposability. Lignocellulosic or natural fiber-reinforced composites, which are developed from various plant-based fibers and animal-based fibers are considered potential substitutes for synthetic fiber composites because they are characterized by lightweight, better biodegradability, and are available at low cost. It is very much essential to study end-of-life (EoL) conditions like biodegradability for the biocomposites which occur commonly after their service life. During biodegradation, the physicochemical arrangement of the natural fibers, the environmental conditions, and the microbial populations, to which the natural fiber composites are exposed, play the most influential factors. The current review focuses on a comprehensive discussion of the standards and assessment methods of biodegradation in aerobic and anaerobic conditions on a laboratory scale. This review is expected to serve the materialists and technologists who work on the EoL behaviour of various materials, particularly in natural fiber-reinforced polymer composites to apply these standards and test methods to various classes of biocomposites for developing sustainable materials.

Unveiling Fragmentation of Plastic Particles during Biodegradation of Polystyrene and Polyethylene Foams in Mealworms: Highly Sensitive Detection and Digestive Modeling Prediction

It remains unknown whether plastic-biodegrading macroinvertebrates generate microplastics (MPs) and nanoplastics (NPs) during the biodegradation of plastics. In this study, we utilized highly sensitive particle analyzers and pyrolyzer-gas chromatography mass spectrometry (Py-GCMS) to investigate the possibility of generating MPs and NPs in frass during the biodegradation of polystyrene (PS) and low-density polyethylene (LDPE) foams by mealworms (Tenebrio molitor larvae). We also developed a digestive biofragmentation model to predict and unveil the fragmentation process of ingested plastics. The mealworms removed 77.3% of ingested PS and 71.1% of ingested PE over a 6-week test period. Biodegradation of both polymers was verified by the increase in the δ13C signature of residual plastics, changes in molecular weights, and the formation of new oxidative functional groups. MPs accumulated in the frass due to biofragmentation, with residual PS and PE exhibiting the maximum percentage by number at 2.75 and 7.27 μm, respectively. Nevertheless, NPs were not detected using a laser light scattering sizer with a detection limit of 10 nm and Py-GCMS analysis. The digestive biofragmentation model predicted that the ingested PS and PE were progressively size-reduced and rapidly biodegraded, indicating the shorter half-life the smaller plastic particles have. This study allayed concerns regarding the accumulation of NPs by plastic-degrading mealworms and provided critical insights into the factors controlling MP and NP generation during macroinvertebrate-mediated plastic biodegradation.

Biodegradability of Gel-Forming Superabsorbents for Soil Conditioning: Kinetic Assessment Based on CO2 Emissions

Quantification of the biodegradability of soil water superabsorbents is necessary for a reasonable prediction of their stability and functioning. A new methodological approach to assessing the biodegradability of these polymer materials has been implemented on the basis of PASCO (USA) instrumentation for continuous registration of kinetic CO2 emission curves in laboratory incubation experiments with various hydrogels, including the well-known trade brands Aquasorb, Zeba, and innovative Russian Aquapastus composites with an acrylic polymer matrix. Original kinetic models were proposed to describe different types of respiratory curves and calculate half-life indicators of the studied superabsorbents. Comparative analysis of the new approach with the assessment by biological oxygen demand revealed for the first time the significance of CO2 dissolution in the liquid phase of gel structures during their incubation. Experiments have shown a tenfold reduction in half-life up to 0.1-0.3 years for a priori non-biodegradable synthetic superabsorbents under the influence of compost extract. The incorporation of silver ions into Aquapastus innovative composites at a dose of 0.1% or 10 ppm in swollen gel structures effectively increases their stability, prolonging the half-life to 10 years and more, or almost twice the Western stability standard for polymer ameliorants.

Recent progress of bioplastics in their properties, standards, certifications and regulations: A review

The environmental impact associated with fossil fuel-based polymers has paved the way to explore biopolymer-based plastics, their properties, and their applications. Bioplastics are polymeric materials that are greatly interesting due to their eco-friendlier and non-toxic nature. In recent years, exploring the different sources of bioplastics and their applications has become one of the active research areas. Biopolymer-based plastics have applications in food packaging, pharmaceuticals, electronics, agricultural, automotive and cosmetic sectors. Bioplastics are considered safe, but there are several economic and legal challenges to implementing them. Hence, this review aims to i) outline the terminology associated with bioplastics, its global market, major sources, types and properties of bioplastics, ii) discuss the major bioplastic waste management and recovery options, iii) provide the major standards and certifications regarding bioplastics, iv) explore the various country-wise regulations and restrictions associated with bioplastics, and v) enumerate the various challenges and limitations associated with bioplastics and future directions. Therefore, providing adequate knowledge about various bioplastics, their properties and regulatory aspects can be of great importance in the industrialization, commercialization and globalization of bioplastics to replace petroleum-based products.

Computational Exploration of Bio-Degradation Patterns of Various Plastic Types

Plastic materials are recalcitrant in the open environment, surviving for longer without complete remediation. The current disposal methods of used plastic material are inefficient; consequently, plastic wastes are infiltrating the natural resources of the biosphere. The mixed composition of urban domestic waste with different plastic types makes them unfavorable for recycling; however, natural assimilation in situ is still an option to explore. In this research work, we have utilized previously published reports on the biodegradation of various plastics types and analyzed the pattern of microbial degradation. Our results demonstrate that the biodegradation of plastic material follows the chemical classification of plastic types based on their main molecular backbone. The clustering analysis of various plastic types based on their biodegradation reports has grouped them into two broad categories of C-C (non-hydrolyzable) and C-X (hydrolyzable). The C-C and C-X groups show a statistically significant difference in their biodegradation pattern at the genus level. The Bacilli class of bacteria is found to be reported more often in the C-C category, which is challenging to degrade compared to C-X. Genus enrichment analysis suggests that Pseudomonas and Bacillus from bacteria and Aspergillus and Penicillium from fungi are potential genera for the bioremediation of mixed plastic waste. The lack of uniformity in reporting the results of microbial degradation of plastic also needs to be addressed to enable productive growth in the field. Overall, the result points towards the feasibility of a microbial-based biodegradation solution for mixed plastic waste.

Biotechnological methods to remove microplastics: a review

Microplastics pollution is major threat to ecosystems and is impacting abiotic and biotic components. Microplastics are diverse and highly complex contaminants that transport other contaminants and microbes. Current methods to remove microplastics include biodegradation, incineration, landfilling, and recycling. Here we review microplastics with focus on sources, toxicity, and biodegradation. We discuss the role of algae, fungi, bacteria in the biodegradation, and we present biotechnological methods to enhance degradation, e.g., gene editing tools and bioinformatics.